MTFCA Forum

The lamp is in cosmetically good shape and will need some elbow grease to polish it up. This was missing the front glass lens when it came to me so the silver plated reflector surface is grimy and tarnished. I found a lens for it and added it a while ago. This would look great restored and mounted o...

perry kete wrote: ↑
Thu Apr 01, 2021 1:57 pm
One heck of a man who can step out of his car and twist his ankle on a woody!

I forgot to tuck it in my sock that day!

I believe these to be the rears to go with those front curly shocks
http://www.mtfca.com/discus/messages/11 ... 1275097811

I still tune in here I just don't post like I used to. I miss the old format it was a lot more community friendly and you could post more then five photos to complete a post. Ten years later Woody rides inside the car on the APCO steering column brace. woody.jpg The back story behind Woody is that I...

Tell your kids and grand kids I'm sorry!

(Originally posted here almost ten years ago on July 7th 2011)

I took this from a mineral specimen buy sell trade group I am in and thought people here should know this new tax liability just enacted into law. if you’re in the US and you haven’t been paying taxes on your minor mineral sales (even just occasional hobby sales), be aware that the IRS is now tracki...

I ran this single plate on the front of our 1915 roadster while running the modern registered plate with tags on the rear for a number of years before I found a pair to register and run on the car. I no longer need this plate and I am Asking $95 for it plus postage, which is what I paid for it back ...

This period dealer dash plaque is in Mint as new condition. Asking $35 with free first class mail shipping in the lower 48.

Please use this email address below and NOT the personal messaging system to contact me.

: email.jpg (11.17 KiB) Viewed 314 times

This neat period accessory allows you to pull for choke as well as adjust your carburetor mixture. It's in good used condition. Asking $75 plus postage.

Please use this email address below and NOT the personal messaging system to contact me.

: email.jpg (11.17 KiB) Viewed 215 times

: kmc 4.jpg (121.31 KiB) Viewed 186 times

I believe this to be New old stock and will need to be gone through from sitting all these years.. It's been on my accessory collection shelf for a bunch of years along with the spare carb. and needs to go to someone who will install and run it. I think it would be great for a stationary Model T pow...

This is a brand new bracket I purchased from one of the vendors years ago for a speedster project that I never got around to. These sell for $100 plus shipping at the vendors these days. I am asking $85 plus postage. neverout tail lamp license plate bracket 1.jpg neverout tail lamp license plate bra...

Here's a cute little spotlight that mounts to the arm of your side view mirror. You can either pop rivet it or bolt it to your mirror. It appears to be nickel plated under the scuffed black paint. it's in overall good cosmetic condition, an would make an interesting addition to your T. this is the o...

The lamp is in cosmetically good shape and will need some elbow grease to polish it up. This was missing the front glass lens when it came to me so the silver plated reflector surface is grimy and tarnished. I found a lens for it and added it a while ago. This would look great restored and mounted o...

This is a complete setup designed to fit a Model T by a leading supplier of accessory products for the Model T. It's in good working order and replaces the stock muffler. Read the Ad I have included for more information on this unit. Asking $175 plus medium flat rate postage. apco cutout 1.jpg apco ...

Here's one of our cases of Model T accessories

This is a extremely hard to find salesman's sample Anderson ANCO timer setup designed to show how the flapper works. The timer itself can be run on your car if desired aside from the hand piece. Asking $135 plus small flat rate shipping. anco2.jpg anco3.jpg anco1.jpg Please use this email address be...

This is a nice set of mint accessory cast iron and brass spring loaded brake rod supports. Asking $70 plus postage.

Please reply to my email address below if your interested since I don't follow the email system here, thanks.

: email.jpg (11.17 KiB) Viewed 230 times

These would be great for those of you who don't want to drill holes in your running boards for mounting a tool box. Just bolt this set of clamps onto the bottom of your toolbox and you will be able to clamp instead bolt the toolbox on the running board. Asking $45 for the set plus postage. toolbox b...

This is a great accessory for taking the flex out of your steering column and it's in excellent condition. I have included a photo of one of these installed on our 1915 Roadster. It definitely keeps the steering column rigid plus it is and original period correct accessory, not a modern cast repop. ...

