Search found 1053 matches

by Joe Bell
Thu Mar 28, 2024 7:40 am
Forum: Classifieds - Parts
Topic: Dome light switch WTB
Replies: 6
Views: 231

Re: Dome light switch WTB

eric that is the one I have in mine!
by Joe Bell
Tue Mar 26, 2024 10:03 pm
Forum: General Discussion Forum
Topic: Finally got windows.
Replies: 8
Views: 457

Re: Finally got windows.

Can not wait to see this in person!
by Joe Bell
Tue Mar 26, 2024 3:18 pm
Forum: General Discussion Forum
Topic: That’s a carload!
Replies: 9
Views: 534

Re: That’s a carload!

Have power, will travel!
by Joe Bell
Sun Mar 24, 2024 5:10 pm
Forum: Classifieds - Parts
Topic: WTB: Early Wishbone
Replies: 3
Views: 249

Re: WTB: Early Wishbone

I may have one up in the barn Tiffin Ohio
by Joe Bell
Thu Mar 21, 2024 10:21 pm
Forum: General Discussion Forum
Topic: Warped manifold
Replies: 8
Views: 594

Re: Warped manifold

You can straighten them with out breaking them, just time and heat, and weight of wrench if you rush it , it will break!
by Joe Bell
Thu Mar 14, 2024 3:36 pm
Forum: Classifieds - Parts
Topic: WTB crankshaft
Replies: 6
Views: 698

Re: WTB crankshaft

I also have a couple already ground if still looking.
by Joe Bell
Thu Mar 14, 2024 7:53 am
Forum: General Discussion Forum
Topic: 1912 Length of horn conduit?
Replies: 16
Views: 527

Re: 1912 Length of horn conduit?

My original 12 shows the horn on the inside, firewall is drilled and the mounting holes on door are on inside, never been restored.
by Joe Bell
Wed Mar 13, 2024 7:57 pm
Forum: Classifieds - Parts
Topic: 26-7 horn bracket
Replies: 3
Views: 287

Re: 26-7 horn bracket

I have found one locally, thanks.
by Joe Bell
Tue Mar 12, 2024 7:31 am
Forum: Classifieds - Parts
Topic: WTB crankshaft
Replies: 6
Views: 698

Re: WTB crankshaft

I have at least thirty to pick from, come take a look and measure them.
by Joe Bell
Mon Mar 11, 2024 10:54 am
Forum: General Discussion Forum
Topic: 26 4dor dome light
Replies: 8
Views: 360

Re: 26 4dor dome light

Dan, that switch reminds me of years ago, needed one for my Fordor, saw one on ebay, got in a bidding war, paid 110. dollars for it next day close friend was telling me of this asshole that bidded him up on a switch, but did we have a good laugh on that one!
by Joe Bell
Mon Mar 11, 2024 9:33 am
Forum: General Discussion Forum
Topic: 26 4dor dome light
Replies: 8
Views: 360

Re: 26 4dor dome light

Joe Bell found one in his T collection!
by Joe Bell
Mon Mar 11, 2024 9:13 am
Forum: Classifieds - Parts
Topic: WTB dash light 26
Replies: 3
Views: 226

Re: WTB dash light 26

I may have found one of them also, give me a jingle and will send you pictures.
by Joe Bell
Sun Mar 10, 2024 1:45 pm
Forum: Classifieds - Parts
Topic: 26-7 horn bracket
Replies: 3
Views: 287

26-7 horn bracket

Looking for a 26-7 horn bracket, I know repops are out there but would like an original. Thanks Joe
by Joe Bell
Sat Mar 09, 2024 4:14 pm
Forum: Classifieds - Parts
Topic: 25-7 rear doors for a Fordor
Replies: 2
Views: 227

Re: 25-7 rear doors for a Fordor

I did not see BUDD, the front doors that came with this set had BUDD on them is it possible the rears where not stamped?
by Joe Bell
Thu Mar 07, 2024 7:40 pm
Forum: Classifieds - Parts
Topic: 25-7 rear doors for a Fordor
Replies: 0
Views: 153

25-7 rear doors for a Fordor

I have both all steel doors for the rear of a Fordor no glass or hardware in the , no rust, for got they where up in the barn, need to find a new home.419-618-1025 would make a heck of a deal to some one.
by Joe Bell
Thu Mar 07, 2024 7:39 pm
Forum: Classifieds - Parts
Topic: 25-7 rear doors for a Fordor
Replies: 2
Views: 227

25-7 rear doors for a Fordor

I have both all steel doors for the rear of a Fordor no glass or hardware in the , no rust, for got they where up in the barn, need to find a new home.419-618-1025 would make a heck of a deal to some one.
by Joe Bell
Wed Mar 06, 2024 9:59 am
Forum: General Discussion Forum
Topic: Question on clutch discs
Replies: 2
Views: 246

Re: Question on clutch discs

I am with John on this one, have seen drums where people have tried to do this and the hardened shoes have came loose and going through the engine shorting field coil and breaking brass magnet clamp screws off.
by Joe Bell
Sat Mar 02, 2024 3:31 pm
Forum: General Discussion Forum
Topic: Need help re broken piece
Replies: 18
Views: 1108

Re: Need help re broken piece

Why not epoxy it back together give it some extra coats and use it for a pattern to machine some new ones? I have a local foundry that enjoys making things for me from all the old broken T iron I give them.
by Joe Bell
Tue Feb 27, 2024 1:31 pm
Forum: General Discussion Forum
Topic: Strange Transmission Brake band material
Replies: 14
Views: 925

Re: Strange Transmission Brake band material

The brass pieces in there are never good on the babbitt bearings have seen the mess before.
by Joe Bell
Mon Feb 26, 2024 9:50 pm
Forum: General Discussion Forum
Topic: Down Draft Intake Manifold Info
Replies: 8
Views: 759

Re: Down Draft Intake Manifold Info

Wish I found it , zoom zoom!
by Joe Bell
Mon Feb 26, 2024 6:12 pm
Forum: General Discussion Forum
Topic: Which steering column is 1916?
Replies: 10
Views: 645

Re: Which steering column is 1916?

I thought the 16 had flattened out throttle and spark arms like the earlier ones?
by Joe Bell
Mon Feb 26, 2024 7:05 am
Forum: General Discussion Forum
Topic: We lost another one
Replies: 2
Views: 732

Re: We lost another one

Met Bob on the Ohio Jamboree, sure loved the T's will miss seeing him.
by Joe Bell
Sun Feb 25, 2024 12:00 pm
Forum: General Discussion Forum
Topic: Marietta swap meet fender hunting
Replies: 3
Views: 371

Re: Marietta swap meet fender hunting

I think he is after headlight bar mounted, just talked to him friday.
by Joe Bell
Fri Feb 23, 2024 3:39 pm
Forum: General Discussion Forum
Topic: Vent whatchamacallit
Replies: 4
Views: 393

Re: Vent whatchamacallit

I lasered out a couple extra of the steer step bracket if that is what you are looking for from my 24 coupe. 419-618-1025 Joe Bell Tiffin Ohio
by Joe Bell
Wed Feb 21, 2024 9:50 pm
Forum: General Discussion Forum
Topic: You tell me
Replies: 63
Views: 5130

Re: You tell me

Looks better than the last time i saw it! Nice work on the sheetmetal, who did it? just joking!
by Joe Bell
Thu Feb 15, 2024 8:06 pm
Forum: General Discussion Forum
Topic: Turbo 400 Clutch Discs
Replies: 29
Views: 1651

Re: Turbo 400 Clutch Discs

I have replaced many of these after market clutches, if you drive them right they will last but if you slip them then your asking for trouble, to me the big issue is if and when they fail they are deep in the engine and it has to come out to replace, I have never seen original ones fail!
by Joe Bell
Fri Feb 09, 2024 4:23 pm
Forum: Classifieds - Parts
Topic: WTB: Vaporizer for 27
Replies: 7
Views: 475

Re: WTB: Vaporizer for 27

How many you want!
by Joe Bell
Thu Feb 08, 2024 2:03 pm
Forum: Classifieds - Parts
Topic: WTB older black side mirrors
Replies: 5
Views: 455

Re: WTB older black side mirrors

I think there is one old round one that has the two screws to support it.
by Joe Bell
Mon Feb 05, 2024 7:00 pm
Forum: Classifieds - Parts
Topic: Door trim
Replies: 6
Views: 556

Re: Door trim

That front windshield trim for adjusting the front window is really hard to come by, I had to make one years back.
by Joe Bell
Tue Jan 30, 2024 4:37 pm
Forum: General Discussion Forum
Topic: Restoring a KR Wilson transmission fixture
Replies: 7
Views: 725

Re: Restoring a KR Wison transmission fixture

When I first picked up mine, it was just for show and tell then one day decided to try it and now it gets used a bunch, do you have the triple gear attachment? I have one extra.
by Joe Bell
Fri Jan 26, 2024 4:25 pm
Forum: General Discussion Forum
Topic: T Roadster on Hagerty auction question
Replies: 10
Views: 862

Re: T Roadster on Hagerty auction question

Dan, That was larry Hengenius's car and it did have a door from factory.
by Joe Bell
Wed Jan 24, 2024 4:08 pm
Forum: Classifieds - Parts
Topic: FS Window regulator
Replies: 1
Views: 151

Re: FS Window regulator

what a steal!
by Joe Bell
Tue Jan 23, 2024 10:32 am
Forum: Classifieds - Parts
Topic: Wanted to Buy…..oil breather
Replies: 4
Views: 436

Re: Wanted to Buy…..oil breather

I found it ,get a hold of me off line so we can talk. Joe
by Joe Bell
Mon Jan 22, 2024 10:25 pm
Forum: Classifieds - Parts
Topic: Wanted to Buy…..oil breather
Replies: 4
Views: 436

Re: Wanted to Buy…..oil breather

I think I do
by Joe Bell
Sat Jan 13, 2024 9:36 pm
Forum: General Discussion Forum
Topic: A Loose Crankshaft Front Pulley
Replies: 22
Views: 1105

Re: A Loose Crankshaft Front Pulley

I use an old drill bushing, press it on it down sizes it then pop it back off.
by Joe Bell
Thu Jan 11, 2024 7:58 am
Forum: Classifieds - Parts
Topic: FS Original 1912-1913 Nonpareil Brass Horn
Replies: 17
Views: 1301

Re: FS Original 1912-1913 Nonpareil Brass Horn

Thanks Lesson learned
by Joe Bell
Wed Jan 10, 2024 9:49 pm
Forum: Classifieds - Parts
Topic: FS Original 1912-1913 Nonpareil Brass Horn
Replies: 17
Views: 1301

Re: FS Original 1912-1913 Nonpareil Brass Horn

12 would of been a double.
by Joe Bell
Sun Jan 07, 2024 9:27 pm
Forum: Classifieds - Parts
Topic: Diff Carrier w Ring Gear & Pinion FS
Replies: 13
Views: 1013

Re: Diff Carrier w Ring Gear & Pinion FS

Dan, I will be tearing a rear axle apart the end of week and may need them.
by Joe Bell
Mon Jan 01, 2024 9:07 am
Forum: Classifieds - Parts
Topic: A Starter Ring Gear Problem
Replies: 8
Views: 405

Re: A Starter Ring Gear Problem

It has been a while since those ring gears where made, remember them well making sure you got the screws to match them.
by Joe Bell
Sat Dec 30, 2023 9:44 am
Forum: Classifieds - Parts
Topic: Diff Carrier w Ring Gear & Pinion FS
Replies: 13
Views: 1013

Re: Diff Carrier w Ring Gear & Pinion FS

can not believe that has not sold yet? I would run them in a heart beat!
by Joe Bell
Fri Dec 29, 2023 9:01 am
Forum: General Discussion Forum
Topic: Ruckstell axle, can it do what a "T" can't
Replies: 17
Views: 896

Re: Ruckstell axle, can it do what a "T" can't

The part I like the best is turning a corner in town, drop a gear and it is just what you need for a heavy car.
by Joe Bell
Wed Dec 27, 2023 6:53 pm
Forum: General Discussion Forum
Topic: High Volume Oil Line (HVOL) question.
Replies: 24
Views: 1051

Re: High Volume Oil Line (HVOL) question.

I may have a couple in a cabinet in the barn, never use them, figure more chances of something falling off and going through the engine.
by Joe Bell
Tue Dec 26, 2023 10:00 pm
Forum: General Discussion Forum
Topic: Engine Casting Mark VS Engine Serial Number
Replies: 14
Views: 752

Re: Engine Casting Mark VS Engine Serial Number

For instance the early 09-10 blocks have three casting dots on the inside and the rear web is really thin.
by Joe Bell
Tue Dec 26, 2023 9:59 pm
Forum: General Discussion Forum
Topic: Engine Casting Mark VS Engine Serial Number
Replies: 14
Views: 752

Re: Engine Casting Mark VS Engine Serial Number

I have seen all kinds out there, some cars that think they are a special one and the block is not correct for the year, Ford changed the blocks so many times through production and if you do not know the difference on the outside or inside most never know.
by Joe Bell
Tue Dec 26, 2023 9:53 pm
Forum: Classifieds - Parts
Topic: For Sale: Hassler Pancakes for Rear
Replies: 3
Views: 432

Re: For Sale: Hassler Pancakes for Rear

A few years back they where going for 400. and now not even 150? That is a shame!
by Joe Bell
Mon Dec 25, 2023 10:42 pm
Forum: General Discussion Forum
Topic: Best home cleaning method for large parts?
Replies: 7
Views: 860

Re: Best home cleaning method for large parts?

do you have the attachment to bore the triple gears? they are always gone.
by Joe Bell
Mon Dec 25, 2023 5:01 pm
Forum: General Discussion Forum
Topic: Who has a Kelsey Felloe?
Replies: 12
Views: 548

Re: Who has a Kelsey Felloe?

The lugs I have and nuts are flat? yours are beveled?
by Joe Bell
Sat Dec 23, 2023 6:44 pm
Forum: Classifieds - Parts
Topic: WTB Side Curtain Rods for 26 Touring
Replies: 3
Views: 204

Re: WTB Side Curtain Rods for 26 Touring

I just found three in the barn two longer than the other?
by Joe Bell
Sat Dec 23, 2023 6:42 pm
Forum: Classifieds - Parts
Topic: WTB: Straight Rebuildable 26-27 coilbox with lid.
Replies: 3
Views: 258

Re: WTB: Straight Rebuildable 26-27 coilbox with lid.

I have several 26-7 boxes you are welcome to but no lids.
by Joe Bell
Fri Dec 22, 2023 5:22 pm
Forum: General Discussion Forum
Topic: What Oil Should I Use in My Fip Top Oilers?
Replies: 16
Views: 884

Re: What Oil Should I Use in My Fip Top Oilers?

Chainsaw bar oil, nice and sticky.
by Joe Bell
Thu Dec 21, 2023 9:36 pm
Forum: General Discussion Forum
Topic: Removal of an Engine With an Aluminum Head
Replies: 15
Views: 940

Re: Removal of an Engine With an Aluminum Head

It use to scare me to do that till a friend Mike Parker said if it will not hold it should not not a plug then! So I have been lifting them ever since!
by Joe Bell
Tue Dec 19, 2023 9:40 pm
Forum: General Discussion Forum
Topic: I am putting a starter on my 1916 coupelet.
Replies: 11
Views: 741

Re: I am putting a starter on my 1916 coupelet.

There is never any fun on stalling one in a busy intersection, almost every engine I rebuild gets a ring gear in it if not for now but future use! I try to tell people with early cars some day we are going to get older and the car with the starter on it will get used instead!
by Joe Bell
Fri Dec 15, 2023 7:02 am
Forum: Classifieds - Parts
Topic: 3017B Timing Gear Cover plate FS
Replies: 10
Views: 682

Re: 3017B Timing Gear Cover plate FS

rare item these days!
by Joe Bell
Wed Dec 06, 2023 5:25 pm
Forum: Classifieds - Parts
Topic: WANTED 1923 ENGINE BLOCK
Replies: 13
Views: 797

Re: WANTED 1923 ENGINE BLOCK

I Have serial numbers that came off of blocks before they went to the foundry, you can stamp them on your block, free!
by Joe Bell
Wed Dec 06, 2023 7:40 am
Forum: Classifieds - Parts
Topic: WANTED 1923 ENGINE BLOCK
Replies: 13
Views: 797

Re: WANTED 1923 Ford Title.

Some States is a whole lot harder to get one than others, Ohio you stole it till proved other ways and that is expensive!
by Joe Bell
Tue Dec 05, 2023 9:48 pm
Forum: Classifieds - Parts
Topic: Needed pieces.
Replies: 5
Views: 622

Re: Needed pieces.

Tom, I have coffee cans of bearings and original thrust washer and some brass ones. Remind me the next time we see each other.
by Joe Bell
Sun Dec 03, 2023 4:40 pm
Forum: Classifieds - Parts
Topic: Wanted: Exhaust Cutout for an Early Minerva Three-Tube Whistle
Replies: 3
Views: 271

Re: Wanted: Exhaust Cutout for an Early Minerva Three-Tube Whistle

I have a couple different styles. Tiffin Ohio
by Joe Bell
Wed Nov 29, 2023 10:43 am
Forum: Classifieds - Parts
Topic: WTB: aftermarket T head
Replies: 20
Views: 1355

Re: WTB: aftermarket T head

I have an AC on my car, have ran it for years, love the looks since no one knows it is high compression.
by Joe Bell
Sun Nov 26, 2023 8:36 am
Forum: Classifieds - Parts
Topic: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven
Replies: 5
Views: 491

Re: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven

The one I have is the aluminum one for std. size tail shaft.
by Joe Bell
Sat Nov 25, 2023 5:26 pm
Forum: Classifieds - Parts
Topic: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven
Replies: 5
Views: 491

Re: WTB: Ball Bearing 4th Main by Texas T Parts/ Bird Haven

I may have a used one on the shelf in the barn will have to look tomorrow
by Joe Bell
Fri Nov 24, 2023 2:10 pm
Forum: Classifieds - Parts
Topic: WTB: aftermarket T head
Replies: 20
Views: 1355

Re: WTB: aftermarket T head

Tom Rootlieb had an early Reader head he was wanting to part with when I saw him wednesday.
by Joe Bell
Sun Nov 19, 2023 8:29 pm
Forum: General Discussion Forum
Topic: Silicon head gasket questions
Replies: 16
Views: 958

Re: Silicon head gasket questions

I have one hanging on a nail in the barn to show where the seal let loose.
by Joe Bell
Sun Nov 19, 2023 7:20 am
Forum: General Discussion Forum
Topic: Loaded up
Replies: 5
Views: 730

Re: Loaded up

Can't wait to see it next week.
by Joe Bell
Fri Nov 10, 2023 2:33 pm
Forum: General Discussion Forum
Topic: accessori fender brace?
Replies: 7
Views: 381

Re: accessori fender brace?

I know Bill Lucius had one at hershey, 419 -595-2310 it was a new one.
by Joe Bell
Tue Oct 24, 2023 7:12 am
Forum: General Discussion Forum
Topic: Taking out a Fordoor engine
Replies: 10
Views: 598

Re: Taking out a Fordoor engine

Pull the column and hood shelves , I use third plug hole to lift by.
by Joe Bell
Thu Oct 19, 2023 6:25 pm
Forum: Classifieds - Parts
Topic: WTB top of window seal
Replies: 3
Views: 197

Re: WTB top of window seal

found one, give me a jingle 419-618-1025
by Joe Bell
Thu Oct 19, 2023 6:13 pm
Forum: General Discussion Forum
Topic: High compression head
Replies: 6
Views: 630

Re: High compression head

The top looks like an early Reeder head, but the bottom is different, maybe they where playing with combustion chamber?
by Joe Bell
Tue Oct 10, 2023 5:31 pm
Forum: General Discussion Forum
Topic: Unusual T Ford hub cap found at Hershey
Replies: 9
Views: 901

Re: Unusual T Ford hub cap found at Hershey

I have one just like that on my unrestored 12, thought it was a fluke now wondering?
by Joe Bell
Sun Oct 08, 2023 8:39 am
Forum: Classifieds - Parts
Topic: Looking for
Replies: 4
Views: 567

Re: Looking for

I may have the fender irons for the forked lights but no eyelet ones for top strap?
by Joe Bell
Fri Oct 06, 2023 4:38 pm
Forum: Classifieds - Parts
Topic: WTB. Rebuilt short block..
Replies: 3
Views: 421

Re: WTB. Rebuilt short block..

I just hauled a complete engine home from Hershey that looks promising for a daily driver?
by Joe Bell
Thu Sep 28, 2023 7:02 am
Forum: General Discussion Forum
Topic: counterbalanced crankshaft what make??
Replies: 18
Views: 1053

Re: counterbalanced crankshaft what make??

years back I checked the metallurgy of them and they where high Cromium in them like the Dodge Bros. cranks.
by Joe Bell
Wed Sep 27, 2023 12:56 pm
Forum: Classifieds - Parts
Topic: rebuilt Field Coils
Replies: 0
Views: 235

rebuilt Field Coils

I will have some of the Lucius family field coils at hershey C41 29-31 or light pole 41, he will be there wednesday.
by Joe Bell
Tue Sep 26, 2023 7:49 am
Forum: General Discussion Forum
Topic: Model T copy Metz engine
Replies: 16
Views: 1155

Re: Model T copy Metz engine

The Metz head is different on two bolt holes, the need sleeved and redrilled to make work, close friend has one on his car, he also counter sunk the plugs deeper so special plugs are no longer needed, it did up the compression a bunch, he said if he had to do it over again he would just run the Hi c...
by Joe Bell
Fri Sep 22, 2023 6:52 pm
Forum: General Discussion Forum
Topic: Gaslight Auto parts
Replies: 10
Views: 864

Re: Gaslight Auto parts

Nick even brings me the parts to local airport, can get a piece of pie and T Parts, takes me 22 minutes to fly there, good excuse to fly !
by Joe Bell
Sat Sep 16, 2023 5:19 pm
Forum: Classifieds - Parts
Topic: WTD 1914 engine
Replies: 4
Views: 487

Re: WTD 1914 engine

do you want just the block , tiffin ohio
by Joe Bell
Thu Sep 14, 2023 7:13 am
Forum: Classifieds - Parts
Topic: Connecting Rod Cores
Replies: 3
Views: 351

Re: Connecting Rod Cores

Dan would love to buy some good caps if the rods come with them oh well! see you at hershey!
by Joe Bell
Thu Sep 14, 2023 7:11 am
Forum: Classifieds - Parts
Topic: WTB: Left Side Small Drum Housing
Replies: 3
Views: 214

Re: WTB: Left Side Small Drum Housing

Come take your pick, Tiffin Ohio, 419-618-1025 Joe Bell
by Joe Bell
Tue Sep 12, 2023 6:52 pm
Forum: General Discussion Forum
Topic: Rob Sterling Pottsville Pa. contact
Replies: 6
Views: 405

Re: Rob Sterling Pottsville Pa. contact

Thanks to some one he contacted me!
by Joe Bell
Tue Sep 12, 2023 5:13 pm
Forum: General Discussion Forum
Topic: Rob Sterling Pottsville Pa. contact
Replies: 6
Views: 405

Re: Rob Sterling Pottsville Pa. contact

I have tried emailing and looking on the net for other phone contacts.
by Joe Bell
Tue Sep 12, 2023 12:52 pm
Forum: General Discussion Forum
Topic: Rob Sterling Pottsville Pa. contact
Replies: 6
Views: 405

Re: Rob Sterling Pottsville Pa. contact

would love to return his engine to hershey for him? Any one?
by Joe Bell
Sat Sep 09, 2023 7:09 am
Forum: General Discussion Forum
Topic: Post Your 2023 Hershey Spaces and Goods on Offer Here!
Replies: 43
Views: 4278

Re: Post Your 2023 Hershey Spaces and Goods on Offer Here!

