Search found 351 matches

by namdc3
Fri Feb 23, 2024 3:08 pm
Forum: Classifieds - Parts
Topic: Buffalo or House Wire Wheels and Hubs
Replies: 2
Views: 560

Re: Buffalo or House Wire Wheels and Hubs

Sold and delivered. Thanks!
by namdc3
Sun Feb 18, 2024 2:36 pm
Forum: Classifieds - Parts
Topic: Auxiliary Transmissions - Light Muncie and Heavy Muncie
Replies: 2
Views: 629

Auxiliary Transmissions - Light Muncie and Heavy Muncie

Light Muncie - Gears look good with normal wear. Everything spins nice. Under-Direct-Over-Reverse. Roughly 1.78:1 U, 1:1 D, and 0.73:1 O. Were used in Ts and TTs. I don't have the couplers. $325 Heavy Case Muncie (painted one) - Gears look very, very good with exception of underdrive gear on lower s...
by namdc3
Sun Feb 18, 2024 2:35 pm
Forum: Classifieds - Parts
Topic: Buffalo or House Wire Wheels and Hubs
Replies: 2
Views: 560

Buffalo or House Wire Wheels and Hubs

Set of four wheels (30x3.5) and four hubs (2R, 2L) with caps in Model T size. Some might run them, but were it me I would re-rim all four. Two rims have pretty deep pits on the inside and marginally sharp spots. One rear hub has a small crack that could be repaired. I'm happy to answer any questions...
by namdc3
Sun Jan 28, 2024 10:41 am
Forum: Classifieds - Parts
Topic: original APCO 437 Spring Perch Removal Tool
Replies: 14
Views: 1102

Re: original APCO 437 Spring Perch Removal Tool

If you could confirm that this old Etsy listing is not the same puller as yours, I think you’d prove half your point. It has the same jaw notches. The yoke appears to have the same casting glob patterns, though, so I was unsure if it was indeed a second puller of that style or the same one. https://...
by namdc3
Sun Jan 28, 2024 10:33 am
Forum: Classifieds - Parts
Topic: original APCO 437 Spring Perch Removal Tool
Replies: 14
Views: 1102

Re: original APCO 437 Spring Perch Removal Tool

I don’t recall disagreeing. I agree that your puller is a perch pusher - either a factory variant of the more common styles or a modified steering wheel puller. I actually lean more toward factory variant. 437 is definitely not the tool number though. It is on steering wheel, perch, and I believe hu...
by namdc3
Sat Jan 27, 2024 9:26 pm
Forum: Classifieds - Parts
Topic: original APCO 437 Spring Perch Removal Tool
Replies: 14
Views: 1102

Re: original APCO 437 Spring Perch Removal Tool

I believe 437 to be the part number for the yoke, which is shared on at least two tools - the No. 8 perch pusher and No. 2 steering wheel puller.
by namdc3
Sat Jan 27, 2024 8:31 pm
Forum: Classifieds - Parts
Topic: original APCO 437 Spring Perch Removal Tool
Replies: 14
Views: 1102

Re: original APCO 437 Spring Perch Removal Tool

Ed, could you post a photo of your puller on a steering wheel? I have one that doesn’t seem to grip a wheel very well (cast or pressed steel). It certainly doesn’t fit like the one in this 1923 ad. Note that the one in the ad has straight drops, and mine and the one you pictured have a bend. 0604997...
by namdc3
Sat Dec 23, 2023 9:49 am
Forum: General Discussion Forum
Topic: Claude Jockman
Replies: 4
Views: 621

Re: Claude Jockman

I’m sorry to hear that. What a nice gentleman.
by namdc3
Fri Dec 08, 2023 8:56 pm
Forum: General Discussion Forum
Topic: Stevens T-180 Generator Gear Puller
Replies: 16
Views: 755

Re: Stevens T-180 Generator Gear Puller

Thanks! That’s really helpful.
by namdc3
Fri Dec 08, 2023 8:04 pm
Forum: General Discussion Forum
Topic: Stevens T-180 Generator Gear Puller
Replies: 16
Views: 755

