Search found 1680 matches

by Humblej
Mon Mar 18, 2024 4:03 pm
Forum: General Discussion Forum
Topic: Demounting a tire
Replies: 9
Views: 276

Re: Demounting a tire

Baby powder inside the tire and bead, on the tube, and both sides of the flap, should lube and keep components from bonding together.
by Humblej
Thu Mar 14, 2024 10:05 am
Forum: General Discussion Forum
Topic: Using Coil Box Posts as a Junction Box
Replies: 17
Views: 536

Re: Using Coil Box Posts as a Junction Box

Ford used a junction block on the firewall from about 1919 to the end of production. It makes the wiring clean and organized. The block is located above the steering column on the engine side of the firewall.
20230305_113621[6604].jpg
by Humblej
Wed Mar 13, 2024 9:37 am
Forum: General Discussion Forum
Topic: Need advice on changing tube in clincher wheel
Replies: 4
Views: 221

Re: Need advice on changing tube in clincher wheel

It is a 2.5" Dill metal stem so I will try pulling one side of the tire off first and see if the tube and stem will come out.
by Humblej
Wed Mar 13, 2024 9:19 am
Forum: General Discussion Forum
Topic: Need advice on changing tube in clincher wheel
Replies: 4
Views: 221

Need advice on changing tube in clincher wheel

In all the decades I have owned Model T's, I have never changed a tube in a clincher wheel. I have changed tires many times and always put the partially inflated tube inside the tire and installed the tire/tube as a single component on the clincher rims, but never just changed a tube. Should I just ...
by Humblej
Mon Mar 04, 2024 6:28 pm
Forum: General Discussion Forum
Topic: What are these?
Replies: 2
Views: 396

Re: What are these?

Two of them are sparkplug socket wrenches, the other thing may be a grease gun.
by Humblej
Thu Feb 29, 2024 10:34 pm
Forum: General Discussion Forum
Topic: 27 driving chassis, an I being cheap offering $1500?
Replies: 24
Views: 1059

Re: 27 driving chassis, an I being cheap offering $1500?

That is not a driving chassis, rolling chassis maybe. If when it froze it broke the head and pushed out the core plug it most likely has a cracked water jacket so the block is junk. Was the 2 year old radiator installed when the freeze happened because that may be scrap too. I would walk away from t...
by Humblej
Fri Feb 23, 2024 3:08 pm
Forum: General Discussion Forum
Topic: Vent whatchamacallit
Replies: 4
Views: 385

Re: Vent whatchamacallit

From the Ford Price List of Body Parts Book: Cover (ventilator) assy. part number 17048X. No further breakdown of individual parts within the assembly are shown or called out.
by Humblej
Mon Feb 19, 2024 6:39 pm
Forum: General Discussion Forum
Topic: Bringing home your Model T
Replies: 28
Views: 1734

Re: Bringing home your Model T

Brought this one home in 2021, a happy day!
24rdstr.jpg
Now in running condition.
winter1.jpg
by Humblej
Sat Feb 17, 2024 7:52 am
Forum: Classifieds - Parts
Topic: FS: NOS ‘23-‘27 Touring/Roadster Rear Windows
Replies: 14
Views: 818

Re: FS: NOS ‘23-‘27 Touring/Roadster Rear Windows

Are the frames different sizes or just the 2 window configuration? The 2 window set is for a 23-24 open car only, the 25-27 rear window is a single window and would use a larger frame.
by Humblej
Sat Feb 17, 2024 7:43 am
Forum: General Discussion Forum
Topic: Costs and Profits on Model Ts in 1921
Replies: 3
Views: 333

Re: Costs and Profits on Model Ts in 1921

Great research and writeup. This is why I read the MTFCA Forum. Thanks Trent.
by Humblej
Thu Feb 15, 2024 12:57 pm
Forum: General Discussion Forum
Topic: Tire flaps . . . canvas vs. rubber?
Replies: 17
Views: 707

Re: Tire flaps . . . canvas vs. rubber?

