Search found 279 matches

by It's Bill
Sat Nov 19, 2022 5:01 pm
Forum: Classifieds - Vehicles
Topic: FS 1917 T Coupelet - Price Reduced - Updated
Replies: 60
Views: 17985

Re: FS 1917 T Coupelet

Incredible. A coupelet is offered for sale, and all that is discussed is leaking oil. Give me a break. Start a your own new thread about sealing up a T. Let's have a discussion about coupelets! Just sayin'. Bill
by It's Bill
Wed Aug 03, 2022 7:08 am
Forum: Classifieds - Vehicles
Topic: 1911 Touring for sale
Replies: 1
Views: 2703

Re: 1911 Touring for sale

The car sold yesterday and is headed for Michigan. Thank you MTFCA! Cheers, Bill
by It's Bill
Fri Jul 29, 2022 1:25 pm
Forum: Classifieds - Vehicles
Topic: 1911 Touring for sale
Replies: 1
Views: 2703

1911 Touring for sale

Hello, I am selling my 1911 touring car. It has been totally rebuilt - original engine, transmission, and mag rebuilt by Joe Bell with Dubats crank and ring gear flywheel, Russ Potter straight through carb, Ron Petersen coils, rebuilt Ruckstell with all new internal castings, gears, bearings, shafts...
by It's Bill
Sun Jun 05, 2022 5:41 pm
Forum: General Discussion Forum
Topic: Rear wheel REALLY stuck
Replies: 31
Views: 3723

Re: Rear wheel REALLY stuck

Steve, did you mess up the axle threads or mushroom the axle end in your struggle? Bill
by It's Bill
Tue May 17, 2022 1:28 pm
Forum: General Discussion Forum
Topic: My Model T Milestone
Replies: 15
Views: 2775

Re: My Model T Milestone

Ron's coils take a lickin' and keep on tickin' ! Top notch work, many thanks, Bill
by It's Bill
Mon Apr 04, 2022 7:41 am
Forum: General Discussion Forum
Topic: Young First Time Driver Tips?
Replies: 32
Views: 3219

Re: Young First Time Driver Tips?

If the ratchet and/or pawl that holds the emergency brake handle in the neutral position are worn, the handle can pop forward which puts you in high gear. If you have set the throttle to fast for starting the engine or getting the car moving, this can be a very, very, VERY bad thing. Make sure these...
by It's Bill
Mon Mar 14, 2022 5:49 pm
Forum: General Discussion Forum
Topic: Step Plates
Replies: 48
Views: 4436

Re: Step Plates

Personally, I think step plates are the greatest invention since heated car seats. Maybe heated toilet seats. Maybe remote TV controls. Maybe tablets so I can post dreck like this. :) Bill
by It's Bill
Sat Jan 08, 2022 8:15 pm
Forum: General Discussion Forum
Topic: Randall Anderson
Replies: 65
Views: 9070

Re: Randall Anderson

My deepest condolences to his family. RV was a big help to me, and I was looking forward to working with him in the future. R.I.P. RV.
by It's Bill
Thu Dec 09, 2021 5:12 pm
Forum: General Discussion Forum
Topic: Has anyone used this shop to rebuild a Model T motor
Replies: 3
Views: 1509

Re: Has anyone used this shop to rebuild a Model T motor

Joe Bell does a great job. Cheers Bill
by It's Bill
Mon Nov 22, 2021 5:08 pm
Forum: General Discussion Forum
Topic: Fine Line Between Hoarding and Collecting
Replies: 20
Views: 3260

Re: Fine Line Between Hoarding and Collecting

Model trains? Now you're talkin'! What scale and guage? Sorry, off topic. Bill
by It's Bill
Sun Nov 21, 2021 9:25 pm
Forum: Classifieds - Parts
Topic: WTB - Oilstone Powder
Replies: 14
Views: 2484

Re: WTB - Oilstone Powder

Scott, in order to get from one place to another place, you first have to cover half the distance. Then you must cover half the remaining distance, then half the remaining distance, and so forth over and over. The net result is you never can quite get anywhere. That answer your question? :) Cheers, ...
by It's Bill
Sun Nov 21, 2021 5:02 pm
Forum: General Discussion Forum
Topic: Replacing the Handbrake Pawl
Replies: 20
Views: 2884

Re: Replacing the Handbrake Pawl

Get it done! I had a collision recently because the handbrake lever slipped forward and the car went into high gear. This is dangerous, and a must do repair! No joke, Bill
by It's Bill
Sun Nov 21, 2021 4:59 pm
Forum: General Discussion Forum
Topic: Fine Line Between Hoarding and Collecting
Replies: 20
Views: 3260

Re: Fine Line Between Hoarding and Collecting

Well, I'm depressed now...
by It's Bill
Sun Nov 21, 2021 4:53 pm
Forum: Classifieds - Parts
Topic: WTB - Oilstone Powder
Replies: 14
Views: 2484

Re: WTB - Oilstone Powder

OK, in my quest for infinite knowledge, what is oil stone powder, and what do you do with it? Perplexed, Bill
by It's Bill
Sun Nov 14, 2021 7:49 am
Forum: General Discussion Forum
Topic: Setting the hogs head
Replies: 16
Views: 2755

Re: Setting the hogs head

I used Permatex #2 on my car with good results. It remains pliable forever and will not set up. You can work it into the felt and it seals everything very well with no leaks. The best part is disassembly is easy when the time comes, whereas the RTV products glue everything together to the point of b...
by It's Bill
Sat Nov 06, 2021 4:51 pm
Forum: General Discussion Forum
Topic: Longest Distance You Have Driven In Low Gear.
Replies: 18
Views: 2616

Re: Longest Distance You Have Driven In Low Gear.

You guys are my heroes. Cheers, Bill
by It's Bill
Thu Oct 21, 2021 6:51 am
Forum: General Discussion Forum
Topic: What has more market value?
Replies: 10
Views: 2252

Re: What has more market value?

How do you make a small fortune in the model t hobby? Start with a large fortune... ;) Cheers, Bill
by It's Bill
Sat Sep 25, 2021 11:13 am
Forum: General Discussion Forum
Topic: 1911 Steering Problem. Dangerous???
Replies: 17
Views: 2505

Re: 1911 Steering Problem. Dangerous???

Here is the latest per the excellent information you good folks provided: The pitman arm is part # 929, and hangs straight down when the wheels are dead ahead. The tie rod is the correct one with the ball integral to the rod end. The drag link looks original with brazed and pinned ends, and measures...
by It's Bill
Fri Sep 24, 2021 7:50 pm
Forum: General Discussion Forum
Topic: 1911 Steering Problem. Dangerous???
Replies: 17
Views: 2505

Re: 1911 Steering Problem. Dangerous???

Many, many thanks! I will investigate all this and update the thread. At this point I'm pretty sure the tie rod is correct. I will provide a measurement on the drag link and part number on the pitman arm. I remember it being straight down when the wheels are dead ahead. Cheers Bill
by It's Bill
Fri Sep 24, 2021 3:56 pm
Forum: General Discussion Forum
Topic: 1911 Steering Problem. Dangerous???
Replies: 17
Views: 2505

Re: 1911 Steering Problem. Dangerous???

I should mention that the arm stops very soon after 9:00. Say, a couple of degerees - just enough to let you know it has gone over center. Thanks, Bill
by It's Bill
Fri Sep 24, 2021 3:53 pm
Forum: General Discussion Forum
Topic: 1911 Steering Problem. Dangerous???
Replies: 17
Views: 2505

1911 Steering Problem. Dangerous???

I was just pushing my '11 back and forth to move it into alignment to exit the shop door. I found that when I cut the wheel to the left hard enough, the pitman arm will go over center. That is to say, it will go from 6 o'clock through 7, 8, 9 and keep on going towards 12:00 until the crankcase pan s...
by It's Bill
Fri Sep 24, 2021 8:04 am
Forum: General Discussion Forum
Topic: How to remove a stuck rear wheel?
Replies: 49
Views: 5179

Re: How to remove a stuck rear wheel?

Thanks for the reply Dick. I wondered about that - if the hub would shrink on tighter. Perhaps heating the entire circumference of the hub followed by whacking an axle knocker would work? But how hot is hot enough?

I'm going to go slow here... 8-)
by It's Bill
Wed Sep 22, 2021 10:41 pm
Forum: General Discussion Forum
Topic: How to remove a stuck rear wheel?
Replies: 49
Views: 5179

Re: How to remove a stuck rear wheel?

What do you guys think of using a small tip torch to heat the hub in small areas, then letting it cool? Would that help break the grip, or just cause more problems?
by It's Bill
Mon Sep 20, 2021 9:25 pm
Forum: General Discussion Forum
Topic: How to remove a stuck rear wheel?
Replies: 49
Views: 5179

Re: How to remove a stuck rear wheel?

