Search found 729 matches
- Mon Jul 25, 2022 2:04 pm
- Forum: General Discussion Forum
- Topic: Possible run of spare tire carriers.
- Replies: 9
- Views: 2352
Re: Possible run of spare tire carriers.
I would take a set
- Fri Sep 17, 2021 6:09 pm
- Forum: Classifieds - Parts
- Topic: Stromberg adjuster wells - sold out pending payment(s)
- Replies: 2
- Views: 908
- Sat Sep 04, 2021 12:02 pm
- Forum: General Discussion Forum
- Topic: World War 1 Model Ts
- Replies: 57
- Views: 8204
Re: World War 1 Model Ts
Now that’s a first. Is that one Carburator shared between the 2 engines?
- Fri Sep 03, 2021 12:31 am
- Forum: General Discussion Forum
- Topic: 12 Volt Geared Starter
- Replies: 28
- Views: 5967
Re: 12 Volt Geared Starter
I have spread my nickels around all the vendors and then some. Some specialty items are better sourced from the manufacturer than the vendors. Tech support comes to mind, which is far better from the source. I’m not a cheap a## by no means but when you are sourcing parts and pieces it is far better ...
- Thu Sep 02, 2021 8:38 pm
- Forum: General Discussion Forum
- Topic: 12 Volt Geared Starter
- Replies: 28
- Views: 5967
Re: 12 Volt Geared Starter
I am running 4 of these British starters
2 on t’s and 2 on a’s
This starter coupled with a good battery and you are good to go for a while. Bicker all you want, I like drivability.
2 on t’s and 2 on a’s
This starter coupled with a good battery and you are good to go for a while. Bicker all you want, I like drivability.
- Tue Aug 31, 2021 7:35 pm
- Forum: General Discussion Forum
- Topic: World War 1 Model Ts
- Replies: 57
- Views: 8204
Re: World War 1 Model Ts
20160920_214015.jpg Had one it's made in america my great uncle was a supply Sgt in ww1 he had two bodies he bought army surplus tucked under his front porch my dad got them and put one together here are pictures Allen, that is supposed to be a M&P body. The 2nd one is in the Marine Corp museum in ...
- Mon Aug 30, 2021 9:49 pm
- Forum: General Discussion Forum
- Topic: Tony Wiltshire - RIP
- Replies: 27
- Views: 5749
Re: Tony Wiltshire - RIP
I just met him at the homecoming when they rode out to the Salty Dog museum in Shandon, OH. It was pouring down rain when everyone pulled in. I couldnt get over all the details on his speedster. From a distance it looked like a plain jane speedster, but a closer look showed lots of nice details. I a...
- Mon Aug 09, 2021 10:35 am
- Forum: General Discussion Forum
- Topic: Rear end
- Replies: 17
- Views: 2497
Re: Rear end
The axle broke on the differential side of the Hyatt bearing? Is this common? The stress is on the wheel side of the Hyatt.
- Fri Aug 06, 2021 12:03 pm
- Forum: Classifieds - Parts
- Topic: Wanted
- Replies: 3
- Views: 1358
Re: Wanted
yea, but this only means he will be offering more styles later on. So hang on!!
- Tue Aug 03, 2021 7:25 pm
- Forum: General Discussion Forum
- Topic: Rear End Oil
- Replies: 27
- Views: 4372
Re: Rear End Oil
I pack my wheel bearings with 600 weight
- Tue Aug 03, 2021 7:23 pm
- Forum: General Discussion Forum
- Topic: Scat Crankshafts
- Replies: 9
- Views: 2187
Re: Scat Crankshafts
Like all hobbies, need to think in advance and get when available. Anything in this hobby and others. I have a scat on order from the next batch just to stash back for my next build
- Tue Aug 03, 2021 7:16 pm
- Forum: General Discussion Forum
- Topic: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?
- Replies: 50
- Views: 7000
Re: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?
Hard drive space is cheap and easy. Don’t need a commercial server or rented cloud space to store all the files. I stated previously I would have the papers scanned and even return them to the owner to get this going. I do not want profit for this, as I have a full time business and this is just a h...
- Tue Aug 03, 2021 7:10 pm
- Forum: General Discussion Forum
- Topic: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?
- Replies: 50
- Views: 7000
Re: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?
All you need to do is take them and have them scanned high resolution and put the files on a memory stick. The files can be zipped up and emailed to anyone who wants a copy. It is that easy. If files turn out too large to email pay 20$ for a memory stick and charge for this plus ship. Still cheap an...
- Mon Aug 02, 2021 8:31 am
- Forum: General Discussion Forum
- Topic: Rear End Oil
- Replies: 27
- Views: 4372
Re: Rear End Oil
I would also like to hear some reasons why to not use a more modern viscosity gear lube. Seal leakage? I don’t want to hear because Henry did it that way, oils have come a long way since then. I run 90 synthetic in my model A housing without problems at all.
Thanks
Thanks
- Thu Jul 29, 2021 6:27 pm
- Forum: Classifieds - Parts
- Topic: Stromberg carb kit fs
- Replies: 4
- Views: 1291
Re: Stromberg carb kit fs
That pink piece is the accelerator pump
- Tue Jul 27, 2021 9:25 am
- Forum: Classifieds - Parts
- Topic: Help needed finding a ignition switch
- Replies: 8
- Views: 2016
Re: Help needed finding a ignition switch
Ben will want a core to rebuild
Anything will do, but he wants a good pot metal center that is not broken
Anything will do, but he wants a good pot metal center that is not broken
- Fri Jul 23, 2021 3:02 pm
- Forum: General Discussion Forum
- Topic: "Gypsy" side curtains, awesome.
- Replies: 11
- Views: 2137
Re: "Gypsy" side curtains, awesome.
John,
can you post a pic of the inside of the gypsy curtains, how they attach to the door?
thanks
can you post a pic of the inside of the gypsy curtains, how they attach to the door?
thanks
- Thu Jul 22, 2021 8:01 am
- Forum: General Discussion Forum
- Topic: New to Hershey
- Replies: 18
- Views: 2907
Re: New to Hershey
I know the crab cake vendor well!!
- Tue Jul 20, 2021 3:37 pm
- Forum: General Discussion Forum
- Topic: Coil Test Tube Ball Bearing Thingy
- Replies: 11
- Views: 2036
Re: Coil Test Tube Ball Bearing Thingy
Got some things to look for at Hershey.
- Mon Jul 19, 2021 8:06 pm
- Forum: General Discussion Forum
- Topic: Coil Test Tube Ball Bearing Thingy
- Replies: 11
- Views: 2036
Coil Test Tube Ball Bearing Thingy
Somewhere I read the article on how to build this and cannot find it now. I saw one in action at the homecoming and didnt take time to ask about it. For some reason I want to make or purchase one. Anyone have any leads? I dont know the correct name of the thing to do a search. Thanks in advance. PS,...
- Sat Jul 17, 2021 10:44 am
- Forum: General Discussion Forum
- Topic: Installing Rajo oil level indicator
- Replies: 12
- Views: 2366
Re: Installing Rajo oil level indicator
Is the float in a bind? May need tweaking
- Sat Jul 17, 2021 10:42 am
- Forum: General Discussion Forum
- Topic: Presto-Magico...ugly duckling to a beautiful swan
- Replies: 2
- Views: 1388
Re: Presto-Magico...ugly duckling to a beautiful swan
Scott
How is the shaft attached to the head? Press fit?
How is the shaft attached to the head? Press fit?
- Wed Jul 14, 2021 12:31 pm
- Forum: General Discussion Forum
- Topic: Radiator cap spinning while driving.
- Replies: 25
- Views: 3534
Re: Radiator cap spinning while driving.
sorry, but that is funnyJohn Codman wrote: ↑Wed Jul 14, 2021 9:48 amYou could move South of the equator; the Coriolis effect would then cause the cap to tighten.
- Sat Jul 10, 2021 5:42 pm
- Forum: General Discussion Forum
- Topic: Photo of the day
- Replies: 5
- Views: 1583
Re: Photo of the day
Cleaning the container out behind the machine shop. All have major issues and going to scrap. Major issues
- Sat Jul 10, 2021 3:23 pm
- Forum: General Discussion Forum
- Topic: Photo of the day
- Replies: 5
- Views: 1583
- Thu Jul 08, 2021 7:37 pm
- Forum: Classifieds - Parts
- Topic: Hayes Chevy 490 rim / superior K wheel rim
- Replies: 11
- Views: 1937
Re: Hayes Chevy 490 rim / superior K wheel rim
That’s huge
- Thu Jul 08, 2021 2:32 pm
- Forum: Classifieds - Parts
- Topic: WTB 23-27 Windshield frame cones
- Replies: 0
- Views: 639
WTB 23-27 Windshield frame cones
I need a set of 4 originals with some patina if anyone has any
thanks
thanks
- Thu Jul 08, 2021 2:23 pm
- Forum: Classifieds - Parts
- Topic: Hayes Chevy 490 rim / superior K wheel rim
- Replies: 11
- Views: 1937
Re: Hayes Chevy 490 rim / superior K wheel rim
So this can be modified to use as a 21" T rim?
sent you a email Brian
sent you a email Brian
- Wed Jun 30, 2021 7:57 am
- Forum: General Discussion Forum
- Topic: Canning Model T parts
- Replies: 10
- Views: 2458
Re: Canning Model T parts
Someone’s time capsule
And those lug nuts have great patina
And those lug nuts have great patina
- Tue Jun 29, 2021 1:48 pm
- Forum: General Discussion Forum
- Topic: First Stromberg OF needle fresh off of assembly jig - New Pix, New Needle
- Replies: 23
- Views: 3312
Re: First Stromberg OF needle fresh off of assembly jig
Are the outer rings coming next?
Put me in for a couple sets when you get them finished, the needles I mean
Put me in for a couple sets when you get them finished, the needles I mean
- Tue Jun 29, 2021 12:03 pm
- Forum: General Discussion Forum
- Topic: First Stromberg OF needle fresh off of assembly jig - New Pix, New Needle
- Replies: 23
- Views: 3312
Re: First Stromberg OF needle fresh off of assembly jig
And the longer needle shouldn’t be a problem?
- Tue Jun 29, 2021 11:35 am
- Forum: General Discussion Forum
- Topic: First Stromberg OF needle fresh off of assembly jig - New Pix, New Needle
- Replies: 23
- Views: 3312
Re: First Stromberg OF needle fresh off of assembly jig
Cool, very nice.
Making more?
Making more?
- Tue Jun 29, 2021 7:59 am
- Forum: General Discussion Forum
- Topic: This weekends project (touring to pick up)
- Replies: 58
- Views: 6310
Re: This weekends project
I like it. Are you going to paint or varnish?
- Tue Jun 22, 2021 4:40 pm
- Forum: General Discussion Forum
- Topic: Metal Polish
- Replies: 16
- Views: 2995
Re: Metal Polish
https://www.amazon.com/Quick-Glo-Chrome-Cleaner-ouces/dp/B008ZRHAEE/ref=asc_df_B008ZRHAEE/?tag=hyprod-20&linkCode=df0&hvadid=167151917164&hvpos=&hvnetw=g&hvrand=2781206234261660171&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1023972&hvtargid=pla-308959450725&psc=1 Jay Leno approved S...
- Fri Jun 18, 2021 7:07 am
- Forum: General Discussion Forum
- Topic: Shout out for Dan McEachern
- Replies: 4
- Views: 1551
Re: Shout out for Dan McEachern
All I know is Dan makes some nice parts.
- Thu Jun 17, 2021 8:55 pm
- Forum: General Discussion Forum
- Topic: I Really Like These Bohlen “Solid” Brass Aftermarket Side View Mirrors
- Replies: 14
- Views: 3136
Re: I Really Like These “Solid” Brass Aftermarket Side View Mirrors
I have one of his black mirrors and haven’t mounted it yet. It looks sturdy
- Wed Jun 16, 2021 10:53 pm
- Forum: OT - Off topic
- Topic: Took a ride today
- Replies: 17
- Views: 3508
Re: Took a ride today
I want that lamp and all I was allowed to get was the Christmas ornament.
- Wed Jun 16, 2021 8:49 am
- Forum: General Discussion Forum
- Topic: Miller head update
- Replies: 54
- Views: 8587
Re: Miller head update
Tom
How soon till finished product?
How soon till finished product?
- Wed Jun 16, 2021 6:06 am
- Forum: OT - Off topic
- Topic: Took a ride today
- Replies: 17
- Views: 3508
Re: Took a ride today
John
I love trench art. I have a few pieces I picked up over the years. It’s nice you have a piece from a family member. My wife draws the line with lamps though!
I love trench art. I have a few pieces I picked up over the years. It’s nice you have a piece from a family member. My wife draws the line with lamps though!
- Tue Jun 15, 2021 5:05 pm
- Forum: General Discussion Forum
- Topic: Homecoming
- Replies: 32
- Views: 6526
Re: Homecoming
I will be at Ron’s machine shop/ salty dog museum Friday helping out when the tour stops by.
- Mon Jun 14, 2021 8:57 pm
- Forum: General Discussion Forum
- Topic: Pickup bed wood floor question
- Replies: 9
- Views: 2263
Re: Pickup bed wood floor question
Your car doesn't need oak. Ford used Southern Yellow Pine, and it is painted black to be correct. Larry, I like the yellow pine idea better for none other than it is half the weight of oak. This metal bed is heavy with the oak boards. Making the floorboards is not an issue as we have a sawmill and ...
- Sun Jun 13, 2021 1:21 pm
- Forum: General Discussion Forum
- Topic: Pickup bed wood floor question
- Replies: 9
- Views: 2263
Re: Pickup bed wood floor question
Larry
I don’t know that answer myself and I am using the oak kit from the vendors. I didn’t measure the thickness of what I have. I was going to mill my planks but the kit was thrown in the deal on the metal parts
Hank
I never get the chance with your wife cooking all the time.
I don’t know that answer myself and I am using the oak kit from the vendors. I didn’t measure the thickness of what I have. I was going to mill my planks but the kit was thrown in the deal on the metal parts
Hank
I never get the chance with your wife cooking all the time.
- Sun Jun 13, 2021 8:52 am
- Forum: General Discussion Forum
- Topic: Pickup bed wood floor question
- Replies: 9
- Views: 2263
Re: Pickup bed wood floor question
Dan
You are a lifesaver!
Thanks a bunch, that is perfect. I owe you lunch sometime if we meet
You are a lifesaver!
Thanks a bunch, that is perfect. I owe you lunch sometime if we meet
- Sat Jun 12, 2021 9:57 pm
- Forum: General Discussion Forum
- Topic: Pickup bed wood floor question
- Replies: 9
- Views: 2263
Pickup bed wood floor question
714837E6-3605-4082-873E-FF9902F4C356.jpeg D37C4106-394C-42C6-B887-DDA871BEDAF8.jpeg Trying to find a layout of how the wood bed floor is assembled and bolted in. I assume it will be easier while the bed is on saw horses. The wood kit is cut for the battery hatch so what supports the planks that are...
- Fri Jun 11, 2021 9:30 pm
- Forum: General Discussion Forum
- Topic: Homecoming
- Replies: 32
- Views: 6526
Re: Homecoming
No one on the forum is going?
- Fri Jun 11, 2021 3:26 pm
- Forum: General Discussion Forum
- Topic: Homecoming
- Replies: 32
- Views: 6526
Homecoming
Who is going to the homecoming next weekend?
- Fri Jun 11, 2021 3:06 pm
- Forum: General Discussion Forum
- Topic: Just starting
- Replies: 11
- Views: 2547
Re: Just starting
Pictures please
- Thu Jun 10, 2021 3:25 pm
- Forum: General Discussion Forum
- Topic: Transmission Rebuild by Kohnke Rebabbitting
- Replies: 32
- Views: 11163
Re: Transmission Rebuild by Kohnke Rebabbitting
Reason for question is running while performing tasks such as tuning on carb, timing, and such.
- Thu Jun 10, 2021 10:27 am
- Forum: General Discussion Forum
- Topic: Transmission Rebuild by Kohnke Rebabbitting
- Replies: 32
- Views: 11163
Re: Transmission Rebuild by Kohnke Rebabbitting
What about starting it with the park brake on for periods of time while working on them?
- Tue Jun 08, 2021 6:45 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
Chevrolet but lots of detailed pics
- Tue Jun 08, 2021 1:11 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
Screws were drilled and countersunk?
Screw heads showing or wood plugs over?
I bought a sales catalog from eBay last week and a new metal sign.
The catalog is for Chevrolet chassis but has great pictures.
Screw heads showing or wood plugs over?
I bought a sales catalog from eBay last week and a new metal sign.
The catalog is for Chevrolet chassis but has great pictures.
- Mon Jun 07, 2021 11:53 pm
- Forum: OT - Off topic
- Topic: Took a ride today
- Replies: 17
- Views: 3508
Re: Took a ride today
Some guys remember when Model T's were $5. I had a friend back in the 70's who bought two B-25's for about $5k each. Of course he spent lots of $$ getting and keeping them flying. I have fond memories of many hours in the right seat going to airshows around the Great Lakes region with one long trip...
- Mon Jun 07, 2021 11:50 pm
- Forum: OT - Off topic
- Topic: Took a ride today
- Replies: 17
- Views: 3508
Re: Took a ride today
I got pretty misty after I was seated and they fired the engines. I told them I had some dust in my eyes.
I love this stuff.
I love this stuff.
- Mon Jun 07, 2021 12:48 pm
- Forum: Classifieds - Parts
- Topic: Round Fuel Tank
- Replies: 2
- Views: 1222
Re: Round Fuel Tank
90$ shipping??
- Mon Jun 07, 2021 11:06 am
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
Ben,
Thanks for that. It is awesome. I have to get some detailed pics of it. After a station wagon that is on my list.
Thanks for that. It is awesome. I have to get some detailed pics of it. After a station wagon that is on my list.
- Mon Jun 07, 2021 7:04 am
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
I know you told me, but I cannot find it. What year firewall/ hood former?
- Sun Jun 06, 2021 10:15 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
Good stuff guys. We can buy from Miami rubber, right up the road
- Sun Jun 06, 2021 8:26 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
Looks close to Turf Grain on the roadster tops?
- Sun Jun 06, 2021 7:18 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
What is the top covered with?
- Sun Jun 06, 2021 5:58 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
Tim
Are you talking the framework or the plywood?
I was downloading the patent pdf’s from the site and printing them off. Making a binder
Are you talking the framework or the plywood?
I was downloading the patent pdf’s from the site and printing them off. Making a binder
- Sun Jun 06, 2021 3:31 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
Will,
You will never find them until you are in the middle of a cleanup. I spend hours looking for things
You will never find them until you are in the middle of a cleanup. I spend hours looking for things
- Sun Jun 06, 2021 2:42 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
A few shots of what Dave was working on, again I don’t know what his bodies are a copy of
- Sun Jun 06, 2021 2:39 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
I built a bed from the old popular mechanics magazine article that is online.
- Sun Jun 06, 2021 2:30 pm
- Forum: General Discussion Forum
- Topic: Martin-Parry body thread
- Replies: 66
- Views: 6126
Re: Martin-Parry body thread
I am here, thanks for starting this thread Tim. I am trying to get my roadster pickup running. Then gathering parts to start on a wood body. I will try and document as much as I can. I got the bug when we drove up to Maine to pick up my Speedster body from Dave Currier last year. He impressed me wit...
- Sun Jun 06, 2021 1:06 pm
- Forum: Classifieds - Parts
- Topic: Martin-Parry wood project
- Replies: 15
- Views: 3283
Re: Martin-Parry wood project
Man, this bug is catching! I’m liking it
- Sat Jun 05, 2021 3:09 pm
- Forum: General Discussion Forum
- Topic: Personal Challenge (Contest): How cheap can I purchase/make a Model T for?
- Replies: 60
- Views: 9103
Re: Personal Challenge (Contest): How cheap can I purchase/make a Model T for?
Matt,
I will help you all out in any way I can with the wood body. I will be learning as I go also. Will probably need a new thread started in a bit on the Parry bodies.
thanks
Danny
I will help you all out in any way I can with the wood body. I will be learning as I go also. Will probably need a new thread started in a bit on the Parry bodies.
thanks
Danny
- Sat Jun 05, 2021 3:06 pm
- Forum: Classifieds - Parts
- Topic: Martin-Parry wood project
- Replies: 15
- Views: 3283
Re: Martin-Parry wood project
Guys, I will help any way I can. I will try to document the parts and make some drawings. My cad skills are basic or above, but I have a couple buddies that can take my napkin sketches and crank a drawing out in minutes. Between these parts, Dallas, and some questions of Tim, This should be a nice u...
- Sat Jun 05, 2021 1:48 pm
- Forum: OT - Off topic
- Topic: Took a ride today
- Replies: 17
- Views: 3508
Re: Took a ride today
Fast shutter on these phones
- Sat Jun 05, 2021 1:47 pm
- Forum: OT - Off topic
- Topic: Took a ride today
- Replies: 17
- Views: 3508
- Fri Jun 04, 2021 11:11 pm
- Forum: OT - Off topic
- Topic: Took a ride today
- Replies: 17
- Views: 3508
Took a ride today
3C40DC0B-F547-4991-8172-16C361B0872F.jpeg 6D80E49D-036F-4008-917A-33C8569B43C3.jpeg 44BC2941-0596-46B8-BFC2-2743DEB0FA55.jpeg Talk about history, I had a blast. Crawling through the two tunnels to get up front and back over the bomb bay was challenging. Like crawling in my roadster! You think our m...
- Fri Jun 04, 2021 9:22 am
- Forum: OT - Off topic
- Topic: High wheeler identification ?
- Replies: 6
- Views: 1891
Re: High wheeler identification ?
Looks like the person in the background is holding a pistol and wearing a COVID mask!
- Thu Jun 03, 2021 6:51 pm
- Forum: Classifieds - Parts
- Topic: Anyone have any interest in a TT frame or TT rear axle?
- Replies: 5
- Views: 1754
Re: Anyone have any interest in a TT frame or TT rear axle?
no cure yet for the disease. Keeps getting worse.
- Thu Jun 03, 2021 9:42 am
- Forum: General Discussion Forum
- Topic: Throttle and advance rods
- Replies: 21
- Views: 2983
Re: Throttle and advance rods
Mark
I am working on a Bosch front distributor timing cover. Looks like the position of the bellcrank matches a stock timer location but a repop from the vendors does not work. I have both new ones for throttle and advance for 26/27. Neither one works without modifications
I am working on a Bosch front distributor timing cover. Looks like the position of the bellcrank matches a stock timer location but a repop from the vendors does not work. I have both new ones for throttle and advance for 26/27. Neither one works without modifications
- Thu Jun 03, 2021 9:38 am
- Forum: General Discussion Forum
- Topic: Throttle and advance rods
- Replies: 21
- Views: 2983
Re: Throttle and advance rods
Speedy
Thanks for looking that up. I didn’t get past page 50 in the catalog yet.
I ordered 3 sticks
Thanks for looking that up. I didn’t get past page 50 in the catalog yet.
