Thank you for visiting the Model T Classified Ads. This is your one-stop web
site for Model T cars, parts, literature and services either
For Sale, Wanted or Trade.
You can post your ad here on-line and within seconds it will be added to the
top of this list for the whole world to see.
If you just submitted an Ad, please press the
Reload/Refresh button on your browser to see your
entry.
This site is for individual restorers/hobbyists only. Please,
no commercial ads. SCAM WARNING
Be aware of people willing to buy
your car or parts from foreign countries and paying with cashier's check plus additional funds
for shipping, whereby they request you to forward they balance to a third party. The cashier's
check may be counterfeit. If a deal seems to good to be true, it likely is.
Parts for SaleJust in SMALL DRUM RUCKSTELL, for details and picture please visit web site at http://modeltauction.com/ProBid/. Also selling for a friend a 24 or 25 turtle back plese emal me for a picture and details. Dave Huson <modelt1912@msn.com> 303-774-9246
2116 Charro Ave., Longmont, Co USA - Mon Mar 15 15:03:07 2010Parts for SaleNice low radiator shell 17 to 23. Car Bud Vase Pairs, Small Drum Ruckstell, 30 x 31/2 demountable Rim, Split Rim Jack, Water Pumps, 26 open car dash, Low speed Trnsmission Drum, Reverse Transmission Drum, Many other parts too numerous to list. For pictures and other information please visit web page http://modeltauction.com/ProBid/. Dave Huson <modelt1912@msn.com> 303-774-9246
2116 Charro Ave., Longmont, Co USA - Mon Mar 15 14:13:33 2010Parts for SaleModel T Depot Hack Body, new, assembled, Golden Oak finish, $1,600.00, will fit in pickup for transportation. Fits up to 1925. Also have two rear fenders for same depot hack and galvanized gas tank $500.00. Call Paul Shaw 413-210-6854. Pictures available on request.
Paul F Shaw 413-210-6854
36 Canal Street, South Hadley, MA 01075 - Mon Mar 15 14:09:22 2010Ad Correction:Forgot to say in previous ad, remove 'NS' from email address if emailing.
Terry A.Woods
Katy, TX USA - Mon Mar 15 00:40:03 2010Parts WantedWanted: Two sets of T-3101-D, crankcase lower cover reinforcements. These are the 'U' shaped pieces of metal with drilled and tapped bolt holes that sit in the bottom of a four dip pan. Need two sets (pair). All threaded holes must be good and usable. Light surface rust, O.K. Cleaned up, even better.
Terry A. Woods <NSmodeltwoods@yahoo.com> 832-659-5881
5110 E. 3rd St. #109, Katy, TX USA - Mon Mar 15 00:37:03 2010Car for Sale:/parts for sale. The truck and trailer are loaded for Chickasha. Some of the stuff on the trailer are 6 early running board brackets, a '22 touring body with fenders running boards splash aprons windshield and a excelent set of top bows, 2 pairs of '23-'25 windshield sanctions, '23-25 windshield with sanctions, coil points, door latches, long nose pan, 2 low heads both are cracked but one is very small, a visor for a '23-'25 open T, a bunch of transmission bands, and a 1910 model t roadster. Our spot space is SE01 which is in the south building.
Dan Protexter <Protexter@Q.comnospam> 712-259-1808
2911 S. Lyons, Sioux City, Iowa USA - Sun Mar 14 23:29:42 2010Parts WantedDial face for a 1914 Stewart model 100 in nice condition. This is the light colored silver plated style. Would consider a whole speedomter as long as the face is good.
Art Hart <arthart@epix.net> 610-847-4614
695 Geigle Hill Road, Ottsville, PA USA - Sun Mar 14 21:45:29 2010Parts for SaleVG Early Brake Drum. This drum is a nice one NO RIVET MARKS, Lugs are good some filing required but not much. Some wear on the brass bushing. Drums are selling as hight as 700.00 in some of the catalogs. For a picture and more information please visit web site at http://modeltauction.com/ProBid/.
Dave Huson <modelt1912@msn.com> 303-774-9246
2116 Charro Ave., Longmont, Co USA - Sun Mar 14 14:14:03 2010Parts for SaleBabbitt bearing items:i will be at Chickasha space FQ11 with 3 sets of old style line reamer units with assorted tooling,my own design linebore units and bearing molds,an early 5 cam bearing model A short block (new rings and valves and bearings adjusted to .0015 clearance),a model B motor complete from flywheel to fan,1928 chev. cyl head,1932B 3 speed transmission,and many other items...
gene french <gfrench1953@hotmail.com> 1-970-897-2415
174 adams ave, Nunn, Co.80648 USA - Sun Mar 14 12:19:57 2010Parts for SaleLarge drum Ruckstell and set of 30 X 3.5 demountables shown a few adds below have been sold. Thanks Stan and Mike!!
Lee Votroubek 319-551-1583
Cedar Rapids , Iowa USA - Sat Mar 13 20:27:46 2010Services Wanted:Is anyone traveling from the Tyler, TX area to Chickasha that could carry a pickup seat to Chickasha for me? The seat is from a '46 Ford pickup and is in two pieces (bottom and back). Thanks,
Mike Walker <waterwalk99@hotmail.com> 479-790-4229
Fayetteville, AR USA - Sat Mar 13 17:16:10 2010Parts Wanted1911 Model T Engine Wanted!! I'm restoring a 1911 and need an 1911 engine. A bare block or a working engine is OK. Ken
765 643-1122
Kenneth <brandenstanley@yahoo.com> 765 643-1122
Anderson, IN USA - Sat Mar 13 16:55:45 2010Parts WantedJUNK COILS WANTED!! Got any T coils that have totally worthless boxes on them. This is your chance to unload all of them for some $$. Bring them to Chicasha and I will take all of them so long as the windings are salvageable. Also looking for pinion spools both open and closed. Contact me ahead of time if you want and I will arrange to pick them up at Chicasha. At the swap meet my cell is 630-602-9179 but it doesn't work at my shop here in St. Charles so call Fun Projects number or use email if contacting me before Chicasha. John F. Regan <piewagon@funprojects.com> 630-584-1471
4N556 Knollcreek Drive, St. Charles, IL 60175 - Sat Mar 13 14:01:36 2010Parts for SaleI realized I hadn't priced the 13-16 Touring top sockets. The price is $350. You can also contact me on my cell phone anytime in the next few days on my cell phone 319-551-1583. I'm heading for Chickasha early Monday morning so I can only be reached on my cell phone. Thanks, Lee!!
Lee Votroubek 319-551-1583
Cedar Rapids, Iowa USA - Sat Mar 13 11:57:22 2010Parts for SaleBound for Chickasha. A friend of mine has decided to remove his complete set of 30 X 3.5 Demountable clinchers to replace with wire wheels. He's been driving on the tires and they are useable as is. Will also have an extra tire of the same type (Allstate I think) to go along with the set. These can be put right on and driven. $400 or best offer delivered to Chickasha. They'll be at space #SO-14 in south building. Will reserve for prior sale if you let me know.
Lee Votroubek 319-848-4634
Cedar Rapids, Iowa USA - Sat Mar 13 11:47:12 2010Parts for SaleNice set of 13-16 Touring top sockets complete. I'll have these at space #SO-14 in the south building at Chickasha. Call me if you want more information.
Lee Votroubek 319-848-4634
Cedar Rapids, Iowa USA - Sat Mar 13 11:34:11 2010Car Wanted:Looking for unrestored T coupe or Centerdoor in unrestored, but restorable condition. Prefer barn fresh example.Send price and pics.Thank you.
Anthony Tyree <piedmontauctco@aol.com>
Amherst, VA USA - Sat Mar 13 11:33:11 2010Parts for SaleLoading for Chickasha today. Will have: Large drum Ruckstell with wood wheel hubs/drums. Nice backing plates and U-joint. Has linkage. Only part missing is the shift lever. Blasted/primed. Turns freely without slack. $800/or best offer. Will have at space SO-14 in south building.
