MTFCA Forum

t-time

Anyone know what this engine is?

t-time

sold to richard. thank you.

t-time

NOS Fracto visible lubricator accessory oil level maintainer. With original wood box. Missing a couple line fittings, instructions and wood box lid. $195 includes US shipping.

t-time

casting chaplets used to stabilize the core.

t-time

You might want to consider one of these 123 ignition distributors, they will work 4-15 volts, either rotation and have a programmable advance. https://www.ebay.com/itm/395125653600

t-time

Rotate the distributor until the points just crack open and make sure the rotor is pointing to one of the cap terminals. If someone reversed the rotation of the original dist, the rotor may be pointing in no mans land. The VW distributor is made to turn clockwise, the Texas T drive turn it counter ...

t-time

Looks like a rear view mirror bracket. Late 30's through 40's Ford

t-time

Used to build the Hoover Dam

t-time

Required for cars used south of the equator.

t-time

The 1926 Ford print shows the main journals 5/64-1/8 radius and rod journals 7/64-9/64 radius. The larger the radius the stronger and less chance of cracks developing.

t-time

email sent

t-time

Looking for a machining fixture for T rods, Gene French no longer makes them. South Bend also made a lathe attachment for rods.

t-time

Some new Hassler bolts, they are not heat treated.
Short - https://www.ebay.com/itm/266621337733
Long - https://www.ebay.com/itm/266621338861

t-time

I tried them but they don't have a list showing dimensions.

t-time

Anyone seen a chart or list that shows the dimensions of the available seat springs.

t-time

Looks like a Model A vacuum line through the firewall fitting.

t-time

My 14 with a Ruckstell and Muncie

t-time

price reduction, now $75 each

t-time

3 doors no good wood $100 each pick up only in Placerville Ca

t-time

6 volt version now available. https://www.ebay.com/itm/266502857774

t-time

We will take them, left you a voice mail. Thanks

t-time

email sent

t-time

I'm having 6 volt regulators made for the denso style mini alternators, they are due in the end of November. The alternator kit I make is listed on ebay https://www.ebay.com/itm/256142112941

t-time

First photo demonstrates pre water boarding interrogation know as Ford boarding or T boarding.

t-time

Lever type switch can be mounted anywhere and a wire run to the pedal arm to pull it.

t-time

Cast numbers: MO-160-A, MO-161-A

t-time

Price drop $135 shipped in the US

t-time

Mark I'll take 3, I'll call you tomorrow

t-time

Email sent.

t-time

More wrenches now available. In order to simplify things I will now list them on ebay and future orders will need to be purchased through ebay. The item # is 256208488682 , just put that # in the ebay search to go right to them. Thanks to all.

t-time

New, sealed in package 6 volt positive ground voltage regulator $160 includes US shipping.

t-time

Big turn out and great weather this year for the downtown Placerville car show. We took the 14 speedster and the 29 pickup.

t-time

Sold out again! More ready in about a week. Thanks to everyone

t-time

9 more sets now available.

t-time

emails sent to all inquiry's. One set left then about a 10 days before more are ready. Thanks

t-time

Pair of wrenches to make low band adjustments a snap. 1/8" stainless steel. $18 + $6 for US shipping. Purchase on ebay, item # 256208488682.

t-time

New price $40 + $15 shipping

t-time

sold to Brent.

t-time

Nickel Ford script tail light housing Overall nice with a little discoloring of plating and brass showing through on script. No cracks or dents. $45 + $5 shipping.

t-time

Delco distributor missing the points housing, cap, rotor and lower shaft cap. Has the drive gears. Small chip in the housing where it mounts on the timing cover, can be seen in photo. Centrifugal advance, everything moves. $50 + $15 shipping.

t-time

back to the top

t-time

Master cylinder bracket holds a -66 VW Bug master cylinder for your hydraulic conversion. $35 includes US shipping. 5 available

t-time

Great minds think alike!
6 volt version in the works.

t-time

This is also a no brainer install and does not use head bolts for mounting, plus the alternator is smaller than the delco unit. The only part not in the kit is a longer belt. Just explaining out loud.

t-time

back to the top

t-time

It is, I needed something on my speedster so I came up with this.

t-time

New 12 volt alternator kit for 09-27 for model T. Simple bolt on installation, no modifications to engine required. Mounts on the left water outlet neck bolt using a special included bolt, tension bracket uses two of the block to pan bolts. 12 volt, 30 amp, negative ground mini Denso style alternato...

