Search found 2337 matches
- Sun Nov 05, 2023 12:07 pm
- Forum: Classifieds - Parts
- Topic: SOLD 1926/27 chassis FS
- Replies: 19
- Views: 3056
Re: 1926/27 chassis FS
Email sent
- Tue Apr 26, 2022 8:44 am
- Forum: OT - Off topic
- Topic: Galveston, what car is this
- Replies: 11
- Views: 1806
Galveston, what car is this
Can anyone identify the roadster in the picture ?
- Tue Apr 26, 2022 8:39 am
- Forum: General Discussion Forum
- Topic: What Have You Done to Your Model T in April?
- Replies: 69
- Views: 7977
Re: What Have You Done to Your Model T in April?
Mine started right up after sitting all winter. I did start it a couple months ago on a fair day. Got it cleaned up a week or so ago, checked tires, oil and coolant and filled up the tank Saturday. Actually found gas for $3.48 !! While at the station a guy pulled out in a Challenger and burned the t...
- Wed Apr 13, 2022 5:16 pm
- Forum: General Discussion Forum
- Topic: Work-a-Ford belt drive
- Replies: 4
- Views: 1320
Work-a-Ford belt drive
Anyone familiar with this ?
Curious of the cost back when.
Didja all know that your Ford engine will outlast your car ?
Curious of the cost back when.
Didja all know that your Ford engine will outlast your car ?
- Wed Apr 13, 2022 5:13 pm
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
Re: This was trucking-Old Photos
Only in a Jeep !
- Wed Apr 13, 2022 5:12 pm
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
Re: This was trucking-Old Photos
Fill er up, $2.45 !!
Someone know what the truck is ?
Someone know what the truck is ?
- Wed Feb 23, 2022 3:39 pm
- Forum: General Discussion Forum
- Topic: Spark plug condition. Need opinions
- Replies: 2
- Views: 878
Re: Spark plug condition. Need opinions
Unless you drive it and warm it up good (20 miles or so), that looks about normal.
Best way to clean if you want is lightly sandblasting.
Best way to clean if you want is lightly sandblasting.
- Sat Feb 19, 2022 11:19 am
- Forum: Classifieds - Parts
- Topic: WTB. Ford tire kits , any condition
- Replies: 7
- Views: 1350
Re: WTB. Ford tire kits , any condition
“Dave takes the worst pictures I’ve ever seen”
Tim Morsher
Tim Morsher
- Sat Feb 19, 2022 11:18 am
- Forum: Classifieds - Parts
- Topic: WTB: 1914 Windshield Frame
- Replies: 10
- Views: 1866
Re: WTB: 1914 Windshield Frame
I have a nice brass W/S frame, it’s kinda hard to get to right now but snow should be gone this week. I’ll get some pictures then.
- Wed Feb 09, 2022 9:20 am
- Forum: OT - Off topic
- Topic: Buying a vehicle through eBay services
- Replies: 11
- Views: 2287
Re: Buying a vehicle through eBay services
Thanks guys !! I’ve already emailed her and declined. We’ll see if I get any more “instructions”....but I’m out. $1200 for a $5000 car seemed great before the eBay curveball was pitched. EC78630E-FA64-4411-8D36-A06141022E9F.jpeg I really had no idea how eBay motors works but to join up with Craigsli...
- Tue Feb 08, 2022 9:27 pm
- Forum: OT - Off topic
- Topic: Buying a vehicle through eBay services
- Replies: 11
- Views: 2287
Buying a vehicle through eBay services
I responded to a Craigslist ad for a Toyota Camry today and the lady responded and said she is selling it through eBay...long story short, for her protection. Never done anything through eBay motors before, but this just seems strange to me. I’m concerned I’m being scammed. This was the reply after ...
- Fri Feb 04, 2022 1:17 pm
- Forum: Classifieds - Parts
- Topic: Sunday night update. Good misc for sale
- Replies: 6
- Views: 2173
Re: Good misc for sale
I can see why there’s no head gaskets available Tim.
- Fri Feb 04, 2022 1:12 pm
- Forum: General Discussion Forum
- Topic: Complaints? I don’t think so
- Replies: 36
- Views: 3648
Re: Complaints? I don’t think so
A good additional 12” here....plow truck knocked my mailbox down last night. Post is rotten so I packed snow around it for now.
I have not seen snow this deep since I lived here.
Maybe the early 90s since ones like this.
I have not seen snow this deep since I lived here.
Maybe the early 90s since ones like this.
- Thu Feb 03, 2022 5:05 pm
- Forum: General Discussion Forum
- Topic: Complaints? I don’t think so
- Replies: 36
- Views: 3648
Re: Complaints? I don’t think so
Our Mail was on time today and we have a couple inches less than you guys Tim.
