Search found 539 matches

by Ron Patterson
Mon Apr 15, 2024 4:54 pm
Forum: General Discussion Forum
Topic: How many volts output from generator?
Replies: 13
Views: 614

Re: How many volts output from generator?

Josh Your original post indicates the cutout is not closing providing the mandatory load for any third brush generator. The generator is doing what third brush generators does when running without a load, going beserk impressing excessive voltage on the armature and field windings (a race to see whi...
by Ron Patterson
Mon Apr 15, 2024 10:01 am
Forum: General Discussion Forum
Topic: How many volts output from generator?
Replies: 13
Views: 614

Re: How many volts output from generator?

Sounds to me like your cutout is not working i.e. not connecting the generator to the battery.
Ron Patterson
by Ron Patterson
Sat Apr 13, 2024 5:15 pm
Forum: Classifieds - Parts
Topic: Wanted to Buy Model T Ford Ignition Coils
Replies: 0
Views: 158

Wanted to Buy Model T Ford Ignition Coils

Looking to buy stashes of used and rebuildable Model T Ford ignition coils. Turn your used coils into cash. Prefer greater than 25 coils but will also consider smaller quantities. I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. Th...
by Ron Patterson
Sat Apr 13, 2024 4:49 pm
Forum: General Discussion Forum
Topic: What is this?
Replies: 10
Views: 751

Re: What is this?

That is an accessory starting motor for a Model T.
by Ron Patterson
Sun Apr 07, 2024 6:56 pm
Forum: General Discussion Forum
Topic: Exhaust Nut Thread Size
Replies: 13
Views: 732

Re: Exhaust Nut Thread Size

Jerry
That is a great eBay price on the 1 7/8 X 16 Die.
But check cost of the Stock before buying.
Ron Patterson
by Ron Patterson
Sun Apr 07, 2024 4:11 pm
Forum: General Discussion Forum
Topic: Coil rebuil capacitor fit question
Replies: 10
Views: 585

Re: Coil rebuil capacitor fit question

Coil Resistance Readings 001.jpg This assumes you have the 418P47494 type capacitors and a Ford manufactured coil. There are two ways to install them: one is to remove the glass separator to make room for the cacpacitor OR; if you prefer, remove the glass separator AND the two wooden blocks between...
by Ron Patterson
Wed Mar 27, 2024 7:39 pm
Forum: General Discussion Forum
Topic: Holley G Rebuild
Replies: 10
Views: 443

Re: Holley G Rebuild

I can vouch for Cory Walker. I had a Holly G rebuilt by another purported expert and it simply would not work correctly. I sent it to Corey dedscribing the trouble and in short order he found the problem and corrected it. Corey understands how the Holly G carb works and has the test apparatus to dia...
by Ron Patterson
Wed Mar 27, 2024 6:48 pm
Forum: General Discussion Forum
Topic: Capacitor
Replies: 21
Views: 1399

Re: Capacitor

I agree with Adam. This response assumes appropriate capacitor testing technique was used. The problem described sounds alot like metalized Mylar capacitors were used in the coil rebuild. Some coil rebuilders like them because they are easy to install, but they don't last long. May be a classic case...
by Ron Patterson
Mon Mar 25, 2024 1:36 pm
Forum: General Discussion Forum
Topic: Capacitors
Replies: 3
Views: 496

Re: Capacitors

Dennis Various capacitors types cited above by Frank are designed for specific circuit electrical charteristics. Costa are all over the map. As Chris points out above the critical Dv/Dt specification (rate of change of voltage/rate of change in time, expressed in volts per micro seconds) is the key ...
by Ron Patterson
Mon Mar 18, 2024 6:15 pm
Forum: General Discussion Forum
Topic: Steve Jelf is home safe and sound
Replies: 53
Views: 5274

Re: Steve Jelf is home safe and sound

Steve
If you need any help fixin the ignition coils you abused (grin) let me know?
Ron Patterson
by Ron Patterson
Thu Mar 14, 2024 11:17 am
Forum: Classifieds - Parts
Topic: Capacitors for Model T Ford Ignition Coils?
Replies: 4
Views: 709

Capacitors for Model T Ford Ignition Coils?