None of these techniques have worked for me. I even tried a large air hammer with the knocker. I did not use a torch on the hubs yet for fear of ruining the axle seals. Not sure if it would help anyway. I should mention that the hubs, axles, and keys are all new from Lang and were absolutely perfect...
by It's Bill
Fri Sep 17, 2021 2:10 pm
Forum: General Discussion Forum
Topic: Loose Horn Bracket
Replies: 0
Views: 663

Loose Horn Bracket

I have a brass Nonpareil horn on my car. The rivets that hold the bracket to the horn itself are loose enought to allow the horn to ratlle up and down while driving. Is there a good way to tighten these up without unsoldering the horn and taking it apart? Suggestions appreciated, thanks, Bill
by It's Bill
Tue Sep 07, 2021 7:34 am
Forum: General Discussion Forum
Topic: Brass horn issues...
Replies: 4
Views: 1589

Re: Brass horn issues...

Tim Wrenn can give you some tips. I tear rags into strips, apply polish, and then saw it back and forth to get to the tight spots. Is that a torpedo horn? If it is, take good care of it! Cheers, Bill
by It's Bill
Fri Sep 03, 2021 6:16 am
Forum: General Discussion Forum
Topic: World War 1 Model Ts
Replies: 57
Views: 8198

Re: World War 1 Model Ts

Impressive reply Mr. Brown. When so much media is given over to the destruction of our culture, it's easy to forget that there are many thoughtful younger folks ready to step into our shoes. This forum does a great job of filling in my education about American history in a fun and personal way, and ...
by It's Bill
Mon Aug 30, 2021 7:39 am
Forum: General Discussion Forum
Topic: FIRST TIME FOR ME..
Replies: 19
Views: 2976

Re: FIRST TIME FOR ME..

I must be getting senile, I can't make heads or tails of this. Guess I'll have to head out your way and check it out. Good video! Cheers, Bill
by It's Bill
Tue Aug 17, 2021 9:07 am
Forum: General Discussion Forum
Topic: BIG BOY 4014 STEAM TOUR 2021 Model T Photo Op
Replies: 30
Views: 3584

Re: BIG BOY 4014 STEAM TOUR 2021 Model T Photo Op

Serious motive power from a time when men were men and women were glad of it! :D
by It's Bill
Tue Aug 17, 2021 9:02 am
Forum: General Discussion Forum
Topic: Additional Pics: Rock Solid 1911 Steering Column Rivets
Replies: 13
Views: 2537

Re: Rock Solid 1911 Steering Column Rivets

I, too, would like to see a few photos of the offset rivet former in use. Showing the air hammer in position if you can, please. After-the-fact photos would be fine. Fan hubs are another spot where rivets are not directly accessible, and I'm really curious about how you got the hammer driving force ...
by It's Bill
Thu Aug 12, 2021 7:07 am
Forum: General Discussion Forum
Topic: Anatomy of a Model T Coil Spark
Replies: 4
Views: 1316

Re: Anatomy of a Model T Coil Spark

I can testify from personal experience after having been zapped by one of these things, microseconds do indeed matter! :) Bill
by It's Bill
Fri Aug 06, 2021 6:40 am
Forum: General Discussion Forum
Topic: A Boat Load
Replies: 28
Views: 3525

Re: A Boat Load

Human ingenuity is infinite! :)
by It's Bill
Sun Aug 01, 2021 7:49 am
Forum: General Discussion Forum
Topic: Tom Zimmer was right. "How do I remove clear coat from brass?"
Replies: 18
Views: 3197

Re: Tom Zimmer was right. "How do I remove clear coat from brass?"

Brake fluid eats paint. Has anybody tried it? Cheers, Bill
by It's Bill
Thu Jul 29, 2021 7:28 am
Forum: General Discussion Forum
Topic: Ball Bearing Fan Hub & New Fan for '19?
Replies: 47
Views: 3905

Re: Ball Bearing Fan Hub & New Fan for '19?

Sometimes my excessive play with my T is measured in decibels, too! ;)
by It's Bill
Tue Jul 20, 2021 6:44 am
Forum: General Discussion Forum
Topic: Remember You are Not as Young as You Think...,
Replies: 27
Views: 4299

Re: Remember You are Not as Young as You Think...,

Recently in the heat, I thought I was having a major heart problem coming on strong. The doc discovered I was low on sodium. When I worked in the steel mill, we all took salt tablets to replenish sodium lost through perspiration. The mill had boxes of them scattered all through the production bays. ...
by It's Bill
Fri Jul 16, 2021 7:16 am
Forum: General Discussion Forum
Topic: Playin in the shop today...
Replies: 119
Views: 24852

Re: Playin in the shop today...