If as you say you have already obtained new rubber flaps, why are you considering using something home made and from non standard material? I have been involved with Model T's for over 50 years and am unaware of canvas tire flaps. Using logic as to what the WWI Red Cross motor pool might have on han...
by Humblej
Sat Feb 10, 2024 8:33 pm
Forum: General Discussion Forum
Topic: Installing 27 muffler
Replies: 17
Views: 762

Re: Installing 27 muffler

Dont waste your time, get the right muffler.
by Humblej
Sat Feb 10, 2024 7:46 pm
Forum: General Discussion Forum
Topic: TT C Cab windshield filler
Replies: 6
Views: 291

Re: TT C Cab windshield filler

The Ford drawing is just for the finished visor, there is no fastener or installation info on the drawing. The visor assembly drawing shows the several pieces and the overall dimensions of the finished part, each piece has its own part number and drawing and conists of the following: 1) the top mate...
by Humblej
Sat Feb 10, 2024 3:26 pm
Forum: General Discussion Forum
Topic: TT C Cab windshield filler
Replies: 6
Views: 291

Re: TT C Cab windshield filler

I have the Ford drawing, it is called Visor Assembly. The finished length is 36 7/8 x 3 1/4 inches. It is made of top material that is folded over a burlap core with binding on the ends. It is attaced to the front roof header on the inside and overlaps the front (outside) of the windshield frame.
by Humblej
Fri Feb 09, 2024 6:59 pm
Forum: General Discussion Forum
Topic: Open trailering poll
Replies: 25
Views: 1005

Re: Open trailering poll

I use a 12 ft dual axle open trailer.
by Humblej
Tue Feb 06, 2024 7:44 am
Forum: Classifieds - Parts
Topic: FS Hardcover Ford Service Manual SOLD
Replies: 2
Views: 263

Re: FS Hardcover Ford Service Manual

Sold to Richard.
by Humblej
Tue Feb 06, 2024 6:57 am
Forum: Classifieds - Parts
Topic: FS Hardcover Ford Service Manual SOLD
Replies: 2
Views: 263

FS Hardcover Ford Service Manual SOLD

For sale, an original hardcover Ford Service Manual, 1926 version, in like new condition. This is slightly larger, the pictures are much clearer, and there are a couple of more pages and figures than the modern paperback reprint. In like new condition, the front and back cover are not stained or fad...
by Humblej
Mon Feb 05, 2024 7:19 pm
Forum: General Discussion Forum
Topic: Rustoleum farm implement paint for block/head/pan?
Replies: 11
Views: 925

Re: Rustoleum farm implement paint for block/head/pan?

I actually use farm paint for my tractor blocks, heads, and pan.
by Humblej
Sun Feb 04, 2024 7:32 am
Forum: General Discussion Forum
Topic: The not so marvelous motor mystery
Replies: 19
Views: 1373

Re: The not so marvelous motor mystery

Stan, Its either gas, spark, or mechanical. Since it has run OK before lets rule out mechanical. Gas and spark should be easy to check with some simple tricks. Gas: 1) If you take the bowl off the carb and turn on the gas does gas run out? 2) If you take the spark plugs out are they dry or wet? Spar...
by Humblej
Sat Feb 03, 2024 8:36 pm
Forum: General Discussion Forum
Topic: Strange hole in wire wheel hub
Replies: 6
Views: 558

Re: Strange hole in wire wheel hub

A lot happens over the course of 100 years with different owners and mechanics making their mods and inflicting abuse, some sort of port for greasing the hub is a good guess. Hard to tell from the picture, is that chipped paint or a hole next to the lug nuts?
by Humblej
Wed Jan 31, 2024 7:16 am
Forum: General Discussion Forum
Topic: Varnish Transfer Decals
Replies: 18
Views: 985

Re: Varnish Transfer Decals

You can make your own water slide decal if you have an inkjet printer. One limitation is the color white since home quality printers do not print white. You can get clear background decal sheet or white background decal sheet at some office supply stores.
decals.jpg
by Humblej
Mon Jan 29, 2024 8:21 pm
Forum: General Discussion Forum
Topic: Ferrules
Replies: 12
Views: 757

Re: Ferrules

A ferrule to splice the fuel line is not the way to go. I would suggest replacing the entire fuel line with one piece of steel automotive brake line and new felt packing at the connections.
by Humblej
Mon Jan 29, 2024 3:22 pm
Forum: General Discussion Forum
Topic: Order of sheet metal assembly. 26/27 radiator.
Replies: 3
Views: 235

Re: Order of sheet metal assembly. 26/27 radiator.