Lee Votroubek 319-848-4634
Cedar Rapids, Iowa USA - Sat Mar 13 11:29:47 2010Parts for SaleSORRY: Ad should have been PARTS For Sale. Here are some more things going on Trailer for Chickasha. Warford trans in parts, Gaint Jumbo trans in parts, Moore Trans in parts
(DS, cut off drive tube, shifter and linkage is there) Spaces FH13/14
Dan Hatch
USA - Sat Mar 13 10:13:32 2010Parts WantedMore stuff going on trailer for Chickasha, 26/27 bumber arms, early 26 fan, early 1919 dash,early 1919 cutout,small drum wire wheel hubs, FORD dealer key board, TT rim jack, 26/27 hood. spaces FH13/14
Dan Hatch <danielh462@NOSPAMcenturytel.net>
USA - Sat Mar 13 05:54:16 2010Cancel Prev Ad:Please cancle my add for a Hassler spring.
Thanks, Steve.
Steve <mcclellands@bellsouth.net>
TN USA - Fri Mar 12 19:16:36 2010Car for Sale:1925 Coupe, Ruckstell, Rocky Mt. brakes, new radiator, floating rear hubs, Anderson timer, new exhaust manifold, Fun Projects voltage regulator, recent rebuild of magneto, new tires, tubes, flaps in 2006, excellent interior, great car for touring. Email for pictures. $9,995
Roy Mathis <shelbydeanjean1@netzerodotnet> 479-474-7755
616 Bronzewood Lane, Van Buren, AR USA - Fri Mar 12 17:51:50 2010Parts for SaleLoading trailer for Chickasha. DB axle with spindles, late 12/13 rear end with 2pc DS, RAJO offset spindles, NOS TT rear axle bearing sleeves, NOS TT rear brake parts, NOS 23-25 RIGHT Rear fenders(will trade for NOS lefts) 26/27 fenders and other things.Inserts for STEVENS axle tool Spaces FH13/14
Dan Hatch <danielh462@nospamcenturytel.net>
USA - Fri Mar 12 15:58:08 2010Parts for SaleTT Dump bed shown on my website under projects. $1k. Works great. Project has taken a turn in a different direction. Tim 774-213-1790
MA USA - Fri Mar 12 12:58:32 2010Car for Sale:26 TT truck project on car frame and running gear engine and trans are apart look good 2,500
ed bucholz <vick55@sbcglobal.net> 219 863 8739
3325 w 932 n, lake village, in 46349 - Fri Mar 12 12:52:47 2010Cancel Prev Ad:I found a horn/light switch. Thanks for all the offers
Vernon G Enis <vgenis@verizon.net>
USA - Fri Mar 12 10:00:27 2010Parts for Sale1911 Oil Pan Inspection Plate Reinforcer. Very good conditon with no rust and good threads. Please visit http://modeltauction.com/ProBid/ for picture and more information. Dave Huson <modelt1912@msn.com> 303-774-9246
2116 Charro Ave, Longmont, Co USA - Thu Mar 11 23:28:32 2010Parts WantedWanted: Front seat hinges that mount to the floor of a 1926 Model T Tudor. Also looking for the "Y" spare tire mount for a 21x4.50 wheel and tire. Could also use a good stock steering wheel for the same 1926 Tudor.
Chris Fisher <cffisher@columbus.rr.com> 614-801-1901
3559 Natalie Drive, Grove City, Ohio USA - Thu Mar 11 16:02:41 2010Parts for SaleHELP;I need to cut down on my inventory of transmission drums. I cam home yesterday and found three boxes of T Parts at the back door of my shop. One box included more drums. I am running out of room to store transmission drums. For pictures and more information please visit http://modeltauction.com/ProBid/ Dave Huson <Modelt1912@msn.com> --303-774-9246
2116 Charro Ave, Longmont, Co USA - Thu Mar 11 10:46:57 2010Parts WantedI am looking for a good low cylinder head.If you have one for sale, or a lead please contact me . I could pick it up in Chickasha if you will be attending.It must be good and no cracks. I also need a 15" steering wheel , prefer a brass spider for a 1912. Thanks!
Dave Baker <cndbaker@frontiernet.net>
Kenyon, MN USA - Thu Mar 11 09:48:35 2010Parts WantedLooking for the rare and elusive drivers side rear fender for a 26/27 roadster/coupe. Also need running boards and splash aprons for same. Please send photos if you have some for sale. Tim 774-213-1790
MA USA - Thu Mar 11 08:16:59 2010Services Offered:Model A crank conversions. Have one partially done here for sale, can do another one if you don't like the color. www.ModelTengine.com 774-213-1790
MA USA - Thu Mar 11 08:10:05 2010Parts for SaleFree Shipping on Model T Engines - Professional rebuilt engines including; new poured Babbitt (mains, rods and ball cap), crank ground and polished, line bored to match crank, cylinders bored to .0x0" over, new aluminum pistons, new rings, new piston wrist pins and bushings, cam polished, new cam bearings, magneto magnets recharged (13 VAC at idle, 30 VAC at speed and starts on magneto), new Kevlar transmission linings, new transmission bushings, new Jack Rabbit Clutch, rebuilt carburetor, valve/lifter guides installed if needed, new valve seats if needed, valves lapped, starter/generator rebuilt if needed, generator adjusted for output, exhaust manifold straightened if warped and all new gaskets and paint. All engines are 'run in', in a fully instrumented test stand and are monitored for all critical aspects of operation, come see one run today. Please visit our web site at: www.texomats.com Contact us to set up a demonstration. 903-819-1452 Full machine shop, vatting, magnafluxing, all Babbitt work, main line boring, rod line boring, cylinder boring, cylinder sleeves, new valve seats, new valve/lifter guides, decking, welding, brazing, cold stitching, all rebuild services available. FREE SHIPPING, save a $1000.00, we will once again be attending Chickasaw Swap Meet in March, we can pick up your engine at the meet, at no charge.
Chris Dailledouze <chris@texomats.com> 903-819-1452
Sherman, TX USA - Wed Mar 10 21:22:33 2010Parts for SaleAfter a 4-year quiet development plus being driven and proven for a year in several vehicles, development is over and production is well under way. The All new All Aluminum RAJO "B" head is on the market. See it at RAJOHEAD.com or in Oklahoma in the north building spaces NF 05 and 06 Dave Szumowski <Szumowskimachine@yahoo.com>
Chicago, il USA - Wed Mar 10 19:38:19 2010Parts WantedI am looking for a Moore Shifter column in working order for my Moore Auxiliary Transmission or one that is similar in design that will work with the Moore unit. Thanks.
Jay-In Northern California <fordmodeltguy@gmail.com> nine one six 366-0535
Sacramento, ca USA - Wed Mar 10 12:02:30 2010Parts WantedWANTED - Model T accessory front bumper, round tubular brass, steel brackets attached to frame and were spring loaded close to frame. Gary Hylton, phone 913-362-7169 or e-mail at ghylton@kc.rr.com
Gary K. Hylton <ghylton@kc.rr.com> 913-219-7891
4003 West 72 Terrace, Prairie Village, KS 66208 - Wed Mar 10 11:48:50 2010Parts WantedWanted- a combination horn/light switch for Model T
Vernon G Enis <vgenis@verizon.net> 509-671-1382
PO Box 1812, Newport , Wa USA - Wed Mar 10 10:05:38 2010Correction to '14 Basket case, should have read TRUCK FRAME and must be later than '14
Sorry for the wrong info. My mistake
Bill Dugger <bmd1934mt@aol.com> 530 243-2591
Redding, Ca USA - Tue Mar 9 22:19:09 2010Parts WantedWanted: bucket seats for a 1912 speedster project. Side sides preferred. Looking for a unique pair. Thanks!
Mark <mark.arnold@gmail.com> (650) 740-5580
Los Altos , CA USA - Tue Mar 9 18:55:02 2010Parts Wanted'26-'27 Running Board Support Brackets - Need 2 pair. These are a little over 62" long with 2 holes (3/8") about an inch apart toward the ends. The earlier pressed steel brackets are not nearly 60" with only one 3/8" hole at the ends. Also need 1 nice '26-'27 steering column. I'll be at Chickasha from next Wednesday till early Saturday. Just remove (nospam) from my email address. Thanks MTFCA !!
george house <gwhouse2@peoplepc.(nospam)com> (512) 376-4180
142 elm creek rd., lockhart 78644, TX USA - Tue Mar 9 17:39:00 2010Parts WantedI need one good coil spring for a front hassler shock. remove no spam when replying....
Thanks, Steve.
