Does anyone have a John Regan brake switch they don’t need and may want to sell? My switch has gone south ( hogs head mounted style) and the Regan ones are not available at this time. PM me if you have one!
Thanks
Tom
Search found 350 matches
- Mon Mar 25, 2024 1:26 pm
- Forum: General Discussion Forum
- Topic: WTB Regan Brake Switch
- Replies: 1
- Views: 218
- Mon Mar 18, 2024 9:30 pm
- Forum: General Discussion Forum
- Topic: Spark plugs
- Replies: 42
- Views: 2336
Re: Spark plugs
I kind of like new Bosch model 14 mm plugs with adapters. Seem to last for years and hardly ever foul. Bosch 4003 are my favorite! They get down closer to the top of the piston.
- Sun Mar 17, 2024 9:05 pm
- Forum: Classifieds - Parts
- Topic: WTB Texas T VW Distributor
- Replies: 7
- Views: 482
Re: WTB Texas T VW Distributor
On my Texas T dist setup, I buy after market 009 distributors, take out everything under the point plate and run the with the drive simply turning the cam shaft to open and close the points. The grove in the lower distributor body has to be made wider to accomodate the retrained screw Texas T held t...
- Sat Mar 16, 2024 11:05 am
- Forum: General Discussion Forum
- Topic: Power running board mounted step
- Replies: 4
- Views: 540
Re: Power running board mounted step
Been using the box and rope for many years. Thought we'd try something else.
- Fri Mar 15, 2024 9:14 pm
- Forum: General Discussion Forum
- Topic: Power running board mounted step
- Replies: 4
- Views: 540
Power running board mounted step
If anyone would like to have power step mounted on a running board for us that have challenges getting in any model T, send me an email and I will send you photos of two we just put on our cars. Easy install ( 4-hours), built for 12 volt but runs great on 6 volt. Buy from Amazon $211. HOMEON WHEELS ...
- Sun Mar 03, 2024 9:49 pm
- Forum: General Discussion Forum
- Topic: Marietta Ohio swap meet
- Replies: 0
- Views: 196
Marietta Ohio swap meet
Many thanks to all the folks that made the Marietta swap meet a big success! Lots of vendors, lots of buyers and a lot of good items to buy! It seemed as though big items weren’t selling but smaller items were selling well. Mark your calendar for the first Saturday in March 2025! And a fun time was ...
- Fri Feb 23, 2024 7:06 pm
- Forum: General Discussion Forum
- Topic: Marietta Swap meet
- Replies: 0
- Views: 277
Marietta Swap meet
Just 8, eight, ate short days till the Marietta, Ohio swap meet, March 2, 2024. All vendor spaces are sold, the ladies are preparing kitchen getting it ready for coffee and drinks for breakfast at 7:00 am. Then lunch at noon, with pies, chili and coney dogs. Nice heated building. Good selection of n...
- Tue Feb 20, 2024 8:51 pm
- Forum: General Discussion Forum
- Topic: LED Headlights
- Replies: 22
- Views: 1477
Re: LED Headlights
You’re gonna love them!
- Tue Feb 13, 2024 9:16 pm
- Forum: General Discussion Forum
- Topic: 18 days to Marietta
- Replies: 0
- Views: 212
18 days to Marietta
About time to get ready for the Marietta Ohio Swap meet on March 2nd. Weather forecast is sunny and warm! It’ll be warm inside no matter what the weather is outside. This one day meet opens opens at 7:00. The coffee will be hot to go along with fresh made donuts. Come and enjoy a great place to buy ...
- Wed Feb 07, 2024 9:05 pm
- Forum: General Discussion Forum
- Topic: Passing of Bill Portier
- Replies: 3
- Views: 584
Re: Passing of Bill Portier
I saw him do the kick wheel start several times. Jane would be standing on the passenger side and I always thought she might have had a hand in the start process. Another one of his props was the methane Briggs single cylinder he would start with no gas in the tank, spark plug wire disconnected and ...
- Tue Feb 06, 2024 10:08 pm
- Forum: General Discussion Forum
- Topic: Passing of Bill Portier
- Replies: 3
- Views: 584
Passing of Bill Portier
Bill was a great guy and avid model T’er for many years. He had not been active in the club for a few years due to declining health. Bill was always a very entertaining chap, having run Willy’s Used Up Car lot at Flywheelers Park in Florida. His show using a model T as the prop, was always a hoot. H...
- Tue Feb 06, 2024 9:42 pm
- Forum: General Discussion Forum
- Topic: T trailering question
- Replies: 40
- Views: 1798
Re: T trailering question
I always put a front cover over the radiator to prevent air from entering through the engine compartment, that lifts the floor boards and bellows the top. None of that happens if the front opening of the radiator is blocked off! One down side is it is not very aero dynamic!