Do you have the Ford Service Manual? Fenders first, then the hood shelves with the hold down handles already installed, then the radiator studs with the lower springs, bar, and cotter pins, then the lower radiator shield, then the upper stud springs and inner thimbles, put a wedge under the studs to...
by Humblej
Sun Jan 28, 2024 7:22 am
Forum: General Discussion Forum
Topic: Timing Light
Replies: 16
Views: 861

Re: Timing Light

No, not useful for a model T.

But for those that do not understand the T ignition system, they will probably buy them like hot cakes and you will be rich beyond your wildest dreams.

Am I responding to a bot?
by Humblej
Sat Jan 20, 2024 10:47 am
Forum: General Discussion Forum
Topic: Demountable rims need latch repair
Replies: 9
Views: 333

Re: Demountable rims need latch repair

Not a difficult repair. Either make new locking lever and use a rivet or braze stud in place, or weld an arm on the broken cam. I do not recommend changing the type of latch and lock mechanism.
by Humblej
Sat Jan 13, 2024 8:15 pm
Forum: General Discussion Forum
Topic: A Loose Crankshaft Front Pulley
Replies: 22
Views: 1051

Re: A Loose Crankshaft Front Pulley

Put a shim between the crank and the pulley. Cut a strip from a coke can and wrap the crank to get a tight fit.
by Humblej
Sat Jan 13, 2024 12:40 pm
Forum: General Discussion Forum
Topic: Dashboard Pocket Watch Holder
Replies: 16
Views: 1043

Re: Dashboard Pocket Watch Holder

Yea, it is a fun book to look thru from time to time. 127 pages, mostly Model T parts, accessories, and tools.
WA book.jpg
by Humblej
Sat Jan 13, 2024 8:08 am
Forum: General Discussion Forum
Topic: Advice needed for touring rear window.
Replies: 10
Views: 395

Re: Advice needed for touring rear window.

This is from the Sears Roebuck catalog from 1927. Whatever type of repair you decide to do it will probably be a 2 man job.
window.jpg
by Humblej
Sat Jan 13, 2024 7:44 am
Forum: General Discussion Forum
Topic: Dashboard Pocket Watch Holder
Replies: 16
Views: 1043

Re: Dashboard Pocket Watch Holder

That clock was not a Ford product and was never installed on a Model T at the Ford factory. But what Ford did not provide as either original equipment or as an authorized accessory was big business by other suppliers and sold thru places like Sears and Roebuck, Western Auto, etc. It will certainly f...
by Humblej
Fri Jan 12, 2024 10:29 am
Forum: General Discussion Forum
Topic: Installing neoprene inner seals question
Replies: 13
Views: 510

Re: Installing neoprene inner seals question

Another method to protect the seal from being cut from the sharp edge of the axle keyway is to put a very small screwdriver in the keyway and pry the lip of the seal away from the keyway as you slide the seal on.
by Humblej
Fri Jan 12, 2024 7:39 am
Forum: General Discussion Forum
Topic: Advice needed for touring rear window.
Replies: 10
Views: 395

Re: Advice needed for touring rear window.

I agree with Erik. This is my original 1924, the rear plastic windows had been replaced sometime in its life with accessory glass windows. In my case the rear window outlasted the top. The metal frames with glass are available NOS at many swap meets, Ebay, etc., and come in different sizes for the v...
by Humblej
Thu Jan 11, 2024 5:20 pm
Forum: General Discussion Forum
Topic: 1926 Tudor upper door seals
Replies: 5
Views: 298

Re: 1926 Tudor upper door seals

No seal is used at the top of the door, also there is no welting at the top of the door.
by Humblej
Thu Jan 11, 2024 2:57 pm
Forum: General Discussion Forum
Topic: Wanted: Ideas for side curtians for 1922 2 man top
Replies: 14
Views: 522

Re: Wanted: Ideas for side curtians for 1922 2 man top

Driving around in an open car with the top up makes me a bit claustrophobic to begin with, side curtains must be like getting an MRI. The attached picture is a NOS set of 17-22 touring side curtains. The windows are way too small for my liking, OK for the driver curtain, but forget about seeing anyt...
by Humblej
Wed Jan 10, 2024 3:36 pm
Forum: General Discussion Forum
Topic: Firewall thickness
Replies: 6
Views: 433

Re: Firewall thickness

The Ford factory drawing I have dated 12/8/17 has a thickness shown of .677"-.697"
by Humblej
Tue Jan 09, 2024 4:35 pm
Forum: General Discussion Forum
Topic: Red split rims
Replies: 3
Views: 387

Re: Red split rims

Demountable rim wooden spoke wheels only came painted black from the factory. 21" wood spoke wheels were available as an option from the dealer in natural finish. Rims were zinc plated or galvanized depending on manufacturer.
by Humblej
Sun Jan 07, 2024 7:50 am
Forum: General Discussion Forum
Topic: Top bows...
Replies: 9
Views: 612

Re: Top bows...