Steve <mcclellands@bellsouth.net. no spam> 423-284-9750
Georgetown, TN USA - Tue Mar 9 15:31:21 2010Car for Sale:For Sale: "14 hopefully, Basket case! Comes withe radiator (bad I think), engine, transmission,Warford and needs complete restore. Would make a good porject. Also has front and rear axle, engine will turn over and has starter and generator. steering column carb and timer. Asking $1,000 or OBO CASH. Was going to restore but opted for a '17 Depot Hack.Will help load.
Bill Dugger <bmd1934mt@aol.com> 530 243-2591
Redding, Ca USA - Tue Mar 9 15:13:54 2010Trade:I will trade two modern repro closed car door handles for two originals,these are the same as shown in Snyders catalog on page T-62, part A-702350p,the black paint is a little skinned but can be repainted,they don't look right on my Fordor.Pictures on request. free shipping in the US
Rick Goelz <rggoelz@tds.net> 865-966-1410
Knoxville, TN 37934 - Tue Mar 9 08:52:18 2010Ad Correction:I forgot to mention in the previous ad to remove no spam when replying. Thanks
Larry Smith
USA - Tue Mar 9 00:26:01 2010Information:I need plans or original part numbers for a 1913 Runabout top, especially the rear curtain. Bruces book only goes back to 1915.
Larry Smith <origsmith@sbcglobal.netnospam>
Lomita, California USA - Tue Mar 9 00:23:30 2010Parts WantedI need the shift lever and attachment hardware that goes on top of a Chicago Mark E transmission. All I've got is a hole. Someday I'd like to get this tranny in one of my cars.
Noel Chicoine <noelchico@pie.midco.net> 605-224-9294
1005 East Erskine Street, Pierre, , SD USA 57501 - Mon Mar 8 21:12:19 2010Parts for SaleModel T 1926/7 coupe, split windshield frame and glass intact. Found in our boathouse. We would like to sell it and wonder what's it worth? If interested, please make an offer.
Mark Hulst <madkat729@hotmail.com> 231-852-0396
5663 W. Pleasant Hill Rd., Freesoil, MI USA - Mon Mar 8 17:45:12 2010Car for Sale:1911 FORD MODEL T TOURING BRASS HORSELESS CARRIAGE with unique wooden body; Frame-off - ground up restoration; appraisal as excellent in all categories. A show car with a rare body style; registered and ready to drive. Contact for more info. Serious inquireies only! Priced below appraisal.
Canadian serial #. Limited production run. Asking $19,900. Brent Hoedel <bhoedel@shaw.ca> 403.669.7900
Cochrane, AB CANADA - Mon Mar 8 16:34:53 2010Parts Wantedwind wing brackets for my 1925 TT C Cab
Steve Smith <modelasteve@msn.com> 541 746 2954
4061 Harmon Ln, Springfield, OR USA - Mon Mar 8 14:08:20 2010Services Offered:Returning from northern ca.to southern ca. on the 13th of march with empty trailer. Can haul parts or model T for fuel.
Larry Ciuffo <lciuffo1@sbcglobal.net> 760-233-1263
2215 N. Nutmeg St, Escondido, ca USA - Mon Mar 8 09:59:25 2010Parts WantedDesire to purchase a '25 door strap clamp or will pay for a rough mold of one for use as a guide for fabrication of the part. Molding info and materiels upon request.
J Iversen <jivrsn@gmail.com>
Blue Lake, CA USA - Sun Mar 7 23:08:26 2010Parts Wantedpistons wanted cast iron .030 - .031 over only . sorry for duplicate i forgot e-mail
martin <walkersguns@yahoo.com >
USA - Sun Mar 7 22:32:14 2010Parts for SaleRajo BBR Overhead with rocker arms and valve cover. In very very good condition. Believed to be NOS. JOHN ROGNE 918-633-4800 Claremore, Ok.
John Rogne <adious@aol.com> 918-633-4800
734 Winter Lane, Claremore, Ok USA - Sun Mar 7 14:55:07 2010Car for Sale: 1926 Model T Touring 11,600.00 OBO Price reduced. The car has been recently painted with a nickel green body with black fenders and running boards. The extra stanchions on the body are for an all weather kit that was installed in the past. New interior including all upholstery and 12 piece panel kit. New battery, water pump, and belt. Professionally rebuilt carb. The car is a nice driver starts and drives excellent. It will need a new top in the future as the previous owner did several repairs to the top (top does not leak). The car will need a new front rt inner tube. There is a small oil leak at the tranny tail housing. A couple of flaws in the paint that I can provide pictures of. Email for picturs and more info.
James Edwards 303-522-2813
James Edwards <jamesedwrds101@msn.com> 303-522-2813
2184 Pleasant Hill Circle, Parker, CO USA - Sun Mar 7 13:08:14 2010Parts WantedLooking for original door upholstery (trim)for 1909/10 Tourer(rear)doors in any condition - (buy or swap-have some early parts spare)
thanks Keith Carter
Keith Carter <splenda1909@bigpond.com> 0427871168
2/70 Cliff road, Wollongong, NSW Australia - Sun Mar 7 06:33:21 2010Car for Sale:1914 Ford Model T Roadster. Engine #375378 casting date on the block is 6-28-13. Runs good, needs top bows, upholstery and paint. Very complete and correct. There is a complete top that comes with the car. Email me for pictures(remove nospam from the email address). $10,500.00.
Kim Dobbins <kdmks(nospam)@earthlink.net> 310-539-9328
Harbor City, CA USA - Sat Mar 6 18:45:12 2010Car for Sale:For Sale, A very nice 1919 Depot Hack. Fully restored. Ruckstell, Warford, outside brakes. New spoke wheels. Stock rebuilt engine with distributor and alt. Lots of little extras. Runs well and looks good. $16,500. Please call or e-mail for photos or information. Thanks, Ben
Ben Serar <serarphoto@earthlink.net> 626-862-7642
2015 Exmoor Pl., Glendora, CA USA - Sat Mar 6 14:42:03 2010Parts WantedLooking for a 1925 Roadster body.
Jerry Villa <thevillastudio@gmail.com> 702-243-9133
10516 Courtney Cove Ave, Las Vegas, NV USA - Sat Mar 6 11:33:58 2010Parts for SaleChickasha north bldg.spaces nf 05-06.Rebuilt field coils by total recoil sold on exchange basis.Hand crank coil tester by kr wilson totally rebuilt.$825.Pair 26-27 front fenders excellent cond $800.Pair 26-27 rear fenders for roadster,coupe or pickup$800. excellent cond.There is no rust,rips or ripples on these fenders.4 wire wheel front hubs $75. each.Complete Stewart speedometer setup for 15-18 ford.Speedometer parts.Wally or Peter Call cell #708 539 4550.Wally's #773 586 4485.Buy this stuff we need the money!
peter hoeksema <peterjhoeksema@yahoo.com> 708 539 4550
30 richmond av, lagrange park, il USA - Fri Mar 5 16:05:32 2010Parts WantedI'm looking for an original oil can older for under the hood. If you have an extra please you can part with let me know. Thanks!!
Gary London <modeltbarn@gmail.com>
USA - Fri Mar 5 12:41:37 2010Parts WantedParts Wanted- good Oil fonts for VICTOR #2 side or tail lamps,also 1 font for JNO BROWN #110 side or tail lamp.Thanks for any help.
Reuben Lefebre <benlefebre@juno.com> 585-261-2661
4700 Split Log Ln W., Estero, FL 33928 - Fri Mar 5 10:07:06 2010Car Wanted:Would like to find a 1913 Touring that is in good condition cosmetically with nicely done, horsehair stuffed leather upholstery. I can do mechanical work if necessary. Fully restored car in number one condition also considered. Any suggestions or leads appreciated.
Scott Dwyer <dwyers@rpi.edu> 518-276-8414
1577 Tibbits Ave, Troy, NY 12180 - Fri Mar 5 09:13:02 2010Information:John Regan (Fun-Projects) contact me, as I tried to order an order this eve, and of course the computer does not read what I wrote for shipment, email me please
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Thu Mar 4 23:24:34 2010Parts for SaleVery Nice 1912 Block, serial # 149XXX 1-1/2" crack in water jacket has been professionally repaired using the cold stitching method. Also very nice 1911-12 Low Head, they both have NO pitting. $2400.00 for pair or will split up. Free Delivery to Chickasha. Don Lang <Sales@modeltford.com> 800-872-7871
202 School St., Winchendon, Ma USA - Thu Mar 4 21:11:39 2010Services Offered:Traveling to northern Calif. Returning with empty trailer weekend of March 14th. Will haul your car or parts for fuel to San Diego or southern Ca.
