Search found 729 matches

by dmdeaton
Mon Jul 25, 2022 2:04 pm
Forum: General Discussion Forum
Topic: Possible run of spare tire carriers.
Replies: 9
Views: 2352

Re: Possible run of spare tire carriers.

I would take a set
by dmdeaton
Sat Sep 04, 2021 12:02 pm
Forum: General Discussion Forum
Topic: World War 1 Model Ts
Replies: 57
Views: 8201

Re: World War 1 Model Ts

Now that’s a first. Is that one Carburator shared between the 2 engines?
by dmdeaton
Fri Sep 03, 2021 12:31 am
Forum: General Discussion Forum
Topic: 12 Volt Geared Starter
Replies: 28
Views: 5964

Re: 12 Volt Geared Starter

I have spread my nickels around all the vendors and then some. Some specialty items are better sourced from the manufacturer than the vendors. Tech support comes to mind, which is far better from the source. I’m not a cheap a## by no means but when you are sourcing parts and pieces it is far better ...
by dmdeaton
Thu Sep 02, 2021 8:38 pm
Forum: General Discussion Forum
Topic: 12 Volt Geared Starter
Replies: 28
Views: 5964

Re: 12 Volt Geared Starter

I am running 4 of these British starters
2 on t’s and 2 on a’s
This starter coupled with a good battery and you are good to go for a while. Bicker all you want, I like drivability.
by dmdeaton
Tue Aug 31, 2021 7:35 pm
Forum: General Discussion Forum
Topic: World War 1 Model Ts
Replies: 57
Views: 8201

Re: World War 1 Model Ts

20160920_214015.jpg Had one it's made in america my great uncle was a supply Sgt in ww1 he had two bodies he bought army surplus tucked under his front porch my dad got them and put one together here are pictures Allen, that is supposed to be a M&P body. The 2nd one is in the Marine Corp museum in ...
by dmdeaton
Mon Aug 30, 2021 9:49 pm
Forum: General Discussion Forum
Topic: Tony Wiltshire - RIP
Replies: 27
Views: 5746

Re: Tony Wiltshire - RIP

I just met him at the homecoming when they rode out to the Salty Dog museum in Shandon, OH. It was pouring down rain when everyone pulled in. I couldnt get over all the details on his speedster. From a distance it looked like a plain jane speedster, but a closer look showed lots of nice details. I a...
by dmdeaton
Mon Aug 09, 2021 10:35 am
Forum: General Discussion Forum
Topic: Rear end
Replies: 17
Views: 2497

Re: Rear end

The axle broke on the differential side of the Hyatt bearing? Is this common? The stress is on the wheel side of the Hyatt.
by dmdeaton
Fri Aug 06, 2021 12:03 pm
Forum: Classifieds - Parts
Topic: Wanted
Replies: 3
Views: 1358

Re: Wanted

yea, but this only means he will be offering more styles later on. So hang on!!
by dmdeaton
Tue Aug 03, 2021 7:25 pm
Forum: General Discussion Forum
Topic: Rear End Oil
Replies: 27
Views: 4370

Re: Rear End Oil

I pack my wheel bearings with 600 weight 😁
by dmdeaton
Tue Aug 03, 2021 7:23 pm
Forum: General Discussion Forum
Topic: Scat Crankshafts
Replies: 9
Views: 2185

Re: Scat Crankshafts

Like all hobbies, need to think in advance and get when available. Anything in this hobby and others. I have a scat on order from the next batch just to stash back for my next build
by dmdeaton
Tue Aug 03, 2021 7:16 pm
Forum: General Discussion Forum
Topic: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?
Replies: 50
Views: 6991

Re: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?

Hard drive space is cheap and easy. Don’t need a commercial server or rented cloud space to store all the files. I stated previously I would have the papers scanned and even return them to the owner to get this going. I do not want profit for this, as I have a full time business and this is just a h...
by dmdeaton
Tue Aug 03, 2021 7:10 pm
Forum: General Discussion Forum
Topic: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?
Replies: 50
Views: 6991

Re: Update 6/2/21 What full set of Mr & Mrs Leon Parker plans do you have?

All you need to do is take them and have them scanned high resolution and put the files on a memory stick. The files can be zipped up and emailed to anyone who wants a copy. It is that easy. If files turn out too large to email pay 20$ for a memory stick and charge for this plus ship. Still cheap an...
by dmdeaton
Mon Aug 02, 2021 8:31 am
Forum: General Discussion Forum
Topic: Rear End Oil
Replies: 27
Views: 4370

Re: Rear End Oil

I would also like to hear some reasons why to not use a more modern viscosity gear lube. Seal leakage? I don’t want to hear because Henry did it that way, oils have come a long way since then. I run 90 synthetic in my model A housing without problems at all.
Thanks
by dmdeaton
Thu Jul 29, 2021 6:27 pm
Forum: Classifieds - Parts
Topic: Stromberg carb kit fs
Replies: 4
Views: 1291

Re: Stromberg carb kit fs

That pink piece is the accelerator pump
by dmdeaton
Tue Jul 27, 2021 9:25 am
Forum: Classifieds - Parts
Topic: Help needed finding a ignition switch
Replies: 8
Views: 2015

Re: Help needed finding a ignition switch

Ben will want a core to rebuild
Anything will do, but he wants a good pot metal center that is not broken
👍👍
by dmdeaton
Fri Jul 23, 2021 3:02 pm
Forum: General Discussion Forum
Topic: "Gypsy" side curtains, awesome.
Replies: 11
Views: 2135

Re: "Gypsy" side curtains, awesome.

John,
can you post a pic of the inside of the gypsy curtains, how they attach to the door?
thanks
by dmdeaton
Thu Jul 22, 2021 8:01 am
Forum: General Discussion Forum
Topic: New to Hershey
Replies: 18
Views: 2905

Re: New to Hershey

I know the crab cake vendor well!!😁
by dmdeaton
Tue Jul 20, 2021 3:37 pm
Forum: General Discussion Forum
Topic: Coil Test Tube Ball Bearing Thingy
Replies: 11
Views: 2036

Re: Coil Test Tube Ball Bearing Thingy

Got some things to look for at Hershey. :D
by dmdeaton
Mon Jul 19, 2021 8:06 pm
Forum: General Discussion Forum
Topic: Coil Test Tube Ball Bearing Thingy
Replies: 11
Views: 2036

Coil Test Tube Ball Bearing Thingy

Somewhere I read the article on how to build this and cannot find it now. I saw one in action at the homecoming and didnt take time to ask about it. For some reason I want to make or purchase one. Anyone have any leads? I dont know the correct name of the thing to do a search. Thanks in advance. PS,...
by dmdeaton
Sat Jul 17, 2021 10:44 am
Forum: General Discussion Forum
Topic: Installing Rajo oil level indicator
Replies: 12
Views: 2363

Re: Installing Rajo oil level indicator

Is the float in a bind? May need tweaking
by dmdeaton
Sat Jul 17, 2021 10:42 am
Forum: General Discussion Forum
Topic: Presto-Magico...ugly duckling to a beautiful swan
Replies: 2
Views: 1387

Re: Presto-Magico...ugly duckling to a beautiful swan

Scott
How is the shaft attached to the head? Press fit?
by dmdeaton
Wed Jul 14, 2021 12:31 pm
Forum: General Discussion Forum
Topic: Radiator cap spinning while driving.
Replies: 25
Views: 3532

Re: Radiator cap spinning while driving.