I will give a different answer. None of the bows are correct for a 1924 runabout. Set on the right are some of the pieces for a touring top.
by Humblej
Fri Jan 05, 2024 7:38 am
Forum: General Discussion Forum
Topic: Need Help with My Head Lights
Replies: 14
Views: 550

Re: Need Help with My Head Lights

Bruce, As others have already advised, it is most likely a grounding issue. Without tearing anything apart, I would start with a test light at the terminal block on the firewall. If the test light shows power for bright, dim, and tail it will confirm the switch is good and the wiring to that point i...
by Humblej
Thu Jan 04, 2024 12:04 pm
Forum: General Discussion Forum
Topic: '27 floorboard question
Replies: 8
Views: 359

Re: '27 floorboard question

Those hold the carpet.
by Humblej
Wed Jan 03, 2024 10:19 am
Forum: General Discussion Forum
Topic: Headlight rim tool
Replies: 3
Views: 334

Re: Headlight rim tool

This is from the Ford Service Bulletins. Volume 2, No. 4, page 27
headlightrimtool.jpg
by Humblej
Wed Jan 03, 2024 9:37 am
Forum: General Discussion Forum
Topic: Early garage kits
Replies: 7
Views: 868

Re: Early garage kits

Here are some pictures form a mid 1920's kit home catalog.
garagekit1.jpg
garagekit2.jpg
by Humblej
Wed Jan 03, 2024 8:01 am
Forum: General Discussion Forum
Topic: A shed for my T
Replies: 25
Views: 1272

Re: A shed for my T

This should give you an idea of a minimum size. From the Ford Service Bulletins, Feb 1920.
garage.jpg
by Humblej
Fri Dec 29, 2023 3:52 pm
Forum: General Discussion Forum
Topic: Solid rubber tires & felloes
Replies: 13
Views: 884

Re: Solid rubber tires & felloes

Yes wheels can be rebuilt and new solid tires installed, but, its gonna be expensive, and solid tires are going to be a rough ride. Might save you a considerable sum and have better ride quality replacing with TT demountable rims and wheels.
by Humblej
Fri Dec 29, 2023 7:35 am
Forum: General Discussion Forum
Topic: washer between rear wheel hub and axle shaft nut?
Replies: 18
Views: 852

Re: washer between rear wheel hub and axle shaft nut?

Yes you correctly identified what is going on. If the hub is tight on the axle and there is no rubbing on the inside of the hub or brake drum you are fine, there is no problem to be concerned about.
by Humblej
Fri Dec 29, 2023 7:25 am
Forum: General Discussion Forum
Topic: What is a 1916 horn button worth?
Replies: 2
Views: 340

Re: What is a 1916 horn button worth?

In nice condition I would think $35-$50.
by Humblej
Sun Dec 24, 2023 6:47 am
Forum: General Discussion Forum
Topic: Bendix Clatter
Replies: 11
Views: 538

Re: Bendix Clatter

Andrew, A clattering noise at the bendix is not normal. One thing you can do to further troubleshoot is to remove the bendix cover and run the starter and see what is happening. Do not run the engine with the bendix cover off as it will gush oil, but you can run the starter for 10-15 seconds. Also l...
by Humblej
Fri Dec 22, 2023 1:05 pm
Forum: General Discussion Forum
Topic: What Oil Should I Use in My Fip Top Oilers?
Replies: 16
Views: 861

Re: What Oil Should I Use in My Fip Top Oilers?

