Looking for a loose 26/27 steering shaft. Doesn’t have to have the mounting bracket or pitman arm.
mikebird@lifeattheridge.net
Search found 1098 matches
- Tue Apr 16, 2024 9:37 pm
- Forum: Classifieds - Parts
- Topic: WTB 26/27 Steering shaft
- Replies: 0
- Views: 39
- Tue Apr 16, 2024 12:20 pm
- Forum: General Discussion Forum
- Topic: Stewart Speedometer Cable question
- Replies: 3
- Views: 175
Re: Stewart Speedometer Cable question
Thanks guys!
- Tue Apr 16, 2024 5:56 am
- Forum: General Discussion Forum
- Topic: Stewart Speedometer Cable question
- Replies: 3
- Views: 175
Stewart Speedometer Cable question
Can anyone that has an original Stewart brass cable with knurled nuts on both ends please tell me the width of the knurled band section on the nut?
- Tue Apr 09, 2024 1:16 pm
- Forum: Classifieds - Parts
- Topic: WTB 26-27 Steering gear case
- Replies: 1
- Views: 178
WTB 26-27 Steering gear case
Looking for a 26-27 steering gear case. If you have the complete column that's fine too.
Thanks
Mike Bird
mikebird@lifeattheridge.net
Thanks
Mike Bird
mikebird@lifeattheridge.net
- Mon Apr 08, 2024 12:13 pm
- Forum: General Discussion Forum
- Topic: paint cost
- Replies: 30
- Views: 1655
Re: paint cost
I've followed this guy's videos for quite some time and he will walk you through all the steps of painting your own car as a beginner even using a HF gun with great results.
https://www.youtube.com/@PaintSociety
https://www.youtube.com/@PaintSociety
- Thu Apr 04, 2024 8:12 pm
- Forum: Classifieds - Parts
- Topic: WTB 1912 Rear End
- Replies: 2
- Views: 353
Re: WTB 1912 Rear End
Bill,
Are you looking for clamshell or later 12?
Are you looking for clamshell or later 12?
- Wed Apr 03, 2024 8:14 am
- Forum: Classifieds - Parts
- Topic: WTB Steering Column for 1912
- Replies: 24
- Views: 907
Re: WTB Steering Column for 1912
Can anyone provide a picture of the different steering columns and when they were produced or I the cars. I have no idea what I have in my 12 but it would be nice if I knew. Frank here’s some interesting information about early steering columns http://www.mtfca.com/discus/messages/80257/89355.html?...
- Wed Apr 03, 2024 8:09 am
- Forum: Classifieds - Parts
- Topic: WTB Steering Column for 1912
- Replies: 24
- Views: 907
Re: WTB Steering Column for 1912
My engine number is 86076 so was a late 11 build date. Therefore, it would have used the "knob type" levers on the steering column, i.e., the hard rubber balls on the end of the spark and throttle lever. If you have a late 11 build date then the column that you should have is the one with 4 holes a...
- Wed Apr 03, 2024 7:56 am
- Forum: Classifieds - Parts
- Topic: WTB Steering Column for 1912
- Replies: 24
- Views: 907
Re: WTB Steering Column for 1912
Yes. In 12 It was mounted 3/4” lower on the firewall which required a new steering bracket and steering column flange to make the correct angle. It’s very important to have the correct parts for your steering setup.
- Tue Apr 02, 2024 7:50 pm
- Forum: General Discussion Forum
- Topic: E&J headlights
- Replies: 7
- Views: 565
Re: E&J headlights
I have received the same email in the past from Veteran Auto. I recommend contacting Gilbert Metal out in El Cajon CA. Talk with Roger Erickson. They made the E and J headlights and some other brass stuff. I purchased a set of headlights from them a while back and they are absolutely beautiful. Roge...
- Tue Apr 02, 2024 7:00 pm
- Forum: Classifieds - Parts
- Topic: WTB Steering Column for 1912
- Replies: 24
- Views: 907
Re: WTB Steering Column for 1912
The lower mounting flange is different as well. It went from a cast piece to a stamped piece.
- Mon Apr 01, 2024 5:49 pm
- Forum: Classifieds - Parts
- Topic: Rubes double threaded reed and sleeves SOLD
- Replies: 1
- Views: 279
Rubes double threaded reed and sleeves SOLD
Here is a Rubes reed that is double threaded. This is correct for late 12-14. The reed is placed on the bulb end. This came out of an original Rubes rubber bulb. I think the threads are the 41/64 x27 but could be wrong. The other sleeve end still has some horn tubing remnants inside. $30 plus shippi...