Re: Stevens T-180 Generator Gear Puller

Wow! Could you give us the two diameters and two lengths?
by namdc3
Fri Dec 08, 2023 5:25 pm
Forum: General Discussion Forum
Topic: Stevens T-180 Generator Gear Puller
Replies: 16
Views: 755

Re: Stevens T-180 Generator Gear Puller

Here’s the only one I found online, and it appears to have the reduced-diameter punch part broken off at right.
4238DB2C-AFA6-414B-85BE-004A7CF4533E.png
by namdc3
Fri Dec 08, 2023 5:12 pm
Forum: General Discussion Forum
Topic: Stevens T-180 Generator Gear Puller
Replies: 16
Views: 755

Re: Stevens T-180 Generator Gear Puller

Thanks, that’s interesting. The one in the catalog has a punch for the gear pin built in. Maybe they figured out this was a clumsy setup, or maybe yours lost its original too. My handle hole is 5/16”. There is a square dent like some locknuts have, presumably to create an interference fit for the pu...
by namdc3
Thu Dec 07, 2023 10:44 pm
Forum: General Discussion Forum
Topic: Stevens T-180 Generator Gear Puller
Replies: 16
Views: 755

Re: Stevens T-180 Generator Gear Puller

Thanks! It doesn’t look like there is a handle/punch in the one in the box either! Out of curiosity, what tool has the Hassler arm been turned into?
by namdc3
Thu Dec 07, 2023 8:15 pm
Forum: General Discussion Forum
Topic: Stevens T-180 Generator Gear Puller
Replies: 16
Views: 755

Stevens T-180 Generator Gear Puller

I picked up this puller, which is missing the stand and handle/punch. Could anyone with a good one measure exact dimensions of the punch so that I get it right? Thank you.
D649162C-D4B4-4D64-A61F-61C27FCD1DFA.png
3F01EA3F-0B9D-497A-93E2-21A294862A32.jpeg
by namdc3
Wed Nov 01, 2023 11:00 pm
Forum: General Discussion Forum
Topic: Holley G Changeover Question
Replies: 5
Views: 370

Re: Holley G Changeover Question

Thanks for the info. I think the 1915 model year began well before the 1914 model year ended for some body styles and assembly locations, so there were probably “1914” cars with “1915”carburetors. Those are interesting little design details on the running G changes.
by namdc3
Tue Oct 31, 2023 12:26 pm
Forum: General Discussion Forum
Topic: Holley G Changeover Question
Replies: 5
Views: 370

Re: Holley G Changeover Question

Thanks, Dan! I would guess the transition to the dated top plate happened before model year 1914 Model Ts ended production.
by namdc3
Mon Oct 30, 2023 10:30 am
Forum: General Discussion Forum
Topic: Holley G Changeover Question
Replies: 5
Views: 370

Holley G Changeover Question

Ford made 1914 model year cars until roughly April 1915. All the literature I’ve read just says that the Pat Pending top plate is 1914 and the Pat’d 1914 top plate is 1915. Would a late 1914 year model car have the patent dated carb with a black bowl? Does anyone know when the top plate and bowl swi...
by namdc3
Thu Sep 21, 2023 10:45 am
Forum: General Discussion Forum
Topic: Hassler Mounting bolt availability
Replies: 18
Views: 892

Re: Hassler Mounting bolt availability

Just an fyi, some front arms use the longer bolt. So, if anyone decides to pick this project up, please consider making both lengths even though front Hasslers are more popular.
by namdc3
Thu Sep 21, 2023 10:41 am
Forum: General Discussion Forum
Topic: AC brakes
Replies: 13
Views: 736

Re: AC brakes

Here’s an original A-C setup that uses rods. Note that it still uses an equalizer, which imho is better than rod setups that do not.
D217D5A9-14A5-46B5-AB43-B794C4A93A3C.jpeg
by namdc3
Sun Sep 10, 2023 1:28 pm
Forum: Classifieds - Parts
Topic: Buffalo or House Wire Wheels and Hubs
Replies: 6
Views: 1986