I ordered 3 sticks
- Wed Jun 02, 2021 8:56 pm
- Forum: General Discussion Forum
- Topic: Throttle and advance rods
- Replies: 21
- Views: 2983
Re: Throttle and advance rods
election sign wires are too small, already checked that. Good size to make a mockup template first though.
- Wed Jun 02, 2021 6:59 pm
- Forum: General Discussion Forum
- Topic: Throttle and advance rods
- Replies: 21
- Views: 2983
Re: Throttle and advance rods
measured a reproduction rod from Snyder's. That might be why.
- Wed Jun 02, 2021 6:25 pm
- Forum: General Discussion Forum
- Topic: Throttle and advance rods
- Replies: 21
- Views: 2983
Throttle and advance rods
I have a couple laying around that measure around .210 diameter. I want to buy some new rod stock to bend up some new but that’s a odd size. Any easy sources? Lowe’s, tractor supply?
- Wed Jun 02, 2021 10:34 am
- Forum: General Discussion Forum
- Topic: What have you done with your T in May
- Replies: 70
- Views: 12171
Re: What have you done with your T in May
Waiting on my bed and windshield glass. A lot of little things left to do, but it should be drivable
- Tue Jun 01, 2021 7:42 pm
- Forum: Classifieds - Parts
- Topic: Martin-Parry wood project
- Replies: 15
- Views: 3283
Re: Martin-Parry wood project
Tim, email sent
- Tue Jun 01, 2021 6:19 pm
- Forum: Classifieds - Parts
- Topic: 1926-7 hood, excellent survivor
- Replies: 4
- Views: 1085
Re: 1926-7 hood, excellent survivor
It will not get painted
- Tue Jun 01, 2021 1:02 pm
- Forum: Classifieds - Parts
- Topic: 1926-7 hood, excellent survivor
- Replies: 4
- Views: 1085
Re: 1926-7 hood, excellent survivor
Tim
I will take the hood
Cannot email you till later
I will take the hood
Cannot email you till later
- Mon May 31, 2021 8:30 pm
- Forum: General Discussion Forum
- Topic: I was warned about powder coating hubs and now...
- Replies: 19
- Views: 4099
Re: I was warned about powder coating hubs and now...
Tim
What was the powder coat color that looks like zinc plating? You have sparked my interest
What was the powder coat color that looks like zinc plating? You have sparked my interest
- Mon May 31, 2021 8:25 pm
- Forum: General Discussion Forum
- Topic: Gypsy Curtain Patterns for a 26-27 Roadster
- Replies: 10
- Views: 2355
Re: Gypsy Curtain Patterns for a 26-27 Roadster
I will measure the angles as non are right angles to start with
- Mon May 31, 2021 3:34 pm
- Forum: General Discussion Forum
- Topic: Gypsy Curtain Patterns for a 26-27 Roadster
- Replies: 10
- Views: 2355
Re: Gypsy Curtain Patterns for a 26-27 Roadster
Make a template from cardboard first.
- Sun May 30, 2021 7:12 pm
- Forum: Classifieds - Parts
- Topic: SUNDAY SWAP MEET
- Replies: 10
- Views: 2216
Re: SUNDAY SWAP MEET
I will take 4 and 5 please
- Sun May 30, 2021 6:56 pm
- Forum: General Discussion Forum
- Topic: Transmission Rebuild by Kohnke Rebabbitting
- Replies: 32
- Views: 11163
Re: Transmission Rebuild by Kohnke Rebabbitting
Good information
Thanks guys!
Thanks guys!
- Sun May 30, 2021 9:21 am
- Forum: General Discussion Forum
- Topic: Transmission Rebuild by Kohnke Rebabbitting
- Replies: 32
- Views: 11163
Re: Transmission Rebuild by Kohnke Rebabbitting
So how do you drive these right to save these, and what do you wrong to trash them?
- Sun May 30, 2021 9:18 am
- Forum: Classifieds - Parts
- Topic: E-Timer Alert
- Replies: 14
- Views: 3420
Re: E-Timer Alert
emailed him and got a good answer, thanks guys
- Sat May 29, 2021 6:18 pm
- Forum: General Discussion Forum
- Topic: Thanks!
