MTFCA Forum

Layden Butler

New Old Stock burner tip for gas headlamps still in original box. $85 including shipping to 48 states.
Contact me thru MTFCA messaging system.

Layden Butler

Very nice original arm never rusty great threads. $65 includes 48 state shipping.
Contact me thru MTFCA messaging.

Layden Butler

Which one are you looking for or do you care?

Layden Butler

Austin, I guess I wasn't clear enough, the doors that these locks are in are NOT Model T of any year or style. Same locks as used on 1911 Model T Ford Torpedo but the doors are off some other car. Like today, suppliers to Ford ( in this case bodies) purchased needed components from specialty manufac...

Layden Butler

These are a complete and proper pair of left and right door locks for all 1911 Torpedos, both styles ( early with and later without) outside door handles. Same manufacturer as were supplied to Ford in their bodies. Price is $450 the pair, packaging included, shipping at cost. They are nice fully ope...

Layden Butler

Would like to purchase a pair ( or a single would help) of running board mounting straps for a 6" diameter Prest-O-Lite tank to supply my headlamps.
Contact me thru MTFCA messaging system email.

Layden Butler

Back to the top, This is New Old Stock Winfield!

Layden Butler

Great companion to Stewart Model 26 speedometers!!

Layden Butler

These are a complete and proper pair ( left and right) of door locks for all 1911 Torpedos, both styles ( early with and later without) outside door handles. Same manufacturer as were supplied to Ford in their bodies. Price is $450 the pair, packaging included, shipping at cost. They are nice fully ...

Layden Butler

Back to the top with new lower price.

Layden Butler

More pictures.

Layden Butler

Among the rarest of Model T Ford carbs! Original untouched with new adjustment needle. $1950
Contact me thru MTFCA forum email.

Layden Butler

Look like REAR spring pieces to me!

Layden Butler

Solid brass case and rim, 2 1/2" face, Phinney-Walker keyless dash clock, no dents cracks or repairs, sets properly but only runs for a few seconds when rotated, they always should have a trip to the clock shop for cleaning and lubrication, nickel plated which could be stripped to bare brass if desi...

Layden Butler

I will take them both. Am sending an email message.

Layden Butler

Very nice original unrestored carb. Contact me thru the MTFCA messaging system email.

Layden Butler

Set of 5 original metal stem covers and rim washers, these are nickel plated brass. $85 includes 48 state domestic shipping. Contact me thru MTFCA messaging email.

Layden Butler

To post pictures in your reply....Instead of using "Quick Reply" go to and click on the box at the bottom marked "Full Editor"

I am a bit over 16 ( actually am 77) but nobody knows it all!

Layden Butler

One original burner tip for gas headlamps, appears to be NOS new old stock, $75 includes 48 state domestic shipping. Remember that these are not being made! Contact me thru MTFCA messaging email.

Layden Butler

Several sold and a few left, don't you be left out!

Layden Butler

Pair of original accessory flint ignitors for gas headlamps. Complete and functional, just twist the handle at the bottom ( which will be outside below the lamp) for sparks at the top to light the gas. Burner shown for mounting method, not included. $125 pair includes 48 state domestic shipping. Ple...

Layden Butler

I believe that all Model T gas lamps used 6" reflectors, just different focal length ( different glass curvature).
There are 5 1/2" reflectors but they did not come on Ts.

Layden Butler

He is on my NO SELL list because he has spoken for several items and then not paid for them.

Layden Butler

Pair of used but good, need cleaned for appearance sake, gas burner tips, no longer in catalogs as they are not being made. $125 pair which includes shipping to 48 states. Contact me thru MTFCA messaging email system.

Layden Butler

Have a few left of these n.o.s. ( New Old Stock) rod end swivels for earlier Model Ts. They go on the steering column end and are the correct 7/32 threads both on the nut and for the rod. When they are gone there will be no more. $65 ea. includes domestic 48 state shipping. Contact me thru MTFCA mes...

Layden Butler

Burner stand for gas headlamps,I believe this to be E&J style but may work on any Model T gas headlamps, last one I have and they are no longer being made so not available at parts suppliers. $55 which includes domestic 48 state shipping. Contact me thru MTFCA messaging email.

Layden Butler

Nice brass set of flint ignitors for gas headlamps. Complete and working. $125 includes domestic 48 state shipping. Contact me thru MTFCA messaging email.

Layden Butler

New and used odd lot.
$12 and I pay the domestic 48 state postage.
If I get no response they go in the garbage! Need to clear up the odd stuff!
Contact me thru MTFCA message system email.

Layden Butler

Unusual headlamp burner, has a chip so is not functional but makes a great display. $35 which includes domestic 48 state shipping. Respond using MTFCA email messaging.

Layden Butler

This solid brass clock has much nickel plating remaining or could be stripped to bare brass. Bracket included for surface mounting to firewall or instrument panel. Nice 2 1/2" face, beveled glass no chips dents or cracks. Winds runs and sets perfectly. Last patent date is Aug 16 1910 so this is a ve...