You sure picked a good year to stay north.
I still have to look more for the steering part you need.
You sure picked a good year to stay north.
I still have to look more for the steering part you need.
- Wed Feb 02, 2022 11:07 am
- Forum: General Discussion Forum
- Topic: What have you done on your T in February
- Replies: 45
- Views: 6565
Re: What have you done on your T in February
Set the hand brake and hit the starter button and she spun right over. Did not try to start, just checking the battery and splashed some oil around.
- Wed Feb 02, 2022 11:04 am
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
Re: This was trucking-Old Photos
Model A or B ?
- Wed Feb 02, 2022 11:03 am
- Forum: OT - Off topic
- Topic: Henry Ford’s Hemp car
- Replies: 5
- Views: 1792
Re: Henry Ford’s Hemp car
Interesting Bryant, I was hoping for some more information about this, thanks.
FWIW...hemp does not have any THC in it.
Seems like a good source of biofuels.
FWIW...hemp does not have any THC in it.
Seems like a good source of biofuels.
- Sun Jan 30, 2022 2:37 pm
- Forum: OT - Off topic
- Topic: Henry Ford’s Hemp car
- Replies: 5
- Views: 1792
Henry Ford’s Hemp car
Something that might have a bigger band on the bandwagon today.... :) https://www.google.com/amp/s/themeaningofwater.com/2020/10/03/henry-fords-hemp-cars/amp/ 07E86CEB-02E9-4FA7-8169-546FD2632C9C.jpeg “ Ford’s 1941 bioplastic Model T was made of hemp, flax, wheat, and spruce pulp, which made the car...
- Thu Jan 27, 2022 7:26 pm
- Forum: General Discussion Forum
- Topic: Pump your own gas
- Replies: 21
- Views: 3171
Re: Pump your own gas
Maybe the pump is spinning the rim...ThreePedalTapDancer wrote: ↑Thu Jan 27, 2022 5:51 pmThe rim is spinning a flat belt that runs into the pump.
- Wed Jan 19, 2022 10:16 pm
- Forum: Classifieds - Parts
- Topic: WTB: 1927 Model T frame or front cross member
- Replies: 5
- Views: 1219
Re: WTB: 1927 Model T frame or front cross member
I have one Bruce.... I believe it’s a 26.
Send me an email if you don’t still have my number.
Dave
Send me an email if you don’t still have my number.
Dave
- Mon Jan 17, 2022 11:47 pm
- Forum: General Discussion Forum
- Topic: Lookin like this today
- Replies: 10
- Views: 2199
Re: Lookin like this today
Well it's close to that here but not quite! Gonna go plow the driveway shortly. Just talked to Bill in Port Clinton and he got 2 inches. I’m about 25 miles from him in Martin and not 1 snowflake here. :D I’m just west of Akron, see my pictures above. 12-18” and 3’ drifts in places. Have not seen an...
- Mon Jan 17, 2022 4:25 pm
- Forum: General Discussion Forum
- Topic: Lookin like this today
- Replies: 10
- Views: 2199
- Sun Jan 16, 2022 2:12 pm
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
- Sun Jan 16, 2022 2:11 pm
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
Re: This was trucking-Old Photos
..........
- Thu Jan 13, 2022 7:31 pm
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
Re: This was trucking-Old Photos
Obviously nut trees and I won’t mention any names but, as they say... “the nut doesn’t fall far from the tree”
Speaking of nuts, how bout the driver ? One little load shift and his last trip is to Boot Hill !!
Speaking of nuts, how bout the driver ? One little load shift and his last trip is to Boot Hill !!
- Thu Jan 13, 2022 11:15 am
- Forum: OT - Off topic
- Topic: The old ways live on.
- Replies: 20
- Views: 3026
Re: The old ways live on.
Sure glad y’all didn’t have to put her down !
Can she drag some to Ohio ?
Can she drag some to Ohio ?
- Thu Jan 13, 2022 11:13 am
- Forum: General Discussion Forum
- Topic: Who wants to give it a go?
- Replies: 13
- Views: 2260
Re: Who wants to give it a go?
I would love to try it !!
Seems like a helmet might be in order, a electric one and gloves etc in the heated variety.
Funny as a kid, you never seemed to get cold...nowadays !!
Seems like a helmet might be in order, a electric one and gloves etc in the heated variety.
Funny as a kid, you never seemed to get cold...nowadays !!
- Thu Jan 13, 2022 11:06 am
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
Re: This was trucking-Old Photos
Loaded up !!