Re: Buffalo or House Wire Wheels and Hubs

Back to top
by namdc3
Sat Sep 09, 2023 1:37 pm
Forum: Classifieds - Parts
Topic: Himico Transmission
Replies: 2
Views: 930

Re: Himico Transmission

To the top
by namdc3
Tue Sep 05, 2023 11:56 am
Forum: General Discussion Forum
Topic: In-line fuse in Model T charging systems
Replies: 19
Views: 1016

Re: In-line fuse in Model T charging systems

Regarding the short wire on the back side of the switch, the last two harnesses I’ve gotten have had that jumper made from a smaller gauge wire than originally intended. If no fuse is installed, that is then the weak link in the charging circuit, which in my opinion isn’t ideal. I’ve been making a n...
by namdc3
Mon Sep 04, 2023 3:26 pm
Forum: General Discussion Forum
Topic: HCCT Magneto Coatings - What, if anything, needs to be bare?
Replies: 5
Views: 380

Re: HCCT Magneto Coatings - What, if anything, needs to be bare?

Thanks to Jeff and Frank. My concern on WD-40 is that is won't last and it will attract dirt, etc. Frank, I'm surprised the bare magnets haven't surface rusted in a damp basement. Kansas City humidity would take its toll I think! Yes, Bob is definitely the meter guy! I have purchased from him before...
by namdc3
Sun Sep 03, 2023 9:58 pm
Forum: General Discussion Forum
Topic: HCCT Magneto Coatings - What, if anything, needs to be bare?
Replies: 5
Views: 380

HCCT Magneto Coatings - What, if anything, needs to be bare?

In a car, all of the flywheel and magnet-mounting parts are bare and get continually coated with oil. The field coil ring is coated, but the coil post surfaces are bare. On an HCCT, it would be nice to protect these parts from any future corrosion. This got me to thinking, what surfaces and contact ...
by namdc3
Tue Aug 22, 2023 12:39 pm
Forum: General Discussion Forum
Topic: 17-Z-429 Early Ford Coil Tester
Replies: 9
Views: 795

Re: 17-Z-429 Early Ford Coil Tester

Ron, three of the 17-Z-803 testers above have the output on top, but #4 appears like it might have it on bottom (based on what looks to be a starter notch at bottom right and that I can't see an output block at the top). If true, this would also mean the rear casting that the field coil mounts to is...
by namdc3
Mon Aug 21, 2023 9:43 am
Forum: General Discussion Forum
Topic: 17-Z-429 Early Ford Coil Tester
Replies: 9
Views: 795

Re: 17-Z-429 Early Ford Coil Tester

Then #4...Ron, these two photos came from you. Do you have a photo of the back of it? It seems like the starter notch may be on the lower right, and I can't make out an output terminal at the top of the ring. This indicates to me that the field coil may mount upside down like many other later tester...
by namdc3
Mon Aug 21, 2023 9:37 am
Forum: General Discussion Forum
Topic: 17-Z-429 Early Ford Coil Tester
Replies: 9
Views: 795

Re: 17-Z-429 Early Ford Coil Tester

Thanks, Ron and Don! I'll post photos of the four 17-Z-803 testers that I have saved off of the forum. I have questions for Ron on one of them. Of course, there's Don's posted above. I'll call it #1. Then #2... 17-Z-803 2b.jpeg 17-Z-803 2a.jpeg Then #3... 17-Z-803 3a.jpg 17-Z-803 3b.jpg 17-Z-803 3c....
by namdc3
Sat Aug 19, 2023 8:25 pm
Forum: General Discussion Forum
Topic: 17-Z-429 Early Ford Coil Tester
Replies: 9
Views: 795

17-Z-429 Early Ford Coil Tester

I recently purchased this coil tester, and I thought others may want to see it and offer up any additional thoughts or details. I have more questions than answers, so I think I’ll just start with a list of some observations. • Similar to an 18-Z-245, the 17-Z-429 part numbers are cast onto the vario...
by namdc3
Mon Jul 10, 2023 7:03 pm
Forum: Classifieds - Parts
Topic: No longer needed. - Haul from Detroit area to KC or Chickasha
Replies: 2
Views: 497