Please reply to my email address below if your interested since I don't follow the email system here, thanks.This is a nice set of mint accessory cast iron and brass spring loaded brake rod supports. Asking $70 plus postage.

This cast iron extension either raises or lowers by 4 inches for a updraft or downdraft carb. Asking $45.

Please reply to my email address below if your interested since I don't follow the email system here, thanks.

: email.jpg (11.17 KiB) Viewed 304 times

It has a few tiny age dings and will need a new pump leather to actually use but looks great for it's age! Great for a display with your Model T. Asking $55 plus postage. tire pumpford 1.JPG tire pump ford 2.JPG tire pump 3.JPG Please reply to my email address below if your interested since I don't ...

I've had this Sandy Hook Fire Dept. car badge for a long while now. It's a memento of all the great times I had visiting the museum and speaking with Henry Austin Clarke Jr. Only 50 of these were made and shared with friends by Austin. This is one of those badges. It's in mint condition and measures...

SOLD!!!THANK YOU MTFCA

This is the tool you use to install fastener eyelets on your soft top. It's in mint condition. Asking $45 plus postage.

: united carr 2.jpg (33.12 KiB) Viewed 277 times

: united carr1.jpg (42.1 KiB) Viewed 277 times

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: email.jpg (11.17 KiB) Viewed 277 times

As a matter of fact I am just now getting ready to get up and make a pot. Thanks for the heads up my friend!

Oil cans in great shape, holder is a brand new repop. Asking $40 plus postage. Please reply to my email address below if your interested since I don't follow the email system here, thanks.

: email.jpg (11.17 KiB) Viewed 331 times

The carburetor is in good used condition and could easily be cleaned up and adjusted to run on your T. Here's a link to the ACCESSORY OF THE DAY post I added to the Forum here back in 2010. http://www.mtfca.com/discus/messages/118802/134206.html?1270500148 A copy of the original instruction sheet co...

This is a die-cast unit and the metal is in wonderful condition. Points and rotor look good. You will need to find a cap. Comes with a cam gear that is pitted. Asking $40 plus postage. Please reply to my email address below if your interested since I don't follow the email system here, thanks. Thoma...

I have this New Old Stock heater setup I am willing to sell. Here's the ACCESSORY OF THE DAY POST from May 2010 http://www.mtfca.com/discus/messages/118802/141358.html Email me for particulars.

: email.jpg (11.17 KiB) Viewed 480 times

SOLD! THANK YOU MTFCA!!!

SOLD!!!!! THANK YOU MTFCA!!!

This is a neat accessory that would look trick on a speedster or for that fact any Model T. I had a club member make up a set of new U bolts using a original set as a pattern. I have only seen one other one of these in all my years of collecting that a local friend has. It was his unit that had the ...

SOLD! THANK YOU MTFCA!

These came to me new in the original crumbling acid paper box's. It is the nicest foot feed gas pedal I have ever come across for the Model T. I have included a copy of the installation instructs which you can enlarge and read to learn more about the device. Asking $120 plus postage. I am throwing i...

This is a very nice low profile locking running board can setup in gently used condition (see photos) Asking $345 These lower profile setups are harder to come by then the commonly seen tall can setups. Please reply to my email address below if your interested since I don't follow the email system h...

This is a new original 100 year old period gas gauge with the remains of it's original box. Asking $120 plus postage. Please reply to my email address below if your interested since I don't follow the email system here, thanks. LEE day night gauge 1.jpg LEE day night gauge 2.jpg LEE day night gauge ...

NEW PRICE $!20 Plus shipping

ASKE accessory intake manifold has a electric glow wire element to help vaporize gas in cold weather. It's in good condition and it's a hard to find accessory for your Ford!. Asking $85 plus postage.Please reply to my email address below if your interested since I don't follow the email system here,...

SOLD! THANKS MTFCA!!!

This is a brand new never used complete cast aluminum setup that was reproduced by Max Edmunds of the Motherlode Model T Club back in the 1980's from a original unit and comes with a accessory Brass see through inline accessory site gauge. It is complete and ready to bolt on Asking $145 plus postage...

This is a original Model T period side view mirror. The mirror itself is bright and in excellent usable shape. The metal work could use a new coat of paint or leave as is for a "original" condition car. Asking $55 plus postage. .Please reply to my email address below if your interested since I don't...

