Looking for a pair of stiker plates for 24 coupe. I would think other closed cars would have used the same plate

Thanks
Mike

Mike if you have one to go by you can get a piece of 1/4 or 3/8 flat plate steel and fabricate one. Find the correct thickness flat, mount it In a good vice and use a reciprocating saw with a metal cutting blade to make the cuts to get the correct T shape.
Then carefully use a bench grinder and do the rest of the shaping. Finish it off by drilling and countersinking the mounting holes.
You may find a good original if your lucky but this is an alternative way to do it if you don't find one. Pretty sure the closed late 23- 25 T's door strikes are the same. They work on right or left doors. Good luck.

Thanks for the idea. If you look in my picture I have a piece of 1/2 that I was going to try just that. I'm still replacing wood so I don't need for a while. Never know what is laying around in drawers or boxes under the workbench. Thanks