No longer needed. - Haul from Detroit area to KC or Chickasha

I was wondering if anyone in the Detroit area could pick something up for me for delivery to Kansas City or Chickasha next year. Thanks.
by namdc3
Sun Jul 09, 2023 8:09 pm
Forum: Classifieds - Parts
Topic: Buffalo or House Wire Wheels and Hubs
Replies: 6
Views: 1986

Re: Buffalo or House Wire Wheels and Hubs

Still for sale.
by namdc3
Tue May 23, 2023 12:43 pm
Forum: Classifieds - Parts
Topic: Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore
Replies: 14
Views: 1926

Re: Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore

Hey, Tom. I'm sorry that I didn't see your original post. I didn't get a notification. I'd prefer not to ship it, so I'll likely drag it to Chickasha again next year.

Gary, no, I don't have the support of the couplers. Sorry.
by namdc3
Sun Apr 30, 2023 11:52 am
Forum: General Discussion Forum
Topic: Generator Vendor Question - Oklahoma
Replies: 2
Views: 387

Re: Generator Vendor Question - Oklahoma

Thanks much!
by namdc3
Sun Apr 30, 2023 10:24 am
Forum: General Discussion Forum
Topic: Generator Vendor Question - Oklahoma
Replies: 2
Views: 387

Generator Vendor Question - Oklahoma

Does anyone know the name of the gentleman or business who was on the east wall of the south building at Chickasha selling rebuilt generators and starters in wooden boxes? I have a club member who may be in need of one. Thanks!
by namdc3
Fri Apr 28, 2023 8:42 am
Forum: Classifieds - Parts
Topic: Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore
Replies: 14
Views: 1926

Re: Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore

Both Muncies available. Updated prices in first post.
by namdc3
Fri Apr 28, 2023 8:40 am
Forum: Classifieds - Parts
Topic: Buffalo or House Wire Wheels and Hubs
Replies: 6
Views: 1986

Re: Buffalo or House Wire Wheels and Hubs

Back to the top
by namdc3
Sat Apr 15, 2023 10:52 am
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

Yes, Mike, thanks for the info! Kevin is going to shoot me some pics.
by namdc3
Thu Apr 13, 2023 9:51 pm
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

Back to top
by namdc3
Sun Apr 09, 2023 2:33 pm
Forum: Classifieds - Parts
Topic: Buffalo or House Wire Wheels and Hubs
Replies: 6
Views: 1986

Re: Buffalo or House Wire Wheels and Hubs

Back to the top
by namdc3
Fri Mar 24, 2023 10:43 pm
Forum: Classifieds - Parts
Topic: Buffalo or House Wire Wheels and Hubs
Replies: 6
Views: 1986

Buffalo or House Wire Wheels and Hubs

With Tulare and Luray coming up, I thought there might be some pickup options. I have decided to part with this set of four wheels (30x3.5) and four hubs (2R, 2L) with caps in Model T size. Some might run them, but were it me I would re-rim all four. Two rims have pretty deep pits on the inside and ...
by namdc3
Fri Mar 24, 2023 5:33 pm
Forum: Classifieds - Parts
Topic: WTB 30 x 3.5 disc wheels
Replies: 5
Views: 645

Re: WTB 30 x 3.5 disc wheels

Happens!! How was it this year. Made it last year during peak gas, according to the regulars, it was smaller than normal. I was hoping the owner would see this and link up with you if still available. It was good! I don't know numbers, but the general feel was about the same as last year - I felt l...
by namdc3
Thu Mar 23, 2023 7:08 pm
Forum: Classifieds - Parts
Topic: WTB 30 x 3.5 disc wheels
Replies: 5
Views: 645

Re: WTB 30 x 3.5 disc wheels

There was a set at Chickasha, but I don’t know the owner.
by namdc3
Wed Mar 22, 2023 12:37 pm
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

