|
|
|
By CHRIS SHEPPARD on Friday, August 03, 2018 - 05:10 pm:Removing camshaft to replace tappets, have timing cover off, tappets up and cam seems like something is holding it. Cam gear is still on do I just need to wiggle cam around to fit thru bearings ?
Thanks for the help in advance.
By Mark Strange - Hillsboro, MO on Friday, August 03, 2018 - 05:23 pm:The front and middle bearings come out with the cam, look on the side of the block for two retaining bolts.
If you don't have the Ford service manual, you really need to get one. 
https://www.youtube.com/watch?v=AzaeB1t9U5o&list=PLYG_lIhIwKyLG8WQm4tGmKK1nA0Yct p6G&index=11
https://www.youtube.com/watch?v=XIBvuXoAzZw&index=12&list=PLYG_lIhIwKyLG8WQm4tGm KK1nA0Yctp6G
By Bill Thompson, Sudbury MA on Friday, August 03, 2018 - 05:24 pm:There 2 bolts on side of block holding front and center cam bearings. Remove these bolts bearings come out with cam shaft.
By CHRIS SHEPPARD on Saturday, August 04, 2018 - 03:30 pm:gOT IT SECOND BOLT WAS UNDER GENERATOR MOUNT. tHANK YOU FOR THE HELP
|
|