Layden Butler

Short "Torpedo" boards were use on the late 1910 and the 1911 Torpedos.
1912 Torpedos used the standard long boards along with the rest of the body styles.

Layden Butler

Spoken for!!

Layden Butler

Can supply this pair of originals. Please reply using MTFCA email. These have been sold and delivered!

Layden Butler

Restored as pictured, only needs a large cotterpin! $35 which includes 48 state domestic shipping. Contact me thru the MTFCA email messaging.

Layden Butler

Pretty rare for us here in the USA to see a right hand drive throttle lever!

Layden Butler

Clock is spoken for.

Layden Butler

All brass Phinney-Walker keyless ( rim wind and rim set) clock, winds runs and sets properly, no dents cracks or chips, 2 1/2" diameter face. Please respond using MTFCA messaging system.

Layden Butler

Pair of front hubs and matching hubcaps for Budd wire wheels 30 x 3 1/2 size. Matched set left and right, good threads and caps. Off an Overland and readily converted to Model T Ford axles either front or rear. $325 for 4 pieces. Please respond thru MTFCA message system.

Layden Butler

Gauge pictures:

Layden Butler

Instrument panel mounting with proper large nut, no dents or repairs, works fine, $150 including 48 state domestic shipping. Contact me thru MTFCA messaging. Also new in box 2 1/2" face gauge, 5 PSI, $25 free shipping with the pump.

Layden Butler

Pair of used original gas headlamp burners in good shape ready to use. Remember that these are NOT being reproduced! Please reply by MTFCA messaging.

Layden Butler

New Old Stock Winfield carburetor adapter to fit Winfield Model S or SR size B, 4 bolt pattern is 1 5/8" C/C and the 2 bolt pattern is 3 1/8" C/C. This is Winfield part number S-99B. It is not reproduction nor nice used but actually New Old Stock never used. Winfield catalog says application is Buic...

Layden Butler

Reliance brand porcelain 3 1/2" face, 5" overall mounting flange,3600 RPM markings, needle moves when spun by hand, nickel plated case that could be stripped to bare brass, marked on back 1/2 to 1 so is calibrated to be driven at camshaft speed. $185 which includes domestic 48 state shipping. Contac...

Layden Butler

Believe this to be a Spencer brand wheel. Excellent condition complete working and ready to use. Tilts, locks and has original keys. SOLD Contact me thru MTFCA messaging.

Layden Butler

For everyones knowledge so we a talking about the same pieces:

Layden Butler

Phinney-Walker brass clock 2 3/4" OD that is the matching accessory to Stewart models 11 and 26 speedometer heads, see the 3 threaded holes in the back. This particular clock was factory modified with a rim added for panel mounting, the ring can be easily removed for bracket mounting as used on Mode...

Layden Butler

Original stand in nice unrestored condition. SOLD

Layden Butler

Don't the taper leaf rear springs and the cut leaf rear springs have a different arch shape so that none of the leaves interchange?

Layden Butler

How about a picture so we can see if it is a repro or not?

Layden Butler

All brass clock runs when shaken, no cracks or dents. No dents or cracks,

Layden Butler

This regulator fits all 6" diameter tanks. $95 including 48 state shipping.

Layden Butler

Spoken for!!

Layden Butler

To the top!!

Layden Butler

This is a modern replacement for the 2 1/2 to I ratio right handed swivel for Model T Fords using Stewart swivel #1913. This will be the last swivel you ever have to deal with, it will outlast You! SOLD

Layden Butler

Sorry Manny but this book sold to the first responder.

Layden Butler

Unmarked barrel valve accessory for T SOLD
Griffin accessory $100
48 state shipping included.

Layden Butler

Back to the top!

Layden Butler

Group of 6 Champion spark plugs as a lot. $50 including 48 state shipping.

Layden Butler

Hand air pump usually seen on speedsters to pressurize the gas tank. Nickel plated solid brass, only needs a new seal, rare stand off style with 4 feet to attach to outside of body or bucket seat. $225, 48 state shipping $10.

Layden Butler

Adaptor to put Winfield Model S or SR carburetor size BB on to a 1 1/4" S.A.E. manifold ( 2 bolts 2 11/16" c/c). New Old Stock never used Winfield piece part number S-64BB1. It has a tap for vacuum line ( does not have to be used) to windshield wiper or distributer advance. $85, 48 state shipping $10.

Layden Butler

Late Model T speedometer head,1926-7 Model 490, $125, 48 state shipping $10.

Layden Butler

Very good Stewart #11077 road gear for 30 x 3 1/2 tire size. Never modified or repaired and none needed. Just old paint no rust. $50, 48 state shipping $10.

Layden Butler

Original burner stand for E&J gas headlamp, SOLD

Layden Butler

For 4" diameter MC tank $99. Shipping to 48 states $12.

Layden Butler

3600 RPM porcelain face 3 1/2" diameter, mounting flange is 5" OD, solid brass construction nickel plated, needle moves when input is turned. Asking $150, 48 state shipping $15.