Still on the hunt for an original set of A-Cs.
by namdc3
Mon Mar 20, 2023 1:43 pm
Forum: General Discussion Forum
Topic: Some more Chickasha pics and finds
Replies: 29
Views: 2469

Re: Some more Chickasha pics and finds

It's always interesting to see the things you missed out on or just didn't see. Thanks for posting. "1/2 as big as it used to be" is still more than you can truly lay eyes on in 2-3 days. I wish people who can't justify it in their own minds wouldn't run it down for other folks. If you get out and h...
by namdc3
Sun Mar 19, 2023 11:25 am
Forum: General Discussion Forum
Topic: Moore Auxilury Transmission Help
Replies: 7
Views: 721

Re: Moore Auxilury Transmission Help

Matthew, you purchased this trans from me, and I’ll offer up various theories set forth from others on this trans. The leading suspicion is that it is a car version that originally bolted to the rear end like normal but that has had the front housing from a TT version bolted to the rear of the car v...
by namdc3
Sun Mar 19, 2023 9:24 am
Forum: General Discussion Forum
Topic: No pictures from Chickasha?
Replies: 5
Views: 1298

Re: No pictures from Chickasha?

A great time as always. I sold a lot and bought a lot. I got a couple of Weaver Auto Twin Jacks, an original ruckstell shift link rod, part of a set of very early pre-beehive hasslers to hang on the wall, a Chicago Mark-E trans, an original metal battery box cover, etc, etc, etc. It’s also great to ...
by namdc3
Sat Mar 18, 2023 9:45 pm
Forum: Classifieds - Parts
Topic: Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore
Replies: 14
Views: 1926

Re: Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore

Awesome! I’m glad to hear that! It sure shifted nice, and I’m glad the gears look good! The Muncies haven’t sold, so if anyone is through Kansas City sometime and wants one or two, let me know.
by namdc3
Mon Mar 13, 2023 5:41 pm
Forum: General Discussion Forum
Topic: Why Do You Like Chickasha ?....
Replies: 12
Views: 1478

Re: Why Do You Like Chickasha ?....

It's great for buying and selling big/heavy things that are difficult or expensive to ship! There is also plenty of eye candy, and it's all relevant to the hobby as opposed to most swap meets. Is it as big as it used to be? No. Is it more than you can lay eyes on in two days and truly see everything...
by namdc3
Sun Mar 12, 2023 7:52 pm
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

One last pre-Chickasha college try
by namdc3
Thu Mar 09, 2023 8:45 am
Forum: Classifieds - Parts
Topic: Himico Transmission
Replies: 2
Views: 930

Re: Himico Transmission

To the top
by namdc3
Wed Mar 08, 2023 8:54 pm
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

Thanks, Steve. Those Lockwoods look like a good design, too, per our emails. It looks like they bias a little more forward braking but still have some self-energizing effect in reverse. Still in the market for original A-Cs if they surface!
by namdc3
Wed Mar 08, 2023 6:28 pm
Forum: Classifieds - Parts
Topic: Pasco Wire Wheels and Hubs
Replies: 3
Views: 957

Re: Pasco Wire Wheels and Hubs

Sold pending payment. Thank you!
by namdc3
Wed Mar 08, 2023 3:07 pm
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

still hoping
by namdc3
Tue Mar 07, 2023 8:39 pm
Forum: Classifieds - Parts
Topic: Pasco Wire Wheels and Hubs
Replies: 3
Views: 957

Pasco Wire Wheels and Hubs

Two Pasco wheels and two hubs with nuts but no caps. One wheel is missing one spoke. I'm happy to answer any questions I can. Pick up in Kansas City metro area or free delivery to Chickasha. $1000.
IMG-9158.png
IMG-9159.png
IMG-9160.png
IMG-9166.png
by namdc3
Tue Mar 07, 2023 4:57 pm
Forum: Classifieds - Parts
Topic: WTB: Hassler Springs with Part Numbers
Replies: 12
Views: 1263