- Tue Feb 06, 2024 9:33 pm
- Forum: General Discussion Forum
- Topic: Rustoleum farm implement paint for block/head/pan?
- Replies: 11
- Views: 939
Re: Rustoleum farm implement paint for block/head/pan?
Magic farm implement paint from Tractor supply works well!
- Mon Jan 29, 2024 8:41 pm
- Forum: General Discussion Forum
- Topic: 33 days to Marietta Ohio swap meet
- Replies: 1
- Views: 120
Re: 33 days to Marietta Ohio swap meet
Swap meet starts at 7:00 am on Saturday March 2nd, runs til 3:00 pm.
- Mon Jan 29, 2024 8:39 pm
- Forum: General Discussion Forum
- Topic: 33 days to Marietta Ohio swap meet
- Replies: 1
- Views: 120
33 days to Marietta Ohio swap meet
Gather up parts you don’t need, get your buddies together and attend the Marietta, Ohio swap meet on March 2, 2024! Great one day swap meet, with lots of Model T and A parts. Dave’s Restoration drums, Kevin Prus heads, Coil Dr, Ron’s Machine shop,Carb Shed and Lucius Magnetos will all be there. Near...
- Sun Jan 21, 2024 8:17 pm
- Forum: General Discussion Forum
- Topic: Model T’s in single digits
- Replies: 3
- Views: 755
Model T’s in single digits
A group from the NokenT’s of Ohio went on a two day tour this weekend. We left Friday morning with the temp at 25 degrees. We never saw 15 degrees until today. All cars performed flawlessly. Start temp this morning was 8 degrees with snow on the ground. Ignition systems to include coils with standar...
- Tue Jan 16, 2024 8:40 pm
- Forum: General Discussion Forum
- Topic: Swap meets
- Replies: 5
- Views: 743
Re: Swap meets
Very good one day swap meet with lots of T stuff!
- Sun Jan 14, 2024 8:16 pm
- Forum: General Discussion Forum
- Topic: Swap meets
- Replies: 5
- Views: 743
Re: Swap meets
Not in the southeast really, but March 2 has a one day at Marietta, Ohio. And there is always Luray, VA which is really good too, with a tour to boot!
- Sun Jan 14, 2024 8:08 pm
- Forum: General Discussion Forum
- Topic: The Secret to Looking Young!
- Replies: 9
- Views: 796
Re: The Secret to Looking Young!
More often than not, when we are out in a T, we will get more comments and questions from younger girls or ladies than guys. I sometimes wonder if the guys are shy to ask a questions. But if a guy is with a gal when the answer is given, he’s paying attention too! And the gals always want to go for a...
- Tue Jan 02, 2024 8:47 pm
- Forum: Classifieds - Parts
- Topic: FS Bevin Bermuda Bell (SOLD)
- Replies: 7
- Views: 537
Re: FS Bevin Bermuda Bell
In regards to how loud they are, two of ours are steel and one is aluminum. The steel ones are much louder, however, all three have a nice tone! As a side note, our X Govenor of KY, Matt Bevin, owns the company, meaning it’s still in the family for more than a hundred years.
- Tue Jan 02, 2024 8:21 pm
- Forum: Classifieds - Parts
- Topic: FS Bevin Bermuda Bell (SOLD)
- Replies: 7
- Views: 537
Re: FS Bevin Bermuda Bell
I can see how that would be a good item to have. Fortunately I’ve never lost the plunger. I was hoping the hole was gonna be for some fancy do dad!
- Sat Dec 30, 2023 8:56 pm
- Forum: Classifieds - Parts
- Topic: FS Bevin Bermuda Bell (SOLD)
- Replies: 7
- Views: 537
Re: FS Bevin Bermuda Bell
Very nice bell in great condition. I have a couple. The one shown has a hole drilled in the plunger cap. Wonder what that was for? I have never seen the hole before.
Thanks
Thanks
- Thu Dec 28, 2023 4:41 pm
- Forum: General Discussion Forum
- Topic: Distributor and coil, vs. Coil boxes and timer
- Replies: 38
- Views: 1582
Re: Distributor and coil, vs. Coil boxes and timer
Because I did not understand the Ford ignition original to a T, and the folks we started touring with so many years ago tuned their T's by ear, I switched to a distributor. We have had several T's and when there were issues with the Ford ignition, it was a pretty quick fix to go to a distributor. We...
- Tue Dec 26, 2023 6:06 pm
- Forum: General Discussion Forum
- Topic: Marietta Swap meet in 67 days
- Replies: 0
- Views: 168
Marietta Swap meet in 67 days
Just got my registration app for the 14th annual Marietta, Ohio swap meet on March 2, 2024! This one day swap meet is always a good one, with a lot of model T and A parts, new and used. Nice heated building, lunch provided by the ladies of the Country T & A club. Nolting’s Transmission Drums, Coil D...
- Mon Dec 04, 2023 7:22 pm
- Forum: General Discussion Forum
- Topic: Texas T Alternator instructions
- Replies: 7
- Views: 566
Re: Texas T Alternator instructions
I have had this same alternator for about 20 years almost trouble free. If connected straight to the same wire as was used by the generator, after a period of time, say 6 weeks of sitting idle, mine will discharge the battery completely. I have since installed a small 30 amp relay that opens the wir...
- Sat Dec 02, 2023 9:47 pm
- Forum: General Discussion Forum
- Topic: What Have You Done to Your Model T in December
- Replies: 22
- Views: 1910
Re: What Have You Done to Your Model T in December
The only way I can get our 24 touring top up and down is to stand on the back seat floor boards and raise or lower it from there. Make sure all the top bow arm joints move easily. A drop or two of some kind of lube keeps its irons from pitching side to side and binding in the process. Once you do it...
- Sat Dec 02, 2023 9:26 pm
- Forum: General Discussion Forum
- Topic: Texas T Alternator instructions
- Replies: 7
- Views: 566
Re: Texas T Alternator instructions
Thanks much. Never seen or heard of that sight before. I’ll pass the info on and keep a copy as well!
Tom
Tom
- Fri Dec 01, 2023 7:24 pm
- Forum: General Discussion Forum
- Topic: Texas T Alternator instructions
- Replies: 7
- Views: 566
Texas T Alternator instructions
I’m trying to help a long distance newby friend with removing a Delco gear driven Texas T alternator that needs checked out. While for the most parts it works pretty darn good, periodically it has charging issues. Texas T used to have some nice downloads for their stuff, but I can’t seem to find a d...
- Sat Nov 18, 2023 12:42 pm
- Forum: General Discussion Forum
- Topic: negative ground?
- Replies: 30
- Views: 1498
Re: negative ground?
I read once that Ford changed to positive ground on model A's so they could be sold in Europe. European cars weren't allowed to be sold if negative ground.
- Thu Nov 09, 2023 9:08 pm
- Forum: General Discussion Forum
- Topic: '24 Coupe cowl vent spring?
- Replies: 5
- Views: 369
Re: '24 Coupe cowl vent spring?
I have the same vent door on my 25 and it only has one spring. I’m pretty sure, based on other 25’s I’ve seen that it is correct or at least others use the same setup! Works well!
- Fri Oct 27, 2023 9:08 pm
- Forum: General Discussion Forum
- Topic: Scott Conger's Float-Valve
- Replies: 22
- Views: 1978
Re: Scott Conger's Float-Valve
I have one of Scott’s big valves on one of our cars. I was talking to someone about it and how well it worked on hills, etc. This fellow said I don’t want one because I’ll burn more gas. I just really didn’t know how to respond to that comment!
- Thu Oct 26, 2023 8:23 pm
- Forum: General Discussion Forum
- Topic: Gas cap thread
- Replies: 4
- Views: 484
Gas cap thread
What is the gas cap size and thread on an oval 25 gas tank?
Thanks
Thanks
- Fri Oct 13, 2023 7:55 pm
- Forum: General Discussion Forum
- Topic: Inspiration Needed for Brake Light Switch on early T with Rockies
- Replies: 22
- Views: 907
Re: Inspiration Needed for Brake Light Switch on early T with Rockies
Would the fun projects switch work?
- Fri Oct 13, 2023 7:41 pm
- Forum: Classifieds - Parts
- Topic: Ford hanging Authorized Service sign FS Sold
- Replies: 6
- Views: 774
Re: Ford hanging Authorized Service sign FS Sold
Too bad your HOA doesn’t have a sense of humor! I can see not allowing a gas pump. WOW!
- Tue Oct 10, 2023 4:27 pm
- Forum: General Discussion Forum
- Topic: Which Tube Patch Kit(s) work reliably?
- Replies: 9
- Views: 477
Re: Which Tube Patch Kit(s) work reliably?
Some members of our club are having issues with the patches sticking to the tube, applying the patch in the same manner as they have for years. The patch comes off, many times before the tube is installed in the tire. Maybe tube compounds have changed making the adhesive not stick?
- Tue Oct 10, 2023 4:21 pm
- Forum: General Discussion Forum
- Topic: Marietta 2024 Swap meet
- Replies: 0
- Views: 168
Marietta 2024 Swap meet
This years 14th annual Marietta, Ohio swap meet is March 02, 2024. Come join the fun with all the rest of the model T and A vendors and attendees for this one day only swap meet. 100 spaces in a heated, well lighted building, plus outside vendor spaces available, with lunch being served including ho...
- Sat Sep 23, 2023 9:35 pm
- Forum: General Discussion Forum
- Topic: Gaslight Auto parts
- Replies: 10
- Views: 866
Re: Gaslight Auto parts
Gaslight is very active in supporting swap meets. As an example, they will be at the Shepardsville, KY Model A and T swap meet in January 2024. This is a one day meet only, they are there every year with a wide selection of parts. If ordered in advance, they will bring your parts to the swap meet, t...
- Fri Sep 22, 2023 9:16 am
- Forum: General Discussion Forum
- Topic: Gaslight Auto parts
- Replies: 10
- Views: 866
Gaslight Auto parts
Placed an order over the phone for parts at 2:00pm on Wednesday. Verified it was all in stock. Nice to talk to a live, English speaking order taker that clarified a part number. Received the package in less than 24 hours, from OH to KY, regular shipping not expedited. I realize that it's only one st...
- Wed Sep 20, 2023 9:26 pm
- Forum: General Discussion Forum
- Topic: My New Ride
- Replies: 19
- Views: 832
Re: My New Ride
Very nice ride Mr. Williams. Good thing you own a storage facility to have a place to park all these purdy cars. Congrats!
- Tue Sep 12, 2023 9:00 pm
- Forum: General Discussion Forum
- Topic: Cam nut wrench!
- Replies: 40
- Views: 2298
Re: Cam nut wrench!
A couple of buddies want one so that’s two more for me! Total of 4.
- Tue Sep 12, 2023 7:44 pm
- Forum: General Discussion Forum
- Topic: Cam nut wrench!
- Replies: 40
- Views: 2298
Re: Cam nut wrench!
I’d be interested in at least one maybe two!
- Mon Sep 04, 2023 8:42 pm
- Forum: General Discussion Forum
- Topic: Ohio Jamboree
- Replies: 3
- Views: 388
Ohio Jamboree
The 2023 Ohio Jamboree Grove City is in the books. The sponsoring group did an outstanding job keeping us fed, entertained and safe, with stellar instructions throughout the three day tour. Grove City really shined and the Mayor expressed his appreciation for us coming to their city. Ben Nolting did...
- Fri Aug 25, 2023 9:04 pm
- Forum: General Discussion Forum
- Topic: Carburetor leaks fuel when sitting on angle (engine off)
- Replies: 22
- Views: 2462
Re: Carburetor leaks fuel when sitting on angle (engine off)
Like Jerry says, get Scott’s full flow needle/seat and be a happy camper from now on! No more running out of gas on hills with a reasonable amount of gas in the tank!
- Thu Aug 24, 2023 9:01 pm
- Forum: General Discussion Forum
- Topic: 7 Degree Advance Question
- Replies: 10
- Views: 845
Re: 7 Degree Advance Question
Didn’t realize my 280 cam had a 7.5 advance built in. Added a 7.5 advanced gear. With 3 : 1 rear end, the roadster ran like crap on low end but would wind up for ever. Absolutely no low end torque at all. Fun as can be to drive on flat, not at all fun on hills.
- Wed Aug 23, 2023 9:19 pm
- Forum: General Discussion Forum
- Topic: Cylinder Head Flatness
- Replies: 16
- Views: 1041
Re: Cylinder Head Flatness
Do you use copper plus on the gasket when installing it?
- Sat Jul 22, 2023 9:43 pm
- Forum: General Discussion Forum
- Topic: Fuel Problem?
- Replies: 14
- Views: 898
Re: Fuel Problem?
Scott’s float valve works and fixes the above mentioned problem!
- Wed Jul 19, 2023 11:51 am
- Forum: General Discussion Forum
- Topic: Congratulations Patricia Stone (Roy)
- Replies: 7
- Views: 599
Congratulations Patricia Stone (Roy)
Patricia had a Cancer procedure on July 13th. The surgery went very well, described as text book. She was released from the hospital the next day to go home. This morning, at her oncology follow up, there was no trace of cancer in her lymph nodes and next week the Dr will discuss and determine what ...
- Tue Jul 11, 2023 9:58 pm
- Forum: General Discussion Forum
- Topic: All Ohio Model T Jamboree
- Replies: 9
- Views: 1500
Re: All Ohio Model T Jamboree
Looking forward to seeing the Jamboree gang again this year. Not sure how many we have attended, but always have the best time. For anyone who has never attended an Ohio Jamboree, please take the opportunity to do so this year. And what a great value at $50! You won’t be disappointed, no matter what...
- Sun Jun 11, 2023 9:06 pm
- Forum: Classifieds - Parts
- Topic: Flatten hills with a Full Flow Valve for your NH
- Replies: 6
- Views: 915
Re: Flatten hills with a Full Flow Valve for your NH
These work very well and really do well on hills when the gas tank is low of fuel. The removal tool works very well too. I highly recommend both!
- Thu May 25, 2023 9:20 pm
- Forum: General Discussion Forum
- Topic: Seat spring crimping, pliers, not hog ring pliers
- Replies: 7
- Views: 783
Re: Seat spring crimping, pliers, not hog ring pliers
Clastique suggests the same seat compressor as suggested here, but with two lengthwise boards and all thread. Works very well.
- Mon May 22, 2023 7:47 pm
- Forum: Classifieds - Parts
- Topic: NEED BADLY!!
- Replies: 4
- Views: 948
Re: NEED BADLY!!
I really like the Chaffins tour grind. Best all around cam I have used!
- Fri May 12, 2023 8:30 pm
- Forum: General Discussion Forum
- Topic: Rim wind auto clock
- Replies: 2
- Views: 479
Rim wind auto clock
I have had this rim wind auto clock for many years. I’d like to have it checked out , repaired, etc. Does anyone know who might know how to fix the clock?
Thanks
Thanks
- Fri May 12, 2023 5:26 pm
- Forum: General Discussion Forum
- Topic: Ken Nye Last Ride
- Replies: 7
- Views: 1083
Re: Ken Nye Last Ride
Ken and Max Larson toured together last fall with the smokey mountain T club. I have never laughed as hard listening to Ken and Max telling of the days stories and with dinner with them in the evening. Max with his quiet comments and Ken with his over the top comments just about any subject. Ken was...
- Fri May 05, 2023 2:59 pm
- Forum: General Discussion Forum
- Topic: Bermuda Carriage Bells
- Replies: 12
- Views: 1417
Re: Bermuda Carriage Bells
One other question? In your opinion, what is the best location for the plunger for best access? I mounted the first one in front of the seat riser on our 24 touring. While out of the way and not mounted on the floor boards, , it’s hard to reach with the right heal of my foot!
- Fri May 05, 2023 2:52 pm
- Forum: General Discussion Forum
- Topic: Bermuda Carriage Bells
- Replies: 12
- Views: 1417
Re: Bermuda Carriage Bells
This is a plunger type and really sounds great as compared to the AL one. Thanks guys for the responses!
- Fri May 05, 2023 7:59 am
- Forum: General Discussion Forum
- Topic: Bermuda Carriage Bells
- Replies: 12
- Views: 1417
Re: Bermuda Carriage Bells
The one I have in question is a Bevin and is steel. Much louder and heavier than the aluminum one in our 24 touring. Does anyone have any comments, good or bad, about painting the bells?
- Thu May 04, 2023 9:13 pm
- Forum: General Discussion Forum
- Topic: Bermuda Carriage Bells
- Replies: 12
- Views: 1417
Bermuda Carriage Bells
Were different metals used to make Bermuda Carriage Bells or were they all stamped aluminum, meaning the actual outer bell sections? Also, does it hurt the tone quality to paint the outside of those bell sections or do they need to stay paint free!
Thanks
Thanks
- Tue Apr 04, 2023 9:25 pm
- Forum: Classifieds - Parts
- Topic: OT, Shay model A “Pinto” wire wheels for sale
- Replies: 0
- Views: 402
OT, Shay model A “Pinto” wire wheels for sale
I have 6 very good Shay spoke wheels I’d like to get rid of. Mounted on old Sears Allstate tires. $200 for all 6 pick up in Louisville, KY. Pictures on request.
- Sat Apr 01, 2023 9:20 pm
- Forum: General Discussion Forum
- Topic: Starving for fuel, can NOT figure it out!?
- Replies: 28
- Views: 2079
Re: Starving for fuel, can NOT figure it out!?
I had a fuel starvation issue for many years in our 24 touring, but only climbing hills in Ruckstell and low pedal. Put one of Scott’s larger flow float valves in, problem went away. Thanks Scott!
- Wed Mar 08, 2023 9:24 pm
- Forum: General Discussion Forum
- Topic: Which battery horn is this on my 24 T?
- Replies: 23
- Views: 1635
Re: Which battery horn is this on my 24 T?
Assuming the horn is 6 volt, could a ballast resistor be used to step the 12 v to 6 volt for the horn only?
- Mon Mar 06, 2023 8:21 am
- Forum: General Discussion Forum
- Topic: Marietta Swap meet
- Replies: 1
- Views: 434
Marietta Swap meet
Many thanks to the Country Roads T and A Club for putting on another great swap meet this past Saturday. The building was packed with many vendors and also several vendors outside in the parking lot. The quality of items for sale was the best of all of the 12 years we have been attending. And thanks...
- Sat Feb 25, 2023 11:12 am
- Forum: Classifieds - Vehicles
- Topic: 3 T's for sale
- Replies: 13
- Views: 5550
Re: 3 T's for sale
I have been notified by the seller of all the listed model T's and A have found new homes. Thanks to everyone who requested info on these vehicles and thanks to the MTFCA for having this great website!.
It would be fun to find another group of T's like this again sometime.
Tom
It would be fun to find another group of T's like this again sometime.
Tom
- Fri Feb 24, 2023 9:24 pm
- Forum: General Discussion Forum
- Topic: Marietta Swap Meet
- Replies: 1
- Views: 420
Marietta Swap Meet
Just 7 days before the Marietta, Ohio swap meet, Saturday March 4th. Starts at 7:01 am. Looking forward to seeing everyone there. Heated building, 90 vendors, lunch served, one day only, ends at 3:00 pm. And a fun time will be had by all!
- Fri Feb 17, 2023 7:07 am
- Forum: General Discussion Forum
- Topic: Marietta swap meet Sat March 4th
- Replies: 1
- Views: 476
Marietta swap meet Sat March 4th
Just 13 days before the one day only Marietta, Ohio swap meet. Dave Nolting trans drums, Kevin Prus heads, The Coil Dr., Brent Mize, Buckeye Electric, the Lucius Family Mag coils and Ron’s Machine shop will all be there. 90 booths with model T and A parts. Lunch served in a heated building. Meet sta...
- Tue Feb 07, 2023 8:57 pm
- Forum: General Discussion Forum
- Topic: Pitifully Sorry USPS
- Replies: 44
- Views: 3804
Re: Pitifully Sorry USPS
It amazes me how my Amazon orders from 120 miles away, sometimes delivered by USPS, get here overnite, when letters mailed here in the city takes 4 days or more! A recent order from one of the vendors arrived in two days via USPS for half the rate as FedEx and Fedex took 4 days at double what USPS c...
- Wed Feb 01, 2023 8:23 pm
- Forum: Classifieds - Vehicles
- Topic: 3 T's for sale
- Replies: 13
- Views: 5550
Re: 3 T's for sale
2 model T’s remain, the roadster pickup and the commercial truck.
- Tue Jan 31, 2023 8:35 pm
- Forum: Classifieds - Parts
- Topic: WTB Model B Zenith Carburetor and Intake manifold FOUND
- Replies: 5
- Views: 863
Re: WTB Model B Zenith Carburetor and Intake manifold 1932 Ford
There was one listed not long ago by Mark Gember, aka MAG, no carb!
- Mon Jan 30, 2023 7:35 pm
- Forum: General Discussion Forum
- Topic: 6v Alternator vs 12v Alternator
- Replies: 26
- Views: 1996
Re: 6v Alternator vs 12v Alternator
Smith and Jones has the flat style. Fit just fine except the bulb orientation makes the leds vertical and not horizontal. Not sure about the round one. Try super bright led.com. They might have them!
- Mon Jan 30, 2023 7:17 pm
- Forum: Classifieds - Vehicles
- Topic: 3 T's for sale
- Replies: 13
- Views: 5550
Re: 3 T's for sale
It was my fault! Misunderstood the meet place. Glad y’all rescued the roadster. Still can’t believe we walked into a barn with seven model T’s, in pretty good condition after sitting for about three years and they all were for sale! What a fun month this has been! See you in Marietta I hope! Hope to...
- Mon Jan 30, 2023 8:27 am
- Forum: General Discussion Forum
- Topic: 33 days before Marietta
- Replies: 2
- Views: 538
33 days before Marietta
Just a mere 33 days before the Marietta, Ohio swap. Kevin will be there with heads, Brent with coils, BJ with engines and an assortment of old guys with a bunch of Model T and A parts. Heated building, great lunch, runs from 7am to 2pm, come and buy or just hang out with the gang. There's no better ...
- Mon Jan 30, 2023 8:18 am
- Forum: Classifieds - Vehicles
- Topic: 3 T's for sale
- Replies: 13
- Views: 5550
Re: 3 T's for sale
So what is stilke there, the roadster, touring and the depot hack? Can't believe they are still there?
- Sat Jan 28, 2023 7:41 am
- Forum: Classifieds - Vehicles
- Topic: 3 T's for sale
- Replies: 13
- Views: 5550
Re: 3 T's for sale
Do to the overwhelming response to this posting, the owner has requested no more inquiry’s until he sorts through the ones he has. Thanks everyone for your response to this post. I’m sure the roadster and touring car will be gone soon. We may post the huckster again later.
- Fri Jan 27, 2023 12:51 pm
- Forum: Classifieds - Vehicles
- Topic: 3 T's for sale
- Replies: 13
- Views: 5550
3 T's for sale
During a recent outing, we came across a T touring sitting in a barn yard. The older owner has been ill for about three years. A club member bought the barn yard car. The family is selling the remainder of the collection. There are 3 cars left, commercial hack, 26 touring and a 21 roadster pick up w...
- Fri Jan 27, 2023 11:51 am
- Forum: General Discussion Forum
- Topic: Head Gaskets Copper
- Replies: 2
- Views: 672
Head Gaskets Copper
Just got a call from Smith and Jones about T copper head gaskets. They have them in limited stock now. $42 each. Maybe the other dealers have them too and this is old news! I was told the quality is very good. Got 6 coming my way.
- Tue Jan 24, 2023 7:02 am
- Forum: General Discussion Forum
- Topic: Interesting lines in radiator to block pipe
- Replies: 12
- Views: 1249
Re: Interesting lines in radiator to block pipe
My thoughts exactly. But someone sure went to a lot of work for a nice looking installation. The new owner will remove it all once he gets it home !
- Tue Jan 24, 2023 6:25 am
- Forum: General Discussion Forum
- Topic: Interesting lines in radiator to block pipe
- Replies: 12
- Views: 1249
Interesting lines in radiator to block pipe
A recent purchase of a Tudor had these two 3/4" pipes going to a small about 1 1/2 gallon steel tank under the floorboard under the driver seat. No water pump. Anyone ever seen this before and why? Heater, extra capacity for cooling, etc
- Sun Jan 22, 2023 2:24 pm
- Forum: General Discussion Forum
- Topic: OT trailer winch
- Replies: 14
- Views: 1560
Re: OT trailer winch
Don't know how it went from winch to witch . I was gonna blame fat fingers but those two letters ain't no place close to each other! :roll: And thanks for everyone's candid submissions. Gives a guy a bunch to consider. I will not have the winch bolted down always. I will be using a bracket that allo...
- Sun Jan 22, 2023 9:44 am
- Forum: General Discussion Forum
- Topic: OT trailer winch
- Replies: 14
- Views: 1560
Re: OT trailer winch
Just curious, what winch did you buy?
- Sun Jan 22, 2023 7:40 am
- Forum: General Discussion Forum
- Topic: OT trailer winch
- Replies: 14
- Views: 1560
OT trailer winch
I’m looking for a new trailer winch to pull the T onto the trailer. I have had witches with wire cable before. All did well. I was just wondering about witches with rope. The winch will be stored in the dry. Any suggestions of which is recommended is appreciated.
Tom
Tom
- Sun Jan 15, 2023 1:14 pm
- Forum: General Discussion Forum
- Topic: Interesting website
- Replies: 1
- Views: 530
Interesting website
I met John Krug and his wife Diana yesterday at a swap meet in KY yesterday. Nice folks. Check out his website. Pretty interesting! Is now on our bucket list to visit!
modeltnut.com
modeltnut.com
- Sat Jan 14, 2023 6:51 pm
- Forum: General Discussion Forum
- Topic: Out of the mouths of babes
- Replies: 2
- Views: 567
Out of the mouths of babes
Several of us retrieved a very neglected 26 touring car today for one of our younger members at a very attractive purchase price. The young purchaser took it home. Evidently the wife was not impressed and told the young buyer they were not going to keep the car. The son of the buyer, maybe less than...
- Sun Jan 08, 2023 8:38 am
- Forum: General Discussion Forum
- Topic: WACO Timer
- Replies: 40
- Views: 2509
Re: WACO Timer
Waco, Weaver Airplane Co in the 1920’s.
- Sun Jan 08, 2023 8:35 am
- Forum: General Discussion Forum
- Topic: WACO Timer
- Replies: 40
- Views: 2509
Re: WACO Timer
Correction, Waco was in MI and OH, not IN.
- Sun Jan 01, 2023 7:58 pm
- Forum: General Discussion Forum
- Topic: Marietta, Ohio swap meet
- Replies: 0
- Views: 431
Marietta, Ohio swap meet
Looking forward to this years Marietta Ohio swap meet! This one day meet is Saturday March 4 ( always the first Saturday in March), starts at 7:00 am and ends at 3:00 pm. 100 dealers signed up. Heated building with donuts and lunched served. What else you gonna be doing! Where else can you have so m...
- Sat Dec 17, 2022 9:31 pm
- Forum: General Discussion Forum
- Topic: Ohio Jamboree Location
- Replies: 2
- Views: 495
Re: Ohio Jamboree Location
thanks Jerry!
- Sat Dec 17, 2022 5:06 pm
- Forum: General Discussion Forum
- Topic: Ohio Jamboree Location
- Replies: 2
- Views: 495
Ohio Jamboree Location
I know several attendees of the jamborees post on this forum or at least read it. I'm trying to locate a year and location list for every year the Jamboree has been happening. I had a partial list that's somewhere between the house and the shop. It's being very elusive to locate. Does anyone have a ...
- Fri Nov 25, 2022 4:22 pm
- Forum: General Discussion Forum
- Topic: Limited steering in both directions
- Replies: 12
- Views: 1162
Re: Limited steering in both directions
Yes both sides are the same.
- Fri Nov 25, 2022 10:40 am
- Forum: General Discussion Forum
- Topic: Limited steering in both directions
- Replies: 12
- Views: 1162
Limited steering in both directions
I have a 24 Touring car we have had for 15 years. It has always had a steering issue so I have decided to figure out what's causing the issue and a possible remedy. The car drives well, runs straight, no tire wear, but takes a lot of area to turn it around either left or right. It has a 4:1 steering...