- Wed Mar 27, 2024 6:51 pm
- Forum: Classifieds - Parts
- Topic: Delivery Car Fender Irons
- Replies: 13
- Views: 2138
Re: Delivery Car Fender Irons
Mike, any thought on how much for the finished product, I think something like this would work well on my "home-made pickup. George Hand George, I had these casted back in 2022 for my Delivery Car project and only made a small run of them for those who requested them. At the time they were $125/pai...
- Wed Mar 27, 2024 5:32 pm
- Forum: Classifieds - Parts
- Topic: Delivery Car Fender Irons
- Replies: 13
- Views: 2138
Re: Delivery Car Fender Irons
Keith, unfortunately it is not. Those are the standard 13 fender irons that someone has bent the mounting pad up. On the delivery car irons the iron towards the bottom of the pad. Before making my own I thought of modifying 13 irons, but just too much work. Here are the ones I had casted. IMG_1738.j...
- Wed Mar 27, 2024 1:58 pm
- Forum: Classifieds - Parts
- Topic: WTB Stewart Speedo Cable Housing End
- Replies: 0
- Views: 171
WTB Stewart Speedo Cable Housing End
Looking for this cable housing end.
Shoot me an email if you have one. mikebird@lifeattheridge.net
Thanks!
Shoot me an email if you have one. mikebird@lifeattheridge.net
Thanks!
- Thu Mar 21, 2024 8:26 am
- Forum: General Discussion Forum
- Topic: photo of a 1912 piewagon
- Replies: 1
- Views: 361
Re: photo of a 1912 piewagon
Great picture Herb! From the looks of it an early regular body.
- Sun Mar 17, 2024 8:49 am
- Forum: General Discussion Forum
- Topic: 20 something’s and Model Ts
- Replies: 1
- Views: 392
20 something’s and Model Ts
I came across this video that shows the hosts in their 20 something’s that not only own a model T but actually know what they are doing. I think this is great because for those who think that the Model T hobby is dying, seems like there are plenty of young people who are not only interested, but act...
- Sat Mar 16, 2024 12:25 am
- Forum: General Discussion Forum
- Topic: Brass windshield support rods
- Replies: 5
- Views: 862
Re: Brass windshield support rods
Here’s the drawing of the rods on The Henry Ford website. You can purchase a high resolution drawing for $7
https://www.thehenryford.org/collection ... =gs-337373
https://www.thehenryford.org/collection ... =gs-337373
- Thu Mar 14, 2024 9:33 pm
- Forum: Classifieds - Parts
- Topic: Phinney-Walker all brass dash clock SOLD
- Replies: 3
- Views: 353
Re: Phinney-Walker all brass dash clock F/S
Here’s what the correct mounting bracket, screw that holds it together and screw cover for the bottom hole looks like.
- Tue Mar 05, 2024 10:20 am
- Forum: Classifieds - Parts
- Topic: Corcoran burner complete FS
- Replies: 1
- Views: 335
Re: Corcoran burner complete FS
To the Top
- Tue Mar 05, 2024 10:20 am
- Forum: Classifieds - Parts
- Topic: E and J burner complete FS
- Replies: 1
- Views: 367
Re: E and J burner complete FS
To the Top
- Sun Mar 03, 2024 7:01 pm
- Forum: General Discussion Forum
- Topic: Delivery Car Project Build
- Replies: 126
- Views: 15227
Re: Delivery Car Project Build
Made some more progress today. Cut out the other side top section and cut out both bottom sections as well. I clamped one side in place to get a visual. Next I’ll tackle the metal for the doors.
- Fri Mar 01, 2024 5:46 pm
- Forum: General Discussion Forum
- Topic: Delivery Car Project Build
- Replies: 126
- Views: 15227
Re: Delivery Car Project Build
Making some more progress. Finally got all the sheetmetal for the exterior ordered and cut down to size. Made up some templates and started cutting out the drivers side top piece. I used an air nibbler tool from Harbor Freight to cut out the shape. That tool was the best $70 I spent. It cuts it out ...
- Tue Feb 27, 2024 7:21 pm
- Forum: General Discussion Forum
- Topic: I'm going screwy looking for screws.
- Replies: 18
- Views: 957
Re: I'm going screwy looking for screws.
I got all my hardware from blacksmith bolt for my Delivery Car build.