Re: WTB: Hassler Springs with Part Numbers

While you're packing for Chickasha, check for spring numbers!
by namdc3
Sun Mar 05, 2023 8:27 pm
Forum: Classifieds - Parts
Topic: Himico Transmission
Replies: 2
Views: 930

Himico Transmission

This Himico accessory transmission made by Hinkley Motors replaces Ford's planetary gear transmission with a 3-speed+R sliding gear, lever shifted transmission and pan. It retains a rearward transmission drum brake and does not require shortening the drive shaft. This unit also has the optional auxi...
by namdc3
Sun Mar 05, 2023 8:03 pm
Forum: Classifieds - Parts
Topic: Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore
Replies: 14
Views: 1926

Auxiliary Transmissions - Light Muncie, Heavy Muncie, and Moore

Light Muncie - Gears look good with normal wear. Everything spins nice. Under-Direct-Over-Reverse. Roughly 1.78:1 U, 1:1 D, and 0.73:1 O. Were used in Ts and TTs. I don't have the couplers. $350 Heavy Case Muncie (painted one) - Gears look very, very good with exception of underdrive gear on lower s...
by namdc3
Sat Mar 04, 2023 9:38 am
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

Weekend bump
by namdc3
Mon Feb 27, 2023 10:33 am
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

Still on the hunt
by namdc3
Tue Feb 21, 2023 6:08 pm
Forum: Classifieds - Parts
Topic: WTB: Hassler Springs with Part Numbers
Replies: 12
Views: 1263

Re: WTB: Hassler Springs with Part Numbers

Thanks, Steve. I have a few with hints of color, but it’s hard telling what happened over the years. I’d like to get together enough stamped springs to characterize what is what from dimensional and spring rate perspectives - the idea being that that data could then be applied to non-stamped springs...
by namdc3
Tue Feb 21, 2023 5:56 pm
Forum: Classifieds - Parts
Topic: WTB: Hassler Springs with Part Numbers
Replies: 12
Views: 1263

WTB: Hassler Springs with Part Numbers

I’d like to buy Hassler beehive springs that are stamped with their part number. Below are examples of a 39 and a 40 with the location of the stamped number circled in red. Can also pick up at Chickasha. Thanks.
B0CEE427-00FE-4D41-B1D6-7388059741E6.jpeg
71DD66F9-DCE7-4B35-9EFD-745342431298.jpeg
by namdc3
Sun Feb 19, 2023 10:39 am
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

Re: WTB: Original A-C Brakes

EC986E49-D49D-4BA2-AD5D-9A5A2BB15D5C.jpeg
by namdc3
Fri Feb 17, 2023 1:25 pm
Forum: Classifieds - Parts
Topic: WTB: Original A-C Brakes
Replies: 13
Views: 1884

WTB: Original A-C Brakes

I would like to buy an original small drum A-C Brake system like shown here. I would settle for the brakes themselves if no one has the rest of the setup for sale. Not taking anything away from the excellent reproductions, but I'd like to find an original set. Thanks! 20220515_184012.jpg 810120.jpg
by namdc3
Sun Feb 12, 2023 11:08 pm
Forum: General Discussion Forum
Topic: ID auxiliary transmission case
Replies: 2
Views: 466

Re: ID auxiliary transmission case

I can see the light! Thanks!
by namdc3
Sun Feb 12, 2023 10:49 pm
Forum: General Discussion Forum
Topic: ID auxiliary transmission case
Replies: 2
Views: 466

ID auxiliary transmission case

Can anyone ID this case for me?
B40D5857-CE82-4E76-8572-1B0A85CE420F.jpeg
3CFA36CD-B36B-4DD7-8200-17199B46B776.jpeg
57FCAD2D-D926-41BA-AFF2-482073375A3B.jpeg
8125C50A-9C93-49FC-A0E8-051523B0C6A8.jpeg
BB6007B5-8861-4973-B0B7-D2A35228FA3A.jpeg
by namdc3
Sat Feb 04, 2023 12:26 pm
Forum: General Discussion Forum
Topic: Voltage Regulator Instructions
Replies: 17
Views: 2062

