Search found 128 matches

by dunoon
Thu May 12, 2022 10:15 pm
Forum: General Discussion Forum
Topic: Luray Swap Meet
Replies: 2
Views: 868

Luray Swap Meet

Is everyone still planning to attend Luray, the weather is going to be questionable. I hope there is a good crowd of vendors.
by dunoon
Sun May 01, 2022 9:42 am
Forum: General Discussion Forum
Topic: Luray Swap Meet
Replies: 36
Views: 4774

Luray Swap Meet

Does anyone know if they are going to have an area where you can bring stuff and put a price on it and they will sell it for ya? Planning on being there on Fri. Thanks
by dunoon
Mon Mar 07, 2022 6:07 pm
Forum: General Discussion Forum
Topic: License Plate
Replies: 10
Views: 1938

License Plate

I just acquired a 1926 Va plate in good condition, just surface rust. I want to get it restored. Does anyone know who can restore plates? Thanks
by dunoon
Tue Feb 08, 2022 10:16 am
Forum: General Discussion Forum
Topic: Drum Dia
Replies: 17
Views: 2015

Drum Dia

Does anyone know the dia of transmission drums for a 26. I'm thinking for using a local machine shop to turn a small piece of pipe to make a gage to shape my bands. Thanks
by dunoon
Mon Feb 07, 2022 5:35 pm
Forum: General Discussion Forum
Topic: Needing a Junk Transmission Drum
Replies: 3
Views: 974

Needing a Junk Transmission Drum

I need a trans drum to use for checking roundness of bands anything will do as long as the drum surface is OK. Tried to find one here where I live but, no luck, let me know what ya have, width doesn't matter. Thanks
by dunoon
Thu Jan 20, 2022 1:11 pm
Forum: General Discussion Forum
Topic: Quick Change Bands
Replies: 16
Views: 2318

Quick Change Bands

I just removed my bands to have them relined, I was wondering why the removable ear should be on the drivers side. It seems that if it rolled out on the other side there isn't any interference removing the bands while on the driver side you have the pedals and other items you have to work around. An...
by dunoon
Sat Dec 18, 2021 1:00 pm
Forum: General Discussion Forum
Topic: Kevlar Transmission Bands
Replies: 10
Views: 2189

Kevlar Transmission Bands

I'm looking to replacing my transmission bands on my 26 coupe. I 'm wanting to use kevlar. Does anyone know a vendor that sell kevlar and will install them on my bands? Thanks
by dunoon
Sun Nov 14, 2021 10:08 am
Forum: General Discussion Forum
Topic: Battery Running Down
Replies: 11
Views: 1912

Battery Running Down

I have a 26 coupe that has been restored. Lately if I don't run it for a week or so, I go to start it and the battery will nearly be flat. The battery is relatively new 1.5 yrs old, I was having problems with the cutout sticking so I changed it to a diode one. Yesterday after a 3 mile run, I tried t...
by dunoon
Fri Oct 01, 2021 2:46 pm
Forum: General Discussion Forum
Topic: Dash light
Replies: 0
Views: 586

Dash light

Does anyone know where to buy a dash light with the mounting hole spring at 1 1/2" All the repros. are about 1 1/4" Thanks
by dunoon
Tue Sep 28, 2021 9:19 pm
Forum: General Discussion Forum
Topic: Saving the Upholstery
Replies: 1
Views: 652

Saving the Upholstery

Does anybody else have difficulty getting in and out of their car. I have a 26 coupe and it's hard to get in or out without dragging my foot on the bottom front corner of the door. If afraid I'm going to wear the upholstery. I move the parking brake lever forward whenever I get in or out. The distan...
by dunoon
Thu Sep 02, 2021 1:20 pm
Forum: General Discussion Forum
Topic: Some questions about a replacement radiator
Replies: 32
Views: 3679

Re: Some questions about a replacement radiator

I've have had steam coming out the overflow tube sometimes and sometimes just gurgling. I checked on google the boiling point at 1500 ft alt.the formula said 109.8.
by dunoon
Wed Sep 01, 2021 9:42 pm
Forum: General Discussion Forum
Topic: Some questions about a replacement radiator
Replies: 32
Views: 3679

Re: Some questions about a replacement radiator

Well, I received my new aluminum radiator today but, before I even open the box, I'm going to take off the head tomorrow and check the block for scale, the head was boiled out and checked for flatness 2 years ago along with having the radiator rodded out, the radiator shop said it was pretty clean. ...
by dunoon
Tue Aug 31, 2021 8:59 am
Forum: General Discussion Forum
Topic: Some questions about a replacement radiator
Replies: 32
Views: 3679

