MTFCA Forum

Still available make offer

Still available.

Dennis,
Sent private message.
Thanks

FS: Brass Nonpareil "Triple Twist" horn. Probably not originally for a T, I'm guessing this is for a pre-1908 car judging by the shape of the trumpet bell. It will work on a Speedster or Depot Hack since it is left-handed bell-up. There are a few dings and repairs but it has been professionally poli...

Still available.

For sale: Another E & J "Patented 1908" brass tail light. This tail light is a combination of parts from an original side light and reproduction tail light sides and doors. The reflector, fount collar, and fount are reproductions as well. A burner is not included. The bottom section of the chimney w...

Sold. Thanks MTFCA.

Spoken for. Thanks MTFCA.

Tim,
Good observation - I didn't think of that. Probably a good idea to leave it for a car that's driven a lot... with my luck I'd pay to have it straightened and then bang a new dent in that very spot the next day!

This horn has been sold. Thanks MTFCA

spoken for. Thanks MTFCA

Still Available.

FS: One Johns-Manville speedometer, with Ford logo, which I believe fits a 1915. This is probably good for parts only, there are rust stains inside and the needle is missing. Asking $20 +shipping. Thanks for looking.

FS: 4 pcs. Acetylene burner strikers. These were typically used for indoor applications but a lot of guys like to accessorize carbide headlights with these. These will need work. The mechanisms are more complicated that what you usually see - these are supposed to work with just a quick pull rather ...

For sale: A Standard "Single Twist" horn correct for 1914. This one has been polished but as you can see the metal is still wavy in some parts due to some dents that were removed. There is also a crack at one of the joints that has been soldered, and the screen is missing. Good for a speedster or a ...

FS one nice unrestored "Standard" brass horn, correct for 1914 (and possibly late 1913.) A few dings are present but the metal is quite solid. The grille and screen are still intact as well. Asking $135 + shipping. Thanks for looking. stdh01.jpg stdh02.jpg stdh03.jpg stdh04.jpg stdh05.jpg

For sale: Another E & J "Patented 1908" brass tail light. This tail light is a combination of parts from an original side light and reproduction tail light sides and doors. The reflector and fount are reproductions as well. A burner is not included. The bottom section of the chimney was cracked so i...

Sold. Thanks, MTFCA.

FS: One older reproduction E & J "1908" Tail Light. Very good condition except for a few minor scuff marks on the rear of the light (they are hard to see in the photos.) The brass is freshly polished. Asking $225 not including shipping. Thanks for looking. tejtlg01.jpg tejtlg02.jpg tejtlg03.jpg tejt...

I needed to tear down the transmission cover to replace a worn-out low-speed notch, so now would be a good time to refresh any other worn parts. I see there's some wear and slop on the bronze clutch support ring (see photo.) Is this something I should worry about? I don't think anyone's reproducing ...

FS: Doors for left side E&J "1908" cowl lamps, reproductions. They will fit but you may need to file the hinges a bit to make them fit. These are reproductions that were set aside for various reasons, one has a crack in the glass, there may be slop in the hinges on the other two. Probably OK for a d...

No we're not dead yet. We just haven't held any meetings for a while, thanks to social distancing.

FS: A bunch of drums and backing plates that I believe fit a Nash Metropolitan, or possibly Morris Minor and a few other UK makes. Brums are p/n ATA7134. These were sometimes adapted to Model T's in the past. Selling one pair front brake backing plates for $25, two pairs rear for $20 ea, and drums f...

FS: 1 pair Gas lamp igniters, "Larsen Gas Jet Igniters." I believe these were intended for indoor gas lamps but I've seen guys install similar ones on carbide headlights. These are steel and would be appropriate for a "black & brass" era car (1913 or 1914.) Asking $35 for the pair, not including shi...

Seller says they're in Los Angeles but none of the car pictures look like they were taken anywhere near LA. Caveat Emptor!

Control shaft bearings are sold. Thanks.

FS: some small later parts I don't need that I don't want to hassle with eBay. First is 4 pcs. original and 2 repop hood catches. The repops are brass. The originals have some rust issues. Asking $5 for the lot, not including shipping. 3 pcs. hand brake control shaft bearings, $3 for the whole lot n...

FS: one front fender bracket for a 1914-1916 Ford T. This one has issues, the bottom mounting point has been chiseled off and someone tried to lengthen the arm by hammer-welding a nail set tool into it. Probably restorable by someone who knows how to weld and doesn't mind a challenge. It has been sa...

