Sill plates for a 26 coupe any one have pictures

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration
Model T Ford Forum: Forum 2018: Sill plates for a 26 coupe any one have pictures
Top of pagePrevious messageNext messageBottom of page Link to this message  By mike mclean pefferlaw ontario canada on Wednesday, May 16, 2018 - 11:21 pm:

I am just finishing up my 26 Canadian coupe sill plates got a set from langs but they are not going to fit the way they are does anyone have pictures of them so I know what they look like thanks mike


Top of pagePrevious messageNext messageBottom of page Link to this message  By David Harrison on Thursday, May 17, 2018 - 12:53 am:

Here is a clip from a larger picture. I will try to take a better closer photo tomorrow.
Sill plate


Top of pagePrevious messageNext messageBottom of page Link to this message  By Don Booth@ Bay City, Mi on Thursday, May 17, 2018 - 04:23 am:

This is as good as I got from a '26 Coupe. Hope it helps.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Adam Doleshal on Thursday, May 17, 2018 - 08:25 am:

I have an original pair of the style posted in Donís picture. They are stamped zinc and have not been painted. Would like $150 for the pair. P M me if interested.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Jeff Humble Northern Michigan on Thursday, May 17, 2018 - 08:42 am:

Mike,
There were several different ones for the coupe. I have a mid year 1926 coupe made in canada, mine look like the picture David posted. I am unable to attach a picture. Overall length is 10", holes are 8 3/8 apart. They appear to be stamped out of a zinc like sheet metal. Old ones are a dark grey, they polish but do not get as bright as nickel. Those are not reproduced. Model a's have similar but are not the same size.


Top of pagePrevious messageNext messageBottom of page Link to this message  By David Harrison on Saturday, June 02, 2018 - 01:00 am:

Here are some better pictures of my 1927 coupe sill plates. sill plate 1927 coupesill plate


Top of pagePrevious messageNext messageBottom of page Link to this message  By Allan Bennett - Australia on Saturday, June 02, 2018 - 04:56 am:

If anybody needs plates like David shows, I have 4 of them in my swap meet stocks.

Allan from down under.


Top of pagePrevious messageNext messageBottom of page Link to this message  By mike mclean pefferlaw ontario canada on Saturday, June 02, 2018 - 08:52 am:

thanks for the info this one has the holes for the small ones


Top of pagePrevious messageNext messageBottom of page Link to this message  By Terry Woods, Richmond, Texas on Saturday, June 02, 2018 - 10:36 am:

I don't claim to know anything about 26-27 Canadian production. I think that I've heard or read that US produced 26 coupes did not use the zinc plated plates like David Harrison shows, above, but 27's did (at least mine did). Mine do not appear to be as long, maybe 9 inches, give or take a half inch, but certainly not as long as the ones, shown. Tudors did use similar plates that were much longer than coupe's.


Top of pagePrevious messageNext messageBottom of page Link to this message  By Martin E. Moynahan on Thursday, June 28, 2018 - 07:04 am:

Allan, please contact me regarding your June 2, 2018 post regarding sill plates. I believe they are 10 long with holes 8 3/8" on center. Thanks.


Add a Message


This is a private posting area. Only registered users and moderators may post messages here.
Username:  
Password:

Topics Last Day Last Week Tree View    Getting Started Formatting Troubleshooting Program Credits    New Messages Keyword Search Contact Moderators Edit Profile Administration