Head Gasket Question

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2018: Head Gasket Question
Top of pagePrevious messageNext messageBottom of page Link to this message  By John Van Cott on Monday, January 08, 2018 - 03:58 pm:

Should I use a sealant such as Permatex Spray-A-Gasket Copper Hi-Temp or K&W Copper Coat Gasket Compound, on a new copper head gasket during assembly. All surfaces, engine and head have been milled flat. Just want to install the head the proper way. Your advice would be appreciated. Thanks


Top of pagePrevious messageNext messageBottom of page Link to this message  By Tim Williams, Hillsboro Oregon on Monday, January 08, 2018 - 04:05 pm:

I use the copper spray on the gasket, and not had a (knock on wood) problem yet.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jerry VanOoteghem S.E. Michigan on Monday, January 08, 2018 - 04:22 pm:

Copper Coat. :-)


Top of pagePrevious messageNext messageBottom of page Link to this message  By John Van Cott on Monday, January 08, 2018 - 04:34 pm:

Should you apply the sealant to the engine and head surfaces or just both sides of the gasket? Thanks


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jeff Humble on Monday, January 08, 2018 - 04:45 pm:

Copper both sides of gasket


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration