MTFCA Forum

Layden Butler

New Old Stock bolts for ends of the tie rod, authentic supplied by FORD 1911 thru 1916 with threaded hole on top for brass oiler, for the purist! $125 pair, domestic postage $10. These are NOT reproduction but are New Old Stock. Threaded on top for brass oilers. Oiler example not included.

Layden Butler

Brass case with bevel glass, 3600 RPM, 3" diameter face. $265 including domestic postage.

Layden Butler

2 bare 1926-27 engine blocks, pick them up here in Northern California. This is a one time offer, they go out in next scrap metal collection.
SPOKEN FOR, NO LONGER AVAILABLE.

Layden Butler

Bracket needed to mount my Stewart speedometer head to a wooden firewall. Any of these pictured would work, brass or iron, or any other style. Thanks for looking.

Layden Butler

This is the original gear used on Model T Fords 1911 and 1912.

Layden Butler

Cast gear with block letter Stewart used in 1911, proper 60 teeth and 8 pitch, good teeth, does need straightening ( does not lay flat on the table). $95, domestic postage $10.

Layden Butler

All brass Lunkenheimer brand hand pump, works great. $65 including domestic postage.

Layden Butler

Layden Butler wrote: ↑
Sun Mar 24, 2024 6:28 pm
Good pair of bearings, tight cages, no pits spalling or other troubles, .003 wear so plenty of life left,

Layden Butler

Original hand air pump from the teens and 1920s, solid brass, plated which could be stripped off. $225, including domestic postage .

Layden Butler

Only 2 pair left!!! No more when these are gone.

Layden Butler

Good pair of bearings, tight cages, no pits spalling or other troubles, .003 wear so plenty of life left,

Layden Butler

Pair of used and still runnable burner tips for gas headlamps, Crescent brand 1/2 cubic feet size ( proper size for Model T Ford). $99 pair, domestic postage $10.

Layden Butler

More pictures!

Layden Butler

Exceptionally nice Stewart Model C speedometer head for 1913 Model T, 1913 dated on the face, unmolested condition needing only cleaned and lube, original black paint. $375, domestic shipping $25.

Layden Butler

Stewart Model 26 speedometer and matching clock setup to mount on a wooden firewall. $750, 48 state postage $18.

Layden Butler

1911 Torpedo and Open Runabout only had a gas tank but were commonly modified.
1912 Torpedo were standard equipment with tank and toolbox.

Layden Butler

Hand air pump to pressurize a gas tank, originally intended for a wooden instrument panel, works

Layden Butler

Unknown application but the float mechanism looks like 1909-1912 era. $40, 48 state shipping $10.

Layden Butler

Made to mount on a vertical wooden dash as on a brass era Model T, takes off and runs when wound but should go off to the shop for cleaning and lube.
Nickel plated brass, rim wind and rim set. Will need a mounting bracket made for it, the bracket is hidden by the clock housing when mounted.

Layden Butler

Just out of many years storage, will need an overhaul. Complete less choke mechanism, bolt holes have been modified. $475, 48 state shipping $20.

Layden Butler

Angle mount all brass clock for vertical wooden dash mount as on brass era Model Ts. Runs when shaken but will need cleaning and lube. Also will need a mounting bracket fabricated, bracket is hidden when clock is installed.

Layden Butler

I believe the "dip" at the front is for a 2 piece dash, that would be early 1912s. Those "front doors" that are flat along the whole top surface are for single piece dash boards, later and most of 1912 production.

Layden Butler

Just use pipe thread sealant (NOT teflon tape) and screw it in until it is aligned to where you want it but will not go another full turn around!
Always worked for me for the past half century.

Layden Butler

Who wants to build a real go fast speedster!!!

Layden Butler

Fun accessory, no need to open the lamp door!

Layden Butler

Believe this pair of 1920 patented brackets were intended to mount accessory shock absorbers, bumpers or similar to the frame. They clamp on so no holes to drill and can be mounted just about anywhere along the frame rails. Perfect condition, may be NOS.

Layden Butler

Original paint never bent no rust.

Layden Butler

Can anyone ID these brackets? They appear to clamp to a frame. Thanks

Layden Butler

Phinney-Walker Keyless clock rim wind, runs when rotated, surely needs cleaned and lubricated, 2 1/2" diameter

Layden Butler

Holley all brass 1912 carburetor $185.

