Search found 85 matches
- Tue Jan 23, 2024 8:35 am
- Forum: General Discussion Forum
- Topic: New Rims
- Replies: 3
- Views: 439
Re: New Rims
Steve Hood, Vintage Rims, Australia
- Mon Oct 30, 2023 3:59 pm
- Forum: General Discussion Forum
- Topic: Amp Meter discharge, but no charge?
- Replies: 39
- Views: 1541
Re: Amp Meter discharge, but no charge?
I have the exact same problem. New rebuilt generator from Langs, new VR from Jeff, new wiring and repro ammeter. Going down the road I get +5 but when I turn the headlights on it shows -10. Do I dare advance the 3rd brush any more?
- Sun Aug 20, 2023 8:55 am
- Forum: General Discussion Forum
- Topic: Thank-you Scott Conger
- Replies: 18
- Views: 1589
Thank-you Scott Conger
As many of you already know, replacing your float valve with one of Scott"s will make a huge difference in the performance of your T. I just replaced mine and Wow what a difference. My 26TT with Ruckstell, aux transmission and high speed ring gear in the rear end runs so much better. It will idle sl...
- Sat Jul 22, 2023 6:59 pm
- Forum: General Discussion Forum
- Topic: Fuel Problem?
- Replies: 14
- Views: 876
Re: Fuel Problem?
My 26TT does the same thing only on flat roads when the throttle is wide open. Backing off the throttle a little solves the problem but also slows you down. It has a rebuilt NH carb. Some days it runs like a dream. Guess I need to try one of Scott's valves.
- Fri Jul 07, 2023 8:38 am
- Forum: General Discussion Forum
- Topic: New split rims
- Replies: 11
- Views: 1024
Re: New split rims
I got a set from Steve and they fit great. It was an easy transaction and it only took eight days to get to Nebraska.
- Fri Apr 28, 2023 11:26 am
- Forum: General Discussion Forum
- Topic: TT Rearview Mirror
- Replies: 12
- Views: 1089
- Fri Apr 28, 2023 10:51 am
- Forum: General Discussion Forum
- Topic: TT Rearview Mirror
- Replies: 12
- Views: 1089
Re: TT Rearview Mirror
My 26TT had the bracket but no mirror. I bought a mirror from one of the vendors and I can see traffic behind me just fine. After cleaning everything up the bracket wanted to vibrate out too much so I added a small piece of tin to keep it from doing so.
- Mon Apr 03, 2023 6:57 pm
- Forum: General Discussion Forum
- Topic: Gunk
- Replies: 8
- Views: 930
Gunk
Getting ready to change oil for the second time in my 26TT with rebuilt engine. I removed the inspection cover to check the screen and magnet. It was full ( 2 tablespoons) of what looked like grease and felt like grease. The screen cleaned up easy with parts cleaner but the magnet took a lot of rubb...
- Fri Mar 17, 2023 6:32 pm
- Forum: General Discussion Forum
- Topic: New clincher rims from “Vintage rims “ in Australia.
- Replies: 6
- Views: 913
Re: New clincher rims from “Vintage rims “ in Australia.
I recently got two 21" split rims from Australia. He had them in stock and only took 8 days to reach Nebraska. Easy transaction and very pleased with the rims.
- Fri Mar 03, 2023 8:40 am
- Forum: Classifieds - Parts
- Topic: For Sale: Reconditioned Original Ford Starter Switch
- Replies: 14
- Views: 1445
Re: For Sale: Reconditioned Original Ford Starter Switch
I will take one of the later ones
Rod
Rod
- Fri Sep 30, 2022 8:45 am
- Forum: General Discussion Forum
- Topic: Free start
- Replies: 13
- Views: 1260
Free start
After driving my 26TT almost every day for 6 months I got my first free start. I am curious as to how often others get a free start.
- Sun Mar 13, 2022 7:31 pm
- Forum: Classifieds - Parts
- Topic: Four Demountable Rims Ready To Go SOLD
- Replies: 14
- Views: 2461
Re: Four Demountable Rims Ready To Go
What size?
- Wed Dec 15, 2021 8:54 am
- Forum: General Discussion Forum
- Topic: A $20 (or less!) DIY regulator, and other issues
- Replies: 240
- Views: 41164
Re: A $20 (or less!) DIY regulator, and other issues
I talked to John Reagan about a month ago. I don't know about a patent but he is bound by a non-compete agreement. But since Fun Projects is not making the regulator I wonder about any legalities. What about contacting Fun Projects and see if they are willing to sell, give, donate John's plans back ...
- Mon Oct 25, 2021 10:06 am
- Forum: General Discussion Forum
- Topic: John Regan
- Replies: 8
- Views: 1863
Re: John Regan
I tried to find a link to members but couldn't.
- Mon Oct 25, 2021 9:01 am
- Forum: General Discussion Forum
- Topic: John Regan
- Replies: 8
- Views: 1863
John Regan
Does anyone have current contact info for John Regan?
- Sun Oct 24, 2021 10:56 am
- Forum: General Discussion Forum
- Topic: Generator cutout
- Replies: 5
- Views: 1434
Generator cutout
Does anyone repair cutouts?
- Tue Sep 21, 2021 11:12 am
- Forum: Classifieds - Parts
- Topic: WTB generator cutout
- Replies: 2
- Views: 873
WTB generator cutout
WTB generator cutout. I know these are hard to come by but does someone have a spare or can tell me where I might find one.
- Wed Aug 11, 2021 4:46 pm
- Forum: Classifieds - Parts
- Topic: WTB TT Ruckstell shifter lock assembly
- Replies: 4
- Views: 1277
WTB TT Ruckstell shifter lock assembly
WTB TT Ruckstell shifter lock assembly. I really just need the housing as mine has a chunk missing out of the neck. I would prefer the early short style but either style will work. I will take the whole assembly if necessary.
- Mon Aug 09, 2021 9:00 am
- Forum: General Discussion Forum
- Topic: ammeter question
- Replies: 8
- Views: 1651
ammeter question
I had a new repro ammeter in my 26TT. With the third brush almost fully retarded it would read +10 while driving. I just acquired an older ammeter (don't know how old it is) and it seemed to match the looks of the interior better so I installed it. Now while driving it reads +20 and not running and ...
- Sat Jun 05, 2021 8:49 am
- Forum: Classifieds - Parts
- Topic: WTB starting crank
- Replies: 3
- Views: 1206
WTB starting crank
WTB starting crank for 26TT
- Wed May 19, 2021 8:59 am
- Forum: General Discussion Forum
- Topic: Fuel line
- Replies: 10
- Views: 2344
Re: Fuel line
I am confused. I thought the fuel line should run as straight as possible without any big dips or humps in it to afford flow problems. I routed mine next to the hogshead because it seemed there would be a longer smoother bend than routing next to the frame. Now I am wondering if I did it wrong. I us...
- Wed May 05, 2021 7:54 pm
- Forum: General Discussion Forum
- Topic: Hogshead
- Replies: 8
- Views: 2200
Re: Hogshead
When we removed it yesterday another chunk fell off below the starter hole on the corner bolt hole. Yes it has hex head bolts and that one could have been tightened to much. I have another one on the way.
- Mon May 03, 2021 5:26 pm
- Forum: General Discussion Forum
- Topic: Hogshead
- Replies: 8
- Views: 2200
Hogshead
Removed inspection cover to adjust clutch fingers and a chunck of the hogshead fell off. Any fix or just get a new hogshead?
- Mon Apr 26, 2021 9:53 pm
- Forum: General Discussion Forum
- Topic: 26TT first start
- Replies: 8
- Views: 1926
Re: 26TT first start
The day grandpa gave me his 26TT (circa 1960)
- Mon Apr 26, 2021 9:48 pm
- Forum: General Discussion Forum
- Topic: 26TT first start
- Replies: 8
- Views: 1926
- Mon Apr 26, 2021 9:27 pm
- Forum: General Discussion Forum
- Topic: 26TT first start
- Replies: 8
- Views: 1926
Re: 26TT first start
I knew the timing and wiring was OK because I had checked it several times. So I called Ross Lilliker who had rebuilt my engine and asked for his advice. He suggested a carb float check. I removed the plug from the bottom of the carb and let gas run out for 30 seconds replaced the plug and started i...
- Fri Apr 23, 2021 5:56 pm
- Forum: General Discussion Forum
- Topic: 26TT first start
- Replies: 8
- Views: 1926
26TT first start
After almost 2 years of restoration I decided to start my 26TT. It took awhile and had to really rich the carb to get it started. It runs fine at idle but when the throttle is advanced it spits, sputters and backfires. Advancing the spark doesn't seems to help much. I tried lean until it almost died...
- Wed Apr 21, 2021 3:32 pm
- Forum: Classifieds - Parts
- Topic: WTB ammeter
- Replies: 1
- Views: 733
WTB ammeter
WTB original or good reliable (not repro) ammeter for 26-27 large switch plate.20210421_142328.jpg
- Wed Apr 21, 2021 8:44 am
- Forum: General Discussion Forum
- Topic: Another ammeter question
- Replies: 9
- Views: 1967
Re: Another ammeter question
My switch plate is like the second picture and i have a repro ammeter. If the ammeter is Model A this explains the need to reverse the wires. I did reverse the wires and it now reads correctly. Thanks for the help.
.
.
- Mon Apr 19, 2021 4:32 pm
- Forum: General Discussion Forum
- Topic: Another ammeter question
- Replies: 9
- Views: 1967
Another ammeter question
I wired my 26TT according to Ron Patterson's diagram. It is 6v negative ground with a voltage regulator. It is not running yet but when I turn on the lights the ammeter pegs to the right (charge). What do I do?
- Thu Mar 18, 2021 8:43 am
- Forum: General Discussion Forum
- Topic: air filter
- Replies: 6
- Views: 1404
air filter
After 13 months I got my 26TT engine back from Lillikers. With the help of a young friend we are starting to put things back together. When we put the carb on he says "No air filter?" I would like the forum members opinions on air filters.
- Tue Dec 15, 2020 8:45 am
- Forum: General Discussion Forum
- Topic: chicago transmission and oil
- Replies: 1
- Views: 864
chicago transmission and oil
While waiting to get my engine and transmission back from Lillikers I was wondering what kind of oil and how much does a Chicago transmission take?
- Sun Oct 18, 2020 8:52 am
- Forum: General Discussion Forum
- Topic: Model t as a daily in the early 40s?
- Replies: 50
- Views: 6167
Re: Model t as a daily in the early 40s?
I have my Grandpa's 26TT which I am presently restoring. It had a 47 license plate on it so I assumed it was driven until then.
- Sun Sep 13, 2020 8:43 am
- Forum: General Discussion Forum
- Topic: HALL SCOTT "Ruckstell" early BRASS SHIFT LOCK BODY
- Replies: 5
- Views: 1862
Re: HALL SCOTT "Ruckstell" early BRASS SHIFT LOCK BODY
I have a spare brass one but am using a cast iron one,
- Mon Jun 22, 2020 5:42 pm
- Forum: Classifieds - Parts
- Topic: WTB TT door handles
- Replies: 1
- Views: 1273
WTB TT door handles
WTB original TT outside door handles. I want the L type as my latches are stiff. I don't like the repros.
- Sun Jun 21, 2020 10:57 am
- Forum: General Discussion Forum
- Topic: TT top covering
- Replies: 7
- Views: 2733
Re: TT top covering
Was the top covering the standard material? I have read that maybe convertible top material is better than the standard Cobra.
- Sun Jun 21, 2020 10:54 am
- Forum: General Discussion Forum
- Topic: TT top covering
- Replies: 7
- Views: 2733
Re: TT top covering
Thanks Brad. With this and your post on the seats I should be able to do mine in the near future
- Sun Jun 21, 2020 9:02 am
- Forum: General Discussion Forum
- Topic: TT top covering
- Replies: 7
- Views: 2733
TT top covering
Not to long ago, someone posted pictures on redoing a TT top, I searched but can't seem to find it. Can anyone remember the name of the post? TT top gets me nowhere.
- Fri Jun 19, 2020 6:58 pm
- Forum: General Discussion Forum
- Topic: TT glass
- Replies: 1
- Views: 1298
TT glass
I am getting ready to put glass in my 26TT closed cab. I have seen posted that it is best to take the windshield frame to a glass place and let them install it. What about the door and back window? Does anyone have the dimensions for these? I would like to pick it all up at one time
- Mon Jun 15, 2020 8:38 am
- Forum: General Discussion Forum
- Topic: Calimer's Wheel Shop
- Replies: 9
- Views: 3772
Re: Calimer's Wheel Shop
I am also very happy with the results. Had all four of my 26TT wheels done. I took about 7 months.
- Mon Jun 08, 2020 6:40 pm
- Forum: General Discussion Forum
- Topic: TT rear end
- Replies: 8
- Views: 2993
TT rear end
What is the plug on top of the end cap for? Do you put some oil in there also?
- Sun May 31, 2020 8:40 am
- Forum: General Discussion Forum
- Topic: 21" Split Rims
- Replies: 17
- Views: 5925
Re: 21" Split Rims
Good luck getting ahold of them. I e-mailed and called several times to no avail. I just repaired my original rims.
- Tue May 19, 2020 8:47 am
- Forum: Classifieds - Parts
- Topic: WTB TT small differential housing
- Replies: 7
- Views: 2939
Re: WTB TT small differential housing
After I posted I realized I should have been more specific but Adam immediately contacted me and had the right part. It was P1006.
- Sat May 16, 2020 4:46 pm
- Forum: Classifieds - Parts
- Topic: WTB TT small differential housing
- Replies: 7
- Views: 2939
WTB TT small differential housing
WTB TT small differential housing
- Sun May 10, 2020 8:45 am
- Forum: General Discussion Forum
- Topic: TT high speed ring gear
- Replies: 2
- Views: 1535
Re: TT high speed ring gear
Yes, this is the guy. Thank-you
- Sat May 09, 2020 12:12 pm
- Forum: General Discussion Forum
- Topic: TT high speed ring gear
- Replies: 2
- Views: 1535
TT high speed ring gear
Can someone tell me the name of the guy who makes the TT high speed ring gear sets? I seem to have lost his name and e-mail. His name was Mike.
- Fri May 01, 2020 12:38 pm
- Forum: Classifieds - Parts
- Topic: WTB TT high speed ring gear
- Replies: 1
- Views: 1363
WTB TT high speed ring gear
WTB TT high speed ring gear. I missed out on Chaffin's last week.
- Fri May 01, 2020 12:36 pm
- Forum: Classifieds - Parts
- Topic: WTB 26/27 switch
- Replies: 1
- Views: 1257
WTB 26/27 switch
WTB 26/27 ignition switch or all the guts to repair mine
- Sun Apr 19, 2020 6:06 pm
- Forum: Classifieds - Parts
- Topic: WTB TT door latch
- Replies: 0
- Views: 1069
WTB TT door latch
WTB 2 TT door latches and handles
- Fri Apr 17, 2020 7:11 pm
- Forum: General Discussion Forum
- Topic: TT door latch
- Replies: 1
- Views: 1203
TT door latch
How do you take this latch apart or can it be done? I see they sell the internal parts (springs etc) but I can't figure out it comes apart. It looks like it is welded together.
- Wed Apr 08, 2020 8:43 am
- Forum: Classifieds - Parts
- Topic: WTB TT Ruckstell bronze thrust plate
- Replies: 3
- Views: 1956
WTB TT Ruckstell bronze thrust plate
WtB TT Ruckstell bronze thrust plate (P1002-A)
- Sat Mar 28, 2020 5:56 pm
- Forum: General Discussion Forum
- Topic: TT firewall
- Replies: 1
- Views: 1349
TT firewall
When cleaning the firewall on my 26TT I noticed small rivets (now mostly missing) on the outer edge. What did they hold in place and was it on the outside or inside of the lip?
- Sat Feb 15, 2020 9:41 am
- Forum: General Discussion Forum
- Topic: TT ring gear
- Replies: 1
- Views: 1419
TT ring gear
Can someone tell me where I can get a ring gear made for my 26TT? It is a 31 tooth gear and worn out.
- Sat Jan 25, 2020 8:47 am
- Forum: Classifieds - Parts
- Topic: WTB ring gear
- Replies: 0
- Views: 1111
WTB ring gear
WTB good useable 31 tooth ring gear for 26TT
- Sun Jan 05, 2020 3:47 pm
- Forum: Classifieds - Parts
- Topic: WTB headlight buckets
- Replies: 1
- Views: 1429
WTB headlight buckets
WTB 2 good headlight buckets with long curved mounting bolt for 26TT
- Sun Jan 05, 2020 3:44 pm
- Forum: Classifieds - Parts
- Topic: WTB steering quadrant
- Replies: 0
- Views: 978
WTB steering quadrant
WTB steel steering quadrant with good deep notches.
- Fri Dec 06, 2019 8:54 am
- Forum: Classifieds - Parts
- Topic: FOR SALE: MODEL TT 20 INCH RIM, TWO LOCK RINGS, and WHEEL BOLTS AND LUGS
- Replies: 9
- Views: 4282
Re: FOR SALE: MODEL TT 20 INCH RIM, TWO LOCK RINGS, and WHEEL BOLTS AND LUGS
Would you sell just the rim?
- Mon Dec 02, 2019 5:34 pm
- Forum: General Discussion Forum
- Topic: TT rims
- Replies: 1
- Views: 1463
TT rims
I bought these 20" rims to replace my rusted out ones but they are different. Do I need to add something or modify them for the valve stem? I don't think the valve stem should just stick up through the oval hole in the rim
- Sun Oct 27, 2019 8:45 am
- Forum: General Discussion Forum
- Topic: Sectioning rims
- Replies: 4
- Views: 2480
Re: Sectioning rims
Thanks. That reaffirms my idea.
- Sat Oct 26, 2019 12:21 pm
- Forum: General Discussion Forum
- Topic: Sectioning rims
- Replies: 4
- Views: 2480
Sectioning rims
The rear rims on my TT are almost completely rusted away. I was able to find a couple 20" rims but one has a section that has several holes in it. I heard a couple of guys mention sectioning them. Does these mean cutting out the bad area and welding a new piece in? Of course it is the flat area and ...
- Sat Oct 19, 2019 12:29 pm
- Forum: Classifieds - Parts
- Topic: Wanted 20" rim
- Replies: 1
- Views: 1283
Wanted 20" rim
Wanted 1 or 2 20" rims for rear of 26TT
- Sat Sep 28, 2019 8:45 am
- Forum: General Discussion Forum
- Topic: brake pedal movement
- Replies: 9
- Views: 3973
Re: brake pedal movement
By loosening the transmission band will that allow the pedal to extend further out of the transmission? If so, then the pedal can be pressed further down.
- Fri Sep 27, 2019 8:52 am
- Forum: General Discussion Forum
- Topic: brake pedal movement
- Replies: 9
- Views: 3973
brake pedal movement
As I am disassembling my 26TT I am trying to understand how everything works, I disconnected the transmission band so I could remove the brake pedal. I want to weld a tab on the bottom to operate the auxillary outside brakes. The brake pedal does not move very far when pressed which I see is normal....
- Sun Sep 15, 2019 6:20 pm
- Forum: General Discussion Forum
- Topic: More TT brakes
- Replies: 15
- Views: 5436
Re: More TT brakes
Thank-you Henry. After looking things over this morning, I think I can weld an ear on the bottom of the brake pedal and use part of the homemade assembly to operate the outside band. That is unless there is a better way. Earlier you mentioned obtaining a brake pedal, linkage and equalizer. If this i...
- Sun Sep 15, 2019 4:16 pm
- Forum: General Discussion Forum
- Topic: More TT brakes
- Replies: 15
- Views: 5436
Re: More TT brakes
After rereading our last thread I hope I understand everything. If I remove the home made apparatus and connect the outside band to the hand lever that leaves the brake pedal to run the transmission brake, Then I have two independent braking systems right? In which case I don't need the internal bra...
- Sun Sep 15, 2019 9:33 am
- Forum: General Discussion Forum
- Topic: More TT brakes
- Replies: 15
- Views: 5436
Re: More TT brakes
This was my Grandpa's TT and he was a fairly tall guy but not handicapped. He drove it from Colorado to California and back twice. My Dad said it has hauled more corn, coal and hogs than I will ever see. Don't know why it was set-up this way but I want to restore it back to original or close with an...
- Fri Sep 13, 2019 9:30 pm
- Forum: General Discussion Forum
- Topic: More TT brakes
- Replies: 15
- Views: 5436
Re: More TT brakes
In our last thread you explained the left pedal, transmission brake and hand brake. I think that is what I have. But in my set-up does the right pedal also operate the transmission brake? Also could someone post a picture of the standard brake pedal and the brake shoe set-up.
- Fri Sep 13, 2019 10:03 am
- Forum: General Discussion Forum
- Topic: More TT brakes
- Replies: 15
- Views: 5436
More TT brakes
IMG_20190905_141053218.jpg I got the cab off so I could get some deceit pictures of my brake set-up. The hand brake is hooked the front U-shaped thing-a-ma-jig. The middle and rear are hooked together and run by the small black lever (looks homemade). The brake rods and cable weren't connected to a...
- Sun Sep 01, 2019 10:22 pm
- Forum: General Discussion Forum
- Topic: TT brakes
- Replies: 18
- Views: 6232
Re: TT brakes
Thanks for all the advice. I will check it out in a couple of days when I have time. I see I will have to add traditional brakes so I will need all the parts. I am in Lincoln right now but am leaving in the morning. I. will try to get a hold of Mike the next trip.
- Sat Aug 31, 2019 10:47 pm
- Forum: General Discussion Forum
- Topic: TT brakes
- Replies: 18
- Views: 6232
Re: TT brakes
That answers that question but brings up more. Forward pedal? I thought the left was the clutch, middle reverse and right brake. How much is the tuition for model T 101?
- Sat Aug 31, 2019 6:26 pm
- Forum: General Discussion Forum
- Topic: TT brakes
- Replies: 18
- Views: 6232
Re: TT brakes
I am new to this model T thing and the lingo. So what is the transmission brake?
- Fri Aug 30, 2019 8:34 pm
- Forum: General Discussion Forum
- Topic: TT brakes
- Replies: 18
- Views: 6232
Re: TT brakes
I am away from home right now but will look when I get home. There are no brake shoes inside the drum.
- Fri Aug 30, 2019 1:25 pm
- Forum: General Discussion Forum
- Topic: TT brakes
- Replies: 18
- Views: 6232
TT brakes
What kind of brakes do I. have? There is just one brake shoe that goes almost all the way around. It compress around the outside of the brake drum instead of normal brakes that have 2 shoes that expand outward contacting the inside of the brake drum.