For Sale, replacement capacitors for Model T Ford ignition Coil rebuilding. These are excess to my needs. Type 418P Orange Drop, Round Profile, Polyester Film-Foil capacitors. Capacitance .47 uF, 400v, dV/dt rating of 700 volts/uS. I have installed over 25,000 of these capacitors over the years with...
by Ron Patterson
Tue Mar 05, 2024 3:17 pm
Forum: General Discussion Forum
Topic: Russ Potters Passing and Arrangements
Replies: 36
Views: 2407

Re: Russ Potter

My condolences to Mary and the Potter family.
Ron Patterson
by Ron Patterson
Fri Feb 23, 2024 6:14 pm
Forum: General Discussion Forum
Topic: Coi Tar
Replies: 7
Views: 625

Re: Coi Tar

Here is a photo.
by Ron Patterson
Fri Feb 23, 2024 6:07 pm
Forum: General Discussion Forum
Topic: Coi Tar
Replies: 7
Views: 625

Re: Coi Tar

When you contact roofing contractors looking for coil rebuilding tar specifically ask for Type III Steep roofing asphalt.
Ron Patterson
by Ron Patterson
Sun Feb 18, 2024 10:58 am
Forum: General Discussion Forum
Topic: Slow starter
Replies: 45
Views: 2199

Re: Slow starter

I won't comment further on the points Jeff and Dave have made except to say they are exactly correct. I would like to address the Brushcap Babbitt bushing problems depicted above which is one of the 7 or 8 discrete failures that must be addressed to rebuild (as opposed taking it apart and putting it...
by Ron Patterson
Sat Feb 17, 2024 12:18 pm
Forum: General Discussion Forum
Topic: Reverse Rotation Starter
Replies: 9
Views: 784

Re: Reverse Rotation Starter

Both Model A and T starters are series/parallel wound DC motors and will only spin clockwise (as viewed from the Bendix drive end) regardless of the polarity of applied voltage. If one turns counter clockwise there has been some serious modifications done inside. I think the AACA fellow has mistaken...
by Ron Patterson
Sat Feb 17, 2024 12:08 pm
Forum: General Discussion Forum
Topic: Slow starter
Replies: 45
Views: 2199

Re: Slow starter

The problem with starter repair is that they usually have a combination of faults with the bushings, armature, brush cap, brushplate, field windings and Bendix drive. Some rebuilding steps require special tools. As indicated above many faults occur on the side of the brushplate that is not visible. ...
by Ron Patterson
Fri Feb 16, 2024 9:33 am
Forum: General Discussion Forum
Topic: Bendix variation.
Replies: 3
Views: 419

Re: Bendix variation.

Allan
Bendix drives came in many variation.
Attached is a copy of a very handy Bendix drive catalog that will help you identify all the different parts and their application.
Ron Patterson
by Ron Patterson
Tue Feb 13, 2024 6:04 pm
Forum: General Discussion Forum
Topic: Starter Motor
Replies: 2
Views: 393

Re: Starter Motor

A 3-4 thousandths end play is Ok, but make sure the armature commutator end clears the brush holders. Adjusting the end play depends upon what you have done with the brush cap bushing or bearing & spacer spacer and the mounting bracket main bushing thrust surface. The field pigtails are connected to...
by Ron Patterson
Fri Feb 09, 2024 11:24 am
Forum: General Discussion Forum
Topic: The not so marvelous motor mystery
Replies: 19
Views: 1461

Re: The not so marvelous motor mystery

Here is an article I wrote several years ago about the spark lever positioning for hand cranked starting.
Ron Patterson
by Ron Patterson
Fri Feb 09, 2024 11:11 am
Forum: General Discussion Forum
Topic: The not so marvelous motor mystery
Replies: 19
Views: 1461

Re: The not so marvelous motor mystery

Stan
Just a shot in the dark, but you do know how to correctly manupulate the spark lever for hand crank starting?
This is a commonly overlooked step and makes all the difference in the world.
Ron Patterson
by Ron Patterson
Thu Feb 01, 2024 6:53 pm
Forum: General Discussion Forum
Topic: TrueFire Coil Option
Replies: 19
Views: 1233

Re: TrueFire Coil Option

Jim Golden
Ford delivered over 60 million Model T ignition coils and the after market suppliers added another 5 million?
Perhaps your looking in the wrong places for Model T coils. :D
Ron Patterson
by Ron Patterson
Thu Jan 18, 2024 5:45 pm
Forum: General Discussion Forum
Topic: Early swivel joint for commutator rod?
Replies: 4
Views: 456

Re: Early swivel joint for commutator rod?

The Ford part like that has 7/32 X 32 TPI on bith male and female ends.
Ron Patterson
by Ron Patterson
Sun Jan 14, 2024 6:45 pm
Forum: General Discussion Forum
Topic: Rootlieb apron to fender mate
Replies: 21
Views: 1237

Re: Rootlieb apron to fender mate

To ?????
Tom Rootleib pareticipates on the Forum as Dollisdad.
Try contacting him and i am sure he will have insights to your problem.
Ron Patterson
by Ron Patterson
Sat Jan 13, 2024 6:45 pm
Forum: Classifieds - Parts
Topic: 26-27 PICKUP SPARE TIRE MOUNT--This one is SOLD
Replies: 7
Views: 1204

Re: 26-27 PICKUP SPARE TIRE MOUNT

Jack
Nice, complete with the shim to interface the bottom of the spare tire mount and the ribbed running board.
Ron Patterson
by Ron Patterson
Sat Jan 13, 2024 6:42 pm
Forum: Classifieds - Parts
Topic: FS: Brass Top Non Model T Coil
Replies: 7
Views: 641

Re: FS: Brass Top Non Model T Coil

George
The pictured coil came oit of a KW Master vibrator.
It is unique in taht it has no secondary winding.
Ron Patterson
by Ron Patterson
Fri Jan 12, 2024 6:13 pm
Forum: General Discussion Forum
Topic: OT but not really. Scammers are getting very bold...
Replies: 21
Views: 1164

Re: OT but not really. Scammers are getting very bold...

Here is a link to a recent NYT article on this subject. https://www.nytimes.com/2023/12/09/business/stolen-checks-telegram.html?searchResultPosition=2 The articel is long on how theives steal checks, but, understandably, no so much on how they "wash" the payee, amount and replace it with new informa...
by Ron Patterson
Fri Jan 12, 2024 5:13 pm
Forum: General Discussion Forum
Topic: OT but not really. Scammers are getting very bold...
Replies: 21
Views: 1164

Re: OT but not really. Scammers are getting very bold...

Stolen check, sold on line, washed and used to pay for goods and servi ces and the Dr's bank account will be debited.
by Ron Patterson
Fri Jan 05, 2024 5:14 pm
Forum: General Discussion Forum
Topic: Connecting rods specifications
Replies: 5
Views: 463

Re: Connecting rods specifications

I have copies of all the Record of Change cards and prints for Model T rods; T-641, T-641A and T-641B
The length specification from center of cranksahft journal end to center of piston pin end to be 6.998 to 7.002 inches and each print specifically states "with broaching shim in place".
Ron Patterson
by Ron Patterson
Wed Jan 03, 2024 10:29 am
Forum: General Discussion Forum
Topic: Want a beer?
Replies: 14
Views: 1264

Re: Want a beer?

My home town.
Main Street Riverside, California Circa 1916.
In the background you can see the bell tower on the Mission Inn at sixth street
Ron Patterson
by Ron Patterson
Tue Jan 02, 2024 10:15 am
Forum: Classifieds - Parts
Topic: For Sale-Five Rebuilt Ford Script Ignition Coils
Replies: 4
Views: 608

Re: For Sale-Five Rebuilt Ford Script Ignition Coils

The rebuilt coils have been sold.
Thanks MYTFCA Classifieds.
by Ron Patterson
Mon Jan 01, 2024 7:53 pm
Forum: Classifieds - Parts
Topic: For Sale-Five Rebuilt Ford Script Ignition Coils
Replies: 4
Views: 608

Re: For Sale-Five Rebuilt Ford Script Ignition Coils

Hi Allen You are indeed the first respondent, but as we say in the USA "nice try, but no cigar" This offer was intended for customers in the USA who enjoy cheap National flat rate shipping . Not so to S'tralia. I send you a revised rebuilt coil offer including shipping Down Under. Happy new year. Re...
by Ron Patterson
Mon Jan 01, 2024 6:16 pm
Forum: Classifieds - Parts
Topic: For Sale-Five Rebuilt Ford Script Ignition Coils
Replies: 4
Views: 608

For Sale-Five Rebuilt Ford Script Ignition Coils

Five rebuilt Ford script Model T ignition coils. Currently being rebuilt with new correct capacitor and points installed and tested on a proper test apparatus. Photo attached is how they will look when finished. If you have a 1926-1927 Improved Model T, I can use the coil point collars unique to tha...
by Ron Patterson
Tue Dec 26, 2023 6:48 pm
Forum: General Discussion Forum
Topic: Engine Casting Mark VS Engine Serial Number
Replies: 14
Views: 815

Re: Engine Casting Mark VS Engine Serial Number

Jim
Your post brings to mind one of John Regans favorite sayings about Model T's
"The car is one hundred years old and has been worked on by 100 mechanics; What are the chances they all know what they were doing"?
Ron Patterson
by Ron Patterson
Mon Dec 25, 2023 6:13 pm
Forum: General Discussion Forum
Topic: Need help
Replies: 17
Views: 1201

Re: Need help

Thanks Dan
knew what it was but couldnt come up with the correct name.
Ron Patterson
by Ron Patterson
Mon Dec 25, 2023 4:34 pm
Forum: General Discussion Forum
Topic: Need help
Replies: 17
Views: 1201

Need help

Anyone have ideas how to tighten the encircled nut.
It is 5/8 across the flats and a normal
-marked.jpg
5/8 end wrench is very ackward.
Ron Patterson
by Ron Patterson
Tue Dec 19, 2023 9:13 am
Forum: General Discussion Forum
Topic: Choke pull Rod
Replies: 12
Views: 1077

Re: Choke pull Rod

WEll I have been successful in screwing up the photos but you get the idea?
by Ron Patterson
Tue Dec 19, 2023 9:11 am
Forum: General Discussion Forum
Topic: Choke pull Rod
Replies: 12
Views: 1077

Re: Choke pull Rod

Early Holly G Carb.jpg
by Ron Patterson
Tue Dec 19, 2023 9:03 am
Forum: General Discussion Forum
Topic: Choke pull Rod
Replies: 12
Views: 1077

Re: Choke pull Rod

Sorry, here are the missing photos.
by Ron Patterson
Tue Dec 19, 2023 8:58 am
Forum: General Discussion Forum
Topic: Choke pull Rod
Replies: 12
Views: 1077

Re: Choke pull Rod- WHAT I LEARNED

First a shout out to Mark Eyre and Cory Walker I now understand why I was having trouble getting a correct choke pull rod to work on my 1915 Runabout. Lesson 1; make sure you know what carburetor you have on the 1915 car. Two carbs are correct; the early Holly G or Kingston L carb. Early Holly G Car...
by Ron Patterson
Sun Dec 17, 2023 12:29 pm
Forum: Classifieds - Parts
Topic: Wanted to buy-Early Holly G carburetor
Replies: 2
Views: 357

Re: Wanted to buy-Early Holly G carburetor

Found what I am loking for.
Thanks for the replies.
by Ron Patterson
Sat Dec 16, 2023 10:05 am
Forum: Classifieds - Parts
Topic: Wanted to buy-Early Holly G carburetor
Replies: 2
Views: 357

Wanted to buy-Early Holly G carburetor

I an seeking to buy two of the carburetor depicted in the photo attached good enough for rebuilding.
It is the earliest version of the Holly G carburetor .
Please contat me with a email or telephone call.
Ron Patterson
by Ron Patterson
Sat Dec 16, 2023 9:59 am
Forum: General Discussion Forum
Topic: Holly G Carburetors
Replies: 7
Views: 478

Re: Holly G Carburetors

Corey Thanks for the photos. Can you tell me the difference in height between the early and later Holly G carb. The great information you supplid and my discussions with Mark Eyre's and information he brought to my attention shown in Bruce McCalley's book help clearly explains waht was giving me so ...
by Ron Patterson
Fri Dec 15, 2023 9:20 pm
Forum: General Discussion Forum
Topic: Weidenhoff HCCT restoration
Replies: 13
Views: 1493

Re: HCCT restoration

Nate
Ditto
The photo of original routing of Weidenhoff HCCT wiring is new infromation and welcome to the knowlede base.
Thanks
Ron Patterson
by Ron Patterson
Fri Dec 15, 2023 7:54 pm
Forum: General Discussion Forum
Topic: Holly G Carburetors
Replies: 7
Views: 478

Re: Holly G Carburetors

I am looking for two of the Holly G Carbs EXACTALLY like shown in my post above.
If anyone has one for sale please let me know? Perhaps we can work a del on some rebuilt coils?
Ron the Coilman
by Ron Patterson
Fri Dec 15, 2023 7:31 pm
Forum: General Discussion Forum
Topic: Holly G Carburetors
Replies: 7
Views: 478

Re: Holly G Carburetors

Thanks to Mark Eyre I beleive the attached photo is of the first version of the the early Holly G Carb.
Notice it is shrter in length from later G''s and would explain why my correct choke pull rod is too short for the later G?
Early Holly G Carb.jpg
by Ron Patterson
Fri Dec 15, 2023 6:24 pm
Forum: General Discussion Forum
Topic: Holly G Carburetors
Replies: 7
Views: 478

Holly G Carburetors

I am trying to better understand Holly G carburetors (1914-1919) and which version is correct for various year car from 1914 to 1919. Please only post photos of Holly G carbs showing (a shot directly into air inlet mouth, directly into the fuel mixture outlet, both right and left sides of the carb s...
by Ron Patterson
Wed Dec 13, 2023 7:14 pm
Forum: General Discussion Forum
Topic: Choke pull Rod
Replies: 12
Views: 1077

Re: Choke pull Rod

Can anyone show me a photo of a 1915 style Holly G carb installed on a 1915 Model T with the (Ford print) correct 1March 7, 1913 choke pull rod?
Ron Patterson
by Ron Patterson
Tue Dec 12, 2023 5:03 pm
Forum: General Discussion Forum
Topic: Who is the worlds expert on Holly G carburetors?
Replies: 5
Views: 644

Who is the worlds expert on Holly G carburetors?

I need someone who has a test engine that can dynamically run my Holly G carb to determine what is wrong with it.
Anyone know the G guru?
Ron Patterson
by Ron Patterson
Tue Dec 12, 2023 4:58 pm
Forum: General Discussion Forum
Topic: Choke pull Rod
Replies: 12
Views: 1077

Choke pull Rod

The choke pull rod on my 1915 keeps falling out of the hole in carburetor choke lever..
I have the correct choke pull rod made to Ford print. How was the pull rod prevented from cominmg out of the choke lever hole?
Has anyone come up with a fix for this?
Ron Patterson
by Ron Patterson
Fri Dec 08, 2023 7:24 am
Forum: General Discussion Forum
Topic: Weidenhoff HCCT restoration
Replies: 13
Views: 1493

Re: HCCT restoration

Nathan Restore the HCCT flywheel & magnets exactly as yu would if you were going to use it in a rebuilt engine. You can reuse the brass spools, but never reuse aluminium spools. Reuse the orifinal Ford magnet clamps. They are uniquely dsigned and reproductions are soft/poorly made and do not work we...
by Ron Patterson
Thu Dec 07, 2023 1:52 pm
Forum: General Discussion Forum
Topic: Simpler times.
Replies: 11
Views: 1454

Re: Simpler times.

The (Crain & McCann vehicle is a Ford (Beaudet bodied) delivery car.
See the decal on the side?
Ron Patterson
by Ron Patterson
Tue Dec 05, 2023 10:40 am
Forum: General Discussion Forum
Topic: Generator Issues
Replies: 12
Views: 820

Re: Generator Issues

Don
I deal solely with Model T electrical issue and will be glad to help you.
Give me a call at 231-348-5085.
Ron Patterson
by Ron Patterson
Tue Nov 28, 2023 1:33 pm
Forum: General Discussion Forum
Topic: Understanding ignition dwell and the Model T timer
Replies: 6
Views: 791

Re: Understanding ignition dwell and the Model T timer

Craig
You might find thisaricle of help with understanding the Model T Ford Ignition System and Spark Timing.
Ron Patterson
by Ron Patterson
Sun Nov 12, 2023 6:21 pm
Forum: General Discussion Forum
Topic: Two odd coils
Replies: 11
Views: 813

Re: Two odd coils

Don
Here is a coil you do not see often.
In thirty-five years working on coils i have only seen one.
Ron Patterson
IMG_1131 (1).jpg
by Ron Patterson
Sun Nov 12, 2023 6:04 pm
Forum: General Discussion Forum
Topic: Two odd coils
Replies: 11
Views: 813

Re: Two odd coils

Don Odd? yes, but not uncommmon. After rebuilding over 24,000 Model T coils I've seen quite a few differentr companies who marketed (and marked with their logo) ignition coils for Model T's Kingston Kokomo Electric (only) Kingston/Kokomo Electric (combind) Shur Hit Detroit Coil Varley Coil K W Ignit...
by Ron Patterson
Fri Nov 10, 2023 6:07 pm
Forum: General Discussion Forum
Topic: who does babbit in starter snout?
Replies: 22
Views: 1501

Re: who does babbit in starter snout?

To my knowledge no one is doing babbitt?.
The current procedure is to replace the Babbitt Bendix drive head stop nut running area
Mounting bracket Bendix stop nut bushing-rebushed.jpg
with a bronze bushing.
Brent Mize can help you.
by Ron Patterson
Wed Nov 08, 2023 10:52 am
Forum: General Discussion Forum
Topic: Odd spark
Replies: 11
Views: 569

Re: Odd spark

Tim Your problem sounds to me like a carbon track has deveioped in the wood of the coilbox and the high tension spark is shourting to adjacent metal parts to ground. When a coilbox wood gets wet the car usually wont start. The natural inclination is to keep trying to get the car going, but that only...
by Ron Patterson
Fri Nov 03, 2023 6:28 pm
Forum: General Discussion Forum
Topic: Model T repairs-Old photo
Replies: 13
Views: 885

Re: Model T repairs-Old photo

Coil Service Circa 1935
by Ron Patterson
Fri Nov 03, 2023 6:26 pm
Forum: General Discussion Forum
Topic: Model T repairs-Old photo
Replies: 13
Views: 885

Re: Model T repairs-Old photo

Model T ownewr having his coils repaired.
Circa 1930
by Ron Patterson
Thu Nov 02, 2023 4:24 pm
Forum: General Discussion Forum
Topic: What did you do to your Model T in November?
Replies: 52
Views: 3929

Re: What did you do to your Model T in November?

Put my 1915 Runabout away for the Winter.
Ron Patterson
by Ron Patterson
Thu Nov 02, 2023 10:30 am
Forum: General Discussion Forum
Topic: Amp Meter discharge, but no charge?
Replies: 39
Views: 1911

Re: Amp Meter discharge, but no charge?

Bob Jablonski Cut the therapy room Psycho-Babble! On the ninth post, I explained to Travis the only three potential areas of trouble and explained I would help him how to break the problem down to get two areas checked (wiring, which is commonly incorrectly installed and determine exactly what is in...
by Ron Patterson
Thu Nov 02, 2023 8:37 am
Forum: General Discussion Forum
Topic: Amp Meter discharge, but no charge?
Replies: 39
Views: 1911

Re: Amp Meter discharge, but no charge?

This trouble shooting method is absurd, I am outa here!
by Ron Patterson
Wed Nov 01, 2023 6:35 pm
Forum: General Discussion Forum
Topic: Polarize a generator
Replies: 14
Views: 805

Ford Selection of the Third Brush Regulation Generator

Ford and other automobile manufacturers used the "Third Brush Regulation" type generator in their charging and lighting systems because it was the cheapest type available.
No surprise here?
by Ron Patterson
Wed Nov 01, 2023 6:05 pm
Forum: General Discussion Forum
Topic: Polarize a generator
Replies: 14
Views: 805

More on the Model T Ford Generator

Why the Model T Ford generator destroys itself when the battery is disconnected. I described the Model T generator “building up” process in the article entitled “Model T Ford Battery Charging System” in the technical section of the” Model T Ford Fix” website. When the (Reverse Current Relay type) c...
by Ron Patterson
Wed Nov 01, 2023 5:52 pm
Forum: General Discussion Forum
Topic: Polarize a generator
Replies: 14
Views: 805

Re: Polarize a generator

Brent is correct. If you work on Model T Ford third brush regulation type generators you should get boned up on the "Building Up' process. How it works and how faluts can prevent it from happening. Failure to Build Up is a very common problem. Here is an ariclle wrote to explain in detail how buildi...
by Ron Patterson
Tue Oct 31, 2023 1:18 pm
Forum: Classifieds - Parts
Topic: (Sold) HCCT
Replies: 7
Views: 826

Re: FS - Hand Crank Coil Tester

Mark
I am not sure what is going on, but I have not received your messsages shown above (partially)
If you will please call me at 231-348-5085 we can conclude this transaction.
Thank you
Ron Patterson
by Ron Patterson
Tue Oct 31, 2023 8:46 am
Forum: Classifieds - Parts
Topic: (Sold) HCCT
Replies: 7
Views: 826

Re: FS - Hand Crank Coil Tester

I have never heard a word from the seller?.
Ron Patterson
by Ron Patterson
Sun Oct 29, 2023 12:44 pm
Forum: General Discussion Forum
Topic: Amp Meter discharge, but no charge?
Replies: 39
Views: 1911

Re: Amp Meter discharge, but no charge?

Travis
I only work on Model T electrical issues.
Your problem description provides clues that here are only three areass you must check to isolate your trouble.
I will help you if give me a call at 231-348-5085.
Ron Patterson
by Ron Patterson
Fri Oct 27, 2023 10:39 am
Forum: Classifieds - Parts
Topic: (Sold) HCCT
Replies: 7
Views: 826

Re: FS - Hand Crank Coil Tester

Mark
I will take the HCCY.
I sent you a direct email with my information.
Ron Patterson
by Ron Patterson
Mon Oct 23, 2023 7:42 pm
Forum: General Discussion Forum
Topic: Help with Image on Patterson article...
Replies: 10
Views: 829

Re: Help with Image on Patterson article...

James
Give me a cal if you still have questions abiout Figure 7.
Ron Patterson
(3 minus 1) (1 plus 2) (0 plus 1) (2 plus 1) (9 minus 5) (6 plus 2) (1 plus 4) (0) (8) (3 plus 2)
by Ron Patterson
Mon Oct 23, 2023 6:30 pm
Forum: General Discussion Forum
Topic: Help with Image on Patterson article...
Replies: 10
Views: 829

Re: Help with Image on Patterson article...

