Hey Donnie,
Here is the field layout 2023 w/ vendor names.
We set this up at the entrance of the swap meet.
Camping on site is permitted. The VFW is trying to get shower rooms installed on site as well.
Hope this helps.
We are old school
Search found 208 matches
- Mon Mar 25, 2024 9:44 am
- Forum: General Discussion Forum
- Topic: What are you bringing to Luray?? Post it here to let us know.
- Replies: 4
- Views: 542
- Wed May 03, 2023 10:55 am
- Forum: General Discussion Forum
- Topic: What are you bringing to Luray?? Post it here to let us know.
- Replies: 40
- Views: 3729
Re: What are you bringing to Luray?? Post it here to let us know.
Luray Setup is Thursday May 11@ 3:00 PM
Friday May 12 - 8:00 AM- 5:00 PM
Saturday May 13 - 8:00 AM - 12:00 Noon
All information is on the flyer you can download and print from the website below
www.mapwsm.com
Friday May 12 - 8:00 AM- 5:00 PM
Saturday May 13 - 8:00 AM - 12:00 Noon
All information is on the flyer you can download and print from the website below
www.mapwsm.com
- Tue May 02, 2023 9:46 pm
- Forum: General Discussion Forum
- Topic: What are you bringing to Luray?? Post it here to let us know.
- Replies: 40
- Views: 3729
Re: What are you bringing to Luray?? Post it here to let us know.
We are nearing 70 vendors and some cool stuff is coming to Luray. I know of a 15 Model T touring , 16 Model T Touring, Model T Snowmobile, Model A speedster, 16 Studebaker , 1907 Thomas Body, early 1910’s Cadillac Parts, Buffalo Wire wheels and hubs, early Chevy parts. Ford Flat head parts. KRWilson...
- Tue Apr 04, 2023 8:05 am
- Forum: General Discussion Forum
- Topic: Only 8 weeks away, till LURAY!!!
- Replies: 6
- Views: 1088
Re: Only 8 weeks away, till LURAY!!!
MTFCI regional Model T tour begins Sunday following the swap meet. 3 days of touring the beautiful Shenandoah Valley. We will be traveling along the Shenandoah River and the Skyline Drive. Visiting Caverns, Civil War Battlefield, covered bridge, car museums, Cooters garage, brewery and much more. Co...
- Tue Jun 28, 2022 4:52 pm
- Forum: General Discussion Forum
- Topic: Disc Wheel identity
- Replies: 3
- Views: 960
Disc Wheel identity
Looks like 6:00 x 20 tires
- Tue May 24, 2022 6:39 pm
- Forum: General Discussion Forum
- Topic: T era tank??
- Replies: 9
- Views: 1377
- Tue May 24, 2022 6:37 pm
- Forum: General Discussion Forum
- Topic: T era tank??
- Replies: 9
- Views: 1377
Re: T era tank??
I'm pretty sure it is T era. I have an old oval truck tank that was Texaco. It has 3 compartments, was painted red, and had round Texaco logos about 8" in diameter. It is pre WWII, and it is welded together. I believe the 3 compartments were for gasoline, (large) kerosene, (medium) and motor oil.(s...
- Tue May 24, 2022 5:53 pm
- Forum: General Discussion Forum
- Topic: T era tank??
- Replies: 9
- Views: 1377
Re: T era tank??
This came from a family that was Texaco dealer for three generations
- Tue May 24, 2022 3:45 pm
- Forum: General Discussion Forum
- Topic: T era tank??
- Replies: 9
- Views: 1377
T era tank??
It has one inlet on top and one outlet on bottom rear. 80 inches long.
- Tue May 10, 2022 9:06 pm
- Forum: General Discussion Forum
- Topic: What are you bringing to LURAY? May 13 $ 14, 2022
- Replies: 35
- Views: 4991
Re: What are you bringing to LURAY? May 13 $ 14, 2022
I will be bringing a real nice teacup long nose 13/14 engine pan that is pan jig straight. A complete early 12 rivet rear end with two piece driveshaft and early cast end radius rods. 2 good used 13/14 radiators that would get a little warm on a long pull. Both hold water. Numerous other small items.
- Mon Mar 28, 2022 6:54 pm
- Forum: General Discussion Forum
- Topic: Model T Engine Oil Pan Shipping!
- Replies: 5
- Views: 1295
Model T Engine Oil Pan Shipping!
D16DC14B-8CBF-4252-A5AE-1B6F335BF7AA.jpeg EF8E608C-DA54-400A-A36E-486957E22F48.jpeg This was the first time I had sold a part and was ask if it would be a problem if I could deliver it to the airport and have it picked up. This is Luray airport Luray VA and the gentleman that bought the pan had a f...
- Wed Mar 23, 2022 10:26 am
- Forum: General Discussion Forum
- Topic: Not Model T but would really like help identifying this car
- Replies: 17
- Views: 2468
Re: Not Model T but would really like help identifying this car
Here is a scanned copy( as requested by Steve) of the Car with much clearer details .
- Thu Mar 17, 2022 9:11 am
- Forum: General Discussion Forum
- Topic: Not Model T but would really like help identifying this car
- Replies: 17
- Views: 2468
Re: Not Model T but would really like help identifying this car
Steve , I think the sidelights and headlights are covered in canvas bags.Steve Jelf wrote: ↑Wed Mar 16, 2022 11:33 pmfile.png
Here's the other one blown up. What is the thing between the front wheel and the edge of the picture?