Holy cow! I hope you are planning on spending some time teaching an apprentice or two to pass this knowledge along. Just the practical logic of how you hold parts and the sequence of machining operations would have Leonardo patting you on the back! Cheers, Bill
by It's Bill
Fri Jul 16, 2021 7:06 am
Forum: General Discussion Forum
Topic: 1927 Touring, tranny is loud
Replies: 60
Views: 5891

Re: 1927 Touring, tranny is loud

Scott, wish I had read your reply a couple of years ago. I am still figuring this stuff out! Cheers, Bill
by It's Bill
Thu Jul 15, 2021 9:28 am
Forum: Classifieds - Parts
Topic: Brake quadrants fs
Replies: 2
Views: 959

Re: Brake quadrants fs

Mike, I will buy the top quadrant, the 09-25 piece. I'll email you for payment and shipping details. Cheers, Bill
by It's Bill
Tue Jun 29, 2021 4:49 pm
Forum: General Discussion Forum
Topic: First Stromberg OF needle fresh off of assembly jig - New Pix, New Needle
Replies: 23
Views: 3312

Re: First Stromberg OF needle fresh off of assembly jig

I would be interested in these parts. My car came with this carb, and I am planning to rebuild it when the snow flies. Running a straight through NH now. Please keep us updated Scott. Cheers, Bill
by It's Bill
Thu Jun 24, 2021 7:15 am
Forum: General Discussion Forum
Topic: It doesn't get more Canadian than this
Replies: 15
Views: 2336

Re: It doesn't get more Canadian than this

Better than a curling stone... ;)
by It's Bill
Sat Jun 19, 2021 8:52 am
Forum: General Discussion Forum
Topic: VEHICLES FOR SALE BY THE MTFCA!
Replies: 59
Views: 11864

Re: VEHICLES FOR SALE BY THE MTFCA!

Auction results?
by It's Bill
Mon Jun 14, 2021 5:31 pm
Forum: General Discussion Forum
Topic: Ruckstell axle
Replies: 9
Views: 2066

Re: Ruckstell axle

Joe Bell tells me he down shifts into Rux low entering a corner then shifts to Rux high upon exit. Makes sense, I have yet to try it. Works with a hotrod Mustang, I can tell you. Joe must be one of them thar high performance, maxed out, go for broke model T guys! Go for it, Bill
by It's Bill
Fri Jun 11, 2021 8:07 pm
Forum: General Discussion Forum
Topic: T with the most Leg room for Tall drivers
Replies: 26
Views: 3897

Re: T with the most Leg room for Tall drivers

I would think you could build a speedster to fit. Would that work, or do you want an original car? Bill
by It's Bill
Fri Jun 11, 2021 1:18 pm
Forum: General Discussion Forum
Topic: Just starting
Replies: 11
Views: 2542

Re: Just starting

There is a checklist of things to do on a car to ensure safe and reliable touring. I used it to organize my project and make sure I didn't miss anything. It might be on this site, or maybe someone could post a link? Cheers, Bill
by It's Bill
Fri Jun 11, 2021 7:59 am
Forum: General Discussion Forum
Topic: Hot rear drum....
Replies: 24
Views: 2918

Re: Hot rear drum....

Scott, if you install new hubs, see the thread on "how do I use this tool". Scott C points out a real buster on steel hubs. Good luck, and cheers! Bill
by It's Bill
Thu Jun 10, 2021 1:35 pm
Forum: General Discussion Forum
Topic: How do I use this tool?
Replies: 14
Views: 2730

Re: How do I use this tool?

Thanks to all. Boy, it would be great if the vendors would simply include a stainless shim with each hub. Scott, it never occurred to me that steel on steel would cause this issue. Now I am filled with trepidation and dread. I did put an extremely thin wipe of old fashioned lead based anti-seize on ...
by It's Bill
Thu Jun 10, 2021 10:14 am
Forum: General Discussion Forum
Topic: How do I use this tool?
Replies: 14
Views: 2730

How do I use this tool?

A couple of years ago, I rebuilt my Ruxtell rear axle using new hubs, axles, and keys from Langs. These parts were made to perfection, but fit together so well that now I cannot get the rear wheels off. I tried the screw-on puller in the photo, but it had no effect other than starting to damage the ...
by It's Bill
Wed Jun 02, 2021 8:45 pm
Forum: General Discussion Forum
Topic: Compilation of Stan Howe Emails on Rebuilding Ruckstells
Replies: 10
Views: 2929

Re: Compilation of Stan Howe Emails on Rebuilding Ruckstells

Thanks Mark. This is really nice of you to compile this information from a master. Cheers, Bill
by It's Bill
Wed Jun 02, 2021 8:38 pm
Forum: General Discussion Forum
Topic: Throttle and advance rods
Replies: 21
Views: 2981

Re: Throttle and advance rods

I hit the same wall. McMaster Carr was no help. I found a wire closet shelf that has rod in it that is very close to that size. Lowe's and HD have these, but one is good and the other not. I can't remember which is good, take a caliper. It made a great advance control rod. Cheers, Bill
by It's Bill
Tue Jun 01, 2021 10:03 pm
Forum: General Discussion Forum
Topic: Speedometer cable binding?
Replies: 2
Views: 818

Re: Speedometer cable binding?