John Codman wrote:
Wed Jul 14, 2021 9:48 am
You could move South of the equator; the Coriolis effect would then cause the cap to tighten.
:lol: sorry, but that is funny
by dmdeaton
Sat Jul 10, 2021 5:42 pm
Forum: General Discussion Forum
Topic: Photo of the day
Replies: 5
Views: 1583

Re: Photo of the day

Cleaning the container out behind the machine shop. All have major issues and going to scrap. Major issues
by dmdeaton
Sat Jul 10, 2021 3:23 pm
Forum: General Discussion Forum
Topic: Photo of the day
Replies: 5
Views: 1583

Photo of the day

9061B36C-20AB-4493-9A60-CDFC920BFF8B.jpeg
by dmdeaton
Thu Jul 08, 2021 2:32 pm
Forum: Classifieds - Parts
Topic: WTB 23-27 Windshield frame cones
Replies: 0
Views: 636

WTB 23-27 Windshield frame cones

I need a set of 4 originals with some patina if anyone has any
thanks
by dmdeaton
Thu Jul 08, 2021 2:23 pm
Forum: Classifieds - Parts
Topic: Hayes Chevy 490 rim / superior K wheel rim
Replies: 11
Views: 1934

Re: Hayes Chevy 490 rim / superior K wheel rim

So this can be modified to use as a 21" T rim?
sent you a email Brian
by dmdeaton
Wed Jun 30, 2021 7:57 am
Forum: General Discussion Forum
Topic: Canning Model T parts
Replies: 10
Views: 2458

Re: Canning Model T parts

Someone’s time capsule
And those lug nuts have great patina
by dmdeaton
Tue Jun 29, 2021 1:48 pm
Forum: General Discussion Forum
Topic: First Stromberg OF needle fresh off of assembly jig - New Pix, New Needle
Replies: 23
Views: 3312

Re: First Stromberg OF needle fresh off of assembly jig

Are the outer rings coming next?😁
Put me in for a couple sets when you get them finished, the needles I mean
by dmdeaton
Tue Jun 29, 2021 12:03 pm
Forum: General Discussion Forum
Topic: First Stromberg OF needle fresh off of assembly jig - New Pix, New Needle
Replies: 23
Views: 3312

Re: First Stromberg OF needle fresh off of assembly jig

And the longer needle shouldn’t be a problem?
by dmdeaton
Tue Jun 29, 2021 7:59 am
Forum: General Discussion Forum
Topic: This weekends project (touring to pick up)
Replies: 58
Views: 6307

Re: This weekends project

I like it. Are you going to paint or varnish?
by dmdeaton
Tue Jun 22, 2021 4:40 pm
Forum: General Discussion Forum
Topic: Metal Polish
Replies: 16
Views: 2993

Re: Metal Polish

https://www.amazon.com/Quick-Glo-Chrome-Cleaner-ouces/dp/B008ZRHAEE/ref=asc_df_B008ZRHAEE/?tag=hyprod-20&linkCode=df0&hvadid=167151917164&hvpos=&hvnetw=g&hvrand=2781206234261660171&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1023972&hvtargid=pla-308959450725&psc=1 Jay Leno approved S...
by dmdeaton
Fri Jun 18, 2021 7:07 am
Forum: General Discussion Forum
Topic: Shout out for Dan McEachern
Replies: 4
Views: 1548

Re: Shout out for Dan McEachern

All I know is Dan makes some nice parts. 😁👍
by dmdeaton
Thu Jun 17, 2021 8:55 pm
Forum: General Discussion Forum
Topic: I Really Like These Bohlen “Solid” Brass Aftermarket Side View Mirrors
Replies: 14
Views: 3131

Re: I Really Like These “Solid” Brass Aftermarket Side View Mirrors

I have one of his black mirrors and haven’t mounted it yet. It looks sturdy
by dmdeaton
Wed Jun 16, 2021 10:53 pm
Forum: OT - Off topic
Topic: Took a ride today
Replies: 17
Views: 3501