Re: Voltage Regulator Instructions

Thanks! This is perfect.
by namdc3
Sat Feb 04, 2023 11:35 am
Forum: General Discussion Forum
Topic: Voltage Regulator Instructions
Replies: 17
Views: 2062

Voltage Regulator Instructions

Could someone send me or post the original instructions for a Fun Projects 6V regulator? Thanks!
by namdc3
Sat Jan 14, 2023 2:29 pm
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 6
Views: 2477

Re: HIMICO Transmission

Free delivery to Chickasha. Open to offers.
by namdc3
Sat Jan 07, 2023 10:31 pm
Forum: General Discussion Forum
Topic: Ford Script on Period Non-Ford Spark Plugs
Replies: 1
Views: 487

Ford Script on Period Non-Ford Spark Plugs

Does anyone know the story on spark plugs with Ford scripts that aren’t Ford? I assume it was fairly frequent for companies to use it without permission and get sued. Many others used the Ford name without the script, and still others used a similar script that didn’t actually say Ford to try to sim...
by namdc3
Sun Dec 18, 2022 2:56 pm
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 6
Views: 2477

Re: HIMICO Transmission

Back to top
by namdc3
Fri Dec 16, 2022 12:20 pm
Forum: Classifieds - Parts
Topic: FUN PROJECTS 6v Voltage Regulator
Replies: 5
Views: 932

Re: FUN PROJECTS 6v Voltage Regulator

I will take it!
by namdc3
Tue Nov 01, 2022 6:44 pm
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 6
Views: 2477

Re: HIMICO Transmission

Back to top
by namdc3
Thu Oct 27, 2022 11:59 am
Forum: General Discussion Forum
Topic: Ford Script Kelsey Demountable Rim
Replies: 2
Views: 615

Re: Ford Script Kelsey Demountable Rim

I noticed that, Allan. I don’t know if late felloes were designed to universally accept both footed and non-footed lugs, or if those were modified. I also don’t know if those steel spoke wheels just happen to use Kelsey 188 felloes or if those are fully Kelsey wheels. Is the 188 rim made for the 188...
by namdc3
Wed Oct 26, 2022 2:54 pm
Forum: General Discussion Forum
Topic: Ford Script Kelsey Demountable Rim
Replies: 2
Views: 615

Ford Script Kelsey Demountable Rim

Hi. I’d like to know more information about this rim. It is a Ford 2845B style rim made by Kelsey. One lug is marked with a K and Ford script. On the inside, it is stamped No. 188 and has the same Kelsey stampings (name and patent information) as the fellows in this old post. This rim also has a fai...
by namdc3
Thu Oct 20, 2022 7:59 pm
Forum: Classifieds - Parts
Topic: For Sale: Thinning Out My Collection !
Replies: 28
Views: 4362

Re: For Sale: Thinning Out My Collection !

Received my goodie; thanks!
by namdc3
Wed Sep 28, 2022 12:04 am
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 6
Views: 2477

Re: HIMICO Transmission

Still looking for a good home.
by namdc3
Tue Sep 06, 2022 7:37 pm
Forum: General Discussion Forum
Topic: Aermore exhaust horn tube length
Replies: 11
Views: 1274

Re: Aermore exhaust horn tube length

Steve, last we emailed each other yours was 9-1/2” OAL, which I suspect is the 10” motorcycle version. The advertised lengths vary somewhat from the actual lengths. This photo shows two that I believe are 10” versions. While yours is slightly shorter than these two, I would expect an 8” to be just s...
by namdc3
Tue Sep 06, 2022 6:58 pm
Forum: General Discussion Forum
Topic: Aermore exhaust horn tube length
Replies: 11
Views: 1274

Re: Aermore exhaust horn tube length

This photo shows what I believe is every size, with the possible exception of the 8” OAL motorcycle whistle if they ever made it. It is listed in some advertisements, but I haven’t come across one. They are probably out there somewhere. Generally, the size listed for the T was the second from left, ...
by namdc3
Tue Sep 06, 2022 6:38 pm
Forum: General Discussion Forum
Topic: Aermore exhaust horn tube length
Replies: 11
Views: 1274