They carry period correct screws and bolts
https://blacksmithbolt.com/pages/slott ... ood-screws
They carry period correct screws and bolts
https://blacksmithbolt.com/pages/slott ... ood-screws
- Thu Feb 22, 2024 11:51 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
Very good thoughts here guys. Very helpful. I especially like the nail holding pliers. I ordered a set should be here tomorrow. I also decided to use a #16 gauge brad nail with a head. Unfortunately I can’t find them any shorter than 3/4” so I’m going to be modifying a lot of them to be about 5/8” I...
- Thu Feb 22, 2024 8:42 am
- Forum: General Discussion Forum
- Topic: Good selling price for a 1911?
- Replies: 23
- Views: 1468
Re: Good selling price for a 1911?
$36,000 yikes!Dan Hatch wrote: ↑Thu Feb 22, 2024 8:11 amCheck this one out !!!!
https://bids.auctionbypearce.com/auctio ... rd-model-t
- Sat Feb 17, 2024 6:42 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
I learned a few things along the way as a maintenance mechanic when building sheet metal AC duct work and large exhaust fan housings. When attaching metal panels to framework MAKE SURE THE FRAMEWORK OR SURFACE IS LEVEL. ESPECIALLY WHERE THEIR IS CONNECTING JOINTS. FROM TOP TO BOTTOM AND SIDE TO SID...
- Sat Feb 17, 2024 6:41 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
Having worked with very large metal panels for a good amount of time. Heat is your best friend. If when the panel that is secured is warmer than the frame or support it is installed on that when it cools it will be taunt & smooth. Oil canning is a issue that will take up tons of time to correct. Ju...
- Sat Feb 17, 2024 6:37 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
Is there any way to use one piece of sheet metal per side instead of several smaller overlapping pieces? It seems like there will be less chance of buckling or warpage if only one piece is used to span the large gaps between the slats. When nailing thin sheet metal sheets, to ensure they are flat, ...
- Sat Feb 17, 2024 6:21 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
Thanks Jack!Jack Putnam, in Ohio wrote: ↑Fri Feb 16, 2024 7:22 pmSome woods have better nail holding characteristics than others. Maple is not the best, especially hard maple. Nails will split the maple and it is very hard to nail without bending the nails. Pre drill it to prevent splitting. Screws will hold better than short nails
- Sat Feb 17, 2024 6:19 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
My chocolate van I panelled with aluminium sheets. Because the original van had C mouldings around the edges and at the joins in the panels, any fixings were hidden. I could use 3/4" nails with annular rings for the job. If you can find same in stainless steel, these will be less likely to bend whe...
- Sat Feb 17, 2024 6:13 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
Pep C Strebeck wrote: ↑Fri Feb 16, 2024 5:55 pmYou might give these guys a look, maybe the trunk tacks would work;
Thanks! I’ll check them out.
https://dbgurney.com/
I have bought a bunch of stuff from them over the years, most recently tacks for the Runabouts interior.
- Sat Feb 17, 2024 6:12 am
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Re: Installing metal panels best practices
Good point Dan. I’ve spoken with Karen before but not her son. Karen was a little limited with the “how to” but provided some great pictures.Dan McEachern wrote: ↑Fri Feb 16, 2024 5:38 pmMike- you might call Karen B.- she will probably know what Bill used on his bodies and if not, Bill's son may well be able to help you.
- Fri Feb 16, 2024 4:37 pm
- Forum: General Discussion Forum
- Topic: Installing metal panels best practices
- Replies: 24
- Views: 1388
Installing metal panels best practices
I need some advice, pointers, and tips. I have all my metal panels for the next phase of the Delivery Car project and need some pointers when it comes to fastening them to the wood frame. The floors are ash 1" thick, the rest of the framing is Hard Maple and mostly 3/4" thick where it will be nailed...
- Wed Feb 14, 2024 11:28 am
- Forum: Classifieds - Parts
- Topic: E and J black and brass light fonts SOLD
- Replies: 1
- Views: 347
Re: E and J black and brass light fonts SOLD
Both are sold. Thanks!
- Mon Feb 12, 2024 5:31 pm
- Forum: General Discussion Forum
- Topic: Sic transit . . .
- Replies: 8
- Views: 869
Re: Sic transit . . .
Yes… I ventured in to the hobby in my early 30s. I’m 40 now. This forum has a treasure trove of great info. I wish the previous forums could be searchable like the newer one is… I’m documenting my T build on YouTube so others can be inspired and know how it is put together. You all are a great bunch!
- Mon Feb 12, 2024 2:23 pm
- Forum: Classifieds - Parts
- Topic: 23-25 side lamp bracket for open car SOLD
- Replies: 1
- Views: 264
23-25 side lamp bracket for open car SOLD
I have 1 side lamp bracket for 23-25 open car
Cast out of heavy brass. $10 plus shipping
mikebird@lifeattheridge.net
Cast out of heavy brass. $10 plus shipping
mikebird@lifeattheridge.net
- Mon Feb 12, 2024 2:19 pm
- Forum: General Discussion Forum
- Topic: Help identify this bracket
- Replies: 5
- Views: 322
Re: Help identify this bracket
Thanks guys!
- Mon Feb 12, 2024 1:06 pm
- Forum: General Discussion Forum
- Topic: Help identify this bracket
- Replies: 5
- Views: 322
- Mon Feb 12, 2024 12:50 pm
- Forum: General Discussion Forum
- Topic: Help identify this bracket
- Replies: 5
- Views: 322
Help identify this bracket
I got this bracket… I can’t identify it. It’s made of heavy brass and painted black. Any help?
- Mon Feb 12, 2024 12:41 pm
- Forum: Classifieds - Parts
- Topic: Brass oil cap SOLD
- Replies: 0
- Views: 340
- Mon Feb 12, 2024 12:27 pm
- Forum: Classifieds - Parts
- Topic: E and J black and brass light fonts SOLD
- Replies: 1
- Views: 347
E and J black and brass light fonts SOLD
I have two E and J black and brass side light/tail light Fonts. Needs cleaning/polishing/ painting. Bayonet style for the burners.
$25 a piece
mikebird@lifeattheridge.net
$25 a piece
mikebird@lifeattheridge.net
- Mon Feb 12, 2024 12:19 pm
- Forum: Classifieds - Parts
- Topic: E and J burner complete FS
- Replies: 1
- Views: 367
E and J burner complete FS
E and J burner. Turns freely and nicely. Wheel has a crack see photo. Vendors are currently out of stock.
Great for an original survivor. Included is an extra burner cover. $35 plus shipping
mikebird@lifeattheridge.net
Great for an original survivor. Included is an extra burner cover. $35 plus shipping
mikebird@lifeattheridge.net
- Mon Feb 12, 2024 12:12 pm
- Forum: Classifieds - Parts
- Topic: Corcoran burner complete FS
- Replies: 1
- Views: 335
Corcoran burner complete FS
Here’s a nice burner for a Corcoran sidelight/taillight
The wheel is stamped Corcoran Cinti. O
Wheel turns really nice. $60 plus shipping
mikebird@lifeattheridge.net
The wheel is stamped Corcoran Cinti. O
Wheel turns really nice. $60 plus shipping
mikebird@lifeattheridge.net
- Mon Feb 12, 2024 12:00 pm
- Forum: Classifieds - Parts
- Topic: E and J 66 Black and Brass Headlight/parts SOLD
- Replies: 2
- Views: 248
- Mon Feb 12, 2024 11:57 am
- Forum: Classifieds - Parts
- Topic: E and J 66 Black and Brass Headlight/parts SOLD
- Replies: 2
- Views: 248
- Mon Feb 12, 2024 11:56 am
- Forum: Classifieds - Parts
- Topic: E and J 66 Black and Brass Headlight/parts SOLD
- Replies: 2
- Views: 248
E and J 66 Black and Brass Headlight/parts SOLD
Here’s what appears to be an original E&J 66 headlight. It’s been taken apart for restoration. The bucket is pretty rough. The chimney is in pretty good condition. Included is 2 doors need a little work but good condition. Hinge and door clasp. 2 E and J mirror retainers and 2 retaining rings. Might...
- Fri Feb 09, 2024 12:38 am
- Forum: General Discussion Forum
- Topic: You tell me
- Replies: 76
- Views: 6544
Re: You tell me
Great progress Tom! It's coming together. Love the frame mounted carbide generator!
- Thu Feb 08, 2024 9:56 pm
- Forum: General Discussion Forum
- Topic: 1913 Model T Ford Exhaust Pipe
- Replies: 9
- Views: 594
Re: 1913 Model T Ford Exhaust Pipe
Ive ordered drawings from them recently… didn’t seem to have any problems…
- Thu Feb 08, 2024 3:57 pm
- Forum: General Discussion Forum
- Topic: 1913 Model T Ford Exhaust Pipe
- Replies: 9
- Views: 594
Re: 1913 Model T Ford Exhaust Pipe
Looking for information on the original Ford drawings for the 1913 Model T exhaust pipe. According to Bruce McCalley’s book, Model T Ford, The Car That Changed The World , in 1913, “the exhaust manifold was modified during production to use the flanged exhaust pipe, instead of having the pipe fitti...
- Wed Feb 07, 2024 6:44 pm
- Forum: Classifieds - Parts
- Topic: Schrader 724 stems and hardware FS
- Replies: 0
- Views: 267
Schrader 724 stems and hardware FS
I have 4 Schrader 724 stems, bridgewashers, nuts and round rim nuts. The rim nuts are knurled and say Schrader universal valve NY USA. The nuts will accept the regular caps but you have to thread them all the way as opposed to the 777 rim nuts. Nice set. $125 plus shipping mikebird@lifeattheridge.ne...
- Wed Feb 07, 2024 3:11 pm
- Forum: Classifieds - Parts
- Topic: Original style muffler asbestos bands for 09-16 SOLD
- Replies: 1
- Views: 317
Original style muffler asbestos bands for 09-16 SOLD
I have a set of muffler bands that were made by Ward Sherwood back in the day. These were made exactly to the Ford drawing T-1216. The reproduction ones that are available are heavier gauge metal and about 1/2” shorter. Ward only made 20-30 sets. $50 plus shipping mikebird@lifeattheridge.net IMG_151...
- Wed Feb 07, 2024 1:52 pm
- Forum: Classifieds - Parts
- Topic: Late 1911-1912 Rear Axle Housings $1650 Including Free Shipping in the lower 48
- Replies: 7
- Views: 924
Re: Late 1911-1912 Rear Axle Housings $1750 Including Free Shipping in the lower 48
Here’s a picture of the backing plates on my clamshell.
- Tue Feb 06, 2024 2:46 pm
- Forum: General Discussion Forum
- Topic: Ford building lost
- Replies: 25
- Views: 2993
- Tue Feb 06, 2024 10:50 am
- Forum: General Discussion Forum
- Topic: A look into the past
- Replies: 7
- Views: 757
Re: A look into the past
That's awesome Dan!Dan Haynes wrote: ↑Tue Feb 06, 2024 8:36 amI've driven past that building many, many times. The front of it has a shingled mansard-style canopy thing, probably glued on in the 1970s.
- Tue Feb 06, 2024 10:50 am
- Forum: General Discussion Forum
- Topic: A look into the past
- Replies: 7
- Views: 757
Re: A look into the past
Awesome pics Mike. They sure knew how to build a building back then. Look how it stood the test of time as well as the great architecture. Gorgeous building. Today's buildings are lucky to last 50-70 years. I love the old architecture from the early days. There was so much attention to detail and t...
- Mon Feb 05, 2024 10:44 pm
- Forum: General Discussion Forum
- Topic: A look into the past
- Replies: 7
- Views: 757
A look into the past
So one of the photos that I have for reference for my delivery car is this one with some guys standing next to a Ford delivery car with the rear doors open. The name E. Lauer & Sons is visible on the side of the car. If you look closely there is the wording Alturas on the bag that is setting on the ...
- Thu Feb 01, 2024 10:21 pm
- Forum: General Discussion Forum
- Topic: 1913 Model T on Hagerty Auction
- Replies: 37
- Views: 2398
Re: 1913 Model T on Hagerty Auction
Mark that’s awesome! Congrats to you! The big question is do you plan on driving it?
- Thu Feb 01, 2024 9:32 pm
- Forum: General Discussion Forum
- Topic: 1913 Model T on Hagerty Auction
- Replies: 37
- Views: 2398
Re: 1913 Model T on Hagerty Auction
Congrats on whoever won the T! If it was someone here on the forum we hope you will share your thoughts and joys of your newly acquired treasure!
- Thu Feb 01, 2024 8:04 am
- Forum: General Discussion Forum
- Topic: 1913 Model T on Hagerty Auction
- Replies: 37
- Views: 2398
Re: 1913 Model T on Hagerty Auction
Ends today… if you’re on this forum and you win this auction we’d love to hear about your newly acquired T
- Thu Feb 01, 2024 7:35 am
- Forum: General Discussion Forum
- Topic: Varnish Transfer Decals
- Replies: 18
- Views: 1103
Re: Varnish Transfer Decals
Frank, Thanks for that information. Here’s John Regan’s close up followed by Bill Brommer’s Notice that Bill did a font that looks like the ones from the brochures. Also differences in the Ford Script. I had the hardest time finding a hi res Script for printing like the one John used so I basically ...
- Wed Jan 31, 2024 2:02 pm
- Forum: General Discussion Forum
- Topic: Varnish Transfer Decals
- Replies: 18
- Views: 1103
Re: Varnish Transfer Decals
Here's the art work that I have for my decals. I made up 4 different variations. The Delivery car body will be Midnight blue with the french gray pin striping. Which one do you like?