- Replies: 9
- Views: 1971
Re: Thanks!
Thank you veterans, I think about them all the time. I served in the army, not during a conflict. Love all my brothers
- Sat May 29, 2021 10:52 am
- Forum: General Discussion Forum
- Topic: Timing advance and retard
- Replies: 13
- Views: 2730
Timing advance and retard
Been trying to read and learn all I can on this subject. What is the total amount of mechanical advance with a timer? Range? Is this the same with a replacement distributor? I am talking strictly mechanical.
Thanks
Thanks
- Sat May 29, 2021 10:47 am
- Forum: General Discussion Forum
- Topic: Transmission Rebuild by Kohnke Rebabbitting
- Replies: 32
- Views: 11163
Re: Transmission Rebuild by Kohnke Rebabbitting
It is a given that any material softer than steel will wear quicker. How long have the modern discs lasted in some of your builds?
- Sat May 29, 2021 10:42 am
- Forum: Classifieds - Parts
- Topic: E-Timer Alert
- Replies: 14
- Views: 3420
Re: E-Timer Alert
I guess I sat on the fence one day too long
- Fri May 28, 2021 10:23 pm
- Forum: Classifieds - Parts
- Topic: E-Timer Alert
- Replies: 14
- Views: 3420
Re: E-Timer Alert
So you are out of stock now
No more to be made?
No more to be made?
- Fri May 28, 2021 1:49 pm
- Forum: Classifieds - Parts
- Topic: ATTN: TIM MORSHER
- Replies: 31
- Views: 5082
Re: ATTN: TIM MORSHER
I lost 2 shipments from Snyder's FedEx last week. I have ordered from them to many times to count, and always pick FedEx. Always 1 day delivery from the other corner of OH. Tracking says they left on the front porch. Nota, nothing. They say its a staffing issue now.
- Fri May 28, 2021 11:38 am
- Forum: Classifieds - Parts
- Topic: ATTN: TIM MORSHER
- Replies: 31
- Views: 5082
Re: ATTN: TIM MORSHER
It’s raining here
- Fri May 28, 2021 9:21 am
- Forum: Classifieds - Parts
- Topic: E-Timer Alert
- Replies: 14
- Views: 3420
Re: E-Timer Alert
Is the ATA mode software adjustable, or fixed?
Thanks
Thanks
- Fri May 28, 2021 8:20 am
- Forum: Classifieds - Parts
- Topic: ATTN: TIM MORSHER
- Replies: 31
- Views: 5082
Re: ATTN: TIM MORSHER
No it doesn’t stop here. I didn’t get to put my 2 cents in. I am mad at Tim myself. He takes all my extra money and keeps coming up with this neat stuff you cannot live without. He knows what I’m talking about! Good on the OP for setting things right. And Tim deserves a good flogging. 😁😁😁😁 As the ol...
- Fri May 28, 2021 8:09 am
- Forum: General Discussion Forum
- Topic: VEHICLES FOR SALE BY THE MTFCA!
- Replies: 59
- Views: 11868
Re: VEHICLES FOR SALE BY THE MTFCA!
I don’t think any museum would take my junk. Relax and enjoy your cars and life while u have it! no fossil fuel cars allowed on the road in a few years anyway. Drive um like you stole um.
- Wed May 26, 2021 8:48 am
- Forum: General Discussion Forum
- Topic: Hemmings
- Replies: 6
- Views: 1844
Hemmings
Hemmings side magazine “classic cars” has a 2 part article starting this month on rebuilding the model T rear axle. I didn’t read it yet but lots of nice color pics.
- Tue May 25, 2021 7:21 pm
- Forum: Classifieds - Parts
- Topic: Combination Coil Bulb Tester
- Replies: 4
- Views: 1276
Re: Combination Coil Bulb Tester
Pm sent
I will take it
I will take it