Re: Aermore exhaust horn tube length

Mark, the short answer is 13” for your particular exhaust horn. Fulton/Aermore was inconsistent through the years, and there are short No. 2 horns/whistles and long No. 2 horns/whistles. Yours is a long and has 1-1/8” OD tubes. It is the same in both tube lengths and diameters as most No. 1s. The sh...
by namdc3
Tue Aug 23, 2022 12:24 pm
Forum: General Discussion Forum
Topic: AC brake linkage
Replies: 15
Views: 2109

Re: AC brake linkage

I, too, would use cable, but I like to post this picture every time Larry says that. It's true that most were cable, but...
AC Rods.jpg
by namdc3
Mon Aug 22, 2022 8:54 am
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 6
Views: 2477

Re: HIMICO Transmission

Back to the top. Open to offers.
by namdc3
Tue Jul 26, 2022 8:15 am
Forum: General Discussion Forum
Topic: High beam vs low beam headlights?
Replies: 31
Views: 2962

Re: High beam vs low beam headlights?

Keep in mind the T has Dim and On, or “standing” and “on.” This was achieved with different cp filaments. There are many variations of bulbs that try to modernize the system to a high/low.
by namdc3
Mon Jul 25, 2022 8:53 pm
Forum: General Discussion Forum
Topic: Stamped Hassler Spring Data
Replies: 0
Views: 517

Stamped Hassler Spring Data

I am putting out a request for some data on stamped Hassler springs. My hope is that as a collective unit, we can piece together data on stamped springs such that unstamped springs can be identified by measurable aspects such as wire diameter and free height. I have a 39 and a pair of 40 springs (al...
by namdc3
Sat Jun 25, 2022 10:41 am
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 6
Views: 2477

Re: HIMICO Transmission

IMG_0944.JPG
IMG_0947.JPG
IMG_0945.JPG
IMG-0964.jpg
IMG-6443.jpg
by namdc3
Sat Jun 25, 2022 10:40 am
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 6
Views: 2477

HIMICO Transmission

This Himico accessory transmission made by Hinkley Motors replaces Ford's planetary gear transmission with a 3-speed+R sliding gear, lever shifted transmission and pan. It retains a rearward transmission drum brake and does not require shortening the drive shaft. This unit also has the optional auxi...
by namdc3
Tue Apr 26, 2022 5:25 pm
Forum: Classifieds - Parts
Topic: Original HCCT
Replies: 2
Views: 1151

Re: Original HCCT

Very nice Service Station Equipment Company example.
by namdc3
Wed Mar 23, 2022 9:54 pm
Forum: General Discussion Forum
Topic: Questions on How to Ship Wheels
Replies: 11
Views: 2087

Re: Questions on How to Ship Wheels

Thanks for all of the ideas.
by namdc3
Mon Mar 21, 2022 8:33 pm
Forum: General Discussion Forum
Topic: Questions on How to Ship Wheels
Replies: 11
Views: 2087

Questions on How to Ship Wheels

I was wondering the best/easiest/cheapest way to ship T wheels within the USA. I am interested both in shipping wheels to Stutzman for rebuild and in selling some other wheels/rims and potentially shipping to the buyer(s). I’d be interested to hear others’ good and bad experiences, what carriers the...
by namdc3
Sat Mar 12, 2022 12:11 pm
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 8
Views: 2143

Re: HIMICO Transmission

Still available. Would like to know by Tuesday whether it needs to be loaded or not. Thanks.
by namdc3
Fri Mar 04, 2022 8:41 am
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 8
Views: 2143

Re: HIMICO Transmission

Open to reasonable offers
by namdc3
Sun Feb 27, 2022 3:06 pm
Forum: Classifieds - Parts
Topic: HIMICO Transmission
Replies: 8
Views: 2143

Re: HIMICO Transmission

Oops, sorry about that. Edited it in.