MTFCA Forum

VasaTrail

Steering wheel locks, I rebuilt the non-working one. Both work now.

VasaTrail

Hey JTT3,

I did not get an email.

VasaTrail

Buyer pays shipping and packaging

Pair of splash aprons - $125

Front Bumper Mounts - $70

Rear Bumper mounts - for full bars. - $70

Frame Cross Members - $100

VasaTrail

Buyer pay shipping and packaging.

Running Board - $80

Top Irons - $250

Dash - $100

VasaTrail

Buyer pays shipping and packaging.

Engine Splash pan - $40

Ruckstell Axle - Drivers Side - $50

Radiator, needs new neck will come with a neck - $125

Head - $80

Radiator Apron - $25

VasaTrail

Buyer pays shipping and packaging.
Boyco Can #1 - cap comes off and a spot then comes out of can. - $55

Boyco Can #2 - $55

Boyco Can #3 - $55

Boyco Can #4 - $50

VasaTrail

Buyer pays shipping and packaging.

Ruckstell Axle Housing - Passenger Side - $70

Belly Sling - Hooks for each side are included. - $30

Various Tools - $20

Battery Brackets - $30

Luggage Rack - $30

VasaTrail

I did but they have been sold.

VasaTrail

Done Dusty.

VasaTrail

No this is not the driver side housing. It is passenger.

VasaTrail

Hey all, Just thought I would add a little flavor on all the "Items for sale" that I have posted in the past two days. My father rebuilt a 1927 Model T 2 door roadster back in the 1960's. Sad to say his rebuilt T sat unused and undriven in the garage for 3 decades. he got bored with it but could n...

VasaTrail

And here are the items that I have not gotten pictures of yet. All these items are in good to great shape, junk bin excluded.

VasaTrail

Done. JTT3

VasaTrail

Buyer pays shipping and packaging

Piston Rings, x12 - $80

Battery Cutout Switch - $10

Timer - $20

Wheel Caps - $20

Water Pump - works, turns, etc. Made in Harding, MI - Unique piece - $100

VasaTrail

Buyer pays shipping and packaging

Sediment Bulb - $15

Windshield Chrome Wing Nuts - $15

Ford Stamped water inlet - $30

Ruckstell Axle Assembly Part - $20

Various Brass parts - $30

VasaTrail

Dusty. Done.

VasaTrail

Buyer pay shipping and packaging.

Ruckstell Rear End Bearing - $40

Gas Pedal Conversion - $30

Bumper clamps and backing plates - $30

Ruckstell Rear End Gearing - fielding offers

VasaTrail

Buyer pays shipping and packaging

Thurst Washer - $50

REar End Gear - $20

Fan Pulleys - $25

Steering Wheel Locks, both have keys, both work- $60

VasaTrail

Buyer pays shipping and packaging.

26/27 Turtle Deck Trunk Support - $20

Steering Gear Covers - $45

Ignition Covers x2 - $25

Top Bow Wooden Curves - $30

VasaTrail

Buyer pays shipping and packaging

Ez Fill Gas cap - $20

Champion Spark Plugs - $20

Oil Breather Cap - $5

Grease Cups - $20

E Brake Trim - $10

VasaTrail

Yes. It does fold stock steering wheel.

VasaTrail

Buyer pays shipping and packaging

Brakelight Switch - $25

License Plate Mount - $20

Wheel Bearings - $60

U Joint - $45

Top Mounts - $25

VasaTrail

Buyer pays shipping and packaging

Steering Gear Quadrant - $20

Stewart Warner Heater - Brand New in Box - $100

Plastic Coils - $20

Wood Coils #1 - $30

Wood Coils #2 - $10

VasaTrail

Buyer pays shipping and packaging.

Taillight Mount - $20

Headlight Rims - $30

Pump - $20

Body Blocks - $10

Cowl Tank Straps - $40

VasaTrail

Buyer pays shipping and packaging

Spare Tire Mount $30

Exhaust Cut out #1 - $30

Exhaust Cut out #2 - $30

Clutch Springs - $100

Ford Oil Can - No top - $10

VasaTrail

Buyer pays shipping and packaging
For larger items I can drop off at a local shipping company.

Battery Box - $40

Gas Gauge - Cap is broken - might be able to fix it - $20

Coil Boxes - $50 for all

VasaTrail

Buyer pays shipping and packaging
For larger items I can drop off at a local shipping company.

Wire Wheel Hub #1 - $45

Wire Wheel Hub #2 - $45

Saddles, Post, Leathers - $35

Holly Carbs - $40

Ford Oil Can - $20

VasaTrail

Buyer pays shipping and packaging.
Selling as a set. Everything below. Speedometer works. One mount is broken on the back.

$175

VasaTrail

Items for sale
Buyer pays shipping and packaging
For larger items I can drop off a local shipping company.

Vacuum Wiper Motors - $90

Horn - $30

Headlight Reflectors - $50

Ford Oil Can - $25

Transmission Bands and Ears - $70

VasaTrail

Items for sale Buyer pays shipping and packaging For larger items I will drop off at local shipping company. Wire Wheels - I have 3. All the same shape. - $200 IMG_2791.JPG Generator - Needs rebuild $50 IMG_2772.JPG Starter #1 - Needs Rebuild $50 IMG_2771.JPG Starter #2 $50 IMG_2770.JPG Explosion Wh...

VasaTrail

Items for Sale Buyer pays actual shipping and packaging. For larger items I will drop off at local shipping company. Step Plates - $40 IMG_2677[1].JPG Gun Spotlight $60 IMG_2728[1].JPG Model A Lug nuts that fit Model T - Brand New - $30 IMG_2679[1].JPG Light and lens - $50 IMG_2735[1].JPG Taillights...

VasaTrail

Items for sale Buyer to pay shipping and packaging. For larger items I will drop off at local shipping company 26-27 Right Fender - solid $150 IMG_2740[1].JPG 26-27 Cowl Gas Tank - lot's of sediment but tank is solid $100 IMG_2741[1].JPG 26-27 Pick-up Bed Front Panel - solid $60 IMG_2742[1].JPG 26-2...

VasaTrail

My father restored the car back in the 60’s and it ran fine for years. He stopped driving it about 30 years ago and I inherited it. I have rebuilt the car myself now, but I cannot get it to stay running. By working the choke, I have been able to keep it running for maybe 5 minutes at a time. My step...

VasaTrail

Might have a set if the top irons for a 25 are the same as a 26/27?

Anyone know the answer before I dig these out?

VasaTrail

Anyone have a Fulton exhaust cutout in working order that they are willing to part with?

VasaTrail

I believe the pinion is what is different not the joint.

VasaTrail

Thanks for the assist everyone!!

VasaTrail

I checked the lengths. They are spot on.

VasaTrail

Anyone? I know it is a needle in the haystack.

VasaTrail

Thanks everyone. I did find an original and at a decent price. I was aware of the Craigslist ad. It has been up for a long time. Seems to keep getting reposted.

VasaTrail

Interesting thought on the possibility of having the incorrect levers. I bought the new ones from Lang's for the 26/27. Can someone please measure the length of their levers and let me know?

VasaTrail

So on closer inspection of the rods, it appears my father had the same issue when he put everything together. He had to enlarge the hole on the spark lever to get the clevis on the very end of the rod. After reading everyone's comments I had two choices. One was the powder coat on the column and the...

VasaTrail

Need help on this one. I have a 1927 Model T. My father restored it 30 years ago and now I am restoring it again. My spark and throttle control levers do not go far enough through the steering bracket. Spark does not go far enough to put on the part that the spark control rod hooks on to. The thrott...

VasaTrail

Hey all,

In need of the spare tire mount for the 26/27 model t pickup. This is the mount that goes in front of the driver door. Attaches to the running board and the convertible top pivot mount. I have heard these are extremely rare to come by.

Anyone have one they are willing to part with?

VasaTrail

Hey all, I have the speedometer, I have the clamp, I have the spiral, I am pretty sure I have the cable. In need of the Stewart Rigid Joint, part #35012. This is the joint for wire wheels. Anyone have one they are willing to sell? BTW - per Stewart Warner catalog the part seems to have two part numb...

VasaTrail

Wheels have been sold. I will post again if something falls through.

VasaTrail

Turtle Deck is in the process of being sold. I will post again if something falls through.

Lil, second spare hood means a second trunk lid.

VasaTrail

Just converted my fathers 1927 model t to wire wheels. Now I need to get rid of the wooden wheels. These are in great shape. Comes with the tires, stem hardware, spare tire and 2 spare tire mounts. The spare does have one of the installation cleats broken. Not sure on the price. How about $2,000 for...

VasaTrail

Hey all, I am restoring my fathers 1927 Model T. I have done the work to the engine, frame, rear end, etc. The issue I have is the body. I am not an auto body person. I have been calling around trying to get someone to do the body work. Collision shops are not interested and if I go to a place with ...

VasaTrail

Hey all, I have converted my 1927 Model T from a turtle deck to a pickup. That means I have a turtle deck I don't need. It is in great shape. Comes with the floor as well as a spare hood and of course, keys. Not sure on the pricing. Was thinking around $700 for all. Make an offer. I do have a few mo...

VasaTrail

Anyone willing to rent me a rear hub puller? Will gladly pay the shipping to and from as well as a rental fee. I would buy one but no one has one in stock. Just need to get two wood wheels off and then putting on wire wheels. Rear end is off the frame but I am going to try towing the rear end around...

VasaTrail

Any luck? Looking for one myself.

VasaTrail

Anyone know of a qualified Model T engine rebuilder in Michigan? I have the engine down to the crank, cam, valves, pistons, etc. Could be absolutely fine the way it is, could be a hunk of junk. I am beyond my expertise in these areas and want someone to give it a once over.

Search found 53 matches