I solved it. Road test next week. :D Bill
by It's Bill
Tue Jun 01, 2021 4:36 pm
Forum: General Discussion Forum
Topic: Speedometer cable binding?
Replies: 2
Views: 818

Speedometer cable binding?

Just hooked up my speedometer making sure the cable ends are properly engaged. The cable is wire, encased in a slippery plastic sheath, which is then inserted into the brass cable housing (spiral wound tube). The wire cable turns freely in the sheath, the speedometer turns freely and registers speed...
by It's Bill
Tue Jun 01, 2021 11:06 am
Forum: General Discussion Forum
Topic: 1911 dash shield installation
Replies: 6
Views: 1538

Re: 1911 dash shield installation

Promised pix. This car was first restored in the 50s from an original car by an HCCA chapter president. I have revised some details based on current research, but have tried to keep the car as it was excepting for safety, hidden functional updates, and improved restoration methods. The photos show a...
by It's Bill
Tue Jun 01, 2021 8:06 am
Forum: General Discussion Forum
Topic: 1911 dash shield installation
Replies: 6
Views: 1538

Re: 1911 dash shield installation

My dash has the mixture adjustment rod hole drilled already. I'll try to post a pic of how the brass trim came out. So it seems to me that the floorboard is the key to getting the metal parts in the correct orientation for mating with the dash? That is if I read your directions right, you fasten the...
by It's Bill
Mon May 31, 2021 4:59 pm
Forum: General Discussion Forum
Topic: 1911 dash shield installation
Replies: 6
Views: 1538

Re: 1911 dash shield installation

Thank you John, many times over! What is the restorer's best friend? No, not 0000 steel wool. It is 3M delicate surface masking tape (the purple stuff) as wide as you can find it. I bought a dash from Langs and put 2 weeks into finishing it before I figured out how to do it to my satisfaction. It is...
by It's Bill
Mon May 31, 2021 11:09 am
Forum: General Discussion Forum
Topic: 1911 dash shield installation
Replies: 6
Views: 1538

1911 dash shield installation

Does anyone have a good clear photo or drawing of how this shield is to be installed? Is it supposed to screw to the front floorboard, and do the ends need to be bent? Mine is a new fun projects part, and a sheet of historical info is included but no actual instructions. Thanks in advance, Bill
by It's Bill
Sun May 30, 2021 7:33 am
Forum: General Discussion Forum
Topic: Flat feeling TT
Replies: 27
Views: 4043

Re: Flat feeling TT

Could it be that the force of gravity has been turned up enough to flatten tires? Sure feels like it sometimes to me... ;) Bill
by It's Bill
Sun May 30, 2021 7:27 am
Forum: General Discussion Forum
Topic: Is there a Difference Between the Rust-Oleum's?
Replies: 15
Views: 2935

Re: Is there a Difference Between the Rust-Oleum's?

Rustoleum self priming 2x cover works fine for me. It is soft, but that is good on a part that flexes. I warm metal parts with a mapp gas torch before I spray the paint. This gets all the moisture out of the metal and helps prevent runs. You would not believe the amount of water that can come out of...
by It's Bill
Fri May 28, 2021 7:14 am
Forum: General Discussion Forum
Topic: The Packard and the Model T
Replies: 9
Views: 2434

Re: The Packard and the Model T

Welcome aboard, Commander Packard! Cheers, Bill
by It's Bill
Thu May 27, 2021 9:16 pm
Forum: Classifieds - Parts
Topic: ATTN: TIM MORSHER
Replies: 31
Views: 5081

Re: ATTN: TIM MORSHER

My transaction was flawless! Thanks Tim, Bill
by It's Bill
Wed May 26, 2021 5:15 pm
Forum: Classifieds - Parts
Topic: Explosion Whistle
Replies: 4
Views: 1521

Re: Explosion Whistle

Put it on the Locomobile!
by It's Bill
Wed May 26, 2021 5:13 pm
Forum: Classifieds - Parts
Topic: Model T Engine Stand
Replies: 24
Views: 4816

Re: Model T Engine Stand

Wait a minute, there is electrical equipment with gauges connected to the one in the photo. Is this a dawn-of-the-automobile dynamometer? Agree on the lever operated clutch, would seem likely to softly engage a new engine to a test load. You guys are incredible at analyzing old pix, can you tell wha...
by It's Bill
Tue May 25, 2021 4:42 pm
Forum: General Discussion Forum
Topic: Automobile Salvage Joy Tx
Replies: 13
Views: 3094

