Search found 36 matches
- Fri Feb 25, 2022 9:23 am
- Forum: General Discussion Forum
- Topic: One coil buzzes constantly
- Replies: 11
- Views: 1798
Re: One coil buzzes constantly
I had this happen on my 1911 once and i can say from experience that you should never ever attempt to crank an engine by hand with a coil that is always buzzing. It will fire early and mule kick you every single time. Dangerous stuff. In my case the clearance for the timer rod is very close on an ea...
- Fri Feb 25, 2022 9:11 am
- Forum: General Discussion Forum
- Topic: Adjusting spark coils by sound
- Replies: 23
- Views: 2485
Re: Adjusting spark coils by sound
It was always my understanding that this was how the phrase “tune up” came into the popular lexicon of automotive language. Since the coils produce a pronounced pitch the thought was that making them all produce the same pitch produced a better running engine. This was especially true of the heinze ...
- Fri Feb 04, 2022 10:07 pm
- Forum: General Discussion Forum
- Topic: who solders brass for repairs?
- Replies: 10
- Views: 2204
Re: who solders brass for repairs?
These reproduction brackets fail frequently due to the poor joining to the base plate and because the post section is much taller than on the original part and thus is easy to put under bending stress when bumped into. I suggest you shorten the post by half before you silver solder it back to the ba...
- Thu Feb 03, 2022 9:53 am
- Forum: General Discussion Forum
- Topic: What have you done on your T in February
- Replies: 45
- Views: 6658
Re: What have you done on your T in February
Steve, we had a guy in our club that straightened tons of manifolds. He put them in a bucket of sand before they cooled and this kept them from cracking. Worked every time.
- Sun Jan 30, 2022 6:11 am
- Forum: General Discussion Forum
- Topic: Heinze Coils - An Inferior Design; OR Did History Get it Wrong!
- Replies: 15
- Views: 3139
Re: Heinze Coils - An Inferior Design; OR Did History Get it Wrong!
My experience running heinze coils has been very good. I ran them for years in my 1911 torpedo and never opened the box. They simply ran well, started great and never needed attention. Perhaps the reputation largely stems from owners constant fiddling with coils during the active life of these cars....
- Mon Jan 17, 2022 10:33 pm
- Forum: General Discussion Forum
- Topic: 1915: What's correct here?
- Replies: 12
- Views: 2170
Re: 1915: What's correct here?
All 1915 cars have that hole. All cars had a round head slotted bolt with a nut on the back side.
- Mon Jan 17, 2022 10:28 pm
- Forum: General Discussion Forum
- Topic: Randall Anderson
- Replies: 65
- Views: 9288
Re: Randall Anderson
Maureen, I will never forget our dinner together during the cross country tour in 2009. Randy often came to our farm for our fall swap meet and always had pie for us at Hershey. Great memories. Let us know if Sheri or I can help you with keeping the cars running. Much love to you both.
- Mon Jan 10, 2022 5:52 am
- Forum: General Discussion Forum
- Topic: So has anyone on the forum fueled their T on Alcohol
- Replies: 14
- Views: 1980
Re: So has anyone on the forum fueled their T on Alcohol
Tim Johnson ran E85 in his all stock 14 touring from New York to Seattle in 2009. No issues whatsoever.
- Sun Jan 02, 2022 9:27 am
- Forum: General Discussion Forum
- Topic: The bowery boys 14 touring
- Replies: 15
- Views: 2488
The bowery boys 14 touring
Every time I see a bowery boys picture I wonder who ended up with their 1914 jalopy. I believe the series ended in 1955-56 and it seems unlikely that the car was not moved on to a collector. Does anyone in the LA area have knowledge of where the car went after the mid fifties. Seems like a pretty im...
- Fri Dec 31, 2021 8:55 pm
- Forum: General Discussion Forum
- Topic: Top Bow rivets
- Replies: 10
- Views: 1779
Re: Top Bow rivets
Go to your local hardware store and ask for shovel handle rivets. They should have them in a jandorf box somewhere. These work great for felloe plate rivets on early wheels.
- Mon Nov 22, 2021 10:21 pm
- Forum: General Discussion Forum
- Topic: KW road smoothers
- Replies: 4
- Views: 1175
Re: KW road smoothers
It has been ten years now and perhaps we need a reminder of the dangers of aftermarket chassis parts that are not made of the same materials that ford used in their parts. The failure of an aftermarket spring perch/shock absorber resulted in the death of Ken Meek during the 2011 MTFCI tour in Minnes...
- Sat Nov 13, 2021 9:12 am
- Forum: General Discussion Forum
- Topic: RIP Don Cusack.
- Replies: 7
- Views: 2128
Re: RIP Don Cusack.
It is often said of people “he can fix anything”. With Don it was true. He once took a bobcat that was burned in a fire and rebuilt it. The hydraulic valves had melted so he made new ones like it was nothing. My early 1909 rear axle had the driveshaft mounting flanges torn away. He made fixtures to ...