Re: Some questions about a replacement radiator

Some have mentioned that I may have placed the head gasket on wrong, what is the correct way
by dunoon
Sun Aug 29, 2021 8:21 pm
Forum: General Discussion Forum
Topic: Some questions about a replacement radiator
Replies: 32
Views: 3679

Re: Some questions about a replacement radiator

When I stop and shut it down you can hear the water boiling. I bought this 26 coupe in 1962 when I was 15, I drove it constantly till 1965. I don't ever remember it overheating, except when I was in a parade. I don't think adding a water pump would make much of a difference. This car is not intended...
by dunoon
Sun Aug 29, 2021 6:10 pm
Forum: General Discussion Forum
Topic: Some questions about a replacement radiator
Replies: 32
Views: 3679

Re: Some questions about a replacement radiator

Prior to checking out a new radiator, I cleaned and flushed the engine, had the radiator rodded out, used distilled water with Water Wetter, It was better but still over heats. Checked timing and mixture.
by dunoon
Sun Aug 29, 2021 3:53 pm
Forum: General Discussion Forum
Topic: Some questions about a replacement radiator
Replies: 32
Views: 3679

Some questions about a replacement radiator

I've tried them all and it looks like I'm going to have to replace my radiator. A fellow that was visiting the area in his 14 T said he has replaced a lot of T radiators with aluminum radiators from speed shop suppliers. He it's just a matter of taking it to a aluminum weld shop and have them change...
by dunoon
Mon Aug 23, 2021 12:26 pm
Forum: General Discussion Forum
Topic: Can one use a 12v to jump a 6v started?
Replies: 13
Views: 2318

Re: Can one use a 12v to jump a 6v started?

Thanks for all the replys, went out this morning after on the charger all night, it started right up.
by dunoon
Mon Aug 23, 2021 9:20 am
Forum: General Discussion Forum
Topic: Can one use a 12v to jump a 6v started?
Replies: 13
Views: 2318

Re: Can one use a 12v to jump a 6v started?

I haven't been out to check if the battery is up enough but, this is a temporary fix. Not planning to use it often.
by dunoon
Sun Aug 22, 2021 9:41 pm
Forum: General Discussion Forum
Topic: Can one use a 12v to jump a 6v started?
Replies: 13
Views: 2318

Can one use a 12v to jump a 6v started?

I was doing a lot of starts and stops lately. So the battery is to low to start it. I'm charging the battery right now but, if some reason it won't crank can I use a 12v jump to just the starter?Thanks
by dunoon
Sat Jul 24, 2021 5:53 pm
Forum: General Discussion Forum
Topic: coolant Ratio
Replies: 3
Views: 1045

coolant Ratio

Being that water is a more efficient coolant than antifreeze, I was thinking of using more water than the normal 50/50 ratio maybe 75/25, does any know the freeze protection at that ratio. I live in the mtns of Va and winters normally don't get much below 10 deg above zero. Thanks
by dunoon
Tue Jul 20, 2021 10:54 am
Forum: General Discussion Forum
Topic: Cooling Cap.
Replies: 2
Views: 739

Cooling Cap.

What is the cooling capacity for a 26 T? Thanks
by dunoon
Sun Jul 18, 2021 1:26 pm
Forum: General Discussion Forum
Topic: 26 Coupe Overheating
Replies: 13
Views: 2250

Re: 26 Coupe Overheating

It ain't the fan, I got the car boiling and the fan was free. So I guess I'll try flushing the engine and the radiator. I was at an auto show yesterday and a guy with a 16 T suggested trying Water-Wetter has any one used it? Also what flush do youse use, was thinking of using something, instead of j...
by dunoon
Wed Jul 14, 2021 1:31 pm
Forum: General Discussion Forum
Topic: 26 Coupe Overheating
Replies: 13
Views: 2250

Re: 26 Coupe Overheating

I'm beginning to wonder if it might bee the fan, maybe when it gets hot the fan starts to seize, when the belt came off the fan belt was pretty tight and this time it was a lot looser. I'm going to run it with the hood off so I can see the fan while I'm driving and see if the fan stops when it overh...
by dunoon
Tue Jul 13, 2021 9:07 pm
Forum: General Discussion Forum
Topic: 26 Coupe Overheating
Replies: 13
Views: 2250