Re: Automobile Salvage Joy Tx

Heading south out of Burlington on route 206 in NJ, there used to be the most incredible collection of "salvage" I have ever seen a private individual put together. The guy was a locally famous hermit who built a large teepee out of sheet metal of all kinds in which he lived. He had lots of things i...
by It's Bill
Tue May 25, 2021 4:19 pm
Forum: Classifieds - Parts
Topic: Model T Engine Stand
Replies: 24
Views: 4816

Re: Model T Engine Stand

What is your guess on weight? Bill
by It's Bill
Sat May 22, 2021 4:45 pm
Forum: General Discussion Forum
Topic: Stan Howe RIP
Replies: 95
Views: 13436

Re: Stan Howe RIP

This reminds me of the day Elvis died. Unbelieveable. What a loss. My sincere condolences to the family and Stan's personal friends.Bill
by It's Bill
Sat May 22, 2021 4:40 pm
Forum: General Discussion Forum
Topic: Spark plug threads, a definitive summary?
Replies: 6
Views: 1716

Spark plug threads, a definitive summary?

Someone is currently advertising a number of spark plugs on the forum and is listing their thread forms and diameters. There are differences in these plugs. How do you determine what is correct for your head? Is there .a chart that specs what thread fits what year? My searching reveals only piecemea...
by It's Bill
Mon May 17, 2021 2:32 pm
Forum: General Discussion Forum
Topic: Not starting...thoughts?
Replies: 14
Views: 2628

Re: Not starting...thoughts?

Tried to start my new Joe Bell rebuilt engine, but no go. Finally got back to it today, and found I had switched two harness wires at the coil box. I plead temporary insanity. Fixed the wires, did the normal starting prep as outlined above, and she came to life! This is not my first rodeo, and I tho...
by It's Bill
Sun May 16, 2021 9:50 pm
Forum: General Discussion Forum
Topic: Post your pictures from Luray....!!
Replies: 32
Views: 4716

Re: Post your pictures from Luray....!!

Great Terry! No rush on the photos, thanks for sending when you get time. Cheers Bill

Ps. TX for the membership info Tim.
by It's Bill
Sat May 15, 2021 8:36 pm
Forum: General Discussion Forum
Topic: Post your pictures from Luray....!!
Replies: 32
Views: 4716

Re: Post your pictures from Luray....!!

How would I contact Terry Bond regarding his parts? Is there a membership list hiding somewhere? Thanks, Bill
by It's Bill
Sat May 15, 2021 8:18 pm
Forum: General Discussion Forum
Topic: Thank you Kim Dobbins
Replies: 2
Views: 1319

Re: Thank you Kim Dobbins

Kim is a stand up guy. None better! Thanks, Bill
by It's Bill
Sat May 15, 2021 7:49 am
Forum: General Discussion Forum
Topic: Post your pictures from Luray....!!
Replies: 32
Views: 4716

Re: Post your pictures from Luray....!!

Thanks for posting! The large headlights behind the 3 speedometers on the table with all the brass sidelights may be of interest to me. If you know the vendor, could you please ask him to contact me? Cheers, Bill
by It's Bill
Fri May 07, 2021 7:04 am
Forum: General Discussion Forum
Topic: Brass car original bling
Replies: 41
Views: 5960

Re: Brass car original bling

Holes can be removed... ;) Bill
by It's Bill
Fri May 07, 2021 6:57 am
Forum: General Discussion Forum
Topic: So what do you all use for a battery
Replies: 17
Views: 2647

Re: So what do you all use for a battery

12 volt lawnmower battery mounted under the rear seat (1911). About $23 on sale at NAPA. Recharge as neccessary. Cheers Bill
by It's Bill
Thu May 06, 2021 7:37 am
Forum: General Discussion Forum
Topic: Brass car original bling
Replies: 41
Views: 5960

Re: Brass car original bling

I added a brass step plate to avoid wear and tear on the running board paint. I think you have good ideas here. It seems the earliest cars had more brass which was then phased out as production continued, but I think any polished brass looks great against polished black. Little polished details like...
by It's Bill
Tue Apr 27, 2021 5:18 pm
Forum: Classifieds - Parts
Topic: FS Large set up of Vintage Ford & Model T Times
Replies: 7
Views: 1961

Re: FS Large set up of Vintage Ford & Model T Times

Interested newbie. Please send me an email. Thanks, Bill
by It's Bill
Mon Apr 26, 2021 7:05 am
Forum: Classifieds - Parts
Topic: UPDATE all gone! Ruckstell fiber washers
Replies: 36
Views: 4913