SOLD!!!!!!!!!!

SOLD!!! Thank You MTFCA!

SOLD!!!!! Thank You MTFCA!

Here's a neat counter display card of Stevens tire pump leathers in the original manila envelope. The card has one unit out of twelve missing. Asking $85 plus shipping.Please reply to my email address below if your interested since I don't follow the email system here, thanks Stevens pump leathers 1...

This is a neat period accessory for your Model T. Here's is the thread I posted on it under the ACCESSORY OF THE DAY posts that I posted for many years on this Forum http://www.mtfca.com/discus/messages/118802/120831.html?1293487927 . I have only seen this one in all my many years of collecting Mode...

This is a nearly impossible speed equipment carburetor to find in ANY condition let alone in mint restored condition! This carburetor was restored by master brass carburetor restorer Stan Howe for me from a near mint condition unit. This carburetor was used on aircraft of the period and adapted by t...

Check out the accessory of the day post I did on this manifold.

http://www.mtfca.com/discus/messages/17 ... 1301086571

A good friend needs 6 of these for A set of TT wheels he's restoring. Any help would be appreciated, Thanks!

: RICH 1.jpg (41.6 KiB) Viewed 362 times

: RICH 2.jpg (27.53 KiB) Viewed 362 times

please use this email to contact me.

: q3.jpg (11.17 KiB) Viewed 362 times

This is one of the best brands of accessory gas gauges for the Model T. It's for Model T's with a round gas tank. The original acid paper box I got it in crumbed beyond saving. A stock Ford gas tank cap fits this gauge. Asking $135 plus postage. Detroit gas gauge 1.jpg Detroit gas gauge 2.jpg Please...

This set of anti rattlers is close to 100 years old in the original shelf worn box. Asking $75 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 725 times

Here's a nice used set of clamp on slide out running board carrier brackets that are Ideal for carrying auto camping gear or over size cargo. They extend out to 16 inches and are provisioned with eyelets for straps or webbing. The first photo shows them extended with my pants belt (not included) thr...

NEW PRICE $35 PLUS POSTAGE.

: q3.jpg (11.17 KiB) Viewed 549 times

OK, How about $145 (plus Postage) which is only $22 more then just the reproduction lid would cost you being offered by the vendors.

: q3.jpg (11.17 KiB) Viewed 564 times

I got this main piece for The Bull Dog pull from the drivers seat starter that I would consider parting with. http://www.mtfca.com/discus/messages/82 ... 1518364410

This is a nice small spotlight that allows enough space for a drivers side side view mirror to accompany it.. Asking $50 plus postage. Spotlite mini1.jpg spotlite mini 2.jpg spotlite mini 3.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg

The box is in good used condition. Coil switch moves freely and has a new reproduction cover face. Asking $175 plus medium flat rate postage. Coil box 1915-17 1.jpg Coil box 1915-17 2.jpg Coil box 1915-17 3.jpg Please use this email address below and NOT the personal messaging system to contact me, ...

SOLD!!!!!!!!!!!!!!!!!!!!

SOLD!!!!!!!!!!!!!!

This is a very nice original condition hard to come by California trailer license plate. Front is excellent back has lite surface rust. I recently sold my Model T era trailer so I no longer need this plate. I am asking $225, plus postage, for the plate which is what I paid for it back in the early 1...

SOLD!!!!!!!!!!!!!!!

NEW PRICE $55 plus postage

NEW PRICE $25 plus postage.

HOW ABOUT $25 PLUS SHIPPING ???

This is a brand new cast brass never used reproduction. These go for $115 from the vendors plus shipping. I am asking $95 plus shipping. License Plate Crank Holder 1.jpg License Plate Crank Holder 2.jpg License Plate Crank Holder 3.jpg License Plate Crank Holder 3.jpg Please use this email address b...

Here are two original brass era cast brake lever pawls with the proper rivet. Asking $25 for the pair plus padded envelope postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

q3.jpg

The spot light is in excellent used condition. Asking $65 plus Postage . reel 1.jpg reel 2.jpg reel 5.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg BTW: Adjusted for inflation, $7.64 in 1920 is equal to $103.88 in 2020.

I have this APCO pressed steel steering column support that will work on your wood firewall That I am asking $50 for. Let me know and I'll hold it.