26 Coupe Overheating

I took my coupe out this afternoon for a spin. haven't driven it much since it was finished late last fall just a couple miles from home. It overheated once a few weeks ago found the fan belt had came off. Today took her for a longer spin about 6 miles everything was fine temp was good till about a ...
by dunoon
Thu Mar 04, 2021 8:34 pm
Forum: General Discussion Forum
Topic: Mid-Atlantic Prewar Swap Meet "Luray" May 14 & 15, 2021
Replies: 12
Views: 2320

Re: Mid-Atlantic Prewar Swap Meet "Luray" May 14 & 15, 2021

I attended about 4 times always enjoy myself, though I really enjoyed the meet last fall
by dunoon
Thu Mar 04, 2021 12:05 pm
Forum: General Discussion Forum
Topic: Fun Project Voltage Regulator?
Replies: 26
Views: 4204

Re: Fun Project Voltage Regulator?

I got on the site to ask the same question, and somebody beat me to it. I've checked most vendors and nobody has any regulators. Looks like it might be a long wait.
by dunoon
Wed Feb 24, 2021 2:58 pm
Forum: General Discussion Forum
Topic: Generator Outputs
Replies: 8
Views: 2351

Re: Generator Outputs

When I was checking the generator on the bench I didn't have a battery hooked up, will that make a difference in my readings?
by dunoon
Tue Feb 23, 2021 10:47 pm
Forum: General Discussion Forum
Topic: Generator Outputs
Replies: 8
Views: 2351

Generator Outputs

I finished rebuilding my generator and was bench testing it this afternoon. At about 1k RPM I was getting 14.75 volts and about .9 amps, what's did I do wrong. I rebuilt it using the generator rebuilt video on Utube and the Ford Service manual. Any suggestions would be appreciated
by dunoon
Sun Feb 21, 2021 1:04 pm
Forum: General Discussion Forum
Topic: Flushing?
Replies: 11
Views: 2109

Flushing?

I will change oil in my rebuilt 26 engine, in the spring, does anybody flush their engine, if so what with? I put a dam in the crankcase just aft of the rod dip pan and will loosen it to drain all the oil out.
by dunoon
Wed Jan 27, 2021 5:05 pm
Forum: General Discussion Forum
Topic: Rebuilding Generator
Replies: 2
Views: 830

Rebuilding Generator

I'm in the process of rebuilding my generator. When I checked to see if everything was OK. I found 8 ohm when I checked with my VOM between the Insoulated brush holder and the frame of the brush holder. I was expecting it be infinity. So is 8 ohms to high?
by dunoon
Mon Jan 11, 2021 9:26 am
Forum: General Discussion Forum
Topic: Generator Rivets
Replies: 6
Views: 1580

Generator Rivets

The brass flat rivets that hold the insulators to the brush plate holder, where would I find them, I've checked most vendors and they don't list them.
by dunoon
Mon Dec 14, 2020 11:11 am
Forum: General Discussion Forum
Topic: Cutout or Voltage Regulator
Replies: 8
Views: 1770

Cutout or Voltage Regulator

I'm in the process of rebuilding my generator, I was thinking of replacing the cutout with a voltage regulator that is sold by Langs. Does anybody have any experience with this regulator or any other recommendations. Thanks
by dunoon
Mon Nov 30, 2020 8:50 pm
Forum: General Discussion Forum
Topic: 1926 Coupe Upholstery
Replies: 32
Views: 4539

Re: 1926 Coupe Upholstery

I had a classique upholstery kit installed in my 26 coupe, t looks great, my installer ( who does upholstery jobs on a lot of very expensive show cars) had it call classique a couple times to have them explain some details.
by dunoon
Thu Oct 08, 2020 5:18 pm
Forum: General Discussion Forum
Topic: What did you find at Luray???
Replies: 9
Views: 3263

Re: What did you find at Luray???

Sorry no photos, I was looking for a lug/spark plug wrench got 1 for $1 and a Model T screw jack paid $20. My best del was none auto related it was a turbo-torch with regulator, hose, torch and 2 tips for $5.00. Bought a spare coil and a new repo outside mirror for a T. Met and talked to some great ...
by dunoon
Mon Oct 05, 2020 7:41 am
Forum: General Discussion Forum
Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
Replies: 71
Views: 11128

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

Are youse setting up a trailer to take peoples stuff already priced and youse sell it for a price?
by dunoon
Sun Oct 04, 2020 8:11 am
Forum: General Discussion Forum
Topic: Flying Model T
Replies: 23
Views: 4274