Steve Coniff and I co-wrote that articel twenty years ago in an effort simply explain how the commonly misunderstood Model T Ford ignition system really works. The explanation remains today as one of the seminal learning documents. The diagram Figure 7 is intended to depict the inter- relationship b...
by Ron Patterson
Sat Oct 21, 2023 12:59 pm
Forum: General Discussion Forum
Topic: Perch without mark
Replies: 20
Views: 944

Re: Perch without mark

I completely agree with Steve Tomaso. I would immediately remove those (non Ford) perches and find some good originals and instal them. Ford perches were forgings. If you look around you could probably easily find two NOS Ford parts and use them. I cannot remember his name, the fellow who owned Town...
by Ron Patterson
Thu Oct 12, 2023 5:53 pm
Forum: General Discussion Forum
Topic: Passing of Steve Coniff
Replies: 8
Views: 1171

Re: Passing of Steve Coniff

This is truely sad to hear. Steve Coniff was a giant in the Model T hobby. I was honored to have been one of his freinds. If you were ever lucky enough to be invted on one of Steve's Colorado rocky mountian Model T trips the experiences were etched into your memoriy and would never be forgottern. So...
by Ron Patterson
Thu Oct 12, 2023 10:13 am
Forum: General Discussion Forum
Topic: Commutator timing help required
Replies: 19
Views: 732

Re: Commutator timing help required

John Regan had a fovorite saying about fixing Model T's: "The car is 100 years old and 100 people have been working on it. what are the chances they all knew what they were doing?"
A Model T can be made to run with many thing wrong, but that doest make it working as intended.
Ron Patterson
by Ron Patterson
Thu Oct 12, 2023 10:05 am
Forum: General Discussion Forum
Topic: Commutator timing help required
Replies: 19
Views: 732

Re: Commutator timing help required

Thank you Vince!
by Ron Patterson
Thu Oct 12, 2023 10:05 am
Forum: General Discussion Forum
Topic: Commutator timing help required
Replies: 19
Views: 732

Re: Commutator timing help required

The objective of our article above was to simply explain how the Ford magneto ignition sustem works. The article was not intended to identify all the problems with every Model T's in existence today. If your Model T has an improperly installed water inlet pipe from the radiator to the drivers side o...
by Ron Patterson
Wed Oct 11, 2023 8:22 am
Forum: General Discussion Forum
Topic: Commutator timing help required
Replies: 19
Views: 732

Re: Commutator timing help required

This article Steve Coniffif and i wrrote several years ago will help explain how and why the Model T initial spark advance was set from the factory.
Hope this helps.
Ron Patterson
by Ron Patterson
Wed Oct 04, 2023 6:40 pm
Forum: General Discussion Forum
Topic: Rough on magneto
Replies: 21
Views: 712

Re: Rough on magneto

I have spent most of my adult life working on Model T Ford electrical problems. Please do this test exactly as described, provide the results, i will interprete the results and tell you how best to procede. Go to your local auto parts store and buy a #1156 bulb. This is commonly used as a back up li...
by Ron Patterson
Mon Sep 18, 2023 9:05 am
Forum: General Discussion Forum
Topic: Coilbox Article by Bruce McCalley
Replies: 2
Views: 334

Coilbox Article by Bruce McCalley

Does anyone have an electrocic copy of the article that appeared in the vintage Ford Magazine written by Bruce McCalley whick showes photos of various Model T Ford coilboxes?
Alternatively does anyone know which issue of the Vintage Ford magazine this article appeared?
Ron Patterson
by Ron Patterson
Sat Sep 16, 2023 6:38 pm
Forum: General Discussion Forum
Topic: Front License Plat Mounting
Replies: 18
Views: 1149

Re: Front License Plat Mounting

Mark
Sent you an email.
Ron Patterson
by Ron Patterson
Fri Sep 15, 2023 4:17 pm
Forum: General Discussion Forum
Topic: Front License Plat Mounting
Replies: 18
Views: 1149

Re: Front License Plat Mounting

Canadian Factory
by Ron Patterson
Fri Sep 15, 2023 4:08 pm
Forum: General Discussion Forum
Topic: Front License Plat Mounting
Replies: 18
Views: 1149

Re: Front License Plat Mounting

I did use a factory styoe unit.....from Canada
by Ron Patterson
Thu Sep 14, 2023 6:11 pm
Forum: General Discussion Forum
Topic: Front License Plat Mounting
Replies: 18
Views: 1149

Re: Front License Plat Mounting

Steve When I got my 1915 Runabout it had a poorly made aluminium reproduction Canadian style license plate mounted on the passenger side headlamp stancion. This positioned my 1915 Michigan plate too close to the choke pull rod loop and in the way of a clear swing of the hand held crank handle. I tri...
by Ron Patterson
Thu Sep 07, 2023 4:18 pm
Forum: Classifieds - Parts
Topic: Circa 1914 to 1919 Metal Top Ignition Coils Rebuilt
Replies: 2
Views: 298