- Wed Jan 31, 2024 12:43 pm
- Forum: General Discussion Forum
- Topic: 1913 Model T on Hagerty Auction
- Replies: 37
- Views: 2398
- Wed Jan 31, 2024 9:24 am
- Forum: General Discussion Forum
- Topic: 1913 Model T on Hagerty Auction
- Replies: 37
- Views: 2398
Re: 1913 Model T on Hagerty Auction
Up to 4,400 now...
- Tue Jan 30, 2024 7:30 pm
- Forum: General Discussion Forum
- Topic: Varnish Transfer Decals
- Replies: 18
- Views: 1103
Re: Varnish Transfer Decals
I have been restoring some old Briggs and Stratton engines this winter and the vinyl decals I have been using,are lousy! They don't stick to a painted metal surface very well around the edges. I can' only imagine how much they would peel on wood or thin sheet metal. Mack, I know what you mean. Most...
- Tue Jan 30, 2024 2:15 pm
- Forum: General Discussion Forum
- Topic: Varnish Transfer Decals
- Replies: 18
- Views: 1103
Re: Varnish Transfer Decals
Jerry that’s perfect! Just what I was looking for.
Thanks!
Thanks!
- Tue Jan 30, 2024 1:26 pm
- Forum: General Discussion Forum
- Topic: Varnish Transfer Decals
- Replies: 18
- Views: 1103
Varnish Transfer Decals
Working on the Ford decals that adorn the sides of my Delivery Car. Wanted to recreate the style and feel of a transfer decal. Most stuff I found online are vinyl stickers. Anyone have any leads or knowledge of doing a decal the right way?
Thanks!
Thanks!
- Fri Jan 26, 2024 11:45 am
- Forum: Classifieds - Parts
- Topic: Wanted Early Forged Running Board Bracket
- Replies: 6
- Views: 438
Re: Wanted Early Forged Running Board Bracket
Still looking. Thanks for the replies so far. Please read the description of the thickness of the bracket that I’m trying to match up. Through the years the brackets became thinner and lighter.
Thanks!
Thanks!
- Thu Jan 25, 2024 7:05 pm
- Forum: General Discussion Forum
- Topic: 1913 Model T on Hagerty Auction
- Replies: 37
- Views: 2398
Re: 1913 Model T on Hagerty Auction
Tim, It's definitely a neat looking specimen! It will be interesting to see what it sells for. A little over 5 years ago I was at the Auburn auction in IN and there was a 1912 and 14 survivor that sold on Thursday for very little $ If I would have known I would have bid... Oh well Here's the thread ...
- Thu Jan 25, 2024 10:58 am
- Forum: Classifieds - Parts
- Topic: Wanted Early Forged Running Board Bracket
- Replies: 6
- Views: 438
Re: Wanted Early Forged Running Board Bracket
Allan,
Yes you are correct. Thanks!
Yes you are correct. Thanks!
- Wed Jan 24, 2024 10:20 pm
- Forum: General Discussion Forum
- Topic: 1913 Model T on Hagerty Auction
- Replies: 37
- Views: 2398
1913 Model T on Hagerty Auction
Just saw this 13 on Hagerty auction site. Looks like a very original survivor. Check out the tires!
https://www.hagerty.com/marketplace/auc ... re6RBYIyEV
https://www.hagerty.com/marketplace/auc ... re6RBYIyEV
- Wed Jan 24, 2024 3:53 pm
- Forum: Classifieds - Parts
- Topic: Wanted Early Forged Running Board Bracket
- Replies: 6
- Views: 438
Re: Wanted Early Forged Running Board Bracket
Frank, here you go:
- Wed Jan 24, 2024 2:28 pm
- Forum: Classifieds - Parts
- Topic: Wanted Early Forged Running Board Bracket
- Replies: 6
- Views: 438
Wanted Early Forged Running Board Bracket
Hey guys I'm looking for 1 early forged running board bracket to match up the other 3 that I have. Here's the specifics: The bolt boss for the running board truss rods is about 0.56 - 0.57" thick The bolt boss for the bolts on the very end for the running boards is about 1/2" thick The long section ...
- Wed Jan 24, 2024 1:47 pm
- Forum: Classifieds - Parts
- Topic: Early Commutator Rod Swivel Joint SOLD
- Replies: 0
- Views: 181
Early Commutator Rod Swivel Joint SOLD
Here’s a swivel joint for the early style commutator Rod
Nice piece. $26 shipped to you in the lower 48 states.