Re: Flying Model T

I bought my T when I was 15 in 1962, I drove all thru high school except after dark as my folks wouldn't let me. After all these years I've finally got back on the road with a hiatus of over 50 years. Looking forward to drives in it while I'm still able.
by dunoon
Sun Oct 04, 2020 8:01 am
Forum: General Discussion Forum
Topic: Luray reports
Replies: 10
Views: 2892

Re: Luray reports

Dan, Are youse going to have that trailer where we can leave stuff with a price and youse sell it for us?
by dunoon
Wed Sep 09, 2020 7:51 pm
Forum: General Discussion Forum
Topic: Anybody From Va, Licenceing Question
Replies: 5
Views: 1706

Anybody From Va, Licenceing Question

After over 50 years I've finally got around to getting a new title and plates. I got the plates yesterday. My question does Va require me to use 2 plates? All the antique cars I've seen only had 1 plate, or did miss something. I'd tried to look it up but couldn't find any info. Thanks
by dunoon
Thu Sep 03, 2020 6:00 pm
Forum: General Discussion Forum
Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
Replies: 71
Views: 11128

Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?

I can only attend 1 day, which day do you expect to be the best. Just wondering If many vendors will be coming the 7th or the 8th. Any suggestions.
by dunoon
Wed Jul 22, 2020 9:02 pm
Forum: General Discussion Forum
Topic: Identify this Transmission? 1918 Cyclecar
Replies: 18
Views: 5375

Re: Identify this Transmission? 1918 Cyclecar

Back in the 30's my dad had a Heath Parasol Airplane. The original 2 cylinder french engine threw a rod over Iowa somewhere. He hobo on trains to get back to NW Indiana and headed back to Iowa with mt mom's model A. Took off the wings put the tail skid on the bumper and headed back to Indiana. He us...
by dunoon
Wed Jun 10, 2020 10:07 pm
Forum: General Discussion Forum
Topic: Howells Sheet Metal delays
Replies: 26
Views: 7308

Re: Howells Sheet Metal delays

I bought all my sheetmetal from Howell's and never had the slightest problem. They were very acccomidating. Rally sorry to hear some folks are having a hards time.
by dunoon
Wed Jun 10, 2020 7:20 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

Hooray, Hooray, My car running great. Just back to normal. Neighbor stopped by any is pretty sharp, I asked him listen to me trying start it. While I was in the car trying start it, he held his hand over the air intake and didn't feel any vacuum. He realized that the choke was closed though in the c...
by dunoon
Tue Jun 09, 2020 9:33 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

Steve Hughes wrote: ↑
Tue Jun 09, 2020 9:12 pm
You say you have a vaporizer carburetor. It could be that the central plate has rusted through. That could explain why it ran fine and then it didn’t. Worth checking out.
Brand new plate
by dunoon
Mon Jun 08, 2020 10:43 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

perry kete wrote: ↑
Mon Jun 08, 2020 9:16 am
If the only thing you changed is the sediment bowl then you may have bent or altered the float in the bowl. That would change your fuel flow
But it ran great. after I first started it without touching the carb.
by dunoon
Mon Jun 08, 2020 10:41 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

Well I got the kick back problem solved, crossed wires. But the original problem is still there, it'll put, put (fire) a couple times then the starter will spin freely, and when I push the starter button it'll do it again. The throttle setting doesn't seem to make difference. It did run a couple min...
by dunoon
Mon Jun 08, 2020 9:13 am
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

The only thing I did to it was put on a new sediment bowl. That's what got me baffled.
by dunoon
Sun Jun 07, 2020 3:47 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

If it kicks back it is most likely an ignition timing issue. Something is wrong with the timer or roller, or a bunch of backlash in the advance mechanism and/or an incorrect initial setting. Popping thru the carburetor would indicate the fuel mixture is too lean, but the popping would not cause the...
by dunoon
Sun Jun 07, 2020 3:42 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

I have a Tiger/Ford timer, It's impossible to have it installed wrong. Thanks for the reply
by dunoon
Sun Jun 07, 2020 10:10 am
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

I'm considering removing the radiator so I can get a very good access to the times and go from there, instead of squeezing between the engine and the radiator. The brass shield sounds like something to check too.
by dunoon
Sat Jun 06, 2020 8:36 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

This afternoon I removed the generator and checked the camshaft timing gear, its iron. Then I had neighbor slowly crank it while I checked the condition of the teeth, everything is fine. I'm wondering if the cam could turned relative to the gear. How is the cam and gear held together? Is it a key , ...
by dunoon
Thu Jun 04, 2020 9:26 am
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

