|
|
|
By Larry Smith on Tuesday, June 16, 2009 - 03:07 pm:When you receive your new issue of the Vintage Ford, note on page 23 that the length of the pickup fender iron is LONGER than the touring. The pickup fender iron is actually 1 3/4" longer.
By jack daron-Indy. on Tuesday, June 16, 2009 - 04:57 pm:It's a good article! Thanks for writing it.
By Larry Smith on Wednesday, June 24, 2009 - 10:52 am:When I first posted this note, I had the Vintage Ford, and no one else did. Most of you have it now, so make sure you understand the pickup fender iron pictured on page 23 is longer than the touring. Sorry for the mistake.
By William C Severn on Wednesday, June 24, 2009 - 09:44 pm:How about the photo on the cover. Was that car ever produced as a Right Hand Drive?
Bill
By johnd on Wednesday, June 24, 2009 - 09:46 pm:Larry some of us still don't have it 6-24-09 still not in Mid Missouri
By Larry Smith on Wednesday, June 24, 2009 - 10:12 pm:Yeah, I got an email from a guy in Maine, and he hasn't got his either.
By Noel Denis Chicoine, MD on Wednesday, June 24, 2009 - 10:51 pm:I got mine today!!!
By Mike Perigo on Wednesday, June 24, 2009 - 10:58 pm:Not here in Southern Indiana yet
By David_Cockey on Wednesday, June 24, 2009 - 11:15 pm:North of Detroit today.
By John F. Regan on Wednesday, June 24, 2009 - 11:27 pm:Chicago area today.
By Steve Tomaso on Thursday, June 25, 2009 - 12:59 am:Nicely written article there - Larry !
By David Dewey on Thursday, June 25, 2009 - 01:18 am:N. Calif. yesterday!
By Alex Alongi on Thursday, June 25, 2009 - 01:39 am:San Diego, Saturday. Interesting story on the X engine.
By David Stauffacher on Thursday, June 25, 2009 - 10:54 am:Bill,
Good eye! Can't tell if photo is reversed as plate is reversable and can't read Ford logo on radiator.
By Royce Peterson on Thursday, June 25, 2009 - 11:07 am:Look at the choke pull wire.....
By William C Severn on Thursday, June 25, 2009 - 01:41 pm:Royce,
You are right, the photo is reversed.
Bill
|
|