STILL AVAILABLE.

I originally bought these to go with a set of Riley multi-lifts that I have no longer have. Asking $35 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 581 times

In good usable condition. Spring loaded oilier works fine. Comes with a good used rotor. Asking $35 plus postage. ford script timer1.jpg ford script timer 2.jpg Timer cast iron ford script.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg

This is a brand new ford factory early over the axle wishbone perch in mint condition. Asking $40 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 1075 times

In great condition. Asking $30 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 595 times

This is a great original period accessory for stiffening the Model T steering column in the earlier Model T's. I have included a photo of the one on my 1915 roadster and it really does a good job of taking the flex out of the steering column. This is in great shape. I am asking $50 plus small flat r...

ASKE accessory intake manifold has a electric glow wire element to help vaporize gas in cold weather. It's in good condition. Asking $75 plus postage. ASKE 1.jpg ASKE 2.jpg ASKE 3.jpg ASKE ad.jpg Please use this email address below and NOT the personal messaging system to contact me, Thanks! q3.jpg

Asking $45 for the lot with FREE SHIPPING!

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 554 times

This is the tool you use to install fastener eyelets on your soft top. It's in mint condition. New repro knock offs of this tool are sell for over $95 plus shipping. I'm asking $45 plus $6 flat rate postage for this original tool. top tool 1.jpg top tool 2.jpg Please use this email address below and...

Here you go Harry. http://www.mtfca.com/discus/messages/11 ... 1287613217

SOLD!!!!!!!!!!!!!

NEW PRICE $25 plus postage

NEW PRICE $100 Plus postage.

NEW PRICE $40 plus postage.

This is a reproduction that the late Max edmunds of the Mother Lode Model T Club had reproduced from an original 40 odd years ago. It's in brand new never used condition with a in-line see through brass sight gauge. The site glass is used in excellent condition and is visible on two sides. Asking $1...

This is a complete coil box that needs new wood and a rebuild. Switch is good and moves freely. Bottom half of the box shows some orange rind. Comes with the coil box key. Asking $60 plus medium flat rate postage. coilbox3.jpg coilbox4.jpg coilbox2.jpg Please use this email address below and NOT the...

NEW PRICE $30 plus medium flat rate postage. This also would be nice for stationary engine setup

In excellent condition in primmer. Asking $35 plus postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 806 times

Great item and well made! Thanks for making these available.

NEW PRICE $65 PLUS $8 postage.

Here's a nice used set of clamp on slide out running board carrier brackets that are Ideal for carrying auto camping gear or over size cargo. They extend out to 16 inches and are provisioned with eyelets for straps or webbing. The first photo shows them extended with my pants belt (not included) thr...

In excellent condition in original box Asking $30 plus $8 small flat rate postage.

Please use this email address below and NOT the personal messaging system to contact me, Thanks!

: q3.jpg (11.17 KiB) Viewed 522 times

One of these is new old stock and one (The black one) is in good used condition but will need the threads chased. The new old stock one has a hole for a oiler and the black one is earlier with no hole for a oiler. Asking $75 plus $8 postage. early perch set 1.jpg early perch set 2.jpg early perch 3....

This is a nice original accessory spring loaded cast iron set of brake rod anti-rattle supports that install in place of the original pressed steel factory supports. Asking $45 plus $8 small flat rate shipping. Brake rod ant rattlers 1.jpg Brake rod ant rattlers 2.jpg Please use this email address b...

Sold to Cliff!

These lock the spring perch nuts and also bond the wishbone to the axle. They are used and one set is usable as is and the other set will need new rod stock pieces bent and threaded. I have only seen these two sets in all my years of collecting Model T accessories. Asking $60 for the lot plus $8 pri...

This is one of the nicest cut out pedals I have ever come across and it's in like new condition. Asking $50 plus $8 priority mail shipping. Cast cut out pedal 1.jpg Cast cut out pedal 2.jpg Cast cut out pedal 3.jpg Please use this email address below and NOT the personal messaging system to contact ...

SOLD!!!!!!!!!!!!!!!!!!!

New price $30 plus postage.

: q3.jpg (11.17 KiB) Viewed 626 times

SOLD!!!!!!!!!!!!!!!!!!

Search found 905 matches