Im using this seals ,and the shim in the left axle has cut into the center seal , can i replace the seal in the center,and where can find a number for this seal?,
Thank u lorenzo
I've been through this exercise myself recently except it was the Woodruff key that cut into it.
The seal can be replaced and is a common type 26mm x 40mm x 7mm.
Thank you John
Lorenzo, IF you have it all apart, there should be a number on the seal itself. It may be small (probably considering the size of the seal), it may be on the metal part, it may be on the rubber part.
If you don't have it apart, hopefully someone has the number wrote down the can give you. Or you can talk to Steve at Lang's tomorrow during business hours.