MTFCA Forum

Jeepster47

Would you be able to ship ?

Jeepster47

Sent you a pm, have a new unused set

Jeepster47

Snyder’s has them in stock , P/N. T-7831. $ 1.25

Jeepster47

I know rootlieb makes new wide track fenders but I thought I’d see what’s out there. Have an early (March) 14 touring wide track. My rear fenders are not salvageable so I’d like to find a good original 13-14 set. I’ll order new ones if I have to but would like to see what’s out there before I make m...

Jeepster47

Thank you , my plan is to change over to the late style shift lock. Right now just wanting to get it as safe as possible with what I have .. until I get a late style p158c to swap out with the one I have.

Jeepster47

I am rebuilding a large drum ruckstell. My question is the shift lock is an early brass one. Are the parts internal interchangeable with the second generation cast ones ? My p113 shift clevis shows signs of wear and chips at the two lock notches.

Jeepster47

I am planning on installing a ruckstell in my 24. Will be getting a kit from one of the parts suppliers. The car currently drives well with no rear end noise or issues at all. Whit that being said what should I expect at the least, other parts should I plan on. I know I have to replace the thrust wa...

Jeepster47

If you need measurements I can measure my old set this weekend. I have the old ones from our 14 wide track . They were producing new ones at one time that my dad replaces his because of the keyways being bad at the wheel hub.

Jeepster47

Will do , thanks for the help

Jeepster47

To the top

Jeepster47

Looking for a heat register to match the manifold I have . Or any other parts I am missing. Have the manifold pictured but hoping to pice together a whole set up. Thanks for all the help

Jeepster47

There is a original kit in eBay Iv seen listed recently.

Jeepster47

All the suppliers I have contact are out of the ignition switch assembly (T-5012) with no eta on restocking. Anyone have a good usable one ? Needed for a 24 touring.

Jeepster47

Looking for a good original battery box and lid for my 24 touring.

Jeepster47

Finally found the rattling sound inside my 24. Wasn’t noticeable until I had the oil drained and was hand cranking in prep to check rod clearances. Wonder how long it was loose. Fortunately the threads inside the disc drum are fine. The Cotter pin must have been left out somewhere in its 97 years

Jeepster47

Thanks for the information

Jeepster47

Will be looking for a transmission there , something good enough I can rebuild for a 24

Jeepster47

There is a good one in Franklin next weekend Friday and Saturday at the fairgrounds . Little bit of everything there. Model a and t stuff is always there

Jeepster47

Thanks for the information! My confusion came from watching the install video on the classtique kit and was comparing how my directions for the cartouche kit I am installing. She mentioned in the video to not fasten to the third from the back bow only the other 3 and my kit says to tack the padding ...

Jeepster47

Great ! Thank you . One last question, do you tack the pads to all the bows or just the rear two and front ?

Jeepster47

That’s what I was thinking, greatly appreciate the help!

Jeepster47

I am installing a top on my 24 touring. Has anyone installed a kit from cartouche? Iv watched a few videos and there kit install seems to be different then how clastique installs there kit . Particularly how the wind breaker installs at the windshield. Has anyone installed this kit and have pictures...

Jeepster47

https://www.ebay.com/itm/VINTAGE-BOYCO- ... 890.l49286
Not mine but one Iv been watching

Jeepster47

Thank you !

Jeepster47

Looking for a good original set of mid 20’s style champion x plugs. I hear they are better then the repos. Thanks

Jeepster47

Thanks you !

Jeepster47

Anyone have a drawing or plans for a wheel press. Have loose spokes so time to replace a few. Thanks !

Jeepster47

Great information! Thanks

Jeepster47

Wtb a coil box lid for my 24.

Jeepster47

Looking to find a good coil box lid for my 24. Thanks

Jeepster47

............

Jeepster47

Looking for a original rear view mirror for a open car 1924. Downs need to be perfect . Thanks

Jeepster47

Send pm, might have enough of a set left over from my installation

Jeepster47

I had found that to be true as well. At least that is the set up I have on my rear top iron. Only common sense faster on the rear is the very upper corner one, the other ones are pin and dot type

Jeepster47

Anyone have a 23-25 touring with side curtains? I’m looking to find how they fasten in the middle on my 24 . My common sense fasteners are as fallows. Two in the front along the curve of the top and one upper corner of rear of bow and the three dot studs on the rear bow riser along with the small br...

Jeepster47

I’m looking to buy a set if ac brakes, Lary sidmore I hear is the guy. I tried the email that is listed on here and it seems to be a old one and not working. Does anyone have a good email for him so I can order a set ?

Jeepster47

I’ll take number 1 please. Learmechanic@yahoo.com
Let me know best way to pay you

Jeepster47

Wtb original ac brake linkage or a good copy

Jeepster47

Unfortunately Richard is not making linkage kits at this time. He says hopefully in the near future he will be able to start up again. Is there anyone else making linkage?

Jeepster47

Perfect, thank you

Jeepster47

Thank you !

Jeepster47

Thank you, i don’t like the rockys that Snyder’s have since they don’t work in reverse and disc kits don’t look well on a 100 year old car. I hear these work well . Anyone still making the linkage set up ?

Jeepster47

I’d there anyone still making the ac brakes and linkage kits ?

Jeepster47

Is there anyone still making ac brakes and the linkage kits ?

Jeepster47

Thanks , email sent

Jeepster47

WTB Looking for a decent set of side curtains for a 24 touring . Do not want new. They Do not have to be perfect, I Have a original unrestored car and want a good usable user set.

Search found 46 matches