- Thu Jan 13, 2022 11:04 am
- Forum: OT - Off topic
- Topic: Metz
- Replies: 10
- Views: 2073
Re: Metz
Same thoughts here !!
Looks like you could just pick it up and carry it away.
- Sun Dec 26, 2021 9:40 pm
- Forum: General Discussion Forum
- Topic: OT...But could be useful on some Ts
- Replies: 1
- Views: 943
OT...But could be useful on some Ts
Stay back 50 feet !!
- Tue Dec 21, 2021 1:00 pm
- Forum: General Discussion Forum
- Topic: Starters on backorder
- Replies: 24
- Views: 3511
Re: Starters on backorder
FWIW, I've never had issues starting a vehicle with a 6 volt system, even if the engine is well worn, as long as the electrical parts are in good shape. Same here, proper gauge wires from the battery to the switch and the switch to the starter post. Same thing with the ground to frame and all conne...
- Tue Dec 21, 2021 12:56 pm
- Forum: Classifieds - Parts
- Topic: WANTED - 1915 (or 16) Parts
- Replies: 5
- Views: 1488
Re: WANTED - 1915 (or 16) Parts
Tommy, I also have some 2man top bows...
I think they are a little newer than 15-16, but you can see them if you come to get the engine.
Lots of other parts here, but not much brass car specific.
I think they are a little newer than 15-16, but you can see them if you come to get the engine.
Lots of other parts here, but not much brass car specific.
- Mon Dec 20, 2021 11:58 pm
- Forum: Classifieds - Parts
- Topic: WANTED - 1915 (or 16) Parts
- Replies: 5
- Views: 1488
Re: WANTED - 1915 (or 16) Parts
Tommy, I have a complete 16, late 15 engine.
It turns over is all I really know for sure. Appears to be untouched.
hpautorepairdd at Gmail dot com
Dave
It turns over is all I really know for sure. Appears to be untouched.
hpautorepairdd at Gmail dot com
Dave
- Mon Dec 20, 2021 6:24 pm
- Forum: General Discussion Forum
- Topic: Whats rhe best way to set up your dizzy after repair?
- Replies: 10
- Views: 1716
Re: Whats rhe best way to set up your dizzy after repair?
First be sure you’re on the compression stroke...
Then the rotor should point near #1 on the cap and the points should be just about to open or close to it, at TCD.
Then the rotor should point near #1 on the cap and the points should be just about to open or close to it, at TCD.
- Fri Dec 03, 2021 10:34 am
- Forum: General Discussion Forum
- Topic: It's T related. If you don't see it, maybe you're not a real T nut?
- Replies: 9
- Views: 2036
Re: It's T related. If you don't see it, maybe you're not a real T nut?
I deducted 10 points because of the chrome instead of nickel plating.
- Fri Dec 03, 2021 10:32 am
- Forum: Classifieds - Parts
- Topic: WTB 23-25 Tall Firewall, Need a nice one!!
- Replies: 7
- Views: 1498
Re: WTB 23-25 Tall Firewall, Need a nice one!!
This is one I have. Light surface rust and the hole above the wire block as Steve stated.
- Thu Dec 02, 2021 4:51 pm
- Forum: Classifieds - Parts
- Topic: WTB 23-25 Tall Firewall, Need a nice one!!
- Replies: 7
- Views: 1498
Re: WTB 23-25 Tall Firewall, Need a nice one!!
I have one, I will have to get to it and make sure it’s a high one.
- Thu Nov 25, 2021 7:21 pm
- Forum: General Discussion Forum
- Topic: starter turns over very slowly, gets hot
- Replies: 11
- Views: 1732
Re: starter turns over very slowly, gets hot
Before you take the starter off...
Be sure you have good clean connections at the battery, ground at the frame and the proper gauge wires are used from the battery to the switch and to the starter and the ground cable.
6V does not like a smaller gauge wire like used on a 12V system.
Be sure you have good clean connections at the battery, ground at the frame and the proper gauge wires are used from the battery to the switch and to the starter and the ground cable.
6V does not like a smaller gauge wire like used on a 12V system.
- Thu Nov 25, 2021 12:09 pm
- Forum: General Discussion Forum
- Topic: What are these items I found in a box of T stuff
- Replies: 11
- Views: 2170
Re: What are these items I found in a box of T stuff
I’m thinking these may be a fitting for a heater line. Goes on the block to hook up the heater hoses On a bit pricier vehicle than a T
- Thu Nov 25, 2021 12:05 pm
- Forum: General Discussion Forum
- Topic: Practice pouring Babbitt
- Replies: 19
- Views: 2735
Re: Practice pouring Babbitt
I have a ladle that my dad used to pour the 3rd main with, that has 2 spouts beside each other.