Any engine oil will do.
by Humblej
Tue Dec 19, 2023 9:12 am
Forum: General Discussion Forum
Topic: T tires
Replies: 9
Views: 946

Re: T tires

Welcome back Steve! Nice to see your large print again. You have been missed.
by Humblej
Mon Dec 18, 2023 1:53 pm
Forum: General Discussion Forum
Topic: Bearing damage
Replies: 6
Views: 624

Re: Bearing damage

Is it made in China or USA? If it is China I would use it until I could find a good used or new USA bearing and replace it.
by Humblej
Sat Dec 16, 2023 8:22 pm
Forum: Classifieds - Parts
Topic: WTB TT express bed tire spare tire carrier
Replies: 6
Views: 316

Re: WTB TT express bed tire spare tire carrier

That is not for a TT, it looks like a modified AA bracket.
by Humblej
Sat Dec 16, 2023 5:32 pm
Forum: General Discussion Forum
Topic: T tires
Replies: 9
Views: 946

Re: T tires

It has been a thing since at least September, I was unable to order any 30x3.5 driver tires or tubes. And don't be surprised that when they do become available they will cost more.
by Humblej
Fri Dec 15, 2023 10:12 am
Forum: General Discussion Forum
Topic: Re: Ignition Timing Problems.
Replies: 12
Views: 579

Re: Ignition Timing Problems.

John, If I understand your original post, sometimes when you turn the key on to start the engine there is no coil buzz so you move the spark lever until it buzzes, and is that an indication of a problem. A coil should buzz only when the engine is in the ignition portion of the power stroke. So, if y...
by Humblej
Thu Dec 14, 2023 7:10 am
Forum: General Discussion Forum
Topic: Headlight rims
Replies: 8
Views: 688

Re: Headlight rims

Yes it is a problem to remove a headlight rim. In theory you push in and rotate and they are off, realistically it takes 4 hands, one to push and rotate at each rivet. I have had success with a helper so we have 4 hands pushing and turning. The Ford Service Bulletins have a drawing to make a tool th...
by Humblej
Fri Dec 08, 2023 7:31 pm
Forum: General Discussion Forum
Topic: Blockley Tire import question.
Replies: 31
Views: 1614

Re: Blockley Tire import question.

Morgan, A few older posts about ordering Blockley tires over the last couple of years if you can find them. I will let someone answer who has done it, since I haven't. I will say that for 21" tires, USA made Firestone tires are excellent. I purchased mine directly from Coker Tire. I did have a probl...
by Humblej
Fri Dec 08, 2023 10:09 am
Forum: General Discussion Forum
Topic: Torpedo
Replies: 11
Views: 943

Re: Torpedo

It is a beauty.
by Humblej
Wed Dec 06, 2023 7:28 am
Forum: Classifieds - Vehicles
Topic: 1927 Four Door For Sale ***SOLD***
Replies: 13
Views: 2694

Re: 1927 Four Door For Sale New Price

Ye Gads! Just the wire wheels, bumpers, and Ruckstell are worth more than that!
by Humblej
Wed Dec 06, 2023 7:14 am
Forum: General Discussion Forum
Topic: 26 Touring front top bow
Replies: 3
Views: 295

Re: 26 Touring front top bow

David, Yes there is a drawing with dimensions and you can get it from the Benson Ford Research Center located at the Henry Ford in Dearborn. You will need the factory part number and it will cost you a little. You can go there in person and see it and copy it for free. I do not know about the front ...
by Humblej
Wed Dec 06, 2023 7:04 am
Forum: General Discussion Forum
Topic: Generator Issues
Replies: 12
Views: 582

Re: Generator Issues

Don,
Ron has offered to help you with your charging problem and provided a number for you to call. I suggest you call him and talk directly with him rather than continue to post here that your generator will not charge.
by Humblej
Tue Dec 05, 2023 12:55 pm
Forum: General Discussion Forum
Topic: Windshield Hardware (‘24)
Replies: 4
Views: 270

Re: Windshield Hardeware (‘24)

Miles,
That is a hook for the side curtain. That little screw is not robust enough to support a mirior in my opinion. I would suggest a clamp-on side mirror.
by Humblej
Tue Dec 05, 2023 11:38 am
Forum: General Discussion Forum
Topic: What Have You Done to Your Model T in December
Replies: 22
Views: 1861

Re: What Have You Done to Your Model T in December

Rims zinc plated and new tires installed.
newtires.jpg
Nice day for a photo op. My freshly shod 1924 Runabout.
winter1.jpg
by Humblej
Sun Dec 03, 2023 3:44 pm
Forum: General Discussion Forum
Topic: If you could ask Henry a question ...
Replies: 40
Views: 1885

Re: If you could ask Henry a question ...

Really, you have a chance to talk to someone that has been dead for 75 years and all you can think of is Model T questions? I would ask if it is hot where you are and have you seen any of my friends and family?
by Humblej
Sun Dec 03, 2023 10:19 am
Forum: General Discussion Forum
Topic: 1926 split rim valve position
Replies: 3
Views: 251

Re: 1926 split rim valve position

Perhaps to keep an eye on the stem as the rim expands or to prevent someone from shrinking the rim too far.

The rim should only be overlapped a little, the joiner should not go as far as the stem. You still need to coax the tire on the rim with a couple of tire irons.
by Humblej
Sat Dec 02, 2023 4:09 pm
Forum: Classifieds - Parts
Topic: F.S. Ford Service Manual Hardbound 1926
Replies: 2
Views: 248

Re: F.S. Ford Service Manual Hardbound 1926

Sold to Miles of the Northern Michigan T's chapter of MTFCI.
by Humblej
Sat Dec 02, 2023 2:08 pm
Forum: Classifieds - Parts
Topic: F.S. Ford Service Manual Hardbound 1926
Replies: 2
Views: 248

F.S. Ford Service Manual Hardbound 1926

For Sale: Original Ford Hardbound Service Manual in very nice condition. This is much better than the modern reprint, slightly larger with larger print and clearer pictures. Copyright 1926. $75 plus actual USPS postage.
man1.jpg
man2.jpg
man3.jpg
by Humblej
Sat Dec 02, 2023 10:08 am
Forum: General Discussion Forum
Topic: Wheel Rims Plated
Replies: 4
Views: 442

Re: Wheel Rims Plated

No he does not provide that service. I sandblased them myself first, then low pressure bead blasted to smooth it out some, and sprayed with WD40 to keep them from re-rusting.
by Humblej
Sat Dec 02, 2023 3:53 am
Forum: General Discussion Forum
Topic: Wheel Rims Plated
Replies: 4
Views: 442

Wheel Rims Plated

I picked up my rims from the plater recently and was very pleased with the results. I am usually underwhelmed by some of the businesses that will take on a small job like model T parts, do it in a reasonable time and for a reasonable price. Gone are so many of the small businesses like radiator shop...
by Humblej
Wed Nov 29, 2023 3:46 pm
Forum: General Discussion Forum
Topic: Steve Jelf Gofundme, Model T Project
Replies: 6
Views: 1179

Re: Steve Jelf Gofundme, Model T Project

I agree, best to wait and check with Steve. He was a regular poster on this forum, the fact that he is not posting since the accident should mean he has other priorities right now.
by Humblej
Mon Nov 27, 2023 7:06 pm
Forum: General Discussion Forum
Topic: 21 inch tires
Replies: 7
Views: 422

Re: 21 inch tires

Not a problem, sounds like you have Firestone tires.
by Humblej
Mon Nov 27, 2023 8:17 am
Forum: General Discussion Forum
Topic: Fan pulley rebuild
Replies: 17
Views: 951

Re: Fan pulley rebuild

Tim, A little slop in your fan shaft and bushings may be OK, and as others have stated, too tight a fit is a problem, so you may or may not have an overly worn fan hub. Your issues appear to be self inflicted, your fan belt looks too long which is positioning your fan pulley and belt too close to th...
by Humblej
Mon Nov 27, 2023 8:02 am
Forum: General Discussion Forum
Topic: Radiator Hose Options?
Replies: 20
Views: 972

Re: Radiator Hose Options?

I recently installed new hoses on my 26 and 24 with what Langs carries for T's and did not find them too short or even a little short.
by Humblej
Fri Nov 24, 2023 8:59 am
Forum: Classifieds - Parts
Topic: WTB, 26-27 Bumpers and Front axle perches.
Replies: 5
Views: 310

Re: WTB, 26-27 Bumpers and Front axle perches.

Brian, If the bumpers are for your runabout you should know the Ford rear bumpers use different brackets for different body styles. The runabout and coupe have the spare tire angled forward so sticks out farther away near the bottom, so uses a longer bumper bracket to clear the spare. The split rear...
by Humblej
Thu Nov 23, 2023 12:02 pm
Forum: General Discussion Forum
Topic: Reproduction Schrader 777 tire valve
Replies: 6
Views: 357

Re: Reproduction Schrader 777 tire valve

I am in too, 5 for me.
by Humblej
Mon Nov 20, 2023 4:32 pm
Forum: General Discussion Forum
Topic: Wheel vs rim questions
Replies: 11
Views: 701

Re: Wheel vs rim questions

All 21" rims for Fords are interchangeable regardless of manufacturer.
by Humblej
Sun Nov 19, 2023 4:51 pm
Forum: General Discussion Forum
Topic: How to install seatbelts on an all wood body
Replies: 30
Views: 1307

Re: How to install seatbelts on an all wood body

You didnt mention it is a towncar. The lady should be riding in the back.
by Humblej
Sun Nov 19, 2023 11:55 am
Forum: General Discussion Forum
Topic: How to install seatbelts on an all wood body
Replies: 30
Views: 1307

Re: How to install seatbelts on an all wood body

You could reinstall the front doors.
by Humblej
Sun Nov 19, 2023 11:22 am
Forum: General Discussion Forum
Topic: Firewall hole
Replies: 7
Views: 479

Re: Firewall hole

This is my unrestored 1924 runabout, it has the same unused hole.
carbstove.jpg
by Humblej
Sat Nov 18, 2023 10:16 pm
Forum: General Discussion Forum
Topic: Question Regarding Reverse
Replies: 3
Views: 342

Re: Question Regarding Reverse

Adjust the reverse band so that when you push on the pedal with your hand it bottoms out about even with the brake and clutch pedal. If you can push it farther it is too loose and if you cant push it as far as the brake and clutch it is too tight. That will put you in the ball park.
by Humblej
Sat Nov 18, 2023 9:49 am
Forum: General Discussion Forum
Topic: Front spring lowering brackets.
Replies: 7
Views: 490

Re: Front spring lowering brackets.

Joe are you looking for some lowering brackets?
by Humblej
Fri Nov 17, 2023 4:20 pm
Forum: General Discussion Forum
Topic: 27 Tudor hidem end caps or not
Replies: 3
Views: 297

Re: 27 Tudor hidem end caps or not

If you need an end cap use a square end black cap. The rain gutters are needed to get the right look and functional too.
top.jpg
by Humblej
Thu Nov 16, 2023 7:00 am
Forum: General Discussion Forum
Topic: What did you do to your Model T in November?
Replies: 52
Views: 3495

Re: What did you do to your Model T in November?

Ryan,
I like it. What will be your shipping method for that box?
by Humblej
Wed Nov 15, 2023 12:04 pm
Forum: General Discussion Forum
Topic: A look at an original tool bag and tools
Replies: 11
Views: 993

Re: A look at an original tool bag and tools

Randy,
That is not a Ford tool bag.
by Humblej
Tue Nov 14, 2023 12:54 pm
Forum: Classifieds - Parts
Topic: F.S Stevens Tool Reamer SOLD
Replies: 5
Views: 677

Re: F.S Stevens Tool Reamer

Sold to Scott
by Humblej
Tue Nov 14, 2023 9:01 am
Forum: Classifieds - Parts
Topic: F.S Stevens Tool Reamer SOLD
Replies: 5
Views: 677

Re: F.S Stevens Spindle Reamer REDUCED

Price reduced to $75 plus $10.20 flat rate postage
by Humblej
Tue Nov 14, 2023 8:33 am
Forum: General Discussion Forum
Topic: A look at an original tool bag and tools
Replies: 11
Views: 993

Re: A look at an original tool bag and tools

That is great, thanks for posting.
by Humblej
Tue Nov 14, 2023 8:20 am
Forum: General Discussion Forum
Topic: Factory data about Model T
Replies: 3
Views: 264

Re: Factory data about Model T

No, you will not find any sales or delivery documentation for January 1924. There were 9 million model T's sold by then, that's a lot of records to keep.
by Humblej
Mon Nov 13, 2023 7:55 pm
Forum: Classifieds - Parts
Topic: Express bed spare tire mount
Replies: 4
Views: 487

Re: Express bed spare tire mount

I bet if you measure the diameter of the 3 stud pattern you will find it fits a model AA wheel.
by Humblej
Mon Nov 13, 2023 10:27 am
Forum: Classifieds - Parts
Topic: F.S Stevens Tool Reamer SOLD
Replies: 5
Views: 677

Re: F.S Stevens Spindle Reamer REDUCED

back to the top
by Humblej
Sun Nov 12, 2023 3:38 pm
Forum: Classifieds - Parts
Topic: F.S Stevens Tool Reamer SOLD
Replies: 5
Views: 677