- Mon Nov 08, 2021 8:46 am
- Forum: General Discussion Forum
- Topic: French Red Cross Ambulance
- Replies: 20
- Views: 3028
Re: French Red Cross Ambulance
I knew i guy who tied his t down round the frame like that in the last picture. He had a two piece frame after that. Going around the frame like that probably not a good idea. Let her float on the springs instead.
- Sat Nov 06, 2021 10:15 am
- Forum: General Discussion Forum
- Topic: Headlight plumbing
- Replies: 8
- Views: 1696
Re: Headlight plumbing
When i first plumbed my 1914 touring, i lit the headlights and had a flame at the burner, below the burner and outside of the lamp! Later i found the prints for the hoses and they clearly state that the last inch of each hose was to be dipped in shellac. This sealed the hoses nicely and no more mult...
- Sun Oct 24, 2021 7:32 pm
- Forum: Classifieds - Parts
- Topic: 1926-27 wire wheels and hubs
- Replies: 0
- Views: 807
1926-27 wire wheels and hubs
Ten wire wheels and one complete set of hubs. 100 bucks each and 500 for the hub set. Located in southern minnesota one hour south of mpls. Call mark at 507-390-1080
- Sun Oct 24, 2021 3:48 am
- Forum: General Discussion Forum
- Topic: Camerons swap meet pix
- Replies: 8
- Views: 1928
Camerons swap meet pix
It was a perfect 50 degree day with no wind. Great turnout for our 19th swap meet. See you same time next year. Thanks to Sheri, Donna, Jen and Ken for cooking ribs for everyone.
My photos dont meet this sites requirements so check the t totalers fb page for pix.
My photos dont meet this sites requirements so check the t totalers fb page for pix.
- Fri Oct 15, 2021 10:05 am
- Forum: General Discussion Forum
- Topic: Lip on middle drum
- Replies: 32
- Views: 3446
Re: Lip on middle drum
Well said Erik Barrett. Thirty years and over 50k miles on kevlar linings in my 15 touring (including new York to Seattle 2009) has proven to me that they do not effect drums in any adverse way. I have also driven cars with raybestos and wood linings and found chattering to be an issue. The fact is ...
- Thu Oct 14, 2021 10:05 am
- Forum: General Discussion Forum
- Topic: Lip on middle drum
- Replies: 32
- Views: 3446
Re: Lip on middle drum
To suggest that a kevlar band would cause that crack or excessive wear is misleading and not accurate. I have taken apart many engines with this same drum failure that never saw a modern band lining. It happened with cotton back then, and it (cracks)can happen now regardless of band material. The ex...
- Thu Oct 14, 2021 9:55 am
- Forum: General Discussion Forum
- Topic: Camerons swap meet Oct 23.
- Replies: 5
- Views: 1586
Re: Camerons swap meet Oct 23.
You are welcome anytime. Miss your smilin face Dom.
- Thu Oct 07, 2021 9:13 am
- Forum: General Discussion Forum
- Topic: Camerons swap meet Oct 23.
- Replies: 5
- Views: 1586
Camerons swap meet Oct 23.
Our 19th annual swap meet will be held again this year at 5894 lemond rd. Owatonna mn. Indoor heated spaces and outdoor spaces are all free. First come first served. Everyones a vendor. Bring something (anything ) to swap or no ribs for you! Starts 9 am. Large quantity of 1926-1935 ford wire wheels ...
- Sat Oct 17, 2020 5:20 am
- Forum: General Discussion Forum
- Topic: 1914 Runaouts
- Replies: 12
- Views: 2769
Re: 1914 Runaouts
I think the compartment behind the tank was for the side curtians. That way you dont have to get out of the car to get them after its already raining.
- Thu Oct 01, 2020 7:25 pm
- Forum: General Discussion Forum
- Topic: Camerons swap meet new date and other changes
- Replies: 6
- Views: 2227
Camerons swap meet new date and other changes
The 18th annual Camerons swap will be earlier this year. October 24th. 8-3. No food will be served this year and all activity will be restricted to outdoors only. Masks and social distancing will be mandatory. Hope to see you there. 5894 Lemond Rd owatonna mn
- Fri Aug 07, 2020 9:44 am
- Forum: General Discussion Forum
- Topic: replacing touring top
- Replies: 14
- Views: 4836
Re: replacing touring top
We have installed well over 100 tops over the past 25 years. The dimensions in the model t ford owner book are in fact for the 1915-22 top and are very useful. The 23 and later top is a different and much easier top to get right from a kit due to the fixed bow positions(especially at the windshield)...
- Thu Jul 30, 2020 10:35 pm
- Forum: General Discussion Forum
- Topic: Help with ID
- Replies: 26
- Views: 7072
Re: Help with ID
The extra bolts into the cowl above the coil box is a dead giveaway that this is a 1917 or later body that has had a 15-16 hood former scabbed onto it. This car has no true 15-16 features and is likely a 17 model that has been back dated to look like a 16 model.
- Wed Jul 15, 2020 4:19 pm
- Forum: General Discussion Forum
- Topic: Top Material
- Replies: 12
- Views: 4781
Re: Top Material
Larry, i believe the middle strap was eliminated from the top boots well before 25, thus eliminating the need for the special eyelet in the top. BTW i recall being involved with the release of the new top material with Eric Haartz as well. I supplied Steve Coniff with an nos sample of the material t...