Re: Ruckstell fiber washers

Tim, I would like one of the .115 washers. A couple of questions: what is the reference cited in your post? My bell is new, so is the Ford steel piece also .115 thick, making the fiber one a direct replacement? And what is a hob? Email coming. Cheers, Bill
by It's Bill
Mon Apr 19, 2021 8:56 am
Forum: General Discussion Forum
Topic: A Day Two T
Replies: 1
Views: 1069

A Day Two T

A currently hot Jelf topic regarding restoration and originality contains an observation by Tim Juhl that has set me thinking. He said: “Let us not forget that the Model T was one of the most customized cars of it's time.... often beginning soon after it rolled out of the factory. I consider my car'...
by It's Bill
Sun Apr 18, 2021 7:19 am
Forum: General Discussion Forum
Topic: My apologies
Replies: 53
Views: 7189

Re: My apologies

Holy cow. I always learn something from the discussions your posts inspire, which is something you are really good at. I use the dauntless geezer site regularly because you provide such solid, easy to follow information. I say damn the torpedos, full speed ahead! Cheers, Bill
by It's Bill
Sat Apr 17, 2021 5:22 pm
Forum: Classifieds - Parts
Topic: Ruckstell Fiber Spacers
Replies: 26
Views: 3490

Re: Ruckstell Fiber Spacers

Still confused, where does fiber outperform the specified materials in the Chaffin book? Puzzled, Bill
by It's Bill
Thu Apr 15, 2021 5:27 pm
Forum: General Discussion Forum
Topic: Model T philosophy: What is a restoration?
Replies: 89
Views: 11144

Re: Model T philosophy: What is a restoration?

I am currently trying to decide on black or natural for the steering wheel on my 1911. Correct is black, but the wood looks so good! Until I saw the 1910 on the Ford fix site that has a black wheel, which is perfect. So here is where I am: finish the wheel natural and put mucho varnish on it, then p...
by It's Bill
Thu Apr 15, 2021 5:10 pm
Forum: Classifieds - Parts
Topic: Ruckstell Fiber Spacers
Replies: 26
Views: 3490

Re: Ruckstell Fiber Spacers

WHAT??? Elaborate please! Recently rebuilt, Bill
by It's Bill
Sun Apr 11, 2021 7:49 am
Forum: Classifieds - Parts
Topic: FS Tulare ("Bakersfield") Swap meet Pre Sale Aux Transmission, Engine Blocks, Disk Wheels
Replies: 18
Views: 3191

Re: FS Tulare ("Bakersfield") Swap meet Pre Sale Aux Transmission, Engine Blocks, Disk Wheels

Matt, I am on the wrong coast. What would the chances be of shipping the 5 Chevy wheels through fastenal? How old are the tubes & tires? I guess we should converse through email... Thanks, Bill
by It's Bill
Sat Apr 10, 2021 5:29 pm
Forum: General Discussion Forum
Topic: Couldn't resist
Replies: 11
Views: 2373

Re: Couldn't resist

Beautiful spot, an opportunity to promote the hobby, good public relations with an historical society and the special events business community. Five stars! If we want to promote the hobby, and incidentally create and strengthen a market for our cars so that there is interest in them when it is time...
by It's Bill
Tue Apr 06, 2021 5:04 pm
Forum: General Discussion Forum
Topic: You can do anything with a Ford !!
Replies: 15
Views: 3488

Re: You can do anything with a Ford !!

How things change. That torpedo in the photo is a mud bug, beaten like an old mule, but what would you pay to have it in your garage now? Bemused, Bill
by It's Bill
Tue Apr 06, 2021 4:57 pm
Forum: General Discussion Forum
Topic: Bib overalls alert.
Replies: 51
Views: 8303

Re: Bib overalls alert.

You know what? I have other clothes to wear and can wait for garments made in the USA. I'm all in with Roundhouse. Bill
by It's Bill
Tue Apr 06, 2021 7:27 am
Forum: General Discussion Forum
Topic: Bib overalls alert.
Replies: 51
Views: 8303

Re: Bib overalls alert.

Allan, thank you for this info! I will place an order and support these people going forward. I noticed that they have a "hickory stripe stylish uptown bib" which may be of particular interest to Mr. Jeff when he steps out. Thanks again, Bill
by It's Bill
Sun Apr 04, 2021 8:06 am
Forum: General Discussion Forum
Topic: A name is?
Replies: 32
Views: 5427

Re: A name is?