t-time

I have, I've seen worse. I'll start with evaporust and see what it will do. Thanks again.

t-time

A case has been located. thanks to everyone who responded.

t-time

This one has patent pending in the casting. Thank you

t-time

Going through a Chicago transmission and discovered the case has been welded. I would rather not use it so I'm looking for another.

t-time

Sold, thanks David

t-time

Sold - thanks Layden.

t-time

4 screw brass top coil, buzzes but needs the condenser replaced. $25 + $15 shipping.

t-time

Hinge top dog bone cap. Internal threads, one top cap hinge ear broken (see photo) $75 includes US shipping.

t-time

Rex Machine Co. locking steering steering box cover, missing key and lock internal parts. $45 includes US shipping.

t-time

Bosch Magneto kill switches, no keys. $40 each includes US shipping.

t-time

Nice Ford-O tail light $115 includes US shipping.

t-time

Cast iron front plate alignment tool $40 + $10 shipping.

t-time

email sent

t-time

Either works fine. Email me through this site for info. Thanks

t-time

One front Dayton wire wheel hub, pins will need to be replaced. $150 includes US shipping.

t-time

Ever seen the Lucas vacuum cleaner? ................It's the only thing they made that didn't suck!

t-time

Many factory drawings are available through the Henry Ford Museum. There is a request form on their website.

t-time

New wheels and other parts
https://gokartguru.com/model-t-go-kart-parts-store/

t-time

Carburetor spoken for. Thanks David

t-time

Paypal works, send me an email through the forum. Thanks

t-time

weights sold. thanks Rich.

t-time

Large Miller Master # CJ2163, 1-5/8 throat opening, two pair of mounting holes 1 pair 2-3/8 C/C, 2 pair 3-1/4 C/C. Very good condition all parts move freely. $250 + $17 US shipping.

t-time

Pair of used Dunn counterweights $95 + $17 US shipping

t-time

maybe for these wheels

https://sacramento.craigslist.org/gms/d ... 88174.html

t-time

Not familiar with this emblem. Anyone know what car it is from? Thanks.

t-time

They are commonly used on John Deere 2 cylinder tractors.

t-time

Sold to Charlie, thanks.

t-time

back to the top

t-time

Pair of 12 rivet axle tubes. $200 local pick up in Placerville or I can arrange free ride to Orange Ca.

t-time

Allen I sent you an email on the 15th just checking if you got it. Thanks

t-time

email sent

t-time

Looking for a Texas T accessory pre '25 gas pedal assembly.

t-time

NOS Do-Ray #1241 tail lamp. Single filament. $55 includes US shipping.

t-time

Petrah Phyre wrote: ↑
Fri Aug 19, 2022 3:57 pm
So when do you start production?

The second Thursday of next week!

t-time

Ed Fuller wrote: ↑
Fri Aug 19, 2022 6:39 pm
Beautiful work!

Did you also make the T-handle and lever for the light switch?

T handle is a drawer pull and the lever is part of an old cabinet door latch

t-time

Just finished the instrument panel for current speedster project. Cast face plate. Modified Dodge speedo, lever on right is the light switch, T handle on left is a pull-to-start.

t-time

Found - Thanks Don

t-time

Cast iron, counter weighted, marked usa

t-time

email sent

t-time

Anyone have a Dubats crank they are willing to part with?

t-time

Thanks for the info.

t-time

My speedster ignition key has gone MIA, similar to a ford switch but different key profile. Seeing if anyone has any possibilities to avoid tearing the whole thing apart.

t-time

I'll take them. email sent

t-time

Thanks for the help.

t-time

Looking to ID this steering box.

t-time

price drop: now $130

t-time

price drop: now $160

t-time

carb is sold - thanks Ted

t-time

Simmons super power carb, crusty but everything moves, flap valve there but is very loose, heater element is missing. $75 includes US shipping - paypal F/F

t-time

Super cool Lunkenheimer flow sight glass. 1/4" ID inlet/outlet lines, 3-1/2" tall x 1-3/4 wide x 2" deep (not including feed lines). $150 including US shipping - paypal F/F

t-time

Bosch S12 magneto switch. Nickel plated face with some brass showing through, long key for short armed drivers. $180 includes US shipping, paypal F/F

t-time

interested in selling the brass steering brace?

t-time

Hi Mark, I left you a voice mail earlier, I'll take these and a set of the push rod cups. I'll call you tomorrow. Thanks, Mark.

Search found 114 matches