I’ll have to look for it and get a picture.
I’ll have to look for it and get a picture.
- Thu Nov 25, 2021 12:00 pm
- Forum: OT - Off topic
- Topic: Success! First Start of my 1912 Flanders 20
- Replies: 16
- Views: 2805
Re: Success! First Start of my 1912 Flanders 20
Not much better than the feeling of the first time you hear an old car fire off and you are the resurrector.
- Thu Nov 25, 2021 11:53 am
- Forum: General Discussion Forum
- Topic: Snap-on T
- Replies: 31
- Views: 4378
Re: Snap-on T
I have mostly Snap-on sockets and some hand tools. I even owe them a few dollars, but haven’t seen my dealer in a few years. :?: I need to drop off some to my buddy that has a dealer regularly to replace a few broken pieces. Pricey yes, but by far the longest lasting, especially when you use them ev...
- Tue Nov 23, 2021 9:45 pm
- Forum: Classifieds - Parts
- Topic: WTB, Hand crank in good condition
- Replies: 1
- Views: 696
Re: WTB, Hand crank in good condition
I have several Dean, send me an email.
Dave
Dave
- Mon Nov 22, 2021 12:51 pm
- Forum: General Discussion Forum
- Topic: Fine Line Between Hoarding and Collecting
- Replies: 20
- Views: 3260
Re: Fine Line Between Hoarding and Collecting
I have seen the fine line first hand.... Maybe not like the Haven buttttt. For one man just doing swap meets and not trying hard. My old man was on the hoarding side of the line. 40+ spindles, 20-30 coil boxes, 20-30 axle housings and axles, torque tubes, 50 something rods and caps. 2 garages, 1 att...
- Mon Nov 22, 2021 12:35 pm
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
- Mon Nov 22, 2021 11:30 am
- Forum: OT - Off topic
- Topic: This was trucking-Old Photos
- Replies: 1406
- Views: 327253
Re: This was trucking-Old Photos
I chopped this out of a meme...said it was a 1890s garbage truck. I don’t think so. But it’s cool !
What is it says you ?
What is it says you ?
- Mon Nov 22, 2021 11:27 am
- Forum: Classifieds - Parts
- Topic: Wire wheel looking for
- Replies: 12
- Views: 2493
Re: Wire wheel looking for
I have a bunch of T wire wheels that are pretty rough....I’ll let them go cheap.
- Wed Nov 17, 2021 1:22 pm
- Forum: Classifieds - Parts
- Topic: WTB fenders
- Replies: 9
- Views: 1938
Re: WTB fenders
Al, I have a couple different styles, some look like touring but not sure if I have both sides.
Let us know what you want and I’ll look.
I’ll let them go reasonably...
Just west of Akron, Dave
Let us know what you want and I’ll look.
I’ll let them go reasonably...
Just west of Akron, Dave
- Wed Nov 17, 2021 10:16 am
- Forum: General Discussion Forum
- Topic: All points bulletin !!!!
- Replies: 27
- Views: 3964
Re: All points bulletin !!!!
I doubt this was a random theft. I bet the owner has shown the car to the crooks at one point. And the bastards knew what they were doing. We all know T rear wheels don’t just come off with lug nuts. LaGrange is in the middle of nowhere also. Hopefully the parts will find their way home. What brand ...
- Mon Nov 15, 2021 6:28 pm
- Forum: General Discussion Forum
- Topic: Foto of the Day
- Replies: 646
- Views: 168851
Re: Foto of the Day
My buddy Dallas about always sends me his leftovers. Ended up with about 2”
- Mon Nov 15, 2021 6:25 pm
- Forum: Classifieds - Parts
- Topic: Wanted to Buy Model T Ford Ignition Coils
- Replies: 2
- Views: 1135
Re: Wanted to Buy Model T Ford Ignition Coils
Email sent...
- Sat Nov 13, 2021 2:17 pm
- Forum: General Discussion Forum
- Topic: Marietta, March 5, 2022
- Replies: 18
- Views: 3788
- Sat Nov 13, 2021 2:09 pm
- Forum: General Discussion Forum
- Topic: Please help ID door latches and window regulators
- Replies: 7
- Views: 1712
Re: Please help ID door latches and window regulators
I’ll look again Rich, I think the handles are metal.
Pictures of the repops look like 26-27 latches and window lifts...
I will clean them up and see if they are free and post them on the classified sometime.
With better pictures Tim. I just wanted to show both sides.
Pictures of the repops look like 26-27 latches and window lifts...
