Search found 99 matches

by JH1427
Fri Jan 19, 2024 1:09 pm
Forum: Classifieds - Parts
Topic: WTB 21' Split rim
Replies: 2
Views: 246

Re: WTB 21' Split rim

Still looking, let me know if you plan to attend the Clinic.
by JH1427
Fri Jan 12, 2024 6:40 pm
Forum: Classifieds - Parts
Topic: WTB 21' Split rim
Replies: 2
Views: 246

Re: WTB 21' Split rim

Still looking. Had one good lead, but the other was a scammer. Before you text me a picture, make sure your rim looks like my picture. J
by JH1427
Wed Jan 10, 2024 12:57 pm
Forum: Classifieds - Parts
Topic: WTB 21' Split rim
Replies: 2
Views: 246

WTB 21' Split rim

I am looking for this style of spilt-rim. I will be at McPherson for the clinic next weekend, and if you will also be there, I would be interested in looking at your rim. Please contact me so we can talk terms. Jerry
785
432
3993
by JH1427
Fri Dec 08, 2023 6:12 pm
Forum: General Discussion Forum
Topic: Stevens T-180 Generator Gear Puller
Replies: 16
Views: 756

Re: Stevens T-180 Generator Gear Puller

When I picked up mine, it was also missing the punch. Had I seen this ad first, I would have better understood that it did not need a handle. A post with a picture and some dimensions would be great if anyone has the punch. J
by JH1427
Mon Dec 04, 2023 2:14 pm
Forum: Classifieds - Parts
Topic: Wanted: Rocker Arm for Frontenac
Replies: 4
Views: 454

Re: Wanted: Rocker Arm for Frontenac

If you are interested in putting the original style on, let me know; I have NEW castings. J
by JH1427
Mon Oct 30, 2023 2:17 pm
Forum: General Discussion Forum
Topic: Weaver press
Replies: 7
Views: 586

Re: Weaver press

I also have one of these presses. It works great. I also have it mounted backward. That is the way it was when I got mine at auction. I had to make a press plate as it was missing. If anyone has the correct dimensions for an original, I would very much appreciate it. If anyone has one with the cup, ...
by JH1427
Wed Oct 18, 2023 4:14 pm
Forum: General Discussion Forum
Topic: 21st annual Camerons swap meet Minnesota
Replies: 14
Views: 935

Re: 21st annual Camerons swap meet Minnesota

I was about to ask if it was still being done the first weekend of November. Can't make it this weekend unless I had been able to plan 6-8 weeks ago. Darn, was really hoping to go.
by JH1427
Sun Oct 15, 2023 7:10 pm
Forum: Classifieds - Parts
Topic: wanted: Frontenac intake spacer
Replies: 1
Views: 172

Re: wanted: Frontenac intake spacer

Keith, I have plans to cast a couple out of Bronze, just haven't gotten to it yet. I have the steel plates if you want to make one. You can make it whatever distance you want. I also have the exhaust side plates. J
by JH1427
Tue Oct 03, 2023 10:09 pm
Forum: Classifieds - Parts
Topic: WTB Header plate
Replies: 5
Views: 341

Re: WTB Header plate

What type are you looking for? I make several different plates. Let me know what you are look for. J
by JH1427
Fri Sep 29, 2023 9:39 pm
Forum: General Discussion Forum
Topic: Concrete House, Forms from Model T Running Boards
Replies: 21
Views: 1495

Re: Concrete House, Forms from Model T Running Boards

Somehow, this needs to be located. If anywhere close to me, I will stop by.
by JH1427
Fri Sep 15, 2023 5:05 pm
Forum: Classifieds - Parts
Topic: FS FRONT FENDER WITH IRONS (SOLD)
Replies: 3
Views: 258

Re: FS FRONT FENDER WITH IRONS (23-25)

DM sent JH
by JH1427
Fri Sep 15, 2023 3:23 pm
Forum: Classifieds - Parts
Topic: Vw Oil punp for sale
Replies: 1
Views: 259

Re: Vw Oil punp for sale

PM sent Thx J
by JH1427
Wed Aug 23, 2023 1:19 pm
Forum: Classifieds - Parts
Topic: Wood Plans
Replies: 4
Views: 364