Larry Ciuffo <lciuffo1@sbcglobal.net> 760-233-1263
2215 N. Nutmeg St, Escondido, ca USA - Thu Mar 4 18:16:56 2010Parts for SaleTwo sets of cotton bands (NOS). One set is Sears and the other Wards, both are for 09-25. $25 each set with rivets.
The TT boot scraper running boards are gone.
Gary Tillstrom <gtillstrom@aol.com>
Atoka, TN USA - Thu Mar 4 15:27:22 2010Parts for SaleComplete 1914 chassis with running motor and brass radiator. All correct Parts. Many of the parts are restored, Taper Leaf Springs restored, Correct Steering Column. Lettered Pedals, Aluminum Hogs head. Correct Gas Tank with brackets. 30x3 1/2" round felloe wheels in back and 30 x 3" round felloe wheels in front with correct hubs. Tires will be supplied. Correct Front axle with drag link and Tire Rod. Correct Hood Former. Can deliver to Chickasha. Asking $4750.
Carl Leonard <Rocktoy4x4@aol.com> 970-231-9312
1705 Morning Drive, Loveland, Co USA - Thu Mar 4 14:36:32 2010Parts for Sale26/27 Coupe/Roadster rear fenders. Very nice originals. no cracks, no breaks, no welds, couple minor dents. Both have the bracket. Inquire for pics. $650.00....prefer they be picked up.
Dan <drr@woh.rr.com>
OH 45390 - Wed Mar 3 00:54:11 2010Parts for SaleTwo complete 1919-24 chassis with front & rear axles, radius rods, drive shaft, universal joint, engine block, crankcase, hogs head, Fourth main, all four hubs, brake drum, four demountable feloes & rims, front & rear springs, coil box, and handbrake. Last call for FREE delivery to Chickasha Swap Meet. Could supply later (1926-27) rear axle if required. Other parts available, contact me with your needs. $500 as described.
Tony Bowker <tonybowker@aol.com> 760 789 3954
15838 Oak valley Rd, Ramona, CA 92065 - Tue Mar 2 23:31:57 2010Parts for SaleThe good pr of wire wheel 26-7 hubs and the 2 rear hubs have been sold thanks
John Danuser <danuser88@socket.net> 573-642-2473
4898 State RdHH, Fulton, Mo USA 65251-3730 - Tue Mar 2 22:00:24 2010Services Offered:Empty open car trailer available to haul car or parts from New England to Chickasha Ok or anywhere on the route to the meet. Please call Vinnie @ 978-758-0834
Don Lang <Slang87@msn.com> 978-297-1919
202 School St, Winchendon, Ma USA - Tue Mar 2 21:00:40 2010Parts for SaleMr Mosher I hope I'm not the one you just blasted in Missouri, as as I recall you purchased a set of Spranger wire wheels, a NOS extention handle for the emergency brake handle from me and have now reproed several off of it at the Richmond Ind meet, either way they are in my trailer headed for CHICKSHA Ok
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Tue Mar 2 18:43:46 2010Parts for SaleAccessory Model T aftermarket carb, click on my name for a picture, make unknown and is not marked, age cracked but you may be putting it in a display anyway, $30. Remember to remove (NOSPAM) from email address. Layden Butler <laydenandJean(NOSPAM)@comcast.net>
107 Saint Jean Ct., Danville, CA 94526 - Tue Mar 2 16:11:50 2010Cancel Prev Ad:FOUND! i've had two offers of a fender brace so THANKS MTFCA and david s. and john h. as for the offers from the U.K. and missouri, you can shove the brace where the sun don't shine. especially missouri....i've had two deals with that clown in the past , and never again.... i don't know how he keeps going but it must be hot air and B.S.
tim morsher
norwalk, ohio USA - Tue Mar 2 13:26:38 2010Parts for SaleOriginal fender straps, various kinds from a blacksmith made 1 pc, to factory made pcs, holds up front fenders from sagging 85.00 ea, T generators w/governor built in 150.00, Muncie TT transmission rebuilt by former owner, has the shifter dead center 550.00, 25 TT commercial used front fenders 500.00/pr, NOS 25 commercial front fenders 1000.00/pr all plus UPS or truck freight or prepay and I'll deliver to Chickasha in 2 weeks
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Tue Mar 2 12:15:34 2010Parts for SaleFree Shipping on Model T Engines - Professional rebuilt engines including; new poured Babbitt (mains, rods and ball cap), crank ground and polished, line bored to match crank, cylinders bored to .0x0" over, new aluminum pistons, new rings, new piston wrist pins and bushings, cam polished, new cam bearings, magneto magnets recharged (13 VAC at idle, 30 VAC at speed and starts on magneto), new Kevlar transmission linings, new transmission bushings, new Jack Rabbit Clutch, rebuilt carburetor, valve/lifter guides installed if needed, new valve seats if needed, valves lapped, starter/generator rebuilt if needed, generator adjusted for output, exhaust manifold straightened if warped and all new gaskets and paint. All engines are 'run in', in a fully instrumented test stand and are monitored for all critical aspects of operation, come see one run today. Please visit our web site at: www.texomats.com Contact us to set up a demonstration. 903-819-1452 Full machine shop, vatting, magnafluxing, all Babbitt work, main line boring, rod line boring, cylinder boring, cylinder sleeves, new valve seats, new valve/lifter guides, decking, welding, brazing, cold stitching, all rebuild services available. FREE SHIPPING, save a $1000.00, we will once again be attending Chickasaw Swap Meet in March, we can pick up or deliver your engine at the meet, at no charge.
Chris Dailledouze <chris@texomats.com> 903-819-1452
Sherman (North of Dallas), TX USA - Tue Mar 2 09:19:04 2010Parts for SaleI have two pairs of model t rims for sale,one metal pair and one wood pair,100.00 ea pair.
Jim <jamesnbeckyb@sbcglobal.net>
Indianapolis, In USA - Mon Mar 1 21:01:37 2010Parts WantedNeed a Muncie aux trany for a 27 TT. Remove nospam from email
Dan Protexter <protexter@q.comnospam> 712-259-1808
USA - Mon Mar 1 20:55:58 2010Parts WantedNeed a governor for a T engine when you use it as a stationary engine. Remove nospam from email
Dan Protexter <protexter@q.comnospam> 712-259-1808
, - Mon Mar 1 20:48:04 2010Cancel Prev Ad:FOUND rad. necks !!! isn't this site great !!! LETS TRY AGAIN. i need an original vintage strap that kept the front fenders of lizzy from sagging. looking for an original that has been taken off to restore your car correctly. i would prefer one with some good age showing, but nothings really rusty. please remove NOSPAM from email address if you have one for sale. THANKS MTFCA !!
tim morsher <tmorsherNOSPAM@neo.rr.com>
norwalk, ohio USA - Mon Mar 1 20:25:37 2010Parts for SaleOriginal Model T script oil can, pictures on request, $40 domestic postage $7. Remember to remove (NOSPAM) from email address.
Layden Butler <LaydenandJean(NOSPAM)@comcast.net>
107 Saint Jean Ct., Danville, CA 94526 - Mon Mar 1 15:36:04 2010Parts WantedL@@KING FOR; several old radiator necks. (2-6) would prefer to buy several from one source. they do not need to be usable for a restoration or repair, and any year would be fine, too. whatcha' got?? please remove NOSPAM from email address to contact ... THANKS MTFCA !!
tim morsher <tmorsherNOSPAM@neo.rr.com>
norwalk, oh USA - Mon Mar 1 13:01:39 2010Services Offered:Free delivery on engine rebuilds. We're starting to plan for Hershey in the fall. Get your engine in now and we'll deliver it to you in OCT for free. Tim <mtfca@modeltengine.com>
USA - Mon Mar 1 12:14:11 2010Parts WantedWanted: Wind wing brackets for my 1925 C cab TT.
Steve Smith <modelasteve@msn.com> 541 746 2954
4061 Harmon Lane, Springfield, OR 97478 - Sun Feb 28 18:31:36 2010Car for Sale:1926 Model T Touring 11,800.00 OBO Price reduced. The car has been recently painted with a nickel green body with black fenders and running boards. The extra stanchions on the body are for an all weather kit that was installed in the past. New interior including all upholstery and 12 piece panel kit. New battery, water pump, and belt. Professionally rebuilt carb. The car is a nice driver starts and drives excellent. It will need a new top in the future as the previous owner did several repairs to the top (top does not leak). The car will need a new front rt inner tube. There is a small oil leak at the tranny tail housing. A couple of flaws in the paint that I can provide pictures of. Email for picturs and more info.