I will clean them up and see if they are free and post them on the classified sometime.
With better pictures Tim. I just wanted to show both sides.
- Sat Nov 13, 2021 2:04 pm
- Forum: General Discussion Forum
- Topic: Please help ID door latches and window regulators
- Replies: 7
- Views: 1712
- Sat Nov 13, 2021 12:09 pm
- Forum: Classifieds - Parts
- Topic: Wtb pre 1921 engine mount
- Replies: 3
- Views: 1119
Re: Wtb pre 1921 engine mount
I have one Roger, but lacking the U-bolts.
hpautorepairdd at Gmail dot com
Dave
hpautorepairdd at Gmail dot com
Dave
- Thu Nov 11, 2021 4:35 pm
- Forum: General Discussion Forum
- Topic: Please help ID door latches and window regulators
- Replies: 7
- Views: 1712
Re: Please help ID door latches and window regulators
Thanks Rich, I guess I don’t have one...
Anyone on the latches and lifts ?
Anyone on the latches and lifts ?
- Thu Nov 11, 2021 4:33 pm
- Forum: General Discussion Forum
- Topic: what is this car? trying to id
- Replies: 29
- Views: 4470
Re: what is this car? trying to id
Don’t get Ralph started !!
- Wed Nov 10, 2021 6:53 pm
- Forum: General Discussion Forum
- Topic: Please help ID door latches and window regulators
- Replies: 7
- Views: 1712
Please help ID door latches and window regulators
I am pretty sure these are T closed car parts.
Can anyone please verify and tell me what year and a ballpark value ?
Also, does anyone have a picture of the cowl vent handle mechanism ?
Thanks Dave
Can anyone please verify and tell me what year and a ballpark value ?
Also, does anyone have a picture of the cowl vent handle mechanism ?
Thanks Dave
- Wed Nov 10, 2021 1:35 pm
- Forum: General Discussion Forum
- Topic: Model T MPG
- Replies: 24
- Views: 2618
Re: Model T MPG
My touring with 3:1 gearing, HC head OS valves and a Stromberg OF gets a little over 20mpg. I have not checked it lately but the OF does a lot better than the NH that was on there.
- Wed Nov 10, 2021 1:32 pm
- Forum: General Discussion Forum
- Topic: what is this car? trying to id
- Replies: 29
- Views: 4470
Re: what is this car? trying to id
The rear axle and spring look possibly to be Ford.
The rest kinda looks like a conglomeration and some parts homemade. Does it have an engine ?
More pictures might help.
The rest kinda looks like a conglomeration and some parts homemade. Does it have an engine ?
More pictures might help.
- Sat Nov 06, 2021 10:20 am
- Forum: OT - Off topic
- Topic: Restoration of a Ford Model 4-AT.
- Replies: 2
- Views: 1335
Re: Restoration of a Ford Model 4-AT.
I have a faint memory of flying in a Tin Goose as a young boy. Couldn’t have been more than 8 or 10.
I remember it was so loud you had to yell about 2” from someone’s ear to hear. It was up by Lake Erie and we were on a tour with the Model T club.
Put-In Bay if I recall, in the 70s.
I remember it was so loud you had to yell about 2” from someone’s ear to hear. It was up by Lake Erie and we were on a tour with the Model T club.
Put-In Bay if I recall, in the 70s.
- Sat Nov 06, 2021 10:15 am
- Forum: Classifieds - Parts
- Topic: For Sale: Pre 1921 Motor mounts and parts
- Replies: 9
- Views: 2429
Re: For Sale: Pre 1921 Motor mounts and parts
Phillip, would you happen to have 1 U-bolt ?
My cousin Phil is looking for one for his 15 RPU.
Thanks Dave
My cousin Phil is looking for one for his 15 RPU.
Thanks Dave
- Wed Nov 03, 2021 11:02 pm
- Forum: General Discussion Forum
- Topic: Poll: Do you have Model T OCD ?
- Replies: 18
- Views: 2777
Re: Poll: Do you have Model T OCD ?
I’m really proud of Frank, Hank and Dallas, unlike a couple of others that are absolutely in denial. Norm is borderline, but I think he’s ready for the first step of admission. John you must have misunderstood several boxes of starter parts, maybe, here’s a couple... Coil boxes ?? :? And screw jacks...
- Tue Nov 02, 2021 8:13 pm
- Forum: General Discussion Forum
- Topic: Poll: Do you have Model T OCD ?
- Replies: 18
- Views: 2777
Poll: Do you have Model T OCD ?
