Wishing you the very best!
Don & Carol Conklin
Search found 13 matches
- Wed Jul 19, 2023 9:43 pm
- Forum: General Discussion Forum
- Topic: Congratulations Patricia Stone (Roy)
- Replies: 7
- Views: 648
- Fri Dec 23, 2022 4:37 pm
- Forum: General Discussion Forum
- Topic: Flat towing a T
- Replies: 14
- Views: 1761
Re: Flat towing a T
The gentlemen I bought my trailer from stated that prior to his getting the trailer, he used a tow bar with the T engine running. I don’t recommend it!
- Thu Oct 20, 2022 3:05 pm
- Forum: General Discussion Forum
- Topic: Side curtains
- Replies: 6
- Views: 989
Re: Side curtains
Thanks, I was hoping to save the difference between the two. I haven’t been able to find anyone willing to sell less than a full set.
- Thu Oct 20, 2022 11:58 am
- Forum: General Discussion Forum
- Topic: Side curtains
- Replies: 6
- Views: 989
Side curtains
I lost the front side curtains for my 1919 touring, will the curtains for a 1919 roadster fit? Don’t leave curtains laying on a running board. Thanks
- Sun May 02, 2021 10:09 am
- Forum: General Discussion Forum
- Topic: Rear main cap removal advice
- Replies: 19
- Views: 2951
Re: Rear main cap removal advice
What about slotting the holes in the cap so the cap can move forward to reduce the end play. Ref. Ted Aschman’s “Tinkering Tips” volume 2, page 2
- Tue Mar 10, 2020 10:11 pm
- Forum: General Discussion Forum
- Topic: Question about LED lights
- Replies: 3
- Views: 2052
Question about LED lights
Can 12 volt automotive LED lights be used on a 12 volt AC system. ( landscape lighting )
- Thu Dec 05, 2019 10:42 pm
- Forum: General Discussion Forum
- Topic: Very dark day. Howard is gone.
- Replies: 46
- Views: 13695
Re: Very dark day. Howard is gone.
I met Howard once on a tour near San Diego. I was admiring (7) in the parking lot of the host hotel when he said you look like you need a ride. Man did I get a ride ,in a wet parking lot with lots of painted stripes. He liked to turn left and I didn't put the seat belt on. The slow ride I was expect...
- Sat Sep 28, 2019 4:27 pm
- Forum: General Discussion Forum
- Topic: OPS!! dropped a washer!
- Replies: 27
- Views: 8710
Re: OPS!! dropped a washer!
If your engine does not have a mag. plate you can get pretty good access by removing the inspection cover from the bottom of the oil pan. It's messy but it worked for me.
- Sat Apr 20, 2019 7:55 am
- Forum: General Discussion Forum
- Topic: Fuel pump
- Replies: 16
- Views: 6908
Re: Fuel pump
Consider installing a gasoline tank vent kit from one of the dealers. Route the vent line so that you can reach it while driving. A light puff into the vent line followed by putting your finger the end will get you up any steep hill as long as there is fuel in the tank. Cheap, simple, no actual modi...
- Thu Apr 18, 2019 6:07 pm
- Forum: General Discussion Forum
- Topic: Spindle body anti-shimmy
- Replies: 8
- Views: 4225
Re: Spindle body anti-shimmy
Looks like some thing you would use on a "T" nearing the end of its life.
- Thu Feb 21, 2019 7:13 am
- Forum: General Discussion Forum
- Topic: Venting rear diff
- Replies: 20
- Views: 8334
Re: Venting rear diff
I had a similar experience as Roy Stone. I saw a small bubble as I was removing the plug. Drilled the plug and installed a vent line that runs up to the frame. I also had thought of a vacum line when a rear axle seal started to leak but redoing the seal and lowering the fluid level has resolved that...
- Mon Feb 18, 2019 12:55 pm
- Forum: General Discussion Forum
- Topic: Steering column support bracket
- Replies: 6
- Views: 3439
Re: Steering column support bracket
I have 2 "T's" with wooden firewalls that I have towed many miles on a single axel unsprung trailer. I can see the steering wheel in my rear view mirror. The wheel really moves around. I think when you are driving these cars your hand or hands on the wheel really dampens this motion. Both cars now t...
- Fri Feb 15, 2019 10:55 pm
- Forum: General Discussion Forum
- Topic: Ever seen one of these broken
- Replies: 10
- Views: 5590
Re: Ever seen one of these broken
Torque tube not modified to accomodate a ball bearing 4th main