Re: Took a ride today

I want that lamp and all I was allowed to get was the Christmas ornament. 😁
by dmdeaton
Wed Jun 16, 2021 8:49 am
Forum: General Discussion Forum
Topic: Miller head update
Replies: 54
Views: 8578

Re: Miller head update

Tom
How soon till finished product?
by dmdeaton
Wed Jun 16, 2021 6:06 am
Forum: OT - Off topic
Topic: Took a ride today
Replies: 17
Views: 3501

Re: Took a ride today

John
I love trench art. I have a few pieces I picked up over the years. It’s nice you have a piece from a family member. My wife draws the line with lamps though! 😁
by dmdeaton
Tue Jun 15, 2021 5:05 pm
Forum: General Discussion Forum
Topic: Homecoming
Replies: 32
Views: 6519

Re: Homecoming

I will be at Ron’s machine shop/ salty dog museum Friday helping out when the tour stops by.
by dmdeaton
Mon Jun 14, 2021 8:57 pm
Forum: General Discussion Forum
Topic: Pickup bed wood floor question
Replies: 9
Views: 2261

Re: Pickup bed wood floor question

Your car doesn't need oak. Ford used Southern Yellow Pine, and it is painted black to be correct. Larry, I like the yellow pine idea better for none other than it is half the weight of oak. This metal bed is heavy with the oak boards. Making the floorboards is not an issue as we have a sawmill and ...
by dmdeaton
Sun Jun 13, 2021 1:21 pm
Forum: General Discussion Forum
Topic: Pickup bed wood floor question
Replies: 9
Views: 2261

Re: Pickup bed wood floor question

Larry
I don’t know that answer myself and I am using the oak kit from the vendors. I didn’t measure the thickness of what I have. I was going to mill my planks but the kit was thrown in the deal on the metal parts

Hank
I never get the chance with your wife cooking all the time. 😁😁
by dmdeaton
Sun Jun 13, 2021 8:52 am
Forum: General Discussion Forum
Topic: Pickup bed wood floor question
Replies: 9
Views: 2261

Re: Pickup bed wood floor question

Dan
You are a lifesaver!
Thanks a bunch, that is perfect. I owe you lunch sometime if we meet
by dmdeaton
Sat Jun 12, 2021 9:57 pm
Forum: General Discussion Forum
Topic: Pickup bed wood floor question
Replies: 9
Views: 2261

Pickup bed wood floor question

714837E6-3605-4082-873E-FF9902F4C356.jpeg D37C4106-394C-42C6-B887-DDA871BEDAF8.jpeg Trying to find a layout of how the wood bed floor is assembled and bolted in. I assume it will be easier while the bed is on saw horses. The wood kit is cut for the battery hatch so what supports the planks that are...
by dmdeaton
Fri Jun 11, 2021 9:30 pm
Forum: General Discussion Forum
Topic: Homecoming
Replies: 32
Views: 6519

Re: Homecoming

No one on the forum is going?
by dmdeaton
Fri Jun 11, 2021 3:26 pm
Forum: General Discussion Forum
Topic: Homecoming
Replies: 32
Views: 6519

Homecoming

Who is going to the homecoming next weekend?
by dmdeaton
Fri Jun 11, 2021 3:06 pm
Forum: General Discussion Forum
Topic: Just starting
Replies: 11
Views: 2543

Re: Just starting

Pictures please 😁😁
by dmdeaton
Thu Jun 10, 2021 3:25 pm
Forum: General Discussion Forum
Topic: Transmission Rebuild by Kohnke Rebabbitting
Replies: 32
Views: 11159

Re: Transmission Rebuild by Kohnke Rebabbitting

Reason for question is running while performing tasks such as tuning on carb, timing, and such.
by dmdeaton
Thu Jun 10, 2021 10:27 am
Forum: General Discussion Forum
Topic: Transmission Rebuild by Kohnke Rebabbitting
Replies: 32
Views: 11159

Re: Transmission Rebuild by Kohnke Rebabbitting

What about starting it with the park brake on for periods of time while working on them?
by dmdeaton
Tue Jun 08, 2021 6:45 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

31D22BCA-871D-41D8-AEEC-1CC3A2A87EB1.jpeg
49AB9B3B-6F8F-4703-9E9A-03E8207F3C4B.jpeg
Sales catalog I snagged from eBay
Chevrolet but lots of detailed pics
by dmdeaton
Tue Jun 08, 2021 1:11 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

Screws were drilled and countersunk?
Screw heads showing or wood plugs over?