James Edwards <jamesedwrds101@msn.com> 303-522-2813
2184 Pleasant Hill Circle, Parker, CO USA - Sun Feb 28 17:27:09 2010Parts WantedNeed one good, solid 26/27 wire wheel. To email remove (nospam)from address.
bob wood < rnrwood@(nospam)comcast.net>
el sobrante, ca USA - Sun Feb 28 15:34:25 2010Parts for SaleNice set of original E&J Brass sidelights . These are polished up and ready to be mounted . Complete with burners . Not show
but very presentable . Asking $350 plus shipping . Domestic sales only .
Dan Smithwick <daniel.smithwick@charter.net>
Eastford, CT USA - Sun Feb 28 13:43:29 2010Parts WantedModel T Ignition Coils. I am looking to purchase large quantities of used Model T ignition coils. Preferably 25 or coils at a time. I have been buying used coils for years and have I have several ways to deal; will buy outright or trade for some rebuilt units you may need. Please give me a call, I will explain all the options and see if we can work something out that is mutually beneficial. Ron Patterson 859-881-1677
Ron Patterson 859-881-1677
Nicholasville, KY USA - Sun Feb 28 13:21:27 2010Trade:Looking for cast iron muffler with tail pipe 1911-15 will work fine, I have a perfect 1920's muffler for trade...Or would buy yours out right, mine has beed blasted new shells painted with 500 dgree. Hi-Temp Ceramic Black looks like it's been dipped into black glass ! ( Slick ) (remove MTFCA from mail)
Steve <mcclellands@bellsouth.net MTFCA> 423-284-9750
TN USA - Sun Feb 28 11:08:04 2010Parts for SaleI have an aluminum case Warford for Sale. I intended to use it in a car I was going to build however plans have changed so now I need to sell it. I have had it completely torn down and replaced 2 of the bearings that were not quite right. All back together now and works great and ready to go in your car. Will let it go for $550 including shipping to continental US. Please replace the # in the email address with an @
Tom Stanzione <tastanzione#tds.net>
1190 Oak Haven Rd, Knoxville, TN 37932 - Sat Feb 27 21:39:58 2010Car for Sale:1926 T Touring car. Older Phoenix Brown paint but in very good shape. Very good upholstery, top is OK but needs replacing soon. Drive train has been completely rebuilt. Engine has all new babbitt, aluminum pistons, adjustable lifters and new valves, Transmission has all new bushings, jack rabbit clutch and kevlar bands. Mag is not working properly though. Seems the mag coil which was thought to be good may not be. 2 year old new brass works radiator. U joint, drive shaft and entire rear end has been apart, new thrust washers, adjustable pinion bearing, all other original Hyatt bearings checked and in spec, neoprene axle seals and new style outer bearing cap/seal all restored back to original specs. Car currently has an Atwater Kent Distributor on it and runs great. Send me an e mail if interested. Pictures Available. Asking $14,000 or best offer, have way more than that invested. Please replace the # in my email with an @. Thanks for taking a look here
Tom Stanzione <tastanzione#tds.net>
1190 Oak Haven Rd, Knoxville, TN 37932 - Sat Feb 27 21:35:58 2010Car for Sale:1910 mother-in-law roadster. Just about all of it is 1910 except for the engine block which is a unstamped 1916 with a long nose pan and the rear end. Car runs good and drives nice. Fenders and splash aprons are new Rootliebs. Tires are newer firestones. Only selling because I'm out of space. $16000 obo. Remove nospam from e-mail.
Dan Protexter <Protexter@Q.comnospam> 712-259-1808
2911 S. Lyons, Sioux City, Iowa USA - Sat Feb 27 20:58:13 2010Parts for Saleundrilled cast aluminum dual carb intake manifold for ROOF or FRONTY w/2 intake ports 150.00, 26-7 touring topbows w/ original wood 700.00, 25 commercial TT front fenders NOS 1000.00/pr, used 25 fenders 500.00/pr, real nice right front A fender non-wheel-welled 600.00, some A parts includingsome right hand drive pcs, all will be in CHICKASHA west of the South building, last overhead door to the south
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Sat Feb 27 16:01:41 2010Parts for Sale1922 touring body and fenders. The body is all taken apart and has some new patch panals tacked in and also has a whole new back panel. There are also a few new parts that are still in the package. The doors are good and have wood in them along with the openers. The windshield and side lamps and tail lamp are all in good condition. Top bows are also included, they would need new wood but the metal is good. The fenders are in really good shape and are not torn. The left front one has the bottom lip starting to come off but it is still attached and could be fixed easily. Would like to sell as a whole but will seperate the fenders. All together, $1600 or $800 for fenders only. Can deliver to Chickasha. Remove nospam from e-mail.
Dan Protexter <Protexter@Q.comnospam> 712-259-1808
2911 S. Lyons, Sioux City, Iowa USA - Sat Feb 27 14:17:08 2010Parts WantedCHICKASHA SWAPMEET OFFER...will consider trading my design linebore unit and 1 either model T or model A mainbearing mold for a model A chassis for a speedster project...chassis must have front and rear axels complete from drum to drum,steering assembly complete,engine and car transmission complete,4 servicable 21" wire wheels(no tires prefered)frame rails should be un-cut ,and unbroken,and reasonably straight...i am offering approx. $1000 value and would expect equal value in trade...i will have my tools on display at space FQ11...i would like to pickup chassis at the meet or on way back to Colorado on Sat.,if intrested call(evenings after 6:30 MST.) or e-mail and we will go over details before meet...My tools come with illustrated instructions as well as my telephone (your call) or e-mail support...with these tools you will me able to pour and linebore the mainbearings in either Model T or A Ford engines
gene french <gfrench1953@hotmail.com> 1-970-897-2415
174 adams ave, Nunn, co 80648 USA - Sat Feb 27 13:15:45 2010Parts for SaleModel A short block:I will be at CHICKASHA swapmeet,pickup this engine and save shipping cost...early Model A short block with .030 oversize pistons,new rings,re-ground valves ,main and rod bearings are good and were re-fit by lapping to .0015 clearance ...engine has 5 bearing camshaft and correct early oil pan...should make a good "driver" engine at a moderate cost...this engine may be picked up or i can place on pallet and dropoff at freight depot in Greeley or Fort Collins for $50 additional charge (buyer must arrange shipping) ...price of short block with oil pump and pan installed is $850
gene french <gfrench1953@hotmail.com> 1-970-897-2415
174 adams ave, Nunn, co 80648 USA - Sat Feb 27 12:49:08 2010Parts for SaleModel T mainbearing mold:I will be at CHICKASHA swap meet space FQ11,pickup your mold and save shipping...this mold will pour block and caps @1 1/8" diameter,with approx. .03" excess material per thrust surface for finish machining of mainbearing bearing diameter and proper positioning of thrust surfaces to achieve correct mag. coil /flywheel clearance...these sizes allow the use of standard or any reasonable undersize model T crankshafts...price of $100 includes postage in lower 48 states,written instructions and my telephone(your call) or e-mail support...i can ship outside this area including INTERNATIONAL shipping for actual postage charges
gene french <gfrench1953@hotmail.com> 1-970-897-2415
174 adams ave, Nunn, co 80648 USA - Sat Feb 27 12:46:52 2010Parts for SaleMainbearing Linebore Unit:this is a rigid 4 bearing frame that is designed to attach to the pan rails of BOTH Model T and A Ford engines,it provides a means of accurately boring the mainbearings to any desired diameter and cutting the thrust flanges and clearance radii...included are the linebore frame,boring bar and 1 boring bit each for Model T and A ,dial indicator toolsetting fixture to set cutting diameter of boring bit(1.050" thru 1.750" with bits provided) ,1 radius/facing bit and stopring to cut the thrust flanges ,false cam,locator brackets and adapter bushings,and an illustrated 4 page proceedure sheet and my telephone (your call) or e-mail support...this unit weighs approx. 50 lb. and can be shipped by U.S.P.S. anywhere in lower 48 states for around $50 ...other areas including INTERNATIONAL shipping to most countries is reasonably low as well(U.S.P.S. international rate) ...price is $850 +$35 crateing materials and actual U.S.P.S. shipping charge ...I will be at CHICKASHA swapmeet at space FQ11 ,save shipping and pickup your unit at meet...call or e-mail for info packet
gene french <gfrench1953@hotmail.com> 1-970-897-2415
174 adams ave, Nunn, co 80648 USA - Sat Feb 27 12:44:30 2010Parts for SaleHave you been wanting a Ruckstell but don't want to pay the big bucks from the vendors. Or maybe you have already rebuild the diffy in your T and have a new ring and pinion, sleeves and all that and hate to pay for all that again. Here is a deal. I have two Ruckstells and just don't have time to get them both done for Chickasha. I will sell you a kit just like the ones from Chaffins for about $700 less. You get all the parts to put one together--housing, gear set, bearing, shift lock, etc. for $1500. That includes a good or new set of the small planetary gears that are always worn out. Small or big drum, your choice. There is room enough in there that if you do need to buy a couple more parts you can do it and still come out ahead. I need some money to go to Chickasha on, give me a call, we'll talk.