Re: Wood Plans

I am in need of a set of plans for the 23-25 Roadster, if any out there feel free to drop me a line. Thx. Jerry
by JH1427
Thu Aug 03, 2023 6:22 pm
Forum: Classifieds - Parts
Topic: FS OUTSIDE BRAKE DRUM SET (SOLD)
Replies: 2
Views: 350

Re: FS OUTSIDE BRAKE DRUM SET (SOLD)

Please put me in line for them next. J
by JH1427
Tue Aug 01, 2023 5:30 pm
Forum: General Discussion Forum
Topic: Another Business Lost
Replies: 14
Views: 1614

Re: Another Business Lost

Heard over the weekend that Yello Truck Freaight is in the same boat.
by JH1427
Fri Jul 28, 2023 1:08 pm
Forum: General Discussion Forum
Topic: Boyco Running Board Can Replica
Replies: 12
Views: 1393

Re: Boyco Running Board Can Replica

Thanks for the work, they look great. J
by JH1427
Wed Jul 26, 2023 3:44 pm
Forum: Classifieds - Vehicles
Topic: SOLD ---1926 Ford Model TT dump truck.
Replies: 4
Views: 1483

Re: 1926 Ford Model TT dump truck

Congrats Jack!
by JH1427
Mon Jul 24, 2023 2:55 pm
Forum: General Discussion Forum
Topic: Switch Question:
Replies: 3
Views: 490

Switch Question:

I have a Question: I am working on restoring my switch plate for my 1924 Touring, the back side terminal cover is this one on the left, it uses tabs that are folded back onto the piece to hold it together. It also has 6 terminations. Because I still do not have this project done, I have decided to u...
by JH1427
Mon Jul 17, 2023 3:12 pm
Forum: General Discussion Forum
Topic: Aux trans, or Rucktell?
Replies: 15
Views: 1152

Re: Aux trans, or Rucktell?

In my experience, having a Rucktell, most drivers have changed to a 3 to 1 ring and pinion. This gives you a little more top end. Sorta like a poor mans overdrive. When the engine is tired, and needs to be rebuilt, you will most often start out in Low Low, then shift to High Low, and then High Direc...
by JH1427
Fri Oct 21, 2022 9:06 pm
Forum: Classifieds - Parts
Topic: WTB steel parts kit for a wood pickup bed
Replies: 9
Views: 1139

Re: WTB steel parts kit for a wood pickup bed

Dave, dm me, and I will try and get some pics this weekend. I have hardware from a bed that may work for you. Jerry
by JH1427
Wed Apr 27, 2022 1:20 am
Forum: Classifieds - Parts
Topic: Front Wire Wheel Hubs-project
Replies: 3
Views: 1188

Re: Front Wire Wheel Hubs-project

Sold Pending Payment
by JH1427
Wed Apr 20, 2022 11:04 pm
Forum: Classifieds - Parts
Topic: Front Wire Wheel Hubs-project
Replies: 3
Views: 1188

Front Wire Wheel Hubs-project

Here is a pair of front hubs, spindles turn freely. Chassie was near-total death but was able to salvage the front hubs. Left for you is to get the last of the wheel off. $75.00 for the pair, you pay the shipping. I am right in the middle of the country so going east or west should be the same.
by JH1427
Tue Mar 08, 2022 9:27 pm
Forum: Classifieds - Parts
Topic: All sold NOS " Ford script" steering arms (pitman arm)
Replies: 8
Views: 1417

Re: All sold NOS " Ford script" steering arms (pitman arm)

Donnie, if you come across one more could you bring it next week? Jerry
by JH1427
Tue Sep 28, 2021 9:50 am
Forum: Classifieds - Parts
Topic: One piece spindles for sale
Replies: 3
Views: 1787

Re: One piece spindles for sale

bumpity bump
by JH1427
Tue Sep 21, 2021 10:40 am
Forum: Classifieds - Parts
Topic: One piece spindles for sale
Replies: 3
Views: 1787

Re: One piece spindles for sale

Not all photos uploaded, here is a couple more.
by JH1427
Tue Sep 21, 2021 10:37 am
Forum: Classifieds - Parts
Topic: One piece spindles for sale
Replies: 3
Views: 1787