C4I 29-31 or look for light pole 41, right next to the Divco truck and Brookville Roadster.
by Joe Bell
Wed Sep 06, 2023 5:59 pm
Forum: General Discussion Forum
Topic: Rob Sterling Pottsville Pa. contact
Replies: 6
Views: 405

Re: Rob Sterling Pottsville Pa. contact

any one by chance know him in your area?
by Joe Bell
Tue Sep 05, 2023 7:36 pm
Forum: General Discussion Forum
Topic: Ohio Jamboree
Replies: 3
Views: 388

Re: Ohio Jamboree

Well said Jerry!
by Joe Bell
Tue Sep 05, 2023 4:27 pm
Forum: General Discussion Forum
Topic: Rob Sterling Pottsville Pa. contact
Replies: 6
Views: 405

Rob Sterling Pottsville Pa. contact

Looking to get a hold of Rob. Thanks Joe
by Joe Bell
Fri Aug 25, 2023 11:05 am
Forum: General Discussion Forum
Topic: Quick school show & covered bridge picnic tour
Replies: 7
Views: 574

Re: Quick school show & covered bridge picnic tour

Wish i knew the pic I would of cleaned up some !
by Joe Bell
Thu Aug 24, 2023 12:22 pm
Forum: General Discussion Forum
Topic: Cylinder Head Flatness
Replies: 16
Views: 1037

Re: Cylinder Head Flatness

As some one comment on I have had to shorten the bolts from block and heads being milled so bolt does not bottom out.
by Joe Bell
Thu Aug 17, 2023 5:58 pm
Forum: Classifieds - Parts
Topic: WTB 1912 Double Stack Magneto Coil
Replies: 6
Views: 484

Re: WTB 1912 Double Stack Magneto Coil

1912 will have the sheetmetal plate with 1/4 double stack, made for the 5/8 magnets unless it has been changed?
by Joe Bell
Thu Aug 17, 2023 11:05 am
Forum: Classifieds - Parts
Topic: WTB 1912 Double Stack Magneto Coil
Replies: 6
Views: 484

Re: WTB 1912 Double Stack Magneto Coil

Lucius family rebuilds them every day, they are the supplier for all 419-595-2310. Hope this helps
by Joe Bell
Sun Jul 23, 2023 3:17 pm
Forum: General Discussion Forum
Topic: Back in the saddle
Replies: 60
Views: 5102

Re: Back in the saddle

Nice oiler on the hogshead, looks factory!
by Joe Bell
Thu Jul 20, 2023 1:29 pm
Forum: Classifieds - Parts
Topic: WTB 1912-1916 long nose oil pan.
Replies: 15
Views: 739

Re: WTB 1912-1916 long nose oil pan.

If you are not in a hurry have a friend that travels to Ohio a few times a year, he is in Raliegh Durham area, I have several 14-17 pans. 419-618-1025 Tiffin Ohio.
by Joe Bell
Mon Jul 17, 2023 6:37 am
Forum: General Discussion Forum
Topic: 1925/26 coupe project
Replies: 26
Views: 1170

Re: 1925/26 coupe project

That is a 26 body, so you need 26 hood and high radiator.
by Joe Bell
Mon Jul 17, 2023 6:34 am
Forum: Classifieds - Parts
Topic: Wanted coupe doors
Replies: 3
Views: 321

Re: Wanted coupe doors

Just gave a set away, tree had fallen on back part of body.
by Joe Bell
Fri Jul 14, 2023 4:47 pm
Forum: General Discussion Forum
Topic: Clutch meltdown
Replies: 12
Views: 995

Re: Clutch meltdown

Can you say SHIT!
by Joe Bell
Wed Jul 12, 2023 3:26 pm
Forum: General Discussion Forum
Topic: Brass painted Black
Replies: 18
Views: 1340

Re: Brass painted Black

The dash is painted black also inside and out, I use to paint cars for a living so I know when one has been repainted or not, some of this car had some brush work on it but not the body.
by Joe Bell
Tue Jul 11, 2023 9:23 pm
Forum: General Discussion Forum
Topic: Brass painted Black
Replies: 18
Views: 1340

Brass painted Black

I just bought a 12 touring today, and unrestored car, and all the brass is painted black, was told back in the day the Menonite community could not have brass showing so dealerships painted it black for the customer? Anyone ever heard of this? Thanks Joe.
by Joe Bell
Wed Jul 05, 2023 6:49 am
Forum: General Discussion Forum
Topic: Back in the saddle
Replies: 60
Views: 5102

Re: Back in the saddle

Can not wait to see it back in Ohio!