Stan Howe <stanhowemt@aol.com> 406-949-3448
4433 Red Fox Dr., Helena, MT USA - Sat Feb 27 11:04:12 2010Parts WantedLooking for cast iron muffler with tail pipe 1911-15 will work fine, I have a perfect 1920's muffler for trade... beed blasted new shells painted with 500 dgree. Hi-Temp Ceramic Black looks like it's been dipped into black glass ! ( Slick )
Steve <mcclellands@bellsouth.net ...mtfca> 423-284-9750
TN USA - Sat Feb 27 01:05:43 2010Parts for Sale26 TOURING BODY LESS FRONT COWL WITH ALL FENDERS- APRONS AND RUNNING BOARDS $750 OBO ALSO SET OF FRONT AFTERMARKET SHOCKS SPRING LEVER TYPE $ 150 OBO E-MAIL FOR PICS
mark jojola <mjojola@dslextreme.com> 661-903-0898
16154 newmont ave , lancaster, ca USA - Fri Feb 26 22:43:33 2010Car for Sale:1926 Touring. This is a follow-up to my original ad. I forgot to include: I am asking $8,000.00 for my car. As mentioned it is a great car and i have had a lot fun with it. Call Carl at 623-465-4360.
Carl Roser <aztinlizzie1@hotmail.com> 623-465-4360
2105 E Gaffney Rd, New River , AZ 85087 - Fri Feb 26 16:46:57 2010Car for Sale:1926 Touring for sale. This car ready to go touring. It has wire wheels, distributor, water pump, good interior, good top, good looking. Call Carl at 623-465-4360.
Carl Roser <aztinlizzie1@hotmail.com> 623-465-4360
2105 E Gaffney Rd, New River, AZ 85087 - Fri Feb 26 16:43:37 2010Parts for SaleTo all of you good ford T Truck Collectors ,I have 2 26 TT trucks I want to sell or part out Both trucks are complete origanal and a little rough, have Ruckstells and gear boxes in rear of trans ,Have original factory flat beds and a spare cab all are closed cabs.Also have a complete side board set with most of hardware and 8 steel stakes . Both came off of A Ranch in So Dakota Asking $4500.00 For All Thanks
Don <djblain@msn.com> 503 585- 8078or 503- 871-8696 cell
7623 Jackson Hill Rd S.E., Salem, OR USA97306 - Thu Feb 25 23:54:01 2010Parts WantedLooking for adapters for Model T wood spoke hubs to Model A Wire Wheels. Need 2 for the rear axle. Thanks
H.Tomlinson <htomlinson@peoplepc.com>
244 Jefferson St., Orange, VA USA - Thu Feb 25 20:13:24 2010Parts for SaleModel T Parts
Nuts and bolts to complete engines. Buy one part or all.
Make Offer
(951) 544-9541
Jim McKenzie <crazychicken54@gmail.com> (951)544-9541
3975 Madison Ave., Riverside, Ca USA - Thu Feb 25 17:22:19 2010Car for Sale:$35,000.00 obo
1910 Model T Tourabout (very rare)100 yrs. old
95% complete-runs needs upolstery
Ruckstell rear-end, Hasler shocks fnt & rear
Call Jim-info & pictures
(951)544-9541
Jim McKenzie <crazychicken54@gmail.com> (951)544-9541
3975 Madison Ave., Riverside, Ca USA - Thu Feb 25 17:06:17 2010Parts for SaleTall-used Ford (Made in Canada) nickle shell, its straight, but missing some of the area that holds the webbing for the hood to lay on 200.00, Tall-steel Ford (Made in USA) rusty, needs bead blasting, heavy primer and paint riad. shell 200.00 plus UPS or prepay and I'll deliver to Chickasha
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Thu Feb 25 16:53:38 2010Car for Sale:1911 Model T Touring Car
$30,000.00 obo
Parade Ready-completely restored
Call for pictures.
Ask for Jim
(951)544-9541
Jim McKenzie <crazychicken54@gmail.com> (951)544-9541
3975 Madison Ave., Riverside, CA USA - Thu Feb 25 16:45:43 2010Parts for SaleSet of Brass E&J 1908 sidelamps . Very nice original set
ready to bolt on . Complete with burners . $475 plus shipping . Domestic sales only .
Dan Smithwick <daniel.smithwick@charter.net>
Eastford, CT USA - Wed Feb 24 17:39:25 2010Literature for SalePlans to rewood 1914-27 roadsters and tourings. Also have a new set of plans to rewood the early 1915 touring with all wood seat construction. I am working on a new set of plans for the 1913 touring. I hope to have them done sometime in May. I have found some original 1913 wood to complete this project. Please e-mail me if anyone has questions about your rewooding project. Please remove the t from my address to e-mail me. I will also be at the Chickasha swap meet March 18,19 in the south building space sc08 with my plans, Model T trouble shooting posters and T parts. I will have a new product, a magnetic Ford reflector for the back of any Ford car. I will also have the prototype of the magnetic reflectors for Chev's.
Leon Parker <tford1914@bellsouth.net> 270-217-7489
126 Chickasaw Bluff Rd., benton, ky USA - Wed Feb 24 13:58:32 2010Parts WantedWanted. Spare tire carrier for 1927 Roadster Pickup.
Bill Saitta <wsaitta@earthlink.net> 727-687-3673
6822 22nd ave no #197, st petersburg, fl USA - Wed Feb 24 13:16:48 2010Parts for SaleREar early tapered spring nice cleaned and primered $200.00 Have nice kerosene side lights and tail light complete 17-22 cleaned and painted $150.00 pair early 26 headlights nice $125.00 Thanks Can send pictures
Don <djblain@msn.com> 503 585- 8078or 503- 871-8696 cell
7623 Jackson Hill Rd S.E., Salem, OR USA97306 - Tue Feb 23 23:34:14 2010Car for Sale:1930 Model A Town Sedan for sale. Restored. Click my name for links to pictures and information. Selling to complete some T/brass era projects. Robert Daniello <rdaniello(remove)@gmail.com>
Northampton, MA USA - Mon Feb 22 23:39:58 2010Services Offered: - I hope to have an empty enclosed trailer following the Chickasha Swap Meet, March 18-20, 2010, returning to Southern California. Contact me if you will need a vehicle or parts transported.
Tony Bowker <tonybowker@aol.com> 760 789 3954
15838 Oak Valley Rd, Ramona, CA 92065 - Mon Feb 22 21:10:42 2010Parts for SaleI pair of mint Marigold Bud Vases, NH carburetor, New oil sight gauge, Nice 24 Colorado License Plate, Water Pump, Cylinder Blocks, Wire Wheel Rear Hubs, Transmission Drums, Model T Jack, Round Gas Tank, Many more parts to numerous to list: For pictures and information please visit http://modeltauction.com/ProBid/ Dave Huson <Modelt12@msn.com> 303-774-9246
2116 Charro Ave., Longmont, Co 80504 USA - Mon Feb 22 19:38:21 2010Car for Sale:For Sale: a 1924 Model T Roadster, completely restored from the original car. In great running condition. Has been driven across the country from West Virginia to the Grand Canyon. No rust, even before restored. New wheels, tires, top and side curtain. The owner is deceased.
Price is $18,000.