Layden Butler

Now $40 including 48 state delivery!

Layden Butler

Dayton 6 pin drive accessory wire wheel center, nice one, $125.

Layden Butler

Still have a few available. When they are gone there will be no more! Not being reproduced and probably never will be.
No disappointed buyers!

Layden Butler

Original key $75 including domestic 48 state postage.

Layden Butler

Rear axle roller bearings for Model T cars part # 2508, these are for both inner and outer and left and right side, lightly used very good condition and measure .002" wear or less on the rollers, no loose cages, limited number available, most have no makers markings but some say Hyatt and a few Ford...

Layden Butler

Magneto control switch, it makes in the OFF position to ground and kill most makes of magnetos including Bosch. New Old Stock perfect condition ready to use. $135 including 48 state postage.

Layden Butler

Only a couple left, get them now or never!

Layden Butler

Set of 4 matching tire tube stem dust covers with rim nuts, can be stripped to bare brass, $50 including 48 state shipping.

Layden Butler

Ross was ( and descendent companies still are) a quality major manufacturer of steering gears. They used a cam and lever design that gives accurate steering without the slop and front wheel feedback to the steering wheel of the Model T planetary steering gears. This unit is not originally for a Mode...

Layden Butler

Complete working pair of flint striker ignitors for carbide gas headlamps, great functional accessory. $125 pair including 48 state shipping. Pictures show one attached to a headlamp burner, burner is not included but available.

Layden Butler

Ross brand worm gear steering readily adapted to Model T Fords, asking $350. Can package for 48 state shipping.

Layden Butler

$99 special while it lasts!

Layden Butler

This special nut has holes in the arms for a padlock to secure the spare rim on the carrier, for 1926-1927 Ford part number 2876. $23 each including 48 state shipping. New Old Stock originals while they last!

Layden Butler

Unknown to me what this fits, $75 includes 48 state shipping.

Layden Butler

Set of 4 matching tire tube stem dust covers with rim nuts, can be stripped to bare brass,

Layden Butler

Shifter for the axle of a car Ruckstell, has at sometime had a successful repair, ready to use. $115 which includes 48 state shipping.

Layden Butler

Winfield carburetor model SR, has been sitting too long so is now stuck, missing choke butterfly. $375, domestic shipping $20.

Layden Butler

Nice pair with catches $345 including 48 state domestic postage.

Layden Butler

Fun piece for your Model T! Tell on sight how steep the grade is. Made of cast aluminum so could be stripped of the black paint if desired. Works great. $65 including domestic postage.

Layden Butler

ON OFF switch for American Bosch magneto.

Layden Butler

These are parts for a hand pull starter system, I believe.

Layden Butler

This regulator fits the 6" diameter tanks of all lengths. Yes it has flow control needle valve to adjust headlamp flame and hose barb. Included is a length of old time red rubber hose.

Layden Butler

Original Green Engineering front plate with oil pump, included is reproduction casting for side drive water pump and magneto. Asking $950 for the pair.

Layden Butler

More pictures.

Layden Butler

All brass spotlamp complete with swivel for firewall mounting on early speedster, 7" diameter lamp, assembly is 14" tall. Nice glass reflector, no cracks or dents, wooden handle on rear. $435, 48 state shipping $40.

Layden Butler

Complete working pair of flint striker ignitors for carbide gas headlamps, great functional accessory. First picture shows one attached to a headlamp burner, burner not included.

Layden Butler

Gauge pictures
2 1/2" diameter

Layden Butler

1920's hand air pump to pressurize a gas tank, works good and is complete with mounting nut for instrument panel mounting, 10" long overall, $145 which includes 48 state shipping. Can also supply a new 5 pound gauge $25.

Layden Butler

Pair of decent original Pasco wire wheel hubcaps, nice threads and minimal wrench marks.

Layden Butler

All brass Phinney-Walker angle mount dash clock for a vertical wooden dash, needs a glass for the face otherwise complete with mounting bracket, takes off and runs when wound. $135 including postage to 48 states.

Layden Butler

Complete Bosch magneto drive for generator and non-generator engines, this set is NOS New Old Stock not gently used or rebuilt but never bolted to an engine, no bolt circle marks around any of the holes, it has been sitting for about a century so will need a bit of limbering up! Standard SAE magneto...

Layden Butler

New great price!

Layden Butler

To the top!

Layden Butler

Obviously the chassis changed but I took the initial statement to be that the bodies were somehow different???