Circa 1914 to 1919 Metal Top Ignition Coils Rebuilt

I have several hundred Circa 1914 to 1919 metal top ignition coil cores available for rebuilding. If anyone is interested in obtaining a set of these rebuilt coils please contact me. Get the correct coils for your 1914-1919 Model T metal coilbox. For your reference I have attached two photos of rebu...
by Ron Patterson
Mon Sep 04, 2023 12:26 pm
Forum: General Discussion Forum
Topic: HCCT Magneto Coatings - What, if anything, needs to be bare?
Replies: 5
Views: 409

Re: HCCT Magneto Coatings - What, if anything, needs to be bare?

Notice the small piece of emery cloth?
Thats for spark gap cleaning.
by Ron Patterson
Mon Sep 04, 2023 12:15 pm
Forum: General Discussion Forum
Topic: HCCT Magneto Coatings - What, if anything, needs to be bare?
Replies: 5
Views: 409

Re: HCCT Magneto Coatings - What, if anything, needs to be bare?

I have restored over 50 HCCT's so I qualify to opine. This procedure will address your painted surface questions. This process is for a Ford /Ford clone HCCT. With the exception of the spark ring mechanism (I will address the spark ring later) everything may be painted. Do not paint electrical conne...
by Ron Patterson
Tue Aug 29, 2023 9:24 pm
Forum: General Discussion Forum
Topic: Unusual Mixture control
Replies: 11
Views: 930

Re: Unusual Mixture control

Not to much news there.
Rignty Tighty=leaner. Lefty loosey+Richer.
by Ron Patterson
Mon Aug 28, 2023 1:41 pm
Forum: General Discussion Forum
Topic: Oil leak/puddle underneath the starter...
Replies: 22
Views: 1193

Re: Oil leak/puddle underneath the starter...

Early Model T starters were equipped with a felt seal for the Mounting Bracket/armature shaft seal. See attachd photo on Right. Not sure how long this was done, but you don't see them very often. Those units did not have a drip hole drilled in the bottom of the starter case.. I rebuilt over 500 Mode...
by Ron Patterson
Wed Aug 23, 2023 12:51 pm
Forum: Classifieds - Parts
Topic: For SAle Restored Circa1915 Metal Top Coils
Replies: 9
Views: 673

Re: For SAle Restored Circa1915 Metal Top Coils

The four Circa 1915 rebuilt ignition coils have been sold. In thirteen minutes!!
Thanks MTFCA Classifieds.
Ron Patterson
by Ron Patterson
Wed Aug 23, 2023 8:36 am
Forum: Classifieds - Parts
Topic: For SAle Restored Circa1915 Metal Top Coils
Replies: 9
Views: 673

Re: For SAle Restored Circa1915 Metal Top Coils

I had my Forum preference set wrong.
I now think a can now receive direct messages.
Ron Patterson
by Ron Patterson
Wed Aug 23, 2023 8:29 am
Forum: Classifieds - Parts
Topic: For SAle Restored Circa1915 Metal Top Coils
Replies: 9
Views: 673

Re: For SAle Restored Circa1915 Metal Top Coils

Bettyer to contact me via email.
I am not receiving messages from this forum.
by Ron Patterson
Tue Aug 22, 2023 8:00 pm
Forum: Classifieds - Parts
Topic: For SAle Restored Circa1915 Metal Top Coils
Replies: 9
Views: 673

Re: For SAle Restored Circa1915 Metal Top Coils

I am told by the MTFCA grand webmaster that I must be logged in to get direct messages and i was not.
I am not. Please try agian?
Ron Patterson
by Ron Patterson
Tue Aug 22, 2023 6:17 pm
Forum: Classifieds - Parts
Topic: For SAle Restored Circa1915 Metal Top Coils
Replies: 9
Views: 673

Re: For SAle Restored Circa1915 Metal Top Coils

No emal yet?
Still for sale.
Ron Patterson
by Ron Patterson
Tue Aug 22, 2023 5:02 pm
Forum: Classifieds - Parts
Topic: For SAle Restored Circa1915 Metal Top Coils
Replies: 9
Views: 673

For SAle Restored Circa1915 Metal Top Coils

A nice set of metal top Circa 1915 Model T Ford ignition coils shown in the attached photo are offered here for sale. I removed these coils from a restored 1915 Model T Runabout I recently purchased. They worked great but needed new points/adjustment and cleaning up a bit. Being a coil perfectionist...