Re: I'm So Frustrated

I'm sure it's a metal timing gear but I'll check this after noon, Also the gas flow is great.
by dunoon
Wed Jun 03, 2020 9:53 pm
Forum: General Discussion Forum
Topic: I'm So Frustrated
Replies: 28
Views: 8001

I'm So Frustrated

I've been restoring for the last 2.5 years my 26 coupe that I bought as a kid in 1962. It's nearly finished just adding LED brake lights. It's been running very well, have driven it up and down the road and been starting if for folks when they come over to see it. About 3 weeks ago I started it as u...
by dunoon
Sun May 31, 2020 9:58 am
Forum: General Discussion Forum
Topic: Recommendations for rebuilding coils
Replies: 18
Views: 5900

Recommendations for rebuilding coils

I'm wanting to have my coils rebuilt I've contacted both Mize/Lawson. Have anyone had any experience with these guys? Looking for recommendations. Thanks
by dunoon
Tue May 26, 2020 1:32 pm
Forum: General Discussion Forum
Topic: Halogen Tail Lites
Replies: 6
Views: 2482

Halogen Tail Lites

Has anyone had experience putting halogen bulbs in tail lights? I was wondering if the 50/5 halogen bulb would get to hot for the cardboard disc in a 26 tail/brake light? Thanks
by dunoon
Tue May 19, 2020 7:37 pm
Forum: General Discussion Forum
Topic: Electric Headlight breakdown
Replies: 2
Views: 1451

Re: Electric Headlight breakdown

Thanks for the info, helps loads
by dunoon
Tue May 19, 2020 6:09 pm
Forum: General Discussion Forum
Topic: Electric Headlight breakdown
Replies: 2
Views: 1451

Electric Headlight breakdown

I'm looking for an illustration of how the headlight on a 26 is assembled. Mac's catalog used to have numerous illustrations for different assembly's, my latest catalog doesn't have many. So, I'm looking to find out what fits where in the headlight. Thanks
by dunoon
Wed Apr 15, 2020 8:05 pm
Forum: General Discussion Forum
Topic: Adj. Trans Bands
Replies: 2
Views: 1574

Adj. Trans Bands

I have a 26 coupe and want to adj the bands. A while ago 4-6 months a fellow told how measure the band adj by using the cams on the outside of the hogshead. Does anyone remember that thread? If so could you please let me know where to find it. Thanks
by dunoon
Sat Apr 11, 2020 2:16 pm
Forum: General Discussion Forum
Topic: Front wheel bearing
Replies: 3
Views: 1998

Re: Front wheel bearing

got it off using a Dremel made a slit in it and hit with cold chisel. Itmust have spun the spindle is kinda hauled up but, with pastence and a smooth flat file I'll get it. Thanks for the suggestions.
by dunoon
Fri Apr 10, 2020 3:38 pm
Forum: General Discussion Forum
Topic: Front wheel bearing
Replies: 3
Views: 1998

Front wheel bearing

Not a Model T question but don't know who else to ask though it is a Ford. I have a 97 Ford Ranger 4WD. The inside front wheel bearing self-distracted and the inner race is ceased to the spindle. I can't get it off. I was thinking heat but, concerned that it might damage the spindle or I was thinkin...
by dunoon
Tue Mar 31, 2020 4:15 pm
Forum: Classifieds - Parts
Topic: brand new stainless Macs bumper kits for 26/27
Replies: 6
Views: 3633

Re: brand new stainless Macs bumper kits for 26/27

Is the rear,? one or split
by dunoon
Mon Mar 09, 2020 9:08 am
Forum: General Discussion Forum
Topic: Rivet or Bolt
Replies: 9
Views: 4293

Rivet or Bolt

I had to remove the RT front fender bracket as it was bent. After straightening I was wondering if I could reattach with bolts instead of rivets. It would make the job a lot simpler. Thanks
by dunoon
Sun Mar 08, 2020 10:03 am
Forum: General Discussion Forum
Topic: WHat Have You Done To Your Model T In March?
Replies: 98
Views: 26250

Re: WHat Have You Done To Your Model T In March?

Still working on getting the fenders, splash shields and running boards on nothing lines up with out a lot of grunting and some drilling.
by dunoon
Fri Feb 28, 2020 3:58 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in February?
Replies: 76
Views: 22747

Re: What have you done to your Model T in February?