Model T OCD...obsessive collection disorder ! :lol: I am convinced my father had it bad. Just when I think I’ve found all of a certain parts.... I find a box full of more. I bet I’m up to 50 spindles !! :shock: Starters and boxes full of noses and brush holders Dozens !! Same thing with generators a...
- Tue Nov 02, 2021 1:24 pm
- Forum: General Discussion Forum
- Topic: T compression. Barrettr
- Replies: 11
- Views: 2248
Re: T compression. Barrettr
What Pat said, and how fresh is the engine will be a factor also....
I would say anywhere from 60psi to 80psi is good, as long as all 4 are close to the same reading.
Be sure to do a dry test and a wet test with a little oil in the plug hole to see if the rings are sealing, if the dry reading is low.
I would say anywhere from 60psi to 80psi is good, as long as all 4 are close to the same reading.
Be sure to do a dry test and a wet test with a little oil in the plug hole to see if the rings are sealing, if the dry reading is low.
- Wed Oct 27, 2021 7:30 am
- Forum: Classifieds - Parts
- Topic: Want to buy or borrow a rim spreader in NW Arkansas
- Replies: 4
- Views: 1221
Re: Want to buy or borrow a rim spreader in NW Arkansas
Mike I have a couple...
I’ll send you an email later today.
Dave
I’ll send you an email later today.
Dave
- Tue Oct 26, 2021 7:41 pm
- Forum: General Discussion Forum
- Topic: Help reading connecting rod caps
- Replies: 4
- Views: 1306
Re: Help reading connecting rod caps
The rod bearing surface is not chamfered on the ends properly and also no oil hole for a dipper.
- Tue Oct 26, 2021 3:48 pm
- Forum: Classifieds - Parts
- Topic: T-wrench for 1926 wire spoke wheel lugs - Found
- Replies: 14
- Views: 2940
Re: Need help finding a T-wrench for 1926 wire spoke wheel lugs
I did look to no avail....sorry.
- Tue Oct 26, 2021 1:03 pm
- Forum: Classifieds - Parts
- Topic: T-wrench for 1926 wire spoke wheel lugs - Found
- Replies: 14
- Views: 2940
- Mon Oct 25, 2021 5:56 pm
- Forum: Classifieds - Parts
- Topic: WTB Hand Crank-1924
- Replies: 1
- Views: 758
Re: WTB Hand Crank-1924
I have what you need Miles....
Dave, hpautorepairdd at Gmail dot com
Dave, hpautorepairdd at Gmail dot com
- Sun Oct 24, 2021 11:59 am
- Forum: Classifieds - Parts
- Topic: Sold !! 3 Nickel hubcaps
- Replies: 2
- Views: 906
Re: Sold !! 3 Nickel hubcaps
Sold to Scott, thanks and thanks MTFCA
- Sun Oct 24, 2021 11:52 am
- Forum: OT - Off topic
- Topic: What makes you love the collector car that no one else does?
- Replies: 23
- Views: 3655
Re: What makes you love the collector car that no one else does?
Possession is often a good start.
- Sun Oct 24, 2021 11:49 am
- Forum: General Discussion Forum
- Topic: Sheared Pinion Key - Can I Reuse Drive Shaft?
- Replies: 10
- Views: 1716
Re: Sheared Pinion Key - Can I Reuse Drive Shaft?
That driveshaft has had it, I would suspect the pinion gear is also. The fit of the taper is as or more important than the key to keep it from spinning and shearing the key again. The gear should lock down on the shaft even without a key in place and not rock....
- Sun Oct 24, 2021 11:44 am
- Forum: General Discussion Forum
- Topic: MODEL T's & Halloween
- Replies: 19
- Views: 3399
Re: MODEL T's & Halloween
I put this on the summer over thread, but here’s the wife and some mums and pumpkins we got locally the other day.
- Sun Oct 24, 2021 11:40 am
- Forum: Classifieds - Parts
- Topic: FS Crankshaft pulley, later size
- Replies: 0
- Views: 565
FS Crankshaft pulley, later size
Large diameter crankshaft pulley in good condition. $30 including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
Please contact via email at hpautorepairdd at Gmail dot com
- Sun Oct 24, 2021 11:36 am
- Forum: Classifieds - Parts
- Topic: Sold !! 3 Nickel hubcaps
- Replies: 2
- Views: 906
Sold !! 3 Nickel hubcaps
Some patina but not beat up, nice threads, all match...$40 for all 3 including shipping USA.
Please contact via email at hpautorepairdd at Gmail dot com
Please contact via email at hpautorepairdd at Gmail dot com
- Sun Oct 24, 2021 11:33 am
- Forum: Classifieds - Parts
- Topic: FS Generator cut-out
- Replies: 0
- Views: 612
FS Generator cut-out
Ford script generator cut-out.