One piece spindles for sale

The painted one is 1921 and is on the right side spindle. The one with the hub(6") is an early left side spindle. Shipping on the painted one is $15.00 if sold by itself. The early spindle with hub, shipping will be $22.50, insurance is on you. Ashing $125.00 for the 1921 painted spindle. $475 for t...
by JH1427
Tue Jun 22, 2021 11:17 pm
Forum: Classifieds - Parts
Topic: Speedster parts at the Reunion
Replies: 0
Views: 893

Speedster parts at the Reunion

I will have with me at the Reunion in Lincoln this week the following New parts: Overhead Valve spring sets New unmachined Fronty rockers and stands Header plates for RAJO and Fronty, Carb plates also- NH, Miller, Model A and Zenith HP5A Heater plates for flat head T motors: stock 1 1/4" openings on...
by JH1427
Tue Jun 22, 2021 11:09 pm
Forum: Classifieds - Parts
Topic: For Sale Set pf 26-27 Ford Wire Wheels
Replies: 2
Views: 1158

Re: For Sale Set pf 26-27 Ford Wire Wheels

(Extra two Wheels) I have a set of four-wire wheels and a set of hubs for the 1926-1927 Model T Ford. I will have these with me at the Speedster Reunion this week in Lincoln Ne. So free delivery if you pick up from me there. I have not sandblasted any of these four, so no hiding the shortcomings. Tw...
by JH1427
Tue Jun 22, 2021 11:08 pm
Forum: Classifieds - Parts
Topic: For Sale Set pf 26-27 Ford Wire Wheels
Replies: 2
Views: 1158

Re: For Sale Set pf 26-27 Ford Wire Wheels

More pictures
by JH1427
Tue Jun 22, 2021 11:06 pm
Forum: Classifieds - Parts
Topic: For Sale Set pf 26-27 Ford Wire Wheels
Replies: 2
Views: 1158

For Sale Set pf 26-27 Ford Wire Wheels

I have a set of four-wire wheels and a set of hubs for the 1926-1927 Model T Ford. I will have these with me at the Speedster Reunion this week in Lincoln Ne. So free delivery if you pick up from me there. I have not sandblasted any of these four, so no hiding the shortcomings. Two wheels are very g...
by JH1427
Tue Mar 09, 2021 11:33 pm
Forum: Classifieds - Parts
Topic: WTB 1924 Engine
Replies: 12
Views: 2923

Re: WTB 1924 Engine

I have a couple but will need to check the numbers, will let you know on wed. J
by JH1427
Tue Jan 12, 2021 11:48 pm
Forum: General Discussion Forum
Topic: Luray swap meet
Replies: 5
Views: 1698

Re: Luray swap meet

Have the dates been set?
by JH1427
Sun Jan 03, 2021 2:28 pm
Forum: Classifieds - Parts
Topic: aluminum disc wheels
Replies: 3
Views: 2065

Re: aluminum disc wheels

William, might there be an offering in 19" size? J
by JH1427
Fri Aug 14, 2020 5:32 pm
Forum: Classifieds - Parts
Topic: Needing these two items: please look
Replies: 7
Views: 3321

Needing these two items: please look

Hello, I need an accessory light such as the one pictured. Diameter is about two inches with the lens and bezel a little larger. Lastly, looking for a wing nut for a windshield clampdown, should be a coupe around 1922, I need one with good threads. Thanks, Jerry
by JH1427
Thu Apr 16, 2020 12:57 am
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

Still looking
by JH1427
Sun Mar 01, 2020 10:29 am
Forum: Classifieds - Parts
Topic: WTB 1921 front Spindle
Replies: 2
Views: 1612

Re: WTB 1921 front Spindle

bump to the top
by JH1427
Tue Feb 25, 2020 12:56 am
Forum: Classifieds - Parts
Topic: WTB 1921 front Spindle
Replies: 2
Views: 1612

WTB 1921 front Spindle

Looking for right side one-piece spindle for 1921 front axle. Jerry
by JH1427
Fri Dec 13, 2019 10:36 pm
Forum: General Discussion Forum
Topic: Do these brackets look familiar?
Replies: 3
Views: 2211

Re: Do these brackets look familiar?

Thanks, Dean, that's it!
by JH1427
Fri Dec 13, 2019 3:34 pm
Forum: General Discussion Forum
Topic: Do these brackets look familiar?
Replies: 3
Views: 2211

Do these brackets look familiar?

I try to minimize these types of posts but I have no clue on these brackets. Iif somebody knows what they were meant for, much appreciated. I'm helping a buddy on his Model T project and these came with it. Just sorting things out. Thanks in advance.
by JH1427
Wed Oct 23, 2019 7:20 pm
Forum: General Discussion Forum
Topic: Motometer thermo replacement part
Replies: 28
Views: 9557

Re: Motometer thermo replacement part

I too have a NOS moto meter that was stored on its side for the last 80+ years. It will be one of my winter break projects.
by JH1427
Mon Oct 21, 2019 10:34 am
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

Still interested in finding a copy of the MTFCA video on the cutout. The first one, made back in the early '90s when the project was started with Richard Oswald former President of the MTFCA.
by JH1427
Thu Oct 17, 2019 1:32 pm
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

Still looking for a copy
by JH1427
Thu Oct 03, 2019 11:52 pm
Forum: General Discussion Forum
Topic: Wood firewall questions pictures
Replies: 7
Views: 3311

Wood firewall questions pictures

Does this new firewall look correct for a 1919. I have a 21 and would think this one should look closer to that one. Many questions. Is the outside edge correct? Seems like the angle to the bevel is greater than it should be. He has new firewall brackets and should raise this a bit higher. What are ...
by JH1427
Tue Sep 24, 2019 10:48 am
Forum: Classifieds - Parts
Topic: Wanted Bracket
Replies: 2
Views: 1748

Wanted Bracket

Looking for this small bracket. Not made by Ford but over the counter. I believe used for holding a mirror on a wood cab/body. Text is ok. Jerry
by JH1427
Tue Sep 24, 2019 10:44 am
Forum: Classifieds - Parts
Topic: Michigan Licence plates For Sale
Replies: 1
Views: 1511

Michigan Licence plates For Sale

Two 1924 and one 1921. The 24 that has been repainted $38.00, the unpainted ones $34.00 ea. Shipping will be $9.00. If you want all three I'll ship for the same $9.00 Jerry Text me is ok.
by JH1427
Tue Sep 24, 2019 10:38 am
Forum: General Discussion Forum
Topic: Help on a switch 26/7
Replies: 1
Views: 1564

Help on a switch 26/7

Reassembling this switch I'm working on and can not remember if the little hole is placed at the top or bottom. I have it circled in green in the photo. This is riveted and I only have one set of rivets so don't want to mess it up. The nuts and bolts is to hold it while i rivet it together. Am I cor...
by JH1427
Mon Sep 09, 2019 8:18 pm
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

Still Looking
by JH1427
Thu Jun 27, 2019 1:27 pm
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

I'm still looking for this VHS tape, If you have a copy but are not interesting is getting rid of it, I can make a copy.
by JH1427
Mon Apr 15, 2019 8:59 pm
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

bump
by JH1427
Mon Mar 18, 2019 10:16 pm
Forum: General Discussion Forum
Topic: I need a measurement favor....
Replies: 7
Views: 3811

Re: I need a measurement favor....

Per Ford Drawing the rear crankshaft flange is .316/.320 then finished ground to .3125 give or take. This should give you a starting point. J
by JH1427
Fri Mar 15, 2019 8:47 pm
Forum: General Discussion Forum
Topic: Chickasha
Replies: 8
Views: 5225

Re: Chickasha

I have gone to the swap meet in Richmound every year starting in 2015. Last year because of the Nat'l tour in Richmond the date was moved to follow the tour. I looks like it will be back to the first weekend of June for this year. The same weekend the Denver MTFCA chapter is having a Model T only sw...
by JH1427
Fri Mar 15, 2019 8:34 pm
Forum: Classifieds - Parts
Topic: WTB Windshield Hinges
Replies: 4
Views: 2927

Re: WTB Windshield Hinges

Found no longer looking. Thanks
by JH1427
Mon Mar 11, 2019 12:38 am
Forum: Classifieds - Parts
Topic: Wanted WTB TT rear wheel. Going to Chickasha
Replies: 8
Views: 3823

Re: Wanted WTB TT rear wheel. Going to Chickasha

I too am looking for one like this plus the spilt rims that fit this. Not trying to hijack this post just adding my name to the "list" J
by JH1427
Mon Mar 11, 2019 12:36 am
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

I'm still looking for this VHS tape, If you have a copy but are not interesting is getting rid of it, I can make a copy.
by JH1427
Mon Mar 11, 2019 12:34 am
Forum: Classifieds - Parts
Topic: WTB Windshield Hinges
Replies: 4
Views: 2927

Re: WTB Windshield Hinges

I'll be looking for these at Chickasha Swap Meet later in the week, If your bring some let me know. J
by JH1427
Mon Feb 25, 2019 12:59 pm
Forum: Classifieds - Parts
Topic: WTB Windshield Hinges
Replies: 4
Views: 2927

Re: WTB Windshield Hinges

Bumpy Bump
by JH1427
Mon Feb 25, 2019 12:59 pm
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

Still Looking
by JH1427
Sat Feb 16, 2019 11:51 pm
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

Re: WTB VHS Tape MTFCA

Bump
by JH1427
Fri Feb 15, 2019 11:30 am
Forum: Classifieds - Parts
Topic: WTB Windshield Hinges
Replies: 4
Views: 2927

Re: WTB Windshield Hinges

BUMP
by JH1427
Mon Feb 11, 2019 7:09 pm
Forum: Classifieds - Parts
Topic: WTB VHS Tape MTFCA
Replies: 10
Views: 4737

WTB VHS Tape MTFCA

Still interested in finding a copy of the MTFCA video on the cutout. The first one, made back in the early 90's when the project was started with Richard Oswald former President of the MTFCA.
by JH1427
Tue Feb 05, 2019 12:57 pm
Forum: Classifieds - Parts
Topic: WANTED to BUY
Replies: 7
Views: 4989

WANTED to BUY Cut Out VHS Tape

Thanks, Scott for the input. I'll repost next week if no response to this posting.
by JH1427
Tue Feb 05, 2019 12:42 pm
Forum: Classifieds - Parts
Topic: WANTED to BUY
Replies: 7
Views: 4989

Re: WANTED to BUY

Bump
by JH1427
Mon Feb 04, 2019 10:22 am
Forum: Classifieds - Parts
Topic: WTB Windshield Hinges
Replies: 4
Views: 2927

WTB Windshield Hinges

Need hinges like this, need at least the two parts that attach to the frame, the bolt and wing nut are not a problem, but a bonus if complete. Let me know what you have, willing to make up a set from different people. Rusty is ok, Jerry
Adddress.jpg
Adddress.jpg (3.23 KiB) Viewed 2927 times
IMG_20180609_100538.jpg
IMG_20180609_100538.jpg (29.21 KiB) Viewed 2927 times
by JH1427
Tue Jan 29, 2019 10:21 am
Forum: General Discussion Forum
Topic: Midwinter Clinic
Replies: 7
Views: 3754

Re: Midwinter Clinic

Ment to insert this pic also.
DSC00306.JPG
by JH1427
Tue Jan 29, 2019 1:16 am
Forum: Classifieds - Parts
Topic: WANTED to BUY
Replies: 7
Views: 4989

Re: WANTED to BUY

BUMP
by JH1427
Tue Jan 29, 2019 1:00 am
Forum: General Discussion Forum
Topic: Midwinter Clinic
Replies: 7
Views: 3754

Re: Midwinter Clinic

Here are a few pics from the afternoon, Steve was gracious enough to talk about Spark Plug restoration and installing metal Valve Stems in new tubes.
DSC00311.JPG
DSC00319.JPG
DSC00322.JPG
IMG_0522.jpg
by JH1427
Sun Jan 27, 2019 10:54 pm
Forum: General Discussion Forum
Topic: Magazine Wanted
Replies: 9
Views: 4357

Re: Magazine Wanted

I don't ever recall it being featured on the cover of the Vintage Ford or Model T Times. I've seen the car, know the original builder and he was on the old forum, so maybe he's here. If he posts here, great, if you get tired of waiting, let me know i'll give you his contact info.
by JH1427
Wed Jan 23, 2019 10:02 am
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Still taking RSVP's, the caterer has a number for lunch and so not able to add to that number, but would still be nice to have a number if your coming. Dinner on Friday is open and so no reservation needed but again a head count makes it better for the restaurant to handle a larger crowd.
by JH1427
Tue Jan 22, 2019 12:07 pm
Forum: Classifieds - Parts
Topic: WANTED to BUY
Replies: 7
Views: 4989

Re: WANTED to BUY

Still interested in finding a copy of the MTFCA video on the cutout. The first one made back in the early 90's when the project was started with Richard Oswald former President of the MTFCA.
by JH1427
Mon Jan 21, 2019 10:27 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Bump
by JH1427
Sat Jan 19, 2019 7:26 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Up to 25 now, still have a few days. J
by JH1427
Fri Jan 18, 2019 2:59 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

We'er at 21 pre reg. Still needing some people to talk about tools, we have a little over half the time allotted for this filled.
by JH1427
Thu Jan 17, 2019 12:42 am
Forum: Classifieds - Parts
Topic: WANTED to BUY
Replies: 7
Views: 4989

Re: WANTED to BUY

Bumpity bump
by JH1427
Wed Jan 16, 2019 12:46 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Customary Bump back to the top. A FYI I've only had so far 14 pre register, not enough to even get a caterer involved. Lets hope we don't have to cancel. J
by JH1427
Mon Jan 14, 2019 1:44 pm
Forum: Classifieds - Parts
Topic: WTB BOSCH FRONT PLATE DISTRIBUTOR
Replies: 15
Views: 7611

Re: WTB BOSCH FRONT PLATE DISTRIBUTOR

Are you using a block with or without a generator? This will make it easier to "find" one that fits your application.
by JH1427
Mon Jan 14, 2019 1:13 pm
Forum: General Discussion Forum
Topic: Anyone on here who was on the first Forum?
Replies: 74
Views: 21604

Re: Anyone on here who was on the first Forum?

I've got saved emails from June of 98', back in the day of dial up. Has when I first started a 486DX compac that was ok, the problem was after work (5 o'clock) I would try and log on to check the form and e-mail, and all the High School kids would be on there and it may take 20-30 minutes to make a ...
by JH1427
Mon Jan 14, 2019 12:46 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Monday Morning Bump
by JH1427
Sat Jan 12, 2019 7:41 pm
Forum: General Discussion Forum
Topic: Warford Alum & Cast Iron
Replies: 2
Views: 2041

Warford Alum & Cast Iron

Ok I finished the clean up on my aluminum case Warford this week and today I found a used CI case on eBay thanks to a fellow forum member. Same seller had an aluminum case. My brain went to an Oh, and Will it mode, and came up with a couple of questions: so If anyone here has the answer I'd be grat...
by JH1427
Sat Jan 12, 2019 3:20 pm
Forum: General Discussion Forum
Topic: Drawing Needed
Replies: 4
Views: 3041

Re: Drawing Needed

Having a little difficulty reading part of the print, anyone have a cleaner copy?
by JH1427
Sat Jan 12, 2019 3:19 pm
Forum: Classifieds - Parts
Topic: WANTED to BUY
Replies: 7
Views: 4989

Re: WANTED to BUY

Bump Still looking Still hoping, If you have a copy I'd be ok with a copy of your copy. J
by JH1427
Sat Jan 12, 2019 3:07 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Just todays Bump[/size]
by JH1427
Fri Jan 11, 2019 11:31 pm
Forum: Classifieds - Parts
Topic: WTB: Warford Alum. Case
Replies: 3
Views: 2936

WTB: Warford Alum. Case

Got mine apart, found the case around the bottom with a Big Nasty Crack in the casting. I have not yet tried to weld it but it's an option. In the mean time, If someone has a case I'm interested. My gears are primo, must have cracked why back when, so just need a case and if you have one that is ext...
by JH1427
Fri Jan 11, 2019 10:13 pm
Forum: General Discussion Forum
Topic: Drawing Needed
Replies: 4
Views: 3041

Re: Drawing Needed

Thanks Dan, that will work for me. J
by JH1427
Fri Jan 11, 2019 2:07 pm
Forum: General Discussion Forum
Topic: We're About to Get Hammered
Replies: 31
Views: 10850

Re: We're About to Get Hammered

Right along I-70 at the west edge. Raining a good bit right know, expecting it to change over to snow in 3-4 hours. Forecast is 3-7 by tomorrow afternoon. No plans to take the T to coffee in the morning, it will have to wait till next week.
by JH1427
Fri Jan 11, 2019 2:04 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Just a bump to keep it relevant and so far those interested in bring tools are angling away from Ford Tools, so if you want to talk about and show your Ford stuff let me know. J
by JH1427
Fri Jan 11, 2019 2:25 am
Forum: General Discussion Forum
Topic: Drawing Needed
Replies: 4
Views: 3041

Drawing Needed

this pic, posted earlier is of the 09 front axle. Am needing the equivalent but for the later axle with room for the spindle arm hole. Help?
by JH1427
Thu Jan 10, 2019 11:20 pm
Forum: General Discussion Forum
Topic: Interesting T head
Replies: 8
Views: 5024

Re: Interesting T head

Cris Essaguards(sp) plane in the MTFCA museum in Richmond is equipped with an aluminum head and uses two spark plugs with two ignition sources.
by JH1427
Thu Jan 10, 2019 1:36 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

Thanks Steve, I missed that. A question has come up about where to send a check, there is no need to send us the money first, Just let us know you are coming, this way an accurate count can be made. J
by JH1427
Thu Jan 10, 2019 11:56 am
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

Re: 2019 Sunflower Crankers Clinc

My phone number is 785.32.3993 and please use the clubs email: sunflowercrankers@att.net to both Reg and confirm lunch, and any tools ideas you want to bring. Thanks Jerry
by JH1427
Thu Jan 10, 2019 12:39 am
Forum: Classifieds - Parts
Topic: WANTED to BUY
Replies: 7
Views: 4989

WANTED to BUY

Looking for a copy of the MTFCA how to video on the generator cut out. This will be on VHS, and I am looking for the first one made with past president Richard Oswald from Denver, made/filmed sometime in the mid 90's. I already have the current DVD and an earlier VHS copy made after Fred Houston too...
by JH1427
Wed Jan 09, 2019 10:37 pm
Forum: Forum Support Questions
Topic: Explain Your Avatar
Replies: 41
Views: 18451

Re: Explain Your Avatar

dadnmeinTm.jpg I used this pic and downsized it to work. It is a picture of my farther and me ( I'm about 18 mos old) about ten years before he started on the restoration of the 1924 touring he bought in 1948 at the age of 21. His plans was to put a v8 60 in it but never got around to it. On the Na...
by JH1427
Wed Jan 09, 2019 10:19 pm
Forum: General Discussion Forum
Topic: 2019 Sunflower Crankers Clinc
Replies: 12
Views: 5952

2019 Sunflower Crankers Clinc

Clinic 2019.JPG Please Note the following: Cost is if you pre register $8.00 and will be $10.00 at the door. This is the first time in over 30 years of having this event that the cost has gone up. Lunch, Cutoff date to R.S.V.P. is Tuesday January 22nd. I have to call the caterer with the total a li...
by JH1427
Tue Jan 08, 2019 1:44 pm
Forum: General Discussion Forum
Topic: How to Add an Avatar Photo
Replies: 112
Views: 35297

Re: How to Add an Avatar Photo

Here you go George. If on a Windows machine right click this pic, go to save as, remember where you put it on your computer then open paint not 3d paint and you can do this by finding the file where you put it, then clicking on it once, then right clicking and scroll down till you get to "open with"...
by JH1427
Tue Jan 08, 2019 12:59 am
Forum: Forum Support Questions
Topic: Adding An Avatar Most Viewed Thread!
Replies: 2
Views: 2684

Re: Adding An Avatar Most Viewed Thread!

Soon to be a non issue as most everyone gets used to the new forum.
by JH1427
Mon Jan 07, 2019 1:08 pm
Forum: General Discussion Forum
Topic: How to Add an Avatar Photo
Replies: 112
Views: 35297

Re: How to Add an Avatar Photo

OK YES IT'S IN ALL CAPS SO YOU WILL NOTICE. RESIZE YOUR PIC THEN SAVE IT AS A .GIF THIS WILL BE THE SMALLEST FORMAT AND SHOULD UPLOAD EASILY.
by JH1427
Mon Jan 07, 2019 12:55 pm
Forum: General Discussion Forum
Topic: How to Add an Avatar Photo
Replies: 112
Views: 35297

Re: How to Add an Avatar Photo

I went thru 5 pictures trying to change/upload and each time I got the same thing, file needs to be 90x90 and smaller than 21KB. It finally downed on me that it was restating the obvious, and even when my file was small enough so when you get a pic small enough to upload hit submit if it isn't small...