F.S Stevens Tool Reamer SOLD

For Sale: Stevens no. 2713-14 Duplex Spindle Body Bushing. This is a reamer for the front axle spindle kingpin bushings and the tie rod bushing. The Stevens reamer number corresponds to the Ford part number for the spindle bushing and the tie rod bushing. Nice usable condition, sharp, no rust, but n...
by Humblej
Fri Nov 10, 2023 4:47 pm
Forum: General Discussion Forum
Topic: 12v battery for 6V equipment
Replies: 11
Views: 597

Re: 12v battery for 6V equipment

You are going to ruin your starter and bendix using a 12v battery. Best to replace with a 6v battery.
by Humblej
Fri Nov 10, 2023 1:18 pm
Forum: Classifieds - Parts
Topic: F.S. Ford Service Manual Hardbound 1926 SOLD
Replies: 2
Views: 214

Re: F.S. Ford Service Manual Hardbound 1926

Sold to Bill pending payment.
by Humblej
Fri Nov 10, 2023 12:47 pm
Forum: Classifieds - Parts
Topic: F.S. Ford Service Manual Hardbound 1926 SOLD
Replies: 2
Views: 214

F.S. Ford Service Manual Hardbound 1926 SOLD

For Sale: Original Ford hard cover Service Manual copyright 1926. This is the original version of the Model T Service Manual, better than the modern reprint, its bigger so the printing and pictures are bigger and the pictures are much clearer. Binding and cover are good, all pages are intact. Looks ...
by Humblej
Thu Nov 09, 2023 7:13 pm
Forum: Classifieds - Parts
Topic: F.S. Stevens T-80 U-Joint Tongs SOLD
Replies: 3
Views: 403

Re: F.S. Stevens T-80 U-Joint Tongs

Sold to Ben pending payment. Wow, that was fast.
by Humblej
Thu Nov 09, 2023 7:02 pm
Forum: Classifieds - Parts
Topic: F.S. Stevens T-80 U-Joint Tongs SOLD
Replies: 3
Views: 403

F.S. Stevens T-80 U-Joint Tongs SOLD

For Sale: Stevens T-80 universal joint tongs. Essential tool to align and inset the u joint into the transmission. Don't try to install an engine or a rear end without one, a real time saver, curse saver, and finger saver. $175 plus postage.
stevens1.jpg
stevens2.jpg
stevens3.jpg
by Humblej
Wed Nov 08, 2023 7:04 am
Forum: Classifieds - Vehicles
Topic: Wanted to Buy, 1917 Coupelet or 1918 Coupe ONLY!!!
Replies: 125
Views: 33010

Re: Wanted to Buy, 1917 Coupelet or 1918 Coupe ONLY!!!

Really, this is still going? Please stop beating that dead horse, Walt the OP has not been responding to this thread since May 2023!
by Humblej
Wed Nov 08, 2023 6:50 am
Forum: General Discussion Forum
Topic: Coil box amperage ?
Replies: 6
Views: 348

Re: Coil box amperage ?

1.3 amps per coil if it is adjusted correctly.
by Humblej
Tue Nov 07, 2023 10:05 pm
Forum: General Discussion Forum
Topic: Odd spark
Replies: 11
Views: 469

Re: Odd spark

The easy way to check if the ammeter is causing the arching is to take the ignition panel off the dash and let it hang by the wire harness so it does not touch metal. Use a test light from the ignition switch metal panel to the metal dash and see if you have a stray voltage. A bad ammeter insulator ...
by Humblej
Tue Nov 07, 2023 8:06 pm
Forum: General Discussion Forum
Topic: Odd spark
Replies: 11
Views: 469

Re: Odd spark

I had the exact same problem, thought it was the coil box too. Turned out to be the ammeter. The insulators for the ammeter were left off by mistake and it was causing arching at the carb adjustment rod. Found it unexpectedly when the ignition switch panel was removed from the dash for an unrelated ...
by Humblej
Tue Nov 07, 2023 7:23 pm
Forum: Classifieds - Parts
Topic: For Sale 26-27 Wire Wheels and Hubs
Replies: 4
Views: 1103

Re: For Sale 26-27 Wire Wheels and Hubs

Back to the top
by Humblej
Tue Nov 07, 2023 7:22 pm
Forum: Classifieds - Parts
Topic: For Sale 1926 Pickup Bed
Replies: 4
Views: 1094

Re: For Sale 1926 Pickup Bed

Back to the top