$45 including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
$45 including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
- Sun Oct 24, 2021 11:29 am
- Forum: Classifieds - Parts
- Topic: FS Outer front wheel bearings
- Replies: 0
- Views: 652
FS Outer front wheel bearings
One pair of Timken used bearing cones with nuts and washers. $80 including shipping USA Please contact via email at hpautorepairdd at Gmail dot com D9B21BC8-60D3-4FB1-87FB-7610774BE00E.jpeg 93140481-AF3F-4D79-9D0C-8151728C63D9.jpeg 2- Timken left hand thread bearing cones for the right side....THIS ...
- Mon Oct 18, 2021 7:36 pm
- Forum: Classifieds - Parts
- Topic: WTB U Bolt for rear spring
- Replies: 5
- Views: 1076
Re: WTB U Bolt for rear spring
I have a few, what size ?
7 or 8 leaf ?
7 or 8 leaf ?
- Sun Oct 17, 2021 4:28 pm
- Forum: OT - Off topic
- Topic: Separating Mixing Bowls: Vexing!
- Replies: 15
- Views: 2892
Re: Separating Mixing Bowls: Vexing!
You could give it to my old boss and tell him there’s a half dollar in between them....
- Sun Oct 17, 2021 3:25 pm
- Forum: Classifieds - Parts
- Topic: Wood spoke wheels or enough parts to re-spoke them for my 1927 Touring
- Replies: 4
- Views: 1365
Re: Wood spoke wheels or enough parts to re-spoke them for my 19277 Touring
Sent you an email Bruce,
Dave
Dave
- Wed Oct 13, 2021 6:12 pm
- Forum: General Discussion Forum
- Topic: Looks like Summer's over
- Replies: 16
- Views: 2727
Re: Looks like Summer's over
Great fall day here, about 72 and sunny.
Went to a friend’s farm up the street and got some pumpkins and they gave the wife some nice mums too !!
Went to a friend’s farm up the street and got some pumpkins and they gave the wife some nice mums too !!
- Tue Oct 12, 2021 12:05 pm
- Forum: General Discussion Forum
- Topic: Looks like Summer's over
- Replies: 16
- Views: 2727
Re: Looks like Summer's over
Fortunately we have a few more weeks south of the Great Lakes. HOPEFULLY !!
77 the high today.
77 the high today.
- Tue Oct 12, 2021 12:02 pm
- Forum: Classifieds - Parts
- Topic: wtb front wheel bearings
- Replies: 1
- Views: 766
Re: wtb front wheel bearings
William,
Sent you a text, Dave
Sent you a text, Dave
- Sun Oct 10, 2021 9:53 am
- Forum: Classifieds - Parts
- Topic: Early 1920s Canadian Model T Touring
- Replies: 9
- Views: 2184
Re: Early 1920s Canadian Model T Touring
Early 20s is rather vague...23-25 would be a slanted windshield and before 23 is straight.
And any difference in a Canadian models could be pointed out.
I have both styles for US vehicles.
And any difference in a Canadian models could be pointed out.
I have both styles for US vehicles.
- Mon Oct 04, 2021 4:44 pm
- Forum: OT - Off topic
- Topic: Stick welding aluminum
- Replies: 11
- Views: 2630
Re: Stick welding aluminum
What exactly are you going to weld ?
MIG or TIG is used more often for aluminum.
MIG or TIG is used more often for aluminum.
- Mon Oct 04, 2021 4:41 pm
- Forum: General Discussion Forum
- Topic: Difficulty getting 30-35 lbs of torque on Ruckstell Ring GearBolts
- Replies: 22
- Views: 2559
Re: Difficulty getting 30-35 lbs of torque on Ruckstell Ring GearBolts
Joe, new ring gear ?
Did you chase the threads in it ?
Did you chase the threads in it ?
- Fri Oct 01, 2021 8:43 am
- Forum: General Discussion Forum
- Topic: Windshield Stanchions
- Replies: 16
- Views: 2016
Re: Windshield Stanchions
I see that the factory has wing nuts on the lower panel....mine has a clip for the side curtains fastened there. Is the lower panel supposed to open ?
I have a couple good windshield frames BTW, if interested John.
I have a couple good windshield frames BTW, if interested John.
- Fri Oct 01, 2021 8:17 am
- Forum: Classifieds - Parts
- Topic: Wheel Bearings Where Are They????
- Replies: 12
- Views: 2240
Re: Wheel Bearings Where Are They????
I have a good used pair of the outer threaded bearings...$80 if interested, email me at hpautorepairdd at Gmail dot com
- Thu Sep 30, 2021 5:12 pm
- Forum: General Discussion Forum
- Topic: Steam in the Exhaust!
