Digging through more boxes the 1909 Ford parts list shows 2 pins for the differential
-2530 13/32 Long
and T-2531 7/32 Long
but no photo
question is how many of each did it take and is this the correct pins in photo, Bob
Bob, I have an early differential stuck away in a corner that still had straight axles in it. Iíll check it out tomorrow. Kim
Thank you, Bob
Bob, this pin that came out of the diff housing on the right measured .218 by .406. The one on the left is stepped measures .218 by .312 long. A surprise was the fiber spacer found between the axle gear and housing.
thank you, how many of each pin are required?
the short step pin looks like the standard T-2531-B pin