- Sun Aug 25, 2019 4:43 pm
- Forum: General Discussion Forum
- Topic: McLaren rims
- Replies: 6
- Views: 3323
McLaren rims
Has anyone tried to order McLaren rims recently? They don't answer the phone or respond to e-mail. Just wondering if they are out of business.
- Wed Aug 21, 2019 5:11 pm
- Forum: Classifieds - Parts
- Topic: Wanted
- Replies: 2
- Views: 1902
Wanted
Wanted rear brake drum for 26TT
- Wed Aug 21, 2019 5:08 pm
- Forum: General Discussion Forum
- Topic: TT rear end
- Replies: 2
- Views: 1649
TT rear end
My 26TT rear end is stamped P1001 Hall Scott. All I can find is that Ruckstell worked for Hall Scott so is this a Ruckstell rear end?
- Wed Aug 14, 2019 8:42 am
- Forum: General Discussion Forum
- Topic: TT rear hubs
- Replies: 2
- Views: 1628
TT rear hubs
The threads on my 26TT rear hubs are pretty boogered up. Is there a tool or a way to fix them or do I just go without hub caps? I bought a hub puller before I got the truck home in anticipation of needing it to pull the rear wheels. The wheels came right off so didn't need it. It is a good thing bec...
- Wed Aug 07, 2019 4:32 pm
- Forum: General Discussion Forum
- Topic: All TT owners
- Replies: 0
- Views: 1102
All TT owners
I am need of a pair of 20" rims with or without the lock rings. If you have any for sale let me know.
- Mon Aug 05, 2019 6:14 pm
- Forum: General Discussion Forum
- Topic: Grandpa's TT
- Replies: 2
- Views: 1777
Re: Grandpa's TT
No I did not get to ride in it just drove it a million miles sitting in one place. It has a 1947 license plate on it which is 3 years before I was born. It came with a spare engine (which is all totally torn down) I assume this was the original engine. It has a two speed rear end and a third lever t...
- Mon Aug 05, 2019 3:36 pm
- Forum: General Discussion Forum
- Topic: Grandpa's TT
- Replies: 2
- Views: 1777
Grandpa's TT
After almost 60 years I got her home to begin restoration. I am a novice and will need a lot of advice. I have been reading the forum for about 2 months now and have picked up a lot of tips. There will be more questions as the process develops. I got the wheels off and will clean them up before send...
- Mon Aug 05, 2019 8:49 am
- Forum: General Discussion Forum
- Topic: remove rear brake drum
- Replies: 11
- Views: 4785
Re: remove rear brake drum
What George said. I need the drum off so I can get the wheel respoked. The wheel is off and I didn't even have to use a puller. Thanks for the info will keep trying.
- Sat Aug 03, 2019 12:57 pm
- Forum: General Discussion Forum
- Topic: remove rear brake drum
- Replies: 11
- Views: 4785
remove rear brake drum
I can't remove the brake drum from the rear hub of my 26 TT, I am new at this. The other one came off easy. I have tried WD40 and a hammer then a bigger hammer, some heat but it won't budge. HELP.
- Sat Aug 03, 2019 12:41 pm
- Forum: Classifieds - Parts
- Topic: wanted
- Replies: 1
- Views: 1615
wanted
wtb two 20" rims for 26 TT
- Sun Jun 23, 2019 9:09 am
- Forum: General Discussion Forum
- Topic: hauling tt truck
- Replies: 6
- Views: 3262
Re: hauling tt truck
Thanks for the information. I didn't know if hauling it on the spokes would do any damage. I know I will have to rebuild the wheels anyway.
- Sat Jun 22, 2019 4:50 pm
- Forum: General Discussion Forum
- Topic: hauling tt truck
- Replies: 6
- Views: 3262
hauling tt truck
My grandpa gave me his 1926 tt truck almost 60 years ago but never had a place to store it so I could restore it until now. I need to haul it 400 miles. It has no tires or rims just sitting on the wooden spokes. Any suggestions?