Otherwise $25 plus shipping
mikebird@lifeattheridge.net
Thanks Mike
Nice piece. $26 shipped to you in the lower 48 states.
Otherwise $25 plus shipping
mikebird@lifeattheridge.net
Thanks Mike
- Wed Jan 24, 2024 7:24 am
- Forum: General Discussion Forum
- Topic: Newbie seeking for advice, buying my first model T
- Replies: 50
- Views: 1911
Re: Newbie seeking for advice, buying my first model T
Welcome! Always good to see new people joining a hobby. Learning about the T will be very helpful to you. I suggest that you get in contact with the Tin Lizzie’s club that’s in Oxford FL https://www.tinlizziefl.com/ There are many guys in the clubs that can be very helpful in knowing what to look fo...
- Sun Jan 21, 2024 1:21 pm
- Forum: General Discussion Forum
- Topic: Tire prices-not boding well
- Replies: 11
- Views: 688
Re: Tire prices-not boding well
I bought blemished gray smooth tires. It’s only an appearance issue. Most notably some brown stains. The stains can be cleaned off with orange hand cleaner.
- Sat Jan 20, 2024 5:50 pm
- Forum: Classifieds - Parts
- Topic: 09-13 rear crossmember SOLD
- Replies: 4
- Views: 399
Re: 09-13 rear crossmember
Wayne I sent you an email
Thanks
Thanks
- Sat Jan 20, 2024 2:20 pm
- Forum: General Discussion Forum
- Topic: MTFCA search results not showing in Google
- Replies: 54
- Views: 2601
Re: MTFCA search results not showing in Google
Tim I've used Duck duck Go before, It's a good search engine.
- Sat Jan 20, 2024 10:19 am
- Forum: General Discussion Forum
- Topic: MTFCA search results not showing in Google
- Replies: 54
- Views: 2601
Re: MTFCA search results not showing in Google
Yes. That is so weird. Don't have an answer either. Was easy way to search old forum posts. Even trying to use 'quotes' in the terms didn't work. But just tried search with Yahoo, and got hits on MTFCA FORUM, with search words, so guess I'll have to use another search engine other than Google :o I ...
- Sat Jan 20, 2024 10:17 am
- Forum: General Discussion Forum
- Topic: MTFCA search results not showing in Google
- Replies: 54
- Views: 2601
Re: MTFCA search results not showing in Google
I wonder if one of the website admins would know?
They do such a great job at keeping things running.
They do such a great job at keeping things running.
- Sat Jan 20, 2024 9:57 am
- Forum: General Discussion Forum
- Topic: MTFCA search results not showing in Google
- Replies: 54
- Views: 2601
MTFCA search results not showing in Google
Hey guys, Has anyone else noticed that Google search results are not showing information current and past from the MTFCA site? A couple weeks ago it was not a problem to search for many topics that have been posted over the years through the MTFCA website. I would usually just google the topic and a...
- Fri Jan 19, 2024 7:39 pm
- Forum: Classifieds - Parts
- Topic: Another set of Timken outer roller bearings SOLD
- Replies: 4
- Views: 775
Re: Another set of Timken outer roller bearings FS
Richard $50 for the pair
Thanks
Thanks
- Fri Jan 19, 2024 6:56 pm
- Forum: Classifieds - Parts
- Topic: Another set of Timken outer roller bearings SOLD
- Replies: 4
- Views: 775
- Fri Jan 19, 2024 6:54 pm
- Forum: Classifieds - Parts
- Topic: Front Crossmember with brackets FS
- Replies: 2
- Views: 326
Re: Front Crossmember with brackets FS
To the Top
- Fri Jan 19, 2024 6:53 pm
- Forum: Classifieds - Parts
- Topic: Front Crossmember SOLD
- Replies: 1
- Views: 268
Re: Front Crossmember FS
To the Top
- Fri Jan 19, 2024 6:52 pm
- Forum: Classifieds - Parts
- Topic: 09-13 rear crossmember SOLD
- Replies: 4
- Views: 399
Re: 09-13 rear crossmember
Back to the top
- Wed Jan 17, 2024 6:00 pm
- Forum: General Discussion Forum
- Topic: Early swivel joint for commutator rod?
- Replies: 4
- Views: 456
Early swivel joint for commutator rod?
Going through parts, found this swivel joint.
Doesn’t look like the ones from 1911 and up
Threads right on to a commutator rod.
Doesn’t look like the ones from 1911 and up
Threads right on to a commutator rod.