- Replies: 25
- Views: 2807
Re: Steam in the Exhaust!
I would suggest still checking the head with a straight edge. Also run a bottoming tap in the bolt holes and blow out with compressed air. Also be sure all the bolts are the correct length and all tighten without a gasket in place. Copper spray sealer on a copper head gasket and torque to 45ftlbs. R...
- Wed Sep 29, 2021 9:51 am
- Forum: General Discussion Forum
- Topic: Steam in the Exhaust!
- Replies: 25
- Views: 2807
Re: Steam in the Exhaust!
It does not take much coolant in a cylinder to create a lot of steam.
Without pressure in the cooling system, depending on how large the leak, the coolant loss may be small.
Sure sounds like a head gasket leak opened up from the flushing. Or [hopefully not] a crack in a port.
Without pressure in the cooling system, depending on how large the leak, the coolant loss may be small.
Sure sounds like a head gasket leak opened up from the flushing. Or [hopefully not] a crack in a port.
- Wed Sep 29, 2021 9:46 am
- Forum: General Discussion Forum
- Topic: Simmons intake manifold...A or T ?
- Replies: 5
- Views: 1045
Re: Simmons intake manifold...A or T ?
Scott, I think I have the exhaust manifold too.
It has a piece broke off of one of the ports.
I see the carb mounting holes are 90deg from the T manifold....thanks for the link.
It has a piece broke off of one of the ports.
I see the carb mounting holes are 90deg from the T manifold....thanks for the link.
- Tue Sep 28, 2021 8:52 pm
- Forum: General Discussion Forum
- Topic: Simmons intake manifold...A or T ?
- Replies: 5
- Views: 1045
Re: Simmons intake manifold...A or T ?
Thank you !
I think it’s a possibility for a speedster.
I think it’s a possibility for a speedster.
- Tue Sep 28, 2021 8:30 pm
- Forum: General Discussion Forum
- Topic: Simmons intake manifold...A or T ?
- Replies: 5
- Views: 1045
Simmons intake manifold...A or T ?
Found this manifold mixed in with an A heater manifold. It lines up with the ports on a T block.
Looks like a zoom zoom updraft carburetor would fit.
Looks like a zoom zoom updraft carburetor would fit.
- Mon Sep 27, 2021 9:05 am
- Forum: General Discussion Forum
- Topic: LED headlight bulbs
- Replies: 27
- Views: 7479
Re: LED headlight bulbs
Actually they are 1158....1157 has offset tabs.
Try https://www.ledlight.com/searchresult.a ... Words=1158
- Sun Sep 26, 2021 10:37 pm
- Forum: General Discussion Forum
- Topic: MOUNTING HEADLIGHTS ?
- Replies: 8
- Views: 1382
Re: MOUNTING HEADLIGHTS ?
Earlier headlights mount to the fender irons.
If you have 26 fenders, you’ll have to cut a hole in them.
If you have 26 fenders, you’ll have to cut a hole in them.
- Fri Sep 24, 2021 12:12 pm
- Forum: Classifieds - Parts
- Topic: Set of Four Demountable Wheels, Rims and Tires
- Replies: 2
- Views: 1081
Re: Set of Four Demountable Wheels, Rims and Tires
They are not clinchers....definitely a balloon tire rim.
- Fri Sep 24, 2021 11:30 am
- Forum: General Discussion Forum
- Topic: Windshield Stanchions
- Replies: 16
- Views: 2016
Re: Windshield Stanchions
I’m not aware of any difference in a Canadian car.
This is my 24 and a few other posts I have for a slanted windshield.
This is my 24 and a few other posts I have for a slanted windshield.
- Thu Sep 23, 2021 9:22 pm
- Forum: General Discussion Forum
- Topic: Windshield Stanchions
- Replies: 16
- Views: 2016
Re: Windshield Stanchions
It’s too cold to walk out and look, but I don’t think those are the correct stanchions. I don’t remember a 3rd hole in my 24, and they look longer.
The 2 sections of frame should almost meet.
The 2 sections of frame should almost meet.
- Wed Sep 22, 2021 5:42 pm
- Forum: General Discussion Forum
- Topic: Self starter options for a non starter car
- Replies: 43
- Views: 4592
Re: Self starter options for a non starter car
This is some great stuff !! Cousin Phil had asked about possibly a starter/generator setup...seems doable. Maybe a Cub tractor starter with a chain drive or something similar. Not sure a pull start would be much better than a crank with his back issues. I’m gonna forward this stuff to him. Maybe I c...