- Thu Nov 17, 2022 9:31 pm
- Forum: General Discussion Forum
- Topic: While my T has lost it's head - block and head cleaning
- Replies: 31
- Views: 2507
Re: While my T has lost it's head - block and head cleaning
Can peroxide be used to clean rust from heads and water passages? I guess there could be some fume issues involved! Just curious!
- Thu Nov 17, 2022 9:23 pm
- Forum: General Discussion Forum
- Topic: High Compression Heads and Bore Size
- Replies: 5
- Views: 867
Re: High Compression Heads and Bore Size
The last Z head I used required some relief grinding on the interior edged on all 4 chambers to prevent piston interference on a .030 oversized bore. I tried a Prus head on another engine bored .030 over with no modification needed. Prus advertises .080 with no interference and that seems to be corr...
- Sun Nov 13, 2022 7:19 am
- Forum: General Discussion Forum
- Topic: Marietta Ohio swap meet
- Replies: 0
- Views: 521
Marietta Ohio swap meet
Mark your calendars for the Marietta Ohio swap meet, one day only, March 4, 2023. Location, Washington County Ohio fairgrounds, 922 Front Street. This is the 13th year for this swap meet. Fun starts at 7:00 am, ends at 2:00 pm. Heated building with lunch served. Brent Mize the coil Dr, Dave Nolting ...
- Sat Nov 05, 2022 5:53 am
- Forum: General Discussion Forum
- Topic: I've gone to the dark side...
- Replies: 36
- Views: 3093
Re: I've gone to the dark side...
We bought our first a about 3 years ago. Totally different driving experience and the “family” atmosphere does not seem to be the same as out “T” family for sure. T people drive and enjoy their cars a lot. A lot of “A” people we are meeting rarely drive their cars, which is a shame. T’s are the best...
- Fri Nov 04, 2022 9:04 pm
- Forum: General Discussion Forum
- Topic: What the heck
- Replies: 4
- Views: 874
What the heck
We just completed a five day run in TN with about thirty cars. Had a great time. One of the car owners, in his 80’s, needed some help with a repair. Several of us jumped in and low and behold, I was the guy on my back under the car looking up. Under the driver side splash apron was a clear plastic t...
- Wed Oct 26, 2022 9:38 am
- Forum: General Discussion Forum
- Topic: New LED bulbs for Miss Molly, my 23 Coupe
- Replies: 29
- Views: 2819
Re: New LED bulbs for Miss Molly, my 23 Coupe
There are new not as bright wedge type bulbs out now that have good led power but not the intense bright white. While they are better, they all our in the mid $20 range each. Until such time as these bright ones I have now crap out, the dimmer ones are not not on my radar.
- Tue Oct 25, 2022 11:05 pm
- Forum: General Discussion Forum
- Topic: New LED bulbs for Miss Molly, my 23 Coupe
- Replies: 29
- Views: 2819
Re: New LED bulbs for Miss Molly, my 23 Coupe
The flat style bulbs pictured above work well if the bulb is oriented horizontally. The original socket pin location orients the bulb in a vertical configuration. Modify the socket and the bulbs now cast a beam out in front of the car. Thanks to Bill Robinson, I changed the pin position and those bu...
- Sat Oct 01, 2022 8:31 pm
- Forum: General Discussion Forum
- Topic: Interesting red car at Covered Bridge tour
- Replies: 6
- Views: 1701
Re: Interesting red car at Covered Bridge tour
Car belongs to. Brian Andrews. He did a nice job with it. Been on many tours with him driving this car.
- Fri Sep 30, 2022 9:01 pm
- Forum: General Discussion Forum
- Topic: Bending Bendix washers
- Replies: 7
- Views: 1032
Re: Bending Bendix washers
I always put mine in the gap!
- Mon Sep 26, 2022 9:23 pm
- Forum: General Discussion Forum
- Topic: Change Timing Gear
- Replies: 17
- Views: 1873
Re: Change Timing Gear
I’ve been running nylon cam gears for about 15 years now. Very quiet. No issues even when running an alternator. Some others have had issues.
Tom
Tom
- Fri Sep 23, 2022 8:59 pm
- Forum: General Discussion Forum
- Topic: Zenith Model B carb
- Replies: 6
- Views: 1016
Re: Zenith Model B carb
I have done all the cleaning as before and the carb runs fine with the exception of idle. Coming to a stop, engine dies every time. It was running great and just starting doing this the first of the week. Got to be a piece of crud maybe, but cleaning has not corrected it. I’m going to do a compressi...
- Fri Sep 23, 2022 7:27 am
- Forum: General Discussion Forum
- Topic: Zenith Model B carb
- Replies: 6
- Views: 1016
Zenith Model B carb
Looking for a Zenith model B carburetor rebuilder or someone who has rebuilt B carbs available outright or exchange!
Thanks
Tom
Thanks
Tom