- Wed Jan 17, 2024 5:51 pm
- Forum: Classifieds - Parts
- Topic: FS CARBURETOR SHUT OFF VALVE (SOLD)
- Replies: 2
- Views: 334
Re: FS CARBURETOR SHUT OFF VALVE
Sent you a text
- Sat Jan 13, 2024 7:57 pm
- Forum: General Discussion Forum
- Topic: What happened to Model T Club of Facebook
- Replies: 10
- Views: 1001
Re: What happened to Model T Club of Facebook
No problems with mine. A NICE 11 was posted for sale just a few hours ago
- Thu Jan 11, 2024 3:57 pm
- Forum: Classifieds - Parts
- Topic: FS early style ft axle assy
- Replies: 5
- Views: 835
Re: FS early style ft axle assy
Second Tim’s advice… also add that the axle has some later parts. Spring is not the tapered early one. Shackles are not the Mae West or figure eight. Check the spindles if they have a DB marking? It would be good to see if the tie rod and the draglink are early. Wishbone is an early one. Spring perc...
- Thu Jan 11, 2024 2:48 pm
- Forum: General Discussion Forum
- Topic: Britten's Brass Works
- Replies: 3
- Views: 616
Re: Britten's Brass Works
Rick takes his time, but he does get his stuff done. It was almost a year before I got my horn and generator back. At his shop he has lots and lots of works in progress. He’s not a one man operation either. His family and I think another guy work there as well. Just give him a ring.
- Thu Jan 11, 2024 10:08 am
- Forum: Classifieds - Parts
- Topic: Wanted 1 Dill TR-16 valve stem
- Replies: 3
- Views: 207
Re: Wanted 1 Dill TR-16 valve stem
Mark sent you a PM
Thanks!
Thanks!
- Thu Jan 11, 2024 9:12 am
- Forum: Classifieds - Parts
- Topic: Wanted 1 Dill TR-16 valve stem
- Replies: 3
- Views: 207
- Wed Jan 10, 2024 6:19 pm
- Forum: Classifieds - Parts
- Topic: SPOKEN FOR Stewart Speedometer Swivel, Gear and Cable
- Replies: 3
- Views: 252
Re: SPOKEN FOR Stewart Speedometer Swivel, Gear and Cable
Been looking for a nice one for quite some time!George House wrote: ↑Wed Jan 10, 2024 6:13 pm….in 4 minutes. Thank you Mike and MTFCA !!
…. shoulda asked $300
- Wed Jan 10, 2024 6:09 pm
- Forum: Classifieds - Parts
- Topic: SPOKEN FOR Stewart Speedometer Swivel, Gear and Cable
- Replies: 3
- Views: 252
Re: FS: Stewart Speedometer Swivel, Gear and Cable
George, I just sent you an email
- Mon Jan 08, 2024 12:23 pm
- Forum: Classifieds - Parts
- Topic: 4 piston rods FS
- Replies: 0
- Views: 293
- Sun Jan 07, 2024 7:22 pm
- Forum: Classifieds - Parts
- Topic: Body moldings
- Replies: 15
- Views: 744
- Sun Jan 07, 2024 5:45 pm
- Forum: Classifieds - Parts
- Topic: Early steering spider and wood wheel SOLD
- Replies: 1
- Views: 233
Early steering spider and wood wheel SOLD
Here’s an early steering spider with the double key way. Not brass but iron. Wood rim is original with one finger joint. Great Wall hanger!
$15 plus shipping
mikebird@lifeattheridge.net
$15 plus shipping
mikebird@lifeattheridge.net
- Sun Jan 07, 2024 5:36 pm
- Forum: Classifieds - Parts
- Topic: Schrader stuff #2 SOLD
- Replies: 1
- Views: 236
Schrader stuff #2 SOLD
Here’s a grab bag of valve stem covers
2 pairs match
4 singles
Different styles of rim nuts
$10 plus shipping for all
mikebird@lifeattheridge.net
2 pairs match
4 singles
Different styles of rim nuts
$10 plus shipping for all
mikebird@lifeattheridge.net
- Sun Jan 07, 2024 5:27 pm
- Forum: Classifieds - Parts
- Topic: Schrader stuff #1 SOLD
- Replies: 0
- Views: 231
Schrader stuff #1 SOLD
:geek: 4 Schrader valve stem covers 1 777 Schrader valve stem 2 early round rim nuts that valve stems screw onto * the valve stem is worn a little on one side but everything still threads just fine. * the rim nuts are original and show wear. Would be good for that original unrestored survivor All fo...