Trying to put the car back together again. My body and all the fenders, running boards act have been restored and painted disassembled. I'm having a devil o a time getting everything to align enough to get it back together. Yesterday I got the rear fender on and tried to get the running board on cou...
by dunoon
Fri Feb 21, 2020 2:26 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in February?
Replies: 76
Views: 22747

Re: What have you done to your Model T in February?

Got it back from the shop getting new interior, upholstery, roof and visor. A fantastic job.
by dunoon
Mon Jan 27, 2020 7:36 pm
Forum: General Discussion Forum
Topic: First drive is in a T
Replies: 13
Views: 5198

Re: First drive is in a T

I took my driver test in 1962 in my 1926 Model T which I still have. The tester was really surprised
by dunoon
Fri Jan 24, 2020 8:59 pm
Forum: General Discussion Forum
Topic: Tail light Thoughts
Replies: 12
Views: 5012

Tail light Thoughts

I'm planning on putting on my 26 coupe a right tail light with double bulbs so I can have a brake and tail light.I was thinking down the line adding turn signals by just wiring it like a modern car where the turn signal is just intermittent brake light. I'm sure I'm not the first to think of it but,...
by dunoon
Fri Jan 24, 2020 2:15 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in January?
Replies: 62
Views: 17216

Re: What have you done to your Model T in January?

My car a 26 coupe is still at the upholstery shop getting a complete interior and top.
by dunoon
Mon Dec 16, 2019 3:15 pm
Forum: General Discussion Forum
Topic: Just Wondering
Replies: 3
Views: 1950

Just Wondering

I've been messing around with Model T's off and on for over 50 years. I never got asked these questions till the other day, maybe somebody knows the answer. What does a stock 1926 coupe weigh? And with a standard rearend, what is the engine RPM at normal crusing speed 25-35 MPH. Thanks
by dunoon
Mon Dec 16, 2019 3:09 pm
Forum: General Discussion Forum
Topic: What have you done to your Model T in December?
Replies: 56
Views: 15579

Re: What have you done to your Model T in December?

I have been working on my 26 coupe for a couple years, the mechanics are finished the body has been completely restored with a partial replaced sub=frame and quite a few patch panels. Repainted so the body is completely finished. Last week the fellow that is installing my interior and upholstery cal...
by dunoon
Thu Nov 28, 2019 10:08 am
Forum: General Discussion Forum
Topic: Tail Lite Wiring
Replies: 4
Views: 2346

Tail Lite Wiring

I'm going to be adding an additional wire to my tail-lights on my 26 coupe for the brake light. Does anyone know of a loom or sleeve that I could use for these wires or should I just wrap them with friction tape. Thanks
by dunoon
Tue Oct 29, 2019 1:06 pm
Forum: General Discussion Forum
Topic: 26-27 coupe windshield frame
Replies: 3
Views: 1908

Re: 26-27 coupe windshield frame

I did remove the slides and the brackets along with the windshield. I can't understand the brackets with the stud for the adjustment knobs only will on one way. So what changed?
by dunoon
Mon Oct 28, 2019 9:37 pm
Forum: General Discussion Forum
Topic: 26-27 coupe windshield frame
Replies: 3
Views: 1908

26-27 coupe windshield frame

I reinstalled the original windshield frame back into the body. The brackets that are riveted to the frame hit the posts that the knob for the sliders attach to and the brackets that the knob screws into is out of alignment with the sliders. There are no adjustments that I can find. Boy is this hard...
by dunoon
Thu Oct 24, 2019 10:46 am
Forum: General Discussion Forum
Topic: 26 - 27 Rear brake drum question
Replies: 8
Views: 3592

Re: 26 - 27 Rear brake drum question

I don't have hard time. I have the shoe off the car and attach the spring. Then I put the shoe on the backing plate and then push one of the shoe tabs on the cam and then use a screwdriver and pry the other on. It works for me.
by dunoon
Thu Oct 10, 2019 3:10 pm
Forum: General Discussion Forum
Topic: Just an idea
Replies: 0
Views: 1169

Just an idea

I haven't put in the interior in my 26 coupe yet. I notice that the battery box is just aft of the drivers door area and easy to get to, while the original way to the battery is climbing forward in the trunk area. Was thinking fo attaching the seat back to the package shield with a couple hinges so ...
by dunoon
Wed Oct 09, 2019 1:11 pm
Forum: General Discussion Forum
Topic: Climbing Hills
Replies: 6
Views: 3354

Climbing Hills

I took my 26 coupe out for a test drive this morn. It's still pretty stripped mainly just the body on the Chassis. But, running it in the garage it runs good so when I drove it on the road here in western Va. where all roads go either up or down I was surprised the it had a hard time climbing a 10% ...
by dunoon
Wed Oct 02, 2019 2:08 pm
Forum: General Discussion Forum
Topic: Caulking Recommendition
Replies: 2
Views: 1806

Caulking Recommendition

Earlier in the year I asked a question about applying sealant before I installed my top bows on a 26 coupe, Bob Booth answered and recommended a sealant made by Locktite but, I can't remember what it was and can't find the old message. If anyone would know wha to use let me know I'd appreciate it. T...
by dunoon
Thu Sep 19, 2019 10:17 am
Forum: General Discussion Forum
Topic: Seat Frame
Replies: 2
Views: 1599

Seat Frame

Is the wooden seat frame the same size of the bottom of the seat springs? had a new seat frame made for my 26 coupe, I didn't have one for a sample so I had a cabinet maker wing it from some photos, never thought about using the springs as a pattern. Setting my springs on it it is about 1 1/2" all w...
by dunoon
Wed Sep 11, 2019 10:41 pm
Forum: General Discussion Forum
Topic: What have you done with your T in September?
Replies: 81
Views: 22459

Re: What have you done with your T in September?

I've been working on my 26 coupe for a couple years, I bought it in 1962, and the last time it ran was 1965 till today. I finally was at the point to put the radiator on it. It cranked over with the started about twice and ran like a top, ran for about 15 min. I idled it down and you could count the...
by dunoon
Tue Sep 10, 2019 2:59 pm
Forum: General Discussion Forum
Topic: Hot or Cold
Replies: 3
Views: 2053

Re: Hot or Cold

For clearification rods are the ones that run from the steering column to the timer and the one to the carb.
by dunoon
Tue Sep 10, 2019 9:27 am
Forum: General Discussion Forum
Topic: Hot or Cold
Replies: 3
Views: 2053

Hot or Cold

I'm trying to install replacement throttle and spark rods. They need some major realignment and are impossible to bend with just my hands. I was going to bend them is a vice and thought maybe I should heat them first. Any suggestions? Thanks
by dunoon
Sun Sep 08, 2019 10:25 am
Forum: General Discussion Forum
Topic: Tail Light Wiring on 26 Coupe
Replies: 6
Views: 3368

Re: Tail Light Wiring on 26 Coupe

Thanks for the info
by dunoon
Sat Sep 07, 2019 10:40 pm
Forum: General Discussion Forum
Topic: Tail Light Wiring on 26 Coupe
Replies: 6
Views: 3368

Tail Light Wiring on 26 Coupe

I'm not exactly sure how the tail light wire goes. I'seen in vendors catalogs a wiring installation kit for the taillight. Not sure what the flat piece with the 3 holes and spring do and also the grommets with pigtails is for. Any help would be appreciated.
by dunoon
Fri Aug 30, 2019 4:01 pm
Forum: General Discussion Forum
Topic: How did you acquire your T?
Replies: 16
Views: 5869

Re: How did you acquire your T?

I was bitten by the Model t bug when I was 14 years old in 1961. I had a paper route and saved up enough money to serious looking, i was asking everyone if they knew of any old cars, I saw loads mostly setting in falling down barns or in fence rows. One kid in school I asked and he said his brother-...
by dunoon
Sat Aug 24, 2019 4:51 pm
Forum: General Discussion Forum
Topic: Classique Roof Kits
Replies: 4
Views: 2610

Classique Roof Kits

In the near future I'll be looking to buy a roof kit for my 26 coupe. Has anyone boughten one from classique? I hear nothing but good things about their upholstery kits. Were you satisfied and your thoughts about this kit? Thanks
by dunoon
Thu Aug 22, 2019 9:06 am
Forum: General Discussion Forum
Topic: Wooden Roof Frame
Replies: 3
Views: 1893

Re: Wooden Roof Frame

I've gotten most of the frame on now I notice there is about an1/8 gap between the top of the metal body and the underside of the frame I believe the rabbet was cut to deep. Is that going to cause a problem when I install the roof covering and the beading?
by dunoon
Wed Aug 21, 2019 10:08 am
Forum: General Discussion Forum
Topic: Wooden Roof Frame
Replies: 3
Views: 1893

Wooden Roof Frame

I'm trying to install a wooden roof frame kit on a 26 coupe. What a PIA, I've had to do a bit of cutting to get things to fit sort of. I can't see where the pieces in the rear corners and back piece above the rear window attaches to the body like the front and side pieces do. I see I'll be doing qui...
by dunoon
Wed Aug 14, 2019 8:17 pm
Forum: General Discussion Forum
Topic: Radiator Apron Not Fitting Right
Replies: 12
Views: 5112

Re: Radiator Apron Not Fitting Right

That's it, Thanks loads
by dunoon
Wed Aug 14, 2019 6:57 pm
Forum: General Discussion Forum
Topic: Radiator Apron Not Fitting Right
Replies: 12
Views: 5112

Radiator Apron Not Fitting Right

I went to put on the original apron that I removed over 50 years ago on a 26 coupe. When the crank hole and screw below hole is aligned up, the 2 tabs that go over the radiator studs are about a 1/2" above the frame. I don't remember anything between the tabs and the frame, am I wrong. I'd appreciat...
by dunoon
Sat Aug 10, 2019 2:29 pm
Forum: General Discussion Forum
Topic: Wooden Roof Frame
Replies: 1
Views: 1391

Wooden Roof Frame

I'm installing a new replacement roof frame on a 26 coupe. Should I paint it or seal it with something before installing the headliner and roof material?
by dunoon
Fri Aug 09, 2019 2:22 pm
Forum: General Discussion Forum
Topic: 26 Coupe Steering Column
Replies: 2
Views: 1654

26 Coupe Steering Column

Is there suppose to be any kind of rubber/cushion between the steering column and dash board?
by dunoon
Fri Aug 02, 2019 10:44 pm
Forum: General Discussion Forum
Topic: Wooden Roof Frame
Replies: 2
Views: 2005

Wooden Roof Frame

I nearly ready to start installing the wooden roof frame on my 26 coupe. Does anyone use a sealer/ RTV under the wood or do youse wait till it's on and then seal the space between the wood and the top edge of the body? Thanks
by dunoon
Thu Aug 01, 2019 10:40 pm
Forum: General Discussion Forum
Topic: What have you done to your T in August
Replies: 94
Views: 29171

Re: What have you done to your T in August

I installed the qtr and rear windows in my 26 coupe. I'm ready to start putting the wooden roof frame on does anyone put any kind se sealer down before mounting the wood frame?
by dunoon
Sun Jul 28, 2019 5:01 pm
Forum: General Discussion Forum
Topic: Sealing Windows
Replies: 0
Views: 1090

Sealing Windows

I have a 26 coupe. Does anyone use any kind of sealer between the rubber gasket and the body metal? Also the qtr window I've tried so far doesn't make an even contact all around. I've cleaned the channel well so there isn't any junk in it but it still isn't making good contact. Any suggestions Thanks
by dunoon
Fri Jul 12, 2019 10:35 pm
Forum: General Discussion Forum
Topic: Wire Routing
Replies: 1
Views: 1516

Wire Routing

Is there any place where I can find good detailed pictures of the wire routing for a 26 coupe. The Ford service manual is hard for me to see. Thanks
by dunoon
Sun Jun 30, 2019 9:32 am
Forum: General Discussion Forum
Topic: What Am I Missing?
Replies: 3
Views: 2103

Re: What Am I Missing?

Thanks that answers my questions.
by dunoon
Sat Jun 29, 2019 10:47 pm
Forum: General Discussion Forum
Topic: What Am I Missing?
Replies: 3
Views: 2103

What Am I Missing?

I was going to mount the hood shelf on my 26 coupe. But there is no way I can because of the cowl to frame bracket. These hood shelves are repros and I'm wondering if there is suppose to be a slot for the bracket. Any info would be great and pictures even better.
by dunoon
Thu Jun 27, 2019 10:45 pm
Forum: General Discussion Forum
Topic: 26-27 running board brackets
Replies: 4
Views: 2239

26-27 running board brackets

My running board brackets seemed to be bent. Should they be parallel to the floor. Also, what can I use as a reference for the brackets fore and aft. Im planning to bend them with a piece of pipe. Anybody have a better idea. Thanks
by dunoon
Wed Jun 19, 2019 5:33 pm
Forum: General Discussion Forum
Topic: 26 Coupe Body Blocks
Replies: 2
Views: 1756

26 Coupe Body Blocks

Getting ready to install the body blocks, not sure where they go I can figure out where a couple go. The ones I'm not sure where the ones that are somewhat thinner and have a grove across the middle. and how many are used? I have 4 about the size of 2x4 with 2 holes. Any help would be greatly apprec...