I bought a sales catalog from eBay last week and a new metal sign.
The catalog is for Chevrolet chassis but has great pictures.
by dmdeaton
Mon Jun 07, 2021 11:53 pm
Forum: OT - Off topic
Topic: Took a ride today
Replies: 17
Views: 3501

Re: Took a ride today

Some guys remember when Model T's were $5. I had a friend back in the 70's who bought two B-25's for about $5k each. Of course he spent lots of $$ getting and keeping them flying. I have fond memories of many hours in the right seat going to airshows around the Great Lakes region with one long trip...
by dmdeaton
Mon Jun 07, 2021 11:50 pm
Forum: OT - Off topic
Topic: Took a ride today
Replies: 17
Views: 3501

Re: Took a ride today

I got pretty misty after I was seated and they fired the engines. I told them I had some dust in my eyes.😥
I love this stuff.
by dmdeaton
Mon Jun 07, 2021 12:48 pm
Forum: Classifieds - Parts
Topic: Round Fuel Tank
Replies: 2
Views: 1222

Re: Round Fuel Tank

90$ shipping?? 😳
by dmdeaton
Mon Jun 07, 2021 11:06 am
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

Ben,
Thanks for that. It is awesome. I have to get some detailed pics of it. After a station wagon that is on my list.
by dmdeaton
Mon Jun 07, 2021 7:04 am
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

I know you told me, but I cannot find it. What year firewall/ hood former?
by dmdeaton
Sun Jun 06, 2021 10:15 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

Good stuff guys. We can buy from Miami rubber, right up the road
by dmdeaton
Sun Jun 06, 2021 8:26 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

Looks close to Turf Grain on the roadster tops?
by dmdeaton
Sun Jun 06, 2021 7:18 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

What is the top covered with?
by dmdeaton
Sun Jun 06, 2021 5:58 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

Tim
Are you talking the framework or the plywood?
I was downloading the patent pdf’s from the site and printing them off. Making a binder
by dmdeaton
Sun Jun 06, 2021 3:31 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

Will,
You will never find them until you are in the middle of a cleanup. I spend hours looking for things
by dmdeaton
Sun Jun 06, 2021 2:42 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

E9E0CEAE-BCD3-4339-B3A9-C5FF8C61E79D.jpeg
DDC58653-A8DC-46D1-B605-0F0F8BABFF63.jpeg
D036F0BA-58B7-45C2-858B-03D667C92F36.jpeg
01576D7C-C719-4FF4-9916-57BEAC11F34B.jpeg
A few shots of what Dave was working on, again I don’t know what his bodies are a copy of
by dmdeaton
Sun Jun 06, 2021 2:39 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

FD644E6D-5791-45D2-BB6F-339A40A73832.jpeg
FD5FE418-856B-4D43-AD27-2070468753DA.jpeg
I built a bed from the old popular mechanics magazine article that is online.
by dmdeaton
Sun Jun 06, 2021 2:30 pm
Forum: General Discussion Forum
Topic: Martin-Parry body thread
Replies: 66
Views: 6123

Re: Martin-Parry body thread

I am here, thanks for starting this thread Tim. I am trying to get my roadster pickup running. Then gathering parts to start on a wood body. I will try and document as much as I can. I got the bug when we drove up to Maine to pick up my Speedster body from Dave Currier last year. He impressed me wit...
by dmdeaton
Sun Jun 06, 2021 1:06 pm
Forum: Classifieds - Parts
Topic: Martin-Parry wood project
Replies: 15
Views: 3283

Re: Martin-Parry wood project

Man, this bug is catching! I’m liking it 😁
by dmdeaton
Sat Jun 05, 2021 3:09 pm
Forum: General Discussion Forum
Topic: Personal Challenge (Contest): How cheap can I purchase/make a Model T for?
Replies: 60
Views: 9099

Re: Personal Challenge (Contest): How cheap can I purchase/make a Model T for?