Layden Butler

I will take them. Thanks

Layden Butler

Anyone else needs one I can also supply.
Good used $35, new old stock $50

Layden Butler

More pictures.

Layden Butler

This is an uncommon supplement to Dyke's Encyclopedia, 228 pages of design operation tuning and problem diagnosis including Stromberg Schebler Stewart Ford Winfield and more. Very well done just like the Encyclopedia it is packed with useful information. If you have a Dykes Encyclopedia then you rea...

Layden Butler

Very nice solid brass clock, no cracks n chips, runs when shaken probably needs a trip to the shop, $165, 48 state shipping $10.

Layden Butler

Very nice hand air pump for speedster gas tank. Complete with panel mounting threaded ring, needs a new leather seal.
$185, 48 state shipping $10.

Layden Butler

More pictures.

Layden Butler

Dyke's Encyclopedia from after the Model T era but still has the famous Model T Ford section, 1242+ pages of great general automotive reading ( it is 2 1/2" thick), aircraft, trucks, tractors, motorcycles, carburetors, general engineering, magnetos. and on and on seemingly forever! Nicely indexed fo...

Layden Butler

New Old Stock bolts for ends of the tie rod, authentic supplied by FORD 1911 thru 1916 with threaded hole on top for brass oiler, for the purist! $99 pair, domestic postage included. These are NOT reproduction but are New Old Stock. I have one single with original brass oiler for $50 including shipp...

Layden Butler

Holley carburetor for 1907, asking $1800.

Layden Butler

More pictures.

Layden Butler

Dyke's Encyclopedia from after the Model T era but still has the famous Model T Ford section, 1242+ pages of great general automotive reading ( it is 2 1/2" thick), aircraft, trucks, tractors, motorcycles, carburetors, general engineering, magnetos. and on and on seemingly forever! Nicely indexed fo...

Layden Butler

Nice original wrench never any repair, 2" opening for Model T size pin drive wheels.

Layden Butler

This is the nut with padlock holes that secures the spare rim to the carrier on 1926 and 1927 cars. Ford part #2876, NEW Old Stock but have some dirt and "shelf wear"!

Layden Butler

Set of 4 very nice Michelin valve stem covers, solid brass nickel plated, I don't know if they are authentic for a Model T but they sure are pretty!
$135 set includes 48 state shipping.

Layden Butler

I believe 6 of these predate the brass top plugs and are appropriate for early Model Ts, 1/2" pipe threads. $50 the lot of 8 pieces, 48 state shipping $10.

Layden Butler

Believed to be a Spencer brand flip fatman and locking steering wheel, no repairs and none needed, fit for installation, complete with keys. Asking $550

Layden Butler

John,
That is the reduced price, I edited the original posting to show the new price.
You may make an offer if you choose to do so.

Layden Butler

Bosch magneto control switch, grounds and kills a magneto when in OFF position or key is removed, complete and New Old Stock, use with or without the wiring sleeve cover, $235 including 48 state shipping. Also offering a lower priced alternative, also New Old Stock ON/Off switch for magnetos, see la...

Layden Butler

Set of original Schrader tire tube stem covers with rim nuts, made of brass and nickel plated could be stripped to bare brass. $65 including 48 state shipping.

Layden Butler

4 matching cover pieces in nice shape $45 including domestic shipping.

Layden Butler

Prest-O-Lite regulator with needle valve flow control and length of red old time rubber hose with barb and clamp. Fits all 6" diameter tanks. $135 plus $20 domestic shipping.

Layden Butler

Original set of covers and rim nuts for 1926 and 1927 Model Ts, nickel plated made of brass, $99 including 48 state shipping.

Layden Butler

Original Hyatt type spiral wound rear axle bearings, .002" or less wear and have tight cages, nice bearings ready to use after your final cleaning. No pitting, no rust, never any other than Satisfied Happy Model T owners. 3 are pictured but I can supply a set or more. Price is $75 per bearing, domes...

Layden Butler

Make an offer!

Layden Butler

Any interest out there?

Layden Butler

Back to the top.

Layden Butler

Back to the top.

Layden Butler

Reduced price!

Layden Butler

Looks like an Apollo or perhaps a Parkin.

Layden Butler

More pictures!

Layden Butler

Rare early Dyke's Encyclopedia from the brass Model T era, 3rd Edition 1914, famous for 557+ pages of great general automotive reading ( it is 2" thick), aircraft, trucks, tractors, motorcycles, carburetors, general engineering, magnetos. and on and on seemingly forever! Nicely indexed for easy info...

Layden Butler

Sliding Neville fatman steering wheel made specifically for Model T Ford, not a conversion from some other make car or universal application, this very rare style is Model T Ford only. This unusual center mount allows the wheel rim to be in the stock T location, many other Nevilles have the wooden r...

Layden Butler

Additional pictures.

Layden Butler

Reliance brand speed indicator tachometer could be used for early race car speedster or others, 3 1/2" face, nickel plated solid brass construction ( could be stripped to bare brass), porcelain face.
Hall-Scott was an era manufacturer of aircraft and racing engines.

Search found 459 matches