- Thu Jul 09, 2020 10:29 pm
- Forum: General Discussion Forum
- Topic: Kevlar band lining sets
- Replies: 28
- Views: 8407
Re: Kevlar band lining sets
The arguement that kevlar cuases drum failure simply does not hold up. I have taken apart over 100 transmissions in the past 25 years and i found many many cracked drums that had only been used with scandanavia or other period lining materials. The fact is that core shifting was very common on these...
- Thu May 28, 2020 9:37 am
- Forum: General Discussion Forum
- Topic: Early Roadster Top Irons
- Replies: 9
- Views: 3405
Re: Early Roadster Top Irons
This is more complex than just the differences (and there are differences) between model years. The fact is that the six manufacturers of top assemblies that were suppliers to ford in this era did not standardize the the dimensions of the steel portion of the top bow assemblies. The variance was ove...
- Sun Mar 22, 2020 3:34 am
- Forum: Classifieds - Parts
- Topic: E and J tail light. 1909-1913
- Replies: 1
- Views: 1412
E and J tail light. 1909-1913
Driver quality original lamp. Missing knob on burner.
$100.00 plus shipping Mark Cameron
Pix available mcam@hughes.net
$100.00 plus shipping Mark Cameron
Pix available mcam@hughes.net
- Fri Mar 20, 2020 10:31 pm
- Forum: General Discussion Forum
- Topic: 1914 Stynoski Runabout
- Replies: 9
- Views: 4459
Re: 1914 Stynoski Runabout
Yes i brass plated any hardware that was brass plated originally. I agree that the top padding has not aged well. Easy to fix. We had it down plenty of times on tours.
- Fri Mar 20, 2020 6:23 am
- Forum: General Discussion Forum
- Topic: 1914 Stynoski Runabout
- Replies: 9
- Views: 4459
Re: 1914 Stynoski Runabout
Looks pretty much like the day i finished it 22 years ago. Must have had pretty good storage. Since completing this car I have also restored a 1909 touring in 2004 and a 1911 touring in 2011 for Stynoski competition along with countless cars for others. I am glad this car has been well cared for. Li...
- Wed Mar 18, 2020 10:04 am
- Forum: General Discussion Forum
- Topic: 26-27 touring body info needed
- Replies: 6
- Views: 2856
Re: 26-27 touring body info needed
Thanks so much everyone. I was able to fab up the missing wood bits and get the backrests installed. Anyone know how the door checks attach in the door and on the body?
- Mon Mar 16, 2020 11:30 am
- Forum: General Discussion Forum
- Topic: 26-27 touring body info needed
- Replies: 6
- Views: 2856
26-27 touring body info needed
I have a 27 in my shop to have interior kit installed and it looks like supports and nailing strips are missing in the front and rear backrest areas. Anybody have photos to share of this area? Also pix of unrestored original seats might be nice to see detials of hip panel and backrest area. Thanks s...
- Tue Feb 11, 2020 9:10 am
- Forum: General Discussion Forum
- Topic: 1909-1917 Rim Nuts
- Replies: 14
- Views: 5972
Re: 1909-1917 Rim Nuts
All the hex examples seem to have a 1917 patent date on them and the round ones by schroeder are patented 1907 or something really early. Thats why the hex ones are easy to find. They came later. It is my opinion that all examples were nickel plated. I have never found any without some trace of nick...
- Thu Nov 14, 2019 9:19 am
- Forum: General Discussion Forum
- Topic: '16 Centerdoor restore...
- Replies: 655
- Views: 163741
Re: '19 Centerdoor restore... :)
My 16 coupelet (yes, at one time i owned two of them)was an un molested survivor right down to the green wool headliner and the frame did have the side holes for the 17 style firewall supports as your frame does. They also showed no signs of ever being used. Apparently they started to get the frames...
- Wed Nov 13, 2019 9:03 am
- Forum: General Discussion Forum
- Topic: '16 Centerdoor restore...
- Replies: 655
- Views: 163741
Re: '19 Centerdoor restore... :)
Don I have admired your work on these wood-intensive cars on this forum for some time. I completed restorations of several late brass era cars myself some years ago. Most recently a 15 coupelet that took herculian efforts of three different woodworking friends to help me complete. I am also a blues ...
- Sun Oct 27, 2019 9:01 pm
- Forum: General Discussion Forum
- Topic: Camerons 18th annual swap meet
- Replies: 4
- Views: 2882
Camerons 18th annual swap meet
Our model t era swap meet will be held nov 9th. 9-3 pm in Owatonna,mn
All spaces are free, heated indoor spaces available. Everyones a vendor. Bring
Something, anything to swap or no ribs for you. For more details/ lodging info contact us
Here or via the Mark Cameron FAcebook page.
All spaces are free, heated indoor spaces available. Everyones a vendor. Bring
Something, anything to swap or no ribs for you. For more details/ lodging info contact us
Here or via the Mark Cameron FAcebook page.