Layden Butler

For us uninformed. Just how is a 1917 different than an other year?

Layden Butler

More pictures.

Layden Butler

Pump to pressurize the gas tank, included is a new modern 5 pound gauge. $145 domestic shipping included.

Layden Butler

Allan.
Left and right side certainly do apply. Drivers and passenger side is not as simple as it may seem!!

Layden Butler

Mark,
Actually there are 2 types of Neville steering wheels specifically for Model T.
Here is the other.

Layden Butler

Original with nice threads, $99 including domestic shipping.

Layden Butler

If the taper is good, a new keyway could be cut on the other side from the bad one. BUT not a real good idea because it will weaken the axle.
Replace it! There are lots of good used axles out there.

Layden Butler

Bruce,
Have not seen payment for this and now your email does not work!
Contact me.
Layden

Layden Butler

More pictures.

Layden Butler

Rare early book with red cover, 1912, 499 pages of excellent early car and aircraft info, too early to have a Model T section, asking $135, domestic postage $10.

Layden Butler

I found what I needed! No leads on another however.

Layden Butler

Nice 1913 horn with round mounting bracket, $175, domestic postage $20.

Layden Butler

Fun piece for your Model T! Tell on sight how steep the grade is. Made of cast aluminum so could be stripped of the black paint if desired. Works great. $95 including domestic postage.

Layden Butler

Holley 4550 carburetor for 1912, asking $185, domestic postage $20.

Layden Butler

See pictures below. These nuts are for the correct early .482 " stems and go onto the stem after it is inserted thru a wood felloe wheel and before the dust cover. Note they are machined of brass stock not stamped. A bridge washer nut is shown next to one of these 4 larger nuts, note also that they ...

Layden Butler

$27 for a holiday special!!!

Layden Butler

$75 will get them to a new home?

Layden Butler

Happy buyers so far! I would like to clear out the remaining so 10% off!

Layden Butler

Anyone need these?

Layden Butler

All Model T Fords 1909 thru 1921 used one of these on the steering column end of the spark rod ( that goes to the timer). Am offering a used one at $25 including domestic postage.

Layden Butler

Gauge pictures.

Layden Butler

Hand air pump with T handle for pressurizing a gasoline tank, complete with large nut for instrument panel mounting, works great and has built in check valve, included is your choice of a working old time 10 pound pressure gauge or a new 5 pound gauge, $199, domestic shipping $15.

Layden Butler

USED rear car axle spiral wound roller bearings part # 2508, these are for both inner and outer and left and right side, lightly used very good condition and measure .002" wear or less on the rollers, no loose cages, limited number available, most have no makers markings but some say Hyatt and a few...

Layden Butler

Winfield carburetor linkage swivels, very limited number of New Old Stock swivels available at $80 pair including domestic postage.

Layden Butler

1914 only
Right rear of touring cars and left front of Canadian bodies with left front door

Layden Butler

Set of Schrader brass era tire tube stem covers with proper solid not stamped rim nuts for brass era Model T Fords, Original nickel plating over solid brass that you can strip to bare brass if you prefer!

Layden Butler

Complete set of original Schrader tire tube stem covers with nuts, $55 including domestic postage.

Layden Butler

These lifters are the same dimensions as stock Model T Ford engines but have socket face for pushrods when installing an accessory overhead valve cylinder head, set of 8 new never used, $60 includes domestic postage. Only have the one set available.

Layden Butler

Wire wheel center for 54 spoke pin drive wheel $165
Hubcap wrench $150
Both very good original parts. Domestic shipping included.

Layden Butler

Early front motor mount with cap, very light rust no pits. $35 includes domestic postage.

Layden Butler

Pair of accessory gas headlamp ignitors, burner shown for clarity, not included. domestic postage included.

Layden Butler

Early front motor mount with cap, just dirty with very light rust. includes domestic postage.

Layden Butler

Front mount as shown, dirty and "as is"

Layden Butler

Pair of original era accessory outside oil line fittings, you just add the tubing. $45 pair, domestic postage included.

Layden Butler

Straight thru drive and mounting bracket, road gear for hub mounting, cable housing ( needs simple repair),, domestic postage included. Happy to answer questions and send more pictures.

Layden Butler

Pair of accessory gas headlamp ignitors, burner shown for clarity, not included. Asking , domestic postage included.

Search found 1508 matches