Matt,
I will help you all out in any way I can with the wood body. I will be learning as I go also. Will probably need a new thread started in a bit on the Parry bodies.
thanks
Danny
by dmdeaton
Sat Jun 05, 2021 3:06 pm
Forum: Classifieds - Parts
Topic: Martin-Parry wood project
Replies: 15
Views: 3283

Re: Martin-Parry wood project

Guys, I will help any way I can. I will try to document the parts and make some drawings. My cad skills are basic or above, but I have a couple buddies that can take my napkin sketches and crank a drawing out in minutes. Between these parts, Dallas, and some questions of Tim, This should be a nice u...
by dmdeaton
Sat Jun 05, 2021 1:48 pm
Forum: OT - Off topic
Topic: Took a ride today
Replies: 17
Views: 3501

Re: Took a ride today

Fast shutter on these phones 😁
by dmdeaton
Sat Jun 05, 2021 1:47 pm
Forum: OT - Off topic
Topic: Took a ride today
Replies: 17
Views: 3501

Re: Took a ride today

47CC6F03-C693-40A6-9FF1-B4E4070B1FA6.jpeg
by dmdeaton
Fri Jun 04, 2021 11:11 pm
Forum: OT - Off topic
Topic: Took a ride today
Replies: 17
Views: 3501

Took a ride today

3C40DC0B-F547-4991-8172-16C361B0872F.jpeg 6D80E49D-036F-4008-917A-33C8569B43C3.jpeg 44BC2941-0596-46B8-BFC2-2743DEB0FA55.jpeg Talk about history, I had a blast. Crawling through the two tunnels to get up front and back over the bomb bay was challenging. Like crawling in my roadster! You think our m...
by dmdeaton
Fri Jun 04, 2021 9:22 am
Forum: OT - Off topic
Topic: High wheeler identification ?
Replies: 6
Views: 1890

Re: High wheeler identification ?

Looks like the person in the background is holding a pistol and wearing a COVID mask! 😁
by dmdeaton
Thu Jun 03, 2021 6:51 pm
Forum: Classifieds - Parts
Topic: Anyone have any interest in a TT frame or TT rear axle?
Replies: 5
Views: 1754

Re: Anyone have any interest in a TT frame or TT rear axle?

no cure yet for the disease. Keeps getting worse.
by dmdeaton
Thu Jun 03, 2021 9:42 am
Forum: General Discussion Forum
Topic: Throttle and advance rods
Replies: 21
Views: 2981

Re: Throttle and advance rods

Mark
I am working on a Bosch front distributor timing cover. Looks like the position of the bellcrank matches a stock timer location but a repop from the vendors does not work. I have both new ones for throttle and advance for 26/27. Neither one works without modifications
by dmdeaton
Thu Jun 03, 2021 9:38 am
Forum: General Discussion Forum
Topic: Throttle and advance rods
Replies: 21
Views: 2981

Re: Throttle and advance rods

Speedy
Thanks for looking that up. I didn’t get past page 50 in the catalog yet. 😁

I ordered 3 sticks
by dmdeaton
Wed Jun 02, 2021 8:56 pm
Forum: General Discussion Forum
Topic: Throttle and advance rods
Replies: 21
Views: 2981

Re: Throttle and advance rods

election sign wires are too small, already checked that. Good size to make a mockup template first though.
by dmdeaton
Wed Jun 02, 2021 6:59 pm
Forum: General Discussion Forum
Topic: Throttle and advance rods
Replies: 21
Views: 2981

Re: Throttle and advance rods

measured a reproduction rod from Snyder's. That might be why.
by dmdeaton
Wed Jun 02, 2021 6:25 pm
Forum: General Discussion Forum
Topic: Throttle and advance rods
Replies: 21
Views: 2981

Throttle and advance rods

I have a couple laying around that measure around .210 diameter. I want to buy some new rod stock to bend up some new but that’s a odd size. Any easy sources? Lowe’s, tractor supply?
by dmdeaton
Wed Jun 02, 2021 10:34 am
Forum: General Discussion Forum
Topic: What have you done with your T in May
Replies: 70
Views: 12164

Re: What have you done with your T in May

334351BA-4A45-497A-8A68-26214E96BE90.jpeg
Waiting on my bed and windshield glass. A lot of little things left to do, but it should be drivable
by dmdeaton
Tue Jun 01, 2021 7:42 pm
Forum: Classifieds - Parts
Topic: Martin-Parry wood project
Replies: 15
Views: 3283

Re: Martin-Parry wood project

Tim, email sent
by dmdeaton
Tue Jun 01, 2021 6:19 pm
Forum: Classifieds - Parts
Topic: 1926-7 hood, excellent survivor
Replies: 4
Views: 1085

Re: 1926-7 hood, excellent survivor

It will not get painted 😁
by dmdeaton
Tue Jun 01, 2021 1:02 pm
Forum: Classifieds - Parts
Topic: 1926-7 hood, excellent survivor
Replies: 4
Views: 1085

Re: 1926-7 hood, excellent survivor

Tim
I will take the hood
Cannot email you till later
by dmdeaton
Mon May 31, 2021 8:30 pm
Forum: General Discussion Forum
Topic: I was warned about powder coating hubs and now...
Replies: 19
Views: 4098

Re: I was warned about powder coating hubs and now...

Tim
What was the powder coat color that looks like zinc plating? You have sparked my interest 😁
by dmdeaton
Mon May 31, 2021 8:25 pm
Forum: General Discussion Forum
Topic: Gypsy Curtain Patterns for a 26-27 Roadster
Replies: 10
Views: 2353

Re: Gypsy Curtain Patterns for a 26-27 Roadster

I will measure the angles as non are right angles to start with
by dmdeaton
Mon May 31, 2021 3:34 pm
Forum: General Discussion Forum
Topic: Gypsy Curtain Patterns for a 26-27 Roadster
Replies: 10
Views: 2353

Re: Gypsy Curtain Patterns for a 26-27 Roadster

Make a template from cardboard first.
by dmdeaton
Sun May 30, 2021 7:12 pm
Forum: Classifieds - Parts
Topic: SUNDAY SWAP MEET
Replies: 10
Views: 2216

Re: SUNDAY SWAP MEET

I will take 4 and 5 please
by dmdeaton
Sun May 30, 2021 6:56 pm
Forum: General Discussion Forum
Topic: Transmission Rebuild by Kohnke Rebabbitting
Replies: 32
Views: 11159

Re: Transmission Rebuild by Kohnke Rebabbitting

Good information
Thanks guys!
by dmdeaton
Sun May 30, 2021 9:21 am
Forum: General Discussion Forum
Topic: Transmission Rebuild by Kohnke Rebabbitting
Replies: 32
Views: 11159

Re: Transmission Rebuild by Kohnke Rebabbitting

So how do you drive these right to save these, and what do you wrong to trash them?
by dmdeaton
Sun May 30, 2021 9:18 am
Forum: Classifieds - Parts
Topic: E-Timer Alert
Replies: 14
Views: 3419

Re: E-Timer Alert

emailed him and got a good answer, thanks guys
by dmdeaton
Sat May 29, 2021 6:18 pm
Forum: General Discussion Forum
Topic: Thanks!
Replies: 9
Views: 1971

Re: Thanks!

Thank you veterans, I think about them all the time. I served in the army, not during a conflict. Love all my brothers
by dmdeaton
Sat May 29, 2021 10:52 am
Forum: General Discussion Forum
Topic: Timing advance and retard
Replies: 13
Views: 2727

Timing advance and retard

Been trying to read and learn all I can on this subject. What is the total amount of mechanical advance with a timer? Range? Is this the same with a replacement distributor? I am talking strictly mechanical.

Thanks
by dmdeaton
Sat May 29, 2021 10:47 am
Forum: General Discussion Forum
Topic: Transmission Rebuild by Kohnke Rebabbitting
Replies: 32
Views: 11159

Re: Transmission Rebuild by Kohnke Rebabbitting

It is a given that any material softer than steel will wear quicker. How long have the modern discs lasted in some of your builds?
by dmdeaton
Sat May 29, 2021 10:42 am
Forum: Classifieds - Parts
Topic: E-Timer Alert
Replies: 14
Views: 3419

Re: E-Timer Alert

I guess I sat on the fence one day too long 😥
by dmdeaton
Fri May 28, 2021 10:23 pm
Forum: Classifieds - Parts
Topic: E-Timer Alert
Replies: 14
Views: 3419

Re: E-Timer Alert

So you are out of stock now
No more to be made?
by dmdeaton
Fri May 28, 2021 1:49 pm
Forum: Classifieds - Parts
Topic: ATTN: TIM MORSHER
Replies: 31
Views: 5081

Re: ATTN: TIM MORSHER

I lost 2 shipments from Snyder's FedEx last week. I have ordered from them to many times to count, and always pick FedEx. Always 1 day delivery from the other corner of OH. Tracking says they left on the front porch. Nota, nothing. They say its a staffing issue now.
by dmdeaton
Fri May 28, 2021 11:38 am
Forum: Classifieds - Parts
Topic: ATTN: TIM MORSHER
Replies: 31
Views: 5081

Re: ATTN: TIM MORSHER

It’s raining here 😥
by dmdeaton
Fri May 28, 2021 9:21 am
Forum: Classifieds - Parts
Topic: E-Timer Alert
Replies: 14
Views: 3419

Re: E-Timer Alert

Is the ATA mode software adjustable, or fixed?
Thanks
by dmdeaton
Fri May 28, 2021 8:20 am
Forum: Classifieds - Parts
Topic: ATTN: TIM MORSHER
Replies: 31
Views: 5081

Re: ATTN: TIM MORSHER

No it doesn’t stop here. I didn’t get to put my 2 cents in. I am mad at Tim myself. He takes all my extra money and keeps coming up with this neat stuff you cannot live without. He knows what I’m talking about! Good on the OP for setting things right. And Tim deserves a good flogging. 😁😁😁😁 As the ol...
by dmdeaton
Fri May 28, 2021 8:09 am
Forum: General Discussion Forum
Topic: VEHICLES FOR SALE BY THE MTFCA!
Replies: 59
Views: 11867

Re: VEHICLES FOR SALE BY THE MTFCA!

I don’t think any museum would take my junk. Relax and enjoy your cars and life while u have it! 😁 no fossil fuel cars allowed on the road in a few years anyway. Drive um like you stole um.
by dmdeaton
Wed May 26, 2021 8:48 am
Forum: General Discussion Forum
Topic: Hemmings
Replies: 6
Views: 1844

Hemmings

Hemmings side magazine “classic cars” has a 2 part article starting this month on rebuilding the model T rear axle. I didn’t read it yet but lots of nice color pics.
by dmdeaton
Tue May 25, 2021 7:21 pm
Forum: Classifieds - Parts
Topic: Combination Coil Bulb Tester
Replies: 4
Views: 1276

Re: Combination Coil Bulb Tester

Pm sent
I will take it