Winfield Model N info

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2018: Winfield Model N info
Top of pagePrevious messageNext messageBottom of page Link to this message  By jim mccathren on Tuesday, January 09, 2018 - 02:31 am:

Howdy! Trying to identify intermediate and high needles on a Winfield 0-620 D. Winfield calls the Model N "non-standard for race cars". No indication of which needle is which on the castings. Assuming this is something like the M Models, the needle on top is the idle since it controls air like the M's. The other 2 needles are on the bottom. The spray tube is a tube within a tube with one needle feeding the inner tube and the other feeding the outer tube.

Which is high and which is intermediate?

Is anyone running one of these willing to count their turns and save this poor boy a lot of frustration?

What are the 2 screws in the bottom of the choke bell for? One shows in the pic, the other is about 90 degrees from it. I can't find anything in the Winfield parts info that would go there.

Any help is greatly appreciated!

Here is the carb:

Here is the spray tube:


Top of pagePrevious messageNext messageBottom of page Link to this message  By Mark Gregush Portland Oregon on Tuesday, January 09, 2018 - 02:45 am:

The one under the choke is probably to hold the pre-heat hose in place.


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration