MTFCA Forum

Guy, Does your clincher rim reverse to allow you to use straight side tires? I have a set of 5 nearly new Lester 34x4 white walls...

Frank

Guy's, Is there a Kevlar band supplier out there that you would recommend? I don't know what brand Lang's offers, but they are out of stock on them. Is there a good, better or best ranking with these or are they mostly the same? Steve, It is my opinion that not all bands are created equal, but then...

I can't say for sure, but after the 50 or so sets that I have in inventory, I'll no longer supply bands. My USA supplier makes me buy 5000 feet of material, since my specs are different from what he normally weaves. He has to re-calibrate the machines just for me. I no longer own Model T's and due t...

I have been supplying woven kevlar transmission bands since the early 80's, but have recently removed my ad from the Vintage Ford. Return on investment was getting lower and lower. Since the passing of my Brother, I have just about stopped supplying bands, but have about 50 sets left in inventory. W...

Bringing to Rhinebeck this weekend... $400 Pair

I have a shortened shaft, but don't know why it was shortened. I can measure the length...

Frank

Yes, still available...

How many do you need? I have several. $5 each

Frank

If you decide to change to 23" wheels, I have a pair of rears complete with brake drums and rims. PM me.

Frank

Brand new, never used complete Rajo head kit from Chafins. Also a couple of extra head gaskets for same. Will be at Hershey spot C4Y36. NO VENMO, NO PAYPAL, CHECK OR PO MONEY ORDER ONLY. TOO MANY SCAMMERS!

Never used TT rear axle found in an old Ford dealershiip for sale. $100 plus shipping. Can deliver to Hershey, if interested. NO VENMO, NO PAYPAL, CHECK OR PO MONEY ORDER ONLY. TOO MANY SCAMMERS!

I'll be bringing two EXTREMELY good 23" TT rear wheels with drums and rims to Hershey next month. $300 for each wheel/rim set. clamps are separate. Spot: C4Y36.

sent an email....

Scot, got your message. Text me your address and I will send it to you...

Frank

I have 7 petcocks for the Model T carburetor for sale. $15 each plus shipping. Can put them in a padded envelope to minimize shipping. 518-755-0986

09-11: Used passenger's side with a repair near the carburetor hole: $60
12-14:Used passenger's side: $75
19-27: Used driver's side: $50
19-27: Pair used, very good: $100
19-27: Pair, appear unused, don't think they are repro, excellent: $150

all plus shipping from zip 12534 or call 518-755-0986

23" rear wheels w/brake drums: $250 each, Excellent condition. 23" rims for rear wheels: 1 pair excellent: $150 each, 1 pair good: $100 each. TT Low speed worm shaft complete with bearings and sleeves: $300. Can deilver to Hershey. Frank Iaccino 518-755-0986.

Might be a HAL conversion without the rocker cover.

Frank

Grntea wrote: ↑
Sun Feb 19, 2023 1:48 pm
I’m wanting a new one also if someone has one they can part with!!

email sent...

I have a used one available downstairs rolled in a tube. I'll check the condition and post a photo...

Frank

No problem, if you change your mind, they will be here...

I just realized you are looking for rear mounts. These are fronts....

Not wanting to horn in, but if ken doesn't have what you need, I may. see photos. Two sets, one may be older style and has a repair.

Frank

photos attached

OK, photos attached. the pair toward the bottom of the photos are in better shape, but one has a non-Ford threaded clevis. $20 either pair plus shipping. I'll get a quote...

Frank

Not sure what the length is that you need, but I have several to choose from. if interested, let me know... need lengths...

Frank

The thread on those appears to be straight. If they measure approximately 1/2", they are most likely 14 mm. The threads will cross and not provide a proper seal....

Frank

Those particular plugs do not have 1/2" pipe thread. If you found bethlehem plugs with pipe thread, there is no reason the wouldn't work.

Frank

So sorry to hear... just saw Don on Saturday. She was a real peach... I will miss her.

Frank

The email I sent merely stated that installation on his steel bands was available at $10 per band. As far as comparing material, I believe Nev-R-Wear to be a superior product to that which is imported from England. I had that product forced on me from a previous supplier and rejected it. My Nev-R-We...

Sent you an email...

I may need a 24 sedan transported to Luray from Upstate NY (repeat, MAY). Just getting my ducks in a row. If anyone is going to Luray and is able to transport a 24 sedan, please let me know....

Frank

I'll get some photos today and place an ad in 'cars for sale.' I'm in the middle of getting it all together, so this is not plug and play...

Frank

Does it need to have 4 doors? I have a 1924 tudor that I have been getting ready to sell, I can get photos tomorrow...

Frank

Try fordbarn.com.... good site for Model A's and flatheads...

Frank

That is an updraft and has the wrong mounting for your Fronty. You should be looking for a side draft carburetor similsr to this: https://www.ebay.com/itm/STROMBERG-OS-2-BRASS-Carburetor-Model-T-Ford-Original-Air-Intake-Fuel-Delivery/264383245830?hash=item3d8e782e06:g:stsAAOSw6pxdBGRk&vxp=mtr If you...

When I had my Fronty, I ran a Stromberg MB1 carburetor. It's a side draft that was also used on a Stude light six. Good strong carburetor that will supply all the gas you'll need. You can find them on ebay and the price is usually pretty good...

Frank

Rootlieb used to offer the 'eye brow' as a stand alone part years ago, maybe it's still available...

Frank

Good News! I just spoke with Steve at Lang's. They have 4 used corkscrew style regulators for me... Of course, the gear boxes are worthless, since they are pot metal. However, I got the last 4 repro gear boxes in existence. The gods have smiled on me today...

Frank

Thanks for the info, so far. As far as the cork screw window regulators, I may have to use the later style, since the ones I need are made of unobtanium...

Frank

Rich, thanks, that is what I needed. What is the source of the photos with the arrows? Do they point to item descriptions? Your doors have what I would call a minimum necessary gap. Mine has over 1/2" of space. Would the 26-27 rain gutter work for that space? It's the only one I see available in Lan...

John, thanks for the photo. So, do you have a rain gutter above the door? Does the hidem go right to the bottom of the wood that forms the top? A photo of the area just above the door would really help. Thanks.

Frank

I am currently trying to fix up a 24 Tudor that needs everything pertaining to windows, both in the door and in the rear. It needs felts, bottom channels, rubber window seals, etc. There is a 1/2" gap just above the doors between the top of the door and the bottom of the roof wood that should not be...

Looking for the 4 pieces of window moldings for a 1924 Tudor passenger side. All four or just one at a time... Thanks
518-755-0986

I had three cranks (1 was EE) magnafluxed and polished at an engine shop here at a cost of $150 each. All 3 passed with flying colors, all were .010 under for mains, and .020 for rods. I still have 2 that no one seems interested in at a price of $200. There was a post a short time ago where someone ...

TonyB wrote: ↑
Fri Sep 25, 2020 1:45 am

Has anyone real first hand experience of finding an original Ford crank that has shown no cracks after magnafluxing.

Read my post above...

You gotta wonder if the poor guy who owned it stalled it on the tracks and had enough time to jump, let alone get out and crank start it... Dang, it was probably brand new...

Frank

I just re-read the post, tornado, not train...

I'm not sure where you are in W Virginia, but I'm going to be set up in Carlisle next week in spot D33-35 and I can bring two used crank shafts for you to look at. They both have been magnafluxed and polished on a crank machine (not ground, polished). The both have standard mains and .010 under rod ...

I normally don't get involved with the forum, since I am quite biased toward Kevlar. I and my brother, John have been making bands made of Kevlar fibers since around 1982 or so and sell them under the Nev-R-Wear name. Part of the story above is true, the original weaver of the material that we used ...

Search found 49 matches