For Sale 2 original glass doors for E & J "1908" side lights, left hand side. Correct for 1909-1912, possibly early 1913. Original glass and frames, they have just been polished. Some minor scratches are present in the glass. Asking $35 each, not including shipping. Thanks for looking. ejdr2x02.jpg ...

Spoken for. Thanks MTFCA.

For Sale - one taillight and one pair of sidelights, E & J "1908" "Black & Brass" probably correct for late 1913 and early to mid 1914 Model T Fords. The first tier of the chimney is steel as are the bottoms of the founts, and there are no jewels on the backs of the side lights. Unrestored, there ar...

If #3 is still available I will take them.

Screws are all spoken for. Thanks.

If you missed out on the first go around I found about 5 more lbs. of this size wood screw (#8 x 1 1/8") however, these are a little newer and quite a bit less rusty. Same deal as before you pay shipping and they're yours. I also have maybe 1 or 2 lbs of 8 x 32 Slotted Oval Head Machine Screws, made...

I still have about 5 pounds left of these but they're rusty. You might be able to clean them up with a wire wheel. If you want to give it a try and let me know.
Thanks

Mark,
I'll take a set if any are left.
Thanks
Rodger

Just to give you an idea I can fit 4 Lbs and some change in a small flat rate box. There's still enough to go around.

I inherited about 20 lbs of #8 1 1/4" slotted head wood screws. Most of them have surface rust. These are quite old, and look a lot nicer than the phillips head screws they sell at Home Depot. If anyone wants some of them lease let me know, you pay mailing costs and they're yours. Thanks for looking...

If these parts are still available I'll take 'em.
Thanks!

For sale - 5 pcs. reproduction cast ends for early radius rods, cast in brass. Unmachined raw castings. The originals were forged but these would look nice on a brass speedster or something along those lines. All 5 for $25 not including shipping. Thanks for looking.

More Junk E & J parts. The tops have too many stress cracks to make restoration worthwhile; they maybe OK for display purposes. You pay shipping and they're yours. Thanks for looking.

Andrew,
Bob passed away a few years back. His family still has the town car, as far as I know. It was a little rough; it didn't have the correct windshield.
Thanks,
Rodger Erickson

Has anybody had any luck getting those inner races off with one of these?

Still Available.

Any interest in this?

Spoken for.
Thanks MTFCA

For Sale: One True-Fire magnet and sensor by Bittner Engineering - these are the parts that go inside an original timer. Untested. These are the only True-Fire parts I have. Asking $20 for both pieces, not including shipping. Thanks for looking.

Spoken for.
Thanks MTFCA.

FS: Very used Front & Rear Hassler Shocks. The holes for shackle pins in the shock arms are wallowed out, and in some cases someone tried to braze them back up. The springs & bases look OK, however. Asking $50 not including shipping, hopefully that's cheap enough for a quick sale. Thanks for looking...

More pictures:

More photos available upon request.

For sale: One E & J "Patented 1908" brass tail light. This tail light is a combination of parts from a nice original tail lamp that got "scrunched" and an incomplete side light that served as a parts donor. The glass lenses are original. The reflector is original with new nickel plating. The fount i...

Sadly I don't have any leads on original fenders that are salvageable, so I will be going with Rootlieb fenders. Their catalog has both early and late fenders... it would be interesting to know how many they sell of each type.

Obviously there's no hard-and-fast rule, but approximately when did Ford switch from the "early" 1913 front fenders to the "late" ones?
Which style would be more correct for a car with a May casting date?
Thanks in advance for your help.
Rodger E.

How does $200 sound?

Still Available

Still Available.

FS: two brass doors from Edmunds & Jones "1908" side lights, fits 1909-1912 Model T Fords. Original doors with reproduction glass and glass frames. Good copies of the original beveled glass. The left hand side door has a reproduction pin, the one in the right is original. Asking $40 for the right si...

For Sale: One brass Nonpareil Single Twist Horn as used on Model T Fords from 1914. Steel Oval Mounting Bracket. Missing the grille and rim. It was polished at one time but there are a few small dings still present. Not perfect but quite nice overall, definitely above average. Asking $115 not includ...

FS Brass Nonpareil horn fits Late 1913 thru 1914 missing grille has quite a few dents but restorable, nice solid heavy brass. Asking $50 + shipping.
Thanks for looking.

For sale - some "black & brass" side lights for 1914 Model T Fords, along with a Solar Light. Oddball T Lights that I don't have pairs of. Used condition all of them will need new paint at the very least. From Left to Right: 1. E&J Model 32 Passenger Side, with integral bracket, includes burner and ...

