|
|
|
By Verne Shirk on Wednesday, May 02, 2018 - 09:47 pm:I have a question about the "sparker" on an Allen Hand Crank Coil Tester. It appears as thought I've lost the contact to my "sparker". The assembly I have looks to have been repaired a few times and it finally gave up. I'm assuming that the phenolic tube is insulating the contactor so that the spark is directed to the outside of the cylinder the crank is on. You can see what I have. How much of this is original? I'm guessing the bent paperclip isn't. What should it look like?
Thanks!!!
Verne Shirk
Wichita, KS 
By Ron Patterson-Nicholasville, Kentucky on Wednesday, May 02, 2018 - 11:22 pm:Vern
Very recently helped another fellow with the same exact problem on the same type HCCT.
I will send you photos tomorrow AM of the parts you need and a source.
Give me a call upon receipt of photos and I will explain in detail.
Ron
859 881 1677
By Ron Patterson-Nicholasville, Kentucky on Thursday, May 03, 2018 - 08:13 am:Verne
Several photos are in your email.
By Verne Shirk on Thursday, May 03, 2018 - 12:03 pm:Thanks Ron!
I talked to Bob Scherzer like you recommended. He was able to help me with the part I needed.
Verne
By Ron Patterson-Nicholasville, Kentucky on Thursday, May 03, 2018 - 06:16 pm:Here is a photo of the part Verne needed to repair his Allen Electric HCCT.
By Ron Patterson-Nicholasville, Kentucky on Thursday, May 03, 2018 - 06:19 pm:Here is a photo of the part Verne needed to repair his Allen Electric HCCT.
|
|