MTFCA Forum

I like it great find.

Hey Dan how about a picture of the car.

Leave the brackets off they will crack the firewall.

Sent you an email

Pat the body had 3 hole mount we filled them I didn't want a spare tire mount on the car for the Montana 500. Here is a picture of the body in the body shop.I carried the spare in the trunk.

Here are some pictures of that Coupelet at the 2012 Can Am Bremerton tour

Pat what you have on your car is a cherry bomb glass pack,you can turn it around and it changes the noise.

I have used a trans shaft which is the same size with time saver and was able to get a good fit.

NOS set $50.00 plus shipping.

Could you post pictures of engine.

Sure would like to have that car back.

Just a thought .Ball cap could be loose & need a shim.

My method is using 1965 & earlier VW shocks front & rear.They work very well as Tom says the rear make the big difference.

My method is using 1965 & earlier VW shocks front & rear.They work very well as Tom says the rear make the big difference.

Is this what your looking for. $40.00 plus shipping

Ruckstell Parts new price

Misc. Ruckstell used parts the left differetial housing has a crack.Sold as a group.$150.00 includes shipping.
NEW PRICE

I sent you an email I have one. Bill

They are model T

Yes still for sale.

I will take #4 spark plug set. Bill

Some corrections I misunderstood owner on price they want $ 20,000.It also has an E timer.

Spokane Washington

1926 Model T running chassis,Ruckstell axle,wire wheels,honeycomb radiator,Firestone tires,cowling,rebuilt carb.
Newday timer,runs on mag,new spark plugs & wires.Engine runs & sounds good but has a warped exhaust manifold .Price $3950.00 No title

I have most of the interior left over from my restore on my 1927 Tudor

No rear seating,does have rocky mountain brakes,very well cared for car

Still For Sale

I have what you are looking for.Came out of this car.

Here is mine 1927 tudor

Green one sold, location Spokane Wa.

thumbnail larry's depot hack.jpg Listing for club member in declining health.1925 Depot Hack excellent condition,pictures speak for them selves.Ruckstell axle left hand shift,complete set of curtains.$ 15000.00 thumbnail rear depot hack.jpg thumbnail larry's depot hack.jpg IMG_4399 (1).JPG IMG_4400...

Pat remember your car is a Montana 500 car a leaf was removed front & rear to lower car.

Thank You Ron

I have a set of the radials on my 1927 Tudor they handle very good.One thing I have noticed the circumference is 4 inches more than the Lucas that I had on which affects the hill climbing.

Are you using non ethanol gas .

They look like ones I have on my 1927 Tudor.Mine are after market Buckeyes

See Montana 500 rule B21
http://www.antiqueautoranch.com/montana ... fresh.html

Thanks Matt

Car inspections & registrations are today.Event starts Monday morning.

The tail light is original has been converted to have brake light also.I have seen 26/27 coupes with original Gun Metal Blue paint.Tudor's came in Fawn Gray,Highland Green,Royal Maroon and Black I guess.
They don't list Tudors coming in Gun Metal Blue but I do what I like.

My 1927 Tudor painted Gun Metal Blue

We who run the Montana 500 experience this usually between 48 to 51 mph we refer to it as the thrum.Not all engines do this.

Being you have 26/27 spindles you need the correct drag link.The correct drag link is 30 13/16 in length.
Besides measuring the drag link you can point the front wheels straight forward and pitman arm should be vertical.

You can use a product called Rubber Glyide that you can get at NAPA stores.

If the pin that guides the key is broken or loose I have used a 90 degree pick to trip the latch.

I would like know what kind of tires he has.

Clutch spring compressor

Couple of pictures of this year Montana 500 at a time out that I liked.

These are some of my favorites.Sergio sporting his new Montana 500 belt.

I sold Dennis Powers the car he drove and a extra engine.I drove the car in 2 Montana 500's,the engines & car I personally built.Me and Dennis talked many times about our cars as far as I know the engine crank, babbitt,bearings,cam were as I installed them no take up on the bearings.Thanks to Rick C...

Search found 51 matches