MTFCA Forum

Benji

Email sent

Benji

I thought about July of 1912 was when the riveted style started, and the adjustable was phased out?

Benji

I thought about July of 1912 was when the riveted style started, and the adjustable was phased out?

Benji

Thanks so much for that info! Im lost on anything before 1912 and after 1915/16. My buddy found it for me at hershey and from a quick pic sent by his wife I thought, "oh! A 1913 fender! I need one of those! I'll take it!" It wasnt until I got to see it up close I thought it may be earlier. But the r...

Benji

Thanks all, I reckon I wasnt that far off then.

Benji

Dollisdad wrote: ↑
Wed Mar 01, 2023 7:44 pm
Late 09-10

I added a few pics of the rivet pattern. I always thought they were "square" and not the V shaped like you see.

Benji

last pictures

Benji

more pictures..,,

Benji

more pictures

Benji

Evening all.

I have this rear fender that I though was originally a late 09 to 1910. But the rivet pattern has me thinking it may not be Ford at all? Looks about the same size as my 1913 rears. The eye fender iron clamp and the sheet metal bracket look like Ford. A little stumped.

Benji

emailed and sent a text about the axle

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

still for sale

Benji

Sent you an email

WillieT wrote: ↑
Sat Aug 13, 2022 9:22 pm
I’ll take it if it’s still available

Benji

Heres a lot of 26/27 door hinge parts. There are 2 matched hinges, and the rest as halves as seen. Asking $40 plus shipping to anywhere in the world. I accept Check, money order, and Friends and Family Paypal. My email is paleobenji@gmail.com for any questions and for my full contact info. Cheers Be...

Benji

some more pics

Benji

Too many steering wheels, and not enough cars for them! This is my last early wheel. Here is a one piece (meaning one joint as it being one piece of steam bent wood) steering wheel, that I believe were used on late 1912s to early 1914 before the 2 piece wood rims. Has a good Spider. The wood is soli...

Benji

some more pics

Benji

Too many steering wheels, and not enough cars for them! Here is a one piece (meaning one joint as it being one piece of steam bent wood) steering wheel, that I believe were used on late 1912s to early 1914 before the 2 piece wood rims. Has a good Spider. The wood is solid in places except for a coup...

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

still available

Benji

Howdy!

I'm currently awaiting a response from the first guy to message me. I will let you know if he passes.

Benji

1906jford wrote: ↑
Fri Aug 05, 2022 8:57 am
If the handle is still available i would like to buy it
Thanks Dave

Benji

PM replied too

tselliott wrote: ↑
Thu Aug 04, 2022 9:57 pm
I am interested in the steering wheel
PM sent

Benji

last picture

Benji

last few pics

Benji

Here is a 2 piece steering wheel, that I believe were used on late 1914s to 1919 before the larger composite wheels took over. The joints on this one is decent, but needs some regluing. Actual wood is solid, and not bad like it looks. There are some wood defects, that look like they were filled a lo...

Benji

some more pics

Benji

Too many steering wheels, and not enough cars for them! Here is a one piece (meaning one joint as it being one piece of steam bent wood) steering wheel, that I believe were used on late 1912s to early 1914 before the 2 piece wood rims. The joint on this one is decent, but needs some regluing. There ...

Benji

last few pics

Benji

Well, I need to actually go through all my stuff before I buy anything else. I found this buckey jack handle at hershey last year, thinking I didnt have one. I found I did buy one at some point in the past several years, and found it in my stoage closet where I keep my good part safe. So, this one i...

Benji

So, I went to learn to tell the difference as I didn't even know model A looked similar. And these are Model A, and have a 5/8" bore.

Sorry about that. Im already a bit lost on starter era, so if A stuff starts looking similar, then I'm a lost ball in high weeds it seems.

Benji

Heres a repro brass knob carb adjustment rod still in the plastic package (removed for photos). Asking $20 plus shipping to anywhere in the world. I accept Check, money order, and Friends and Family Paypal. My email is paleobenji@gmail.com for any questions and for my full contact info. Cheers Benji

Benji

last few pics

Benji

Heres my last hood former spare. Its been bent up a bit and needs straightened, but its solid. HAs some rust and light pitting in places, but should clean up fine Asking $65 plus shipping to anywhere in the world. I accept Check, money order. My email is paleobenji@gmail.com for any questions and fo...

Benji

still for sale

Benji

last couple pics

Benji

some more pics

Benji

Heres a spare 1915 hood former of mine. I found a complete one with firewall at Hershey last year, so this is surplus. It needs some work as seen. Hood rod holes is a bit worn out, and there may be a slight crack in that area, but its hard to tell. Going to need some hammer work on this one, but it ...

Benji

some more pics

Benji

Heres a alot of bendix parts I had sitting in the Evaporust. Some parts have some pitting, and there is one Im unsure if it can be used as it has pitting on the inside bore. I dont know much about the starter era stuff, so dont need these. Asking $25 plus shipping to anywhere in the world. I accept ...

Benji

some more pics

Benji

Heres a Holley 2 Screw Carb for rebuilding. Has a cracked bowl, and the float was replaced with a brass one thats broken loos. Also has a different type of valve. Mixture knob rod is bent a bit, and needs new springs and inner venturi clip. Asking $55 plus shipping to anywhere in the world. I accept...

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Still available

Benji

Thats interesting. Some pics I found on the forum (new and old), don't show the needle guide. I wonder if it's an earlier design?

I think ill keep the needle guide carb for the 13 runabout.

richc wrote: ↑
Tue Jul 19, 2022 5:28 pm
I have three 1913 Holley S carburetors, as well. All have the valve needle guide.

Rich C.

Benji

Pulled an unknown hub puller out of the evaporust bucket today. I'm unsure what it fits though. It's 2 7/8" diameter from the outside of the threads.

Benji

Anyone know about early carbs?

Benji

still for sale. Can bring to certain stops of the MTFCI tour this week!

Benji

still for sale. Can bring to certain stops of the MTFCI tour this week!

Benji

still for sale. Can bring to certain stops of the MTFCI tour this week!

Benji

still for sale. Can bring to the certain parts of the MTFCI tour this week!

Benji

more pics.

Benji

some more pics

Benji

Heres a fixer upper, but complete except for the running board mount. Suffers from the old split brass syndrome. Someone tried to fix it in the past. I was going to strip it apart, and redo the splits the correct way, but Ive had it for almost a decade, and you can see how far I got with it. The gen...

Benji

still for sale. Can bring to certain stops of the MTFCI tour this week!

Benji

last few pics

Benji

some more pics

Search found 370 matches