When I answer the phone, I say "It's Bill."
by It's Bill
Fri Apr 02, 2021 7:46 pm
Forum: General Discussion Forum
Topic: 1914 Firewall Finish
Replies: 22
Views: 3281

Re: 1914 Firewall Finish

Steven, if you wind up not cutting the slot, the only tricky thing you need to remove from the column is the little timing lever. The pitman arm needs to come off and then the column mountin bracket will just slide off which lets you pass the column through the firewall hole. I removed the timing le...
by It's Bill
Thu Apr 01, 2021 9:22 pm
Forum: General Discussion Forum
Topic: As requested: Curly Shock Photos
Replies: 8
Views: 2106

Re: As requested: Curly Shock Photos

There were 8 coils total, 2 at each corner. A man named Jerry Linder (he was a chapter president for the HCCA) restored this car back in the 50s from a good original and toured in it extensively for years throughout California. He even did a couple early Pebble Beach tours. There were many historic ...
by It's Bill
Thu Apr 01, 2021 9:54 am
Forum: General Discussion Forum
Topic: As requested: Curly Shock Photos
Replies: 8
Views: 2106

Re: As requested: Curly Shock Photos

One more photo
by It's Bill
Thu Apr 01, 2021 9:52 am
Forum: General Discussion Forum
Topic: As requested: Curly Shock Photos
Replies: 8
Views: 2106

As requested: Curly Shock Photos

Here are the pix I still have of the curly shocks that sold through the forum several years ago. I have not been able to locate the fellow that bought them - perhaps he will weigh in and you can request additional pix from him. Bob - I don't remember the rear spring perches being as long as the item...
by It's Bill
Tue Mar 30, 2021 8:22 am
Forum: General Discussion Forum
Topic: 1914 Firewall Finish
Replies: 22
Views: 3281

Re: 1914 Firewall Finish

FWIW, I just went through this and experimented with both P&L cherry bark and LMF cherry stain. They are both great products, and in my humble opinion there is not a dime's worth of difference between the two if they are brought to the same level of color saturation. They do look different when in t...
by It's Bill
Tue Mar 30, 2021 7:48 am
Forum: General Discussion Forum
Topic: Can you identify these spring perches Acme spring pat 4-26-10
Replies: 9
Views: 1825

Re: Can you identify these spring perches Acme spring pat 4-26-10

Yes, I sold that setup seems like 100 years ago. I have more photos if you want me to email them, but I didn't photograph the individual parts or part numbers. Not sure they were even on the parts. I will look. If you like, I can try to find the name and address of the gentleman who bought them. A s...
by It's Bill
Sat Mar 27, 2021 7:08 am
Forum: General Discussion Forum
Topic: Coolant II
Replies: 12
Views: 2100

Re: Coolant II

I wonder how many cooling problems are caused by badly adjusted carburetors? Hmmm, Bill
by It's Bill
Wed Mar 24, 2021 10:17 pm
Forum: General Discussion Forum
Topic: 1911 wire harness routing detail needed
Replies: 7
Views: 1400

Re: 1911 wire harness routing detail needed

Perfect, thanks very much guys!
by It's Bill
Wed Mar 24, 2021 5:14 pm
Forum: General Discussion Forum
Topic: 1911 wire harness routing detail needed
Replies: 7
Views: 1400

Re: 1911 wire harness routing detail needed

Thanks Kim! Looks like I had better start looking for change in the couch. If you (or anyone) have photos of this harness installed, it would be very helpful. Cheers, Bill
by It's Bill
Wed Mar 24, 2021 3:17 pm
Forum: General Discussion Forum
Topic: 1911 wire harness routing detail needed
Replies: 7
Views: 1400

Re: 1911 wire harness routing detail needed

Sorry for the triple post of teh first photo. I have no idea how that happened, or how to fix it... :?
by It's Bill
Wed Mar 24, 2021 3:16 pm
Forum: General Discussion Forum
Topic: 1911 wire harness routing detail needed
Replies: 7
Views: 1400

1911 wire harness routing detail needed

Hello, I am about to install my wiring harness on my new firewall. When my car came to me, the harness was fastened to the frame rail with spring clips, then ran vertically up to the hood former where it turned right and ran underneath the hood former to the coil box connections. The harness was hel...
by It's Bill
Wed Mar 24, 2021 7:56 am
Forum: General Discussion Forum
Topic: Tools and Spare Parts List for Touring? (Sizes of open-end wrenches?)
Replies: 25
Views: 3627

Re: Tools and Spare Parts List for Touring? (Sizes of open-end wrenches?)

If your car has a fuse, bring spares. I have a 10 amp at the battery that powers the car.
by It's Bill
Tue Mar 23, 2021 7:54 am
Forum: General Discussion Forum
Topic: All That Brass!
Replies: 20
Views: 3979

Re: All That Brass!

I have spent almost three weeks polishing everything on the 11. I use Autosol polish from Eastwood. It is somewhat expensive but it is good. My car was all disassembled for the engine rebuild, so everything could be reached for a thorough polishing. IMHO, that is the only way to do a top level job. ...