Patricia Johnson <palma924@yahoo.com> 304-628-3883
RR 1, Box 64, Cairo, WV USA - Mon Feb 22 17:25:35 2010Car for Sale:Complete 1919-24 chassis with front & rear axles, engine block, all four hubs, four rims, front & rear springs and handbrake. Possible free delivery to Chickasha. Could supply later (1926-27) rear axle if required. Other parts available, contact me with your needs. $500 as described.
Tony Bowker <tonybowker@aol.com> 760 789 3954
15838 Oak Valley Rd, Ramona, CA USA - Mon Feb 22 00:04:46 2010Parts WantedStevens Tools for model T Fords.
Steve Rini <srini@socal.rr,com> 714-842-4147
6171 Fenley Drive, Huntington Beach, CA USA - Sun Feb 21 22:09:56 2010Parts WantedSeeing rocker arms for 16 valve Roof or Laurel cylinder head.
Steve Rini <srini@socal.rr.com> 714-842-4147
6171 Fenley Drive, Huntington Beach, CA USA - Sun Feb 21 22:08:07 2010Parts WantedGood condition 1914 Ohio License Plate
Jim <jshaffer@sssnet..com>
USA - Sun Feb 21 19:59:41 2010Information:i have looking for a up-grade for my speedster
project.
i think i have found the perfect set-up.
Neal Jern, out of Redding Calif. manufactures
the "THUNDERBOLT"a chevy head with his own adapter plate set-up which seems to be the ticket.
uses either a single Stromberg carberator, or Neal makes a dual set-up, with Stromberg 81's
finished price is quite reasonable.
Neals phone .........5302440277
Rick Patton <rcpatton@webtv.net> 4846953933
5622 Emmaus Road, Emmaus, Pa. USA - Sat Feb 20 21:42:34 2010Parts WantedNice Original or restored black and brass headlights and sidelights correct for a 1913 Model T. All brands considered but prefer J Brown. I will pay a good price for nice lamps
David Pava <David@Pava.com> 925-932-2923
1104 Chiltern Drive, Walnut Creek, CA USA - Sat Feb 20 10:31:44 2010Parts Wantedwanted: 15 inch steering wheel complete if possible for a 1912, I have a smaller wood wheel with a nice brass center spider to trade if needed
Dave Baker <cndbaker@frontiernet.net> 507-789-5567
47511 County 12 Blvd, Kenyon, MN USA - Fri Feb 19 15:15:30 2010Parts WantedI am still looking for a complete set of Top Irons that will work with a 1915-1916 Touring. Thanks.
Tom <bsascouts@kinex.net> 1 434 392 3555
Rice, VA USA - Fri Feb 19 13:23:36 2010Parts for Sale1928-9 accessory wheels for AA AMERICAN 8 spoke cast centers use 600 x 20 (30 x 5's) in front and dual rears, they have the 28 flat caps on the centers, some of the bolts need rebuilt $ 2500.00 for the set, if not presold they will be at Chickasha swap meet, in the AA book of authorized accessories is the only photo I've ever seen them published really NEAT, they won't go under fenders in the rear
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Fri Feb 19 12:50:39 2010Parts for Sale26-7 sq cab TT . with all trim, and doors 2000.00, also have frames, front and rear ends, TT ruxstell's, rocky mountain 6 speed ahead of one TT rear end, Jumbo Giant auxillary transmissions, 6 spd Muncie gears junk, case excellent, What do you need?
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Fri Feb 19 10:20:36 2010Parts for Sale26-7 hdlight bar 80.00, 26-7 front wire wheel hubs 135.00 ea, 1 pr 26-7 front hubs need repair each one need std put in, studs included, one needs hole redone before stud goes in 95.00 ea, 1 pr rear 26-7 wire wheel hubs one rusty 100.00, one needs 2 studs included, and a new drum , get from John McLaren 75.00, 26-7 tourng top bows w/ original wood 700.00, 2-used 26-7 touring, 2 and 4 dr right rear fenders 375.00 ea, all plus UPS or prepay and I'll deliver to Chickasha in March
John Danuser <danuser8@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA 65251-3730 - Fri Feb 19 10:16:41 2010Car for Sale:Two 1926 Ford Model T roadsters, exactly alike, one completely restored with all options [Warford, Ruckstel, etc.], the other factory original unrestored. First $9,750 takes either one. Pictures by e-mail.
David Grant Stewart, Sr. <dstewart@amnix.com> (303) 670-1375
28089 Pine Drive, Evergreen, CO 80439 - Fri Feb 19 01:07:03 2010Information:FREE FREE FREE !!!! 4 model T hubs ( front and rear )attached to 600.16 rims and tires ... good to roll a project around on ..... also a frame, not perfect but fixable. come and git 'em remove NOSPAM to contact me i am halfway between toledo and cleveland THANKS MTFCA !!
tim morsher <tmorsherNOSPAM@neo.rr.com>
norwalk, ohio USA - Thu Feb 18 23:23:31 2010Parts for SaleNew Old Stock right rear fender for 1926-27 tudor model T Ford. This may fit other models as well. I'm not sure, you may know better than I. All it needs is a new paint job. This fender has never been installed on a car. $400.00 and buyer pays shipping. Contact Tom Elliott 928-305-5475
Tom Elliott <twoelliott@msn.com> 503-644-9374
12185 S. W. Parkway, Portland, Or. USA - Thu Feb 18 21:25:28 2010Parts WantedLooking for a restorable 26-27 drum type tail lamp.Please include price and a phone number if possible when responding. Thanx,Terry.
Terry Smith <shepherdsbodyshp@omnicityusa.com> 260-982-8315 8 to5 Mon-Fri
311 BOND ST., NO.MANCHESTER, INDIANA USA - Thu Feb 18 14:26:30 2010Parts for SaleTire Carrier, dual for the rear of a Touring Car, holds 1 30x31/2 and 1 30x3 tire. Picture available by email. $125.00 plua shipping.
JimLightfoot <sjlightfoot1@aol.com> 303-680-5989
4353 S Jasper St., Aurora, Co USA - Wed Feb 17 18:22:44 2010Parts for SaleThis is tour lsat to order your radiator to be delivered to Chickasha these are brassworks radiators call for current price Townsent Model T Parts & Engine rebuilding
Ken Meek 636-221-1926
- Wed Feb 17 18:06:21 2010Car for Sale:I am looking to purchase a pre 1926 Model T Ford transmission. If you have a spare one, or one that is complete but in a basket, I am interested. I do not need the flywheel, but will take it if it is assembled. Drop me a note or call.
Thanks, Alan
Alan Dewsnup <alsfarms@hotmail.com> 435-864-3667
4545 S. $000 W., Deseret, UT USA - Wed Feb 17 08:59:42 2010Parts WantedNeed lower dash bracket that attaches steering column to the lower dash on a 26-27 roadster.
Terry Smith <shepherdsbodyshp@omnicityusa.com> 260-982-8315 8 to5 Mon-Fri
311 BOND ST., NORTH MANCHESTER, INDIANA USA - Tue Feb 16 14:35:59 2010Parts for SaleAll Brass E&J sidelamps and tailamp . Complete with fonts
and burners . One sidelight needs new glass for door . Need
polishing . Asking $325 plus shipping .
Dan Smithwick <daniel.smithwick@charter.net>
Eastford, CT USA - Tue Feb 16 12:17:42 2010Parts for SaleFree Shipping on Model T Engines - Professional rebuilt engines including; new poured Babbitt (mains, rods and ball cap), crank ground and polished, line bored to match crank, cylinders bored to .0x0" over, new aluminum pistons, new rings, new piston wrist pins and bushings, cam polished, new cam bearings, magneto magnets recharged (13 VAC at idle, 30 VAC at speed and starts on magneto), new Kevlar transmission linings, new transmission bushings, new Jack Rabbit Clutch, rebuilt carburetor, valve/lifter guides installed if needed, new valve seats if needed, valves lapped, starter/generator rebuilt if needed, generator adjusted for output, exhaust manifold straightened if warped and all new gaskets and paint. All engines are 'run in', in a fully instrumented test stand and are monitored for all critical aspects of operation, come see one run today. Please visit our web site at: www.texomats.com Contact us to set up a demonstration. 903-819-1452
Full machine shop, vatting, magnafluxing, all Babbitt work, main line boring, rod line boring, cylinder boring, cylinder sleeves, new valve seats, new valve/lifter guides, decking, welding, brazing, cold stitching, all rebuild services available.
FREE SHIPPING, save a $1000.00, we will once again be attending Chickasaw Swap Meet in March, we can pick up or deliver your engine at the meet, at no charge.