Still have the Rubes horn - make offer.

Still available

FS: A rough John Brown Model 16 headlight. The brass is rough, the mirror is broken to pieces and there is some rust-through on the back of the bucket. Asking $45 for this one not including shipping. Thanks for looking.

Selling two Ford Script Corcoran headlights c. 1914, in "Barn Find" condition. One is missing the brass door, both smoke bonnets will need work, the steel buckets themselves have plenty of surface rust but are actually quite solid, no rust thru or major dings. The good news is that both mangin mirro...

The Rubes horn is still available. Thanks for looking.

Lights are sold.
Thanks MTFCA.

FS: Model T Headlights, c. 1917-1925, in "barn find" condition. These are individual lights that I've collected, no pairs. These would be nice for a survivor car. No major damage or rust-thru that I can see. From left to right: "Ford Brown" script, "Ford" script only, "Ford 440" (I believe this is a...

Spoken for.
Thanks MTFCA.

FS: One rough but probably restorable Victor Headlight c. 1914 with a steel Ford script smoke bonnet. This is the so-called "ugly" Victor head light - it looks like a truck headlight. Rough but restorable, there is some rust-out on the smoke bonnet; the bucket has some pitting but is still quite sol...

Free: Two centers with gears from cracked Model T Ford reverse drums, good for cores. These both appear to have decent usable teeth not perfect but OK for reverse. You pay shipping. Thanks for looking.

For Sale 4 pcs. running board brackets for Late Teens T's. One is rough, one is marginal, two are nice. Asking $30 for the bunch, not including shipping. Thanks for looking.

Free to good home - a couple of rough brass pieces from 1913-1915 bulb horns. Thin brass with lots of dings. You pay shipping. Also have a bunch of real early horn brass pieces, again these are rough with lots of dents and metal fatigue issues. Yours if you pay shipping. Getting rid of these because...

The brass doors are spoken for. Still have the black & brass ones.. Thanks for looking.

Some additional pics of the "Nonpareil" horn:

Here are some additional pics of the "Rubes" horn:

For Sale: One Nonpareil "double-twist" horn in very rough condition, missing the bracket and the fitting at the end, lots of dents and a few cracks, probably parts only, or a wall-hanger. Asking $30 not including shipping. Also selling one Rubes double twist in rough condition, mostly complete excep...

email sent. Thanks

Great photos! The rear axle and full-elliptical springs in the second car are from a Ford N-R-S. I don't know about the rest of the car.

OK it's free but you have to pay shipping.
Thanks

For Sale - one pair of E&J "1908 Side Light or Cowl Lamp doors, fits 1913-1914 "black & brass" side lights. Doors are original, new lenses and brass trim. Asking $75 for the pair not including shipping. Also one pair of E&J Brass-Era side light doors c. 1908-1912. Original frames with new lenses, cl...

FS: 2005 Membership directory for MTFCA. Nice thick heavy book, in very good condition, that I just don't have room for. Yours for $5 + shipping (USPS Media Mail.) I'll also throw in an old copy of Clymer's "Henry's Wonderful Model T" which is missing the dust jacket. Thanks for looking. mdir01.jpg

Spoken for.
Thanks, MTFCA.

Still available.

The Corcoran light is gone.

Book is spoken for. Thanks MTFCA.

For Sale used copy of "The Ford Century" good condition, has a few fingerprints in places but otherwise very little wear. Lots of nice Model T and early Ford pictures. I have more than enough Model T books as it is so this one has to go. Asking $4 + shipping. I can ship this book rate to save a litt...

FS one pair of Edmunds & Jones Brass Side Lights. These, I believe, are correct for a late 1912 or a very early 1913, they are brass but have holes in the lower tier similar to the later steel lamps. These lights started off as a nice pair of originals that were polished and the mirrors replated wit...

The E&J Model 32 (second from the left) is spoken for. The rest are still available. All are Right Hand Side laps except for the tail light and the lopsided Corcoran lamp. Thanks for looking.

For Sale - 6 pcs. body irons that I believe are correct for a 1917-1922 Ford T Touring. Included are 2 rear saddle irons, 2 pivot brackets and two front seat brackets. I don't think these all came off of the same car; I just selected what looked like a complete set out of a pile. Asking $25 not incl...

Nice find. I don't think there are very many sheet metal parts from a touring that can be used on the town car, unfortunately. In particular the quarter panels and rear panel are unique to that body style (see pic.) Not the step on the very bottom. It looks like you've got most of the hard parts lik...

Make Offer!

Search found 121 matches