Chris Dailledouze <chris@texomats.com> 903-819-1452
Sherman (North of Dallas), TX USA - Tue Feb 16 09:30:59 2010Information:wanting to know what a 1921 coupe would be worth- two speed rearend rockymountain brakes in good shape drives real well. 1917 touring runs and drives well. 1916 roadster runs body off taken apart two speed scotthall
russ <willys1951m38@yahoo.com>
USA - Mon Feb 15 19:50:40 2010Parts WantedI am looking for a 26/27 T Transmission brake
drum, with clutch shoes that go inside the drum if you have them.
Thanks to everyone that resonded to my ad for a drive plate, I found one via the ad
Dave Fretwell <scarcliffe@sbcglobal.net> 805 238 4970
Paso Robles, Paso Robles, Ca USA - Sun Feb 14 20:05:56 2010Parts for Sale1912 - 14 LHD Hogs Head , aluminium , rear corners broken and missing , needs welding repair , one C pedal well worn, US $ 25-00 plus P/H US $ 30-00 , via Australia Post.
Bill Formby <dandrdare@bigpond.com> 01161356252344 or 01161488288164Parts for Sale1908 - 1909 Wheels X2 30"x3" No Hubs, excellent original condition, original paint and faint pinstriping beautiful wheels, will post via post office US $ 650-00 for the pair P/H - enquire for shipping cost.
Bill Formby <dandrdare@bigpond.com> 001161356252344 or 01161488288164
Australia - Sun Feb 14 19:40:10 2010Parts for Sale1910 - 14 LHD Handbrake VGC US $ 75-00 P/H US $ 20-00
Bill Formby <dandrdare@bigpond.com> 001161356252344 or 01161488288164
Australia - Sun Feb 14 19:32:49 2010Parts for Sale1911-12 LHD steering bracket with large part numbers underside, US $ 85-00 plus P/H US $ 20-00.
Bill Formby <dandrdare@bigpond.com> 01161356252344 or 01161488288164
Victoria Australia, Australia - Sun Feb 14 19:29:51 2010Car for Sale: 1926 Model T Touring 11,800.00 OBO Price reduced. The car has been recently painted with a nickel green body with black fenders and running boards. The extra stanchions on the body are for an all weather kit that was installed in the past. New interior including all upholstery and 12 piece panel kit. New battery, water pump, and belt. Professionally rebuilt carb. The car is a nice driver starts and drives excellent. It will need a new top in the future as the previous owner did several repairs to the top (top does not leak). The car will need a new front rt inner tube. There is a small oil leak at the tranny tail housing. A couple of flaws in the paint that I can provide pictures of. Email for picturs and more info.
James Edwards <jamesedwrds101@msn.com> 303-522-2813
2184 Pleasant Hill Circle, Parker, CO USA - Sun Feb 14 15:49:04 2010Car for Sale:Model T shriners fire truck, 3 hp briggs engine, has bell windshield surround, and 4 better tires to go on the plastic wheels, not running, but not stuck either red in color, has the ladders on it, red upholstery 1000.00 if prepaid I'll deliver to Chickasha next month
John Danuser <danuser88@socket.net> 573-642-2473
4898 State Rd HH, Fulton, Mo USA65251-3730 - Sun Feb 14 15:05:26 2010Cancel Prev Ad:The ad pertaining to 1910 model T replica has been sold to be delivered to Chickasha to the prewar swap meet March 17th.18th 19th and 20th. Thanks for all of your inquiries
and interest, I have been promised a small down payment to hold for A gentleman in North Carolina. who was happy to get it.
Robert M Davis <Davisbovi@aol.com> 580 529 3733 Cell 580 351 7052
85 Lakeview Drive, Lawton,, ok USA73507 - Sun Feb 14 13:11:56 2010Car for Sale:Pair of Early Model T Rear Axle Brake Drums, good condition, No Pitting. For picture and other information please visit URL http://modeltauction.com/ProBid/ Dave Huson <modelt12@msn.com> 303-774-9246
2116 Charro Ave, Longmont, Co USA - Sun Feb 14 12:48:39 2010Parts WantedLooking for 4 good condition wood coils with shorted condensers for rebuilding. Also looking for timers (roller type)in good condition with bad or broken contacts for rebuilding. Ford script coils and timers perferred. Reply to: mkossor@comcast.net
Mike Kossor <mkossor@comcast.net>
Kenilworth, NJ 07033 - Sun Feb 14 00:20:52 2010Car for Sale:i'm looking for a speedometer setup for my Model T speedster.
Rick Patton <rcpatton@webtv.net> 484 695 3933
5622 Emmaus Road, Emmaus, Pa. USA - Sat Feb 13 23:34:49 2010Car for Sale:i know this is asking for the impossible. iam looking for a DOHV head. iam restoring a 1917 Model T Speedster.
or any race head.
Rick Patton <rcpatton@webtv.net> 484 695 3933
5622 Emmaus Road, Emmaus, Pa. USA - Sat Feb 13 22:42:16 2010Parts for SaleOr trade. International six speed special truck parts. Have a rear axle, transmission, cylinder head, and oil pan. I would like to sell or trade these parts for Model T parts. Remember to remove nospam from e-mail.
Dan Protexter <Protexter@Q.comnospam> 712-259-1808
2911 S. Lyons, Sioux City, Iowa USA - Sat Feb 13 14:47:27 2010Literature for SaleFloyd Clymer's Historical Motor Scrapbooks, Number One and Number Two, these are the original hard-cover books copyrighted in 1944,not later reproductions, plenty of T ads and articles, excellent condition, $90.00 for the pair including postage.
Tom Williams <TModelTom@hotmail.com> (386)756-4651
5835 Mystic Dr., Port Orange, FL 32127 - Fri Feb 12 10:07:06 2010Car for Sale:Replica 1910 Model T Ford Shriners Parade Car 3 H P.Briggs and Stratton engine in excellent shape 16x2.125 Bicycle Tires Wood Spoke wheels Excellent Condition ( new Price $1650.00 My asking price $1,000.00 OBO will be in Chickasha
Prewar Swap Meet March 18,19,20. 2010 Have some T Parts
complete Engine (1919 model I think.
Bob Davis <Davisbovi@aol.com> 580 529 3733 Cell 580 351 7052
85 Lakeview Drive, Lawton,, ok USA 73507 - Thu Feb 11 22:40:49 2010Car for Sale:I will have three Antique Cars in Chickasha Prewar Swap meet
1929 Model A Ford Roadster older restoration nice $16,500.00
1926 Model T Ford touring nice wire wheels speedometer new tires Texas distributor (nice) $11,000. 1927 Model T Ford Touring no top has custom Cover White body painted with brush wire wheels new tires almost perfect body and fenders all steel. $ 6,000. package deal $32,500.00 No Foreign Spammers. Cash no checks unless they will clear American Bank. Swap Meet March 18,19,20 2010 Will be there 17th.
Bob Davis <Davisbovi@aol.com> 580 529 3733 Cell 580 351 7052
85 Lakeview Drive, Lawton,, ok USA 73507 - Thu Feb 11 22:24:21 2010Parts WantedStill in need of good E&J Headlights for 1913-14 Model 656, 666,or 66. Needs to be in the US.
Brian Heyd <rsauto@drtel.net> 701-883-4245
504 4th Ave SE, LaMoure, ND USA - Thu Feb 11 20:22:42 2010Parts for Sale6volt Starters - rewound armature with new shaft, modern seals, bearings, all new parts inside. Also have two spare armatures if anyone needs one - new shaft, new copper. Gen III Antique Auto <mtfca@modeltengine.com> 774-213-1790
MA USA - Thu Feb 11 18:58:12 2010Parts for SaleTT running boards. I have a nice pair of the "boot scraper" running boards that have been cleaned up and powder coated. These are ready to bolt on. $100 Have pictures if you want them.
Gary Tillstrom <gtillstrom@aol.com> 901-496-5527
Atoka, TN USA - Thu Feb 11 15:51:27 2010Parts for SaleWooden 2-man body for a Model T Ford speedster. Consists of the wooden "skeleton" from the firewall to the back of the 2 seats. Also have made the pattern so the car can be skinned in aluminum or steel. Nothing else. Pictures available. Asking $600/bo.
Mark <mark.arnold@gmail.com > (650) 740-5580
USA - Thu Feb 11 15:48:09 2010