- Thu Mar 17, 2022 7:17 am
- Forum: General Discussion Forum
- Topic: Not Model T but would really like help identifying this car
- Replies: 17
- Views: 2468
Re: Not Model T but would really like help identifying this car
Thanks to all the great response. It is much appreciated!!!
- Wed Mar 16, 2022 9:38 pm
- Forum: General Discussion Forum
- Topic: Not Model T but would really like help identifying this car
- Replies: 17
- Views: 2468
Re: Not Model T but would really like help identifying this car
Steve I do not have the actual photo. It was sent to me via text and ask if I knew what it was.
I have had two say that it was a Cadillac model 30 .
I have had two say that it was a Cadillac model 30 .
- Wed Mar 16, 2022 8:32 pm
- Forum: General Discussion Forum
- Topic: Not Model T but would really like help identifying this car
- Replies: 17
- Views: 2468
Not Model T but would really like help identifying this car
Would like to know what make and model is of this car.
Thanks
Thanks
- Mon Feb 14, 2022 5:19 pm
- Forum: General Discussion Forum
- Topic: Brass carburetor bowls
- Replies: 3
- Views: 1137
Brass carburetor bowls
I have these two brass bowls and they are 3 inch diameter. The NH bowls are 2 7/8 inch diameter. The one has a 1 inch center hole and the other has a 1/2 inch center hole. I am interested I learning what they fit.
- Wed Jan 12, 2022 9:53 am
- Forum: Classifieds - Parts
- Topic: FS - 13 tooth pinion SOLD
- Replies: 2
- Views: 1072
Re: FS - 13 tooth pinion
Sold, thanks Bryan and MTFCA
- Mon Jan 10, 2022 1:46 pm
- Forum: General Discussion Forum
- Topic: Pinion Gears
- Replies: 6
- Views: 1680
Re: Pinion Gears
Bryan I sent you a couple emails yesterday. Did you receive them?
- Sun Jan 09, 2022 11:01 am
- Forum: Classifieds - Parts
- Topic: FS - 13 tooth pinion SOLD
- Replies: 2
- Views: 1072
Re: FS - 13 tooth pinion
Bump to the top
- Sun Jan 09, 2022 10:59 am
- Forum: General Discussion Forum
- Topic: Pinion Gears
- Replies: 6
- Views: 1680
Re: Pinion Gears
Bryan, I sent you an email about the 13 tooth I have listed on the classifieds parts.
- Tue Jan 04, 2022 3:23 pm
- Forum: Classifieds - Parts
- Topic: FS - 13 tooth pinion SOLD
- Replies: 2
- Views: 1072
FS - 13 tooth pinion SOLD
13 tooth pinion for sale. Near new. $100 plus shipping
- Tue Dec 21, 2021 6:02 am
- Forum: Classifieds - Parts
- Topic: Wanted 2 - AA truck 20 disc rear rims and a Transmission for 29-30 AA Truck
- Replies: 4
- Views: 1126
Re: Wanted 2 - AA truck 20 disc rear rims and a Transmission for 29-30 AA Truck
Hi Charlie, we will need the 4 speed trans case. I agree we should be able to find one closer but will certainly keep you in mind if nothing shows up. I really appreciate your offer. Merry Christmas!!
- Mon Dec 20, 2021 11:18 pm
- Forum: Classifieds - Parts
- Topic: Wanted 2 - AA truck 20 disc rear rims and a Transmission for 29-30 AA Truck
- Replies: 4
- Views: 1126
- Mon Dec 20, 2021 11:12 pm
- Forum: Classifieds - Parts
- Topic: Wanted 2 - AA truck 20 disc rear rims and a Transmission for 29-30 AA Truck
- Replies: 4
- Views: 1126
Re: Wanted 2 - AA truck 20 disc rear rims and a Transmission for 29-30 AA Truck
For this truck. Want to make it a dull rear and the trans case is cracked. Any help appreciated. O
- Mon Dec 20, 2021 11:07 pm
- Forum: Classifieds - Parts
- Topic: Wanted 2 - AA truck 20 disc rear rims and a Transmission for 29-30 AA Truck
- Replies: 4
- Views: 1126
Wanted 2 - AA truck 20 disc rear rims and a Transmission for 29-30 AA Truck
I am looking for a pair of 20 inch disc rims for a AA truck and we need a transmission case for same truck. 540-860-1384
Thanks
Thanks
- Mon Dec 20, 2021 10:59 pm
- Forum: Classifieds - Parts
- Topic: USPS issue
- Replies: 33
- Views: 4364
Re: USPS issue
Fed ex delivery at 11:30 pm 2/10 mile from my house.
- Thu May 27, 2021 1:15 pm
- Forum: General Discussion Forum
- Topic: Repurposing Model T Parts
- Replies: 17
- Views: 3305
Re: Repurposing Model T Parts
My engine stand
- Tue May 18, 2021 2:37 pm
- Forum: General Discussion Forum
- Topic: HELP!!! LOST!! AT LURAY!!!
- Replies: 9
- Views: 3176
Re: HELP!!! LOST!! AT LURAY!!!
Jonah , would these be yours? 877D9303-44CF-4155-A4CA-7CB023C1DE0A.jpeg There was a pile left and I could not discard this. The magazines I gave to someone else and the Speedo was not much good as it was the pot metal gears and was all swelled up. I think that went on the scrap wagon. I have a big b...
- Wed May 05, 2021 9:53 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: “ SOLD”FS 1916 Model T Touring
The car is sold.
Thank you Sam Reed.
It is going to a great home.
Thank you Sam Reed.
It is going to a great home.
- Tue Apr 27, 2021 8:57 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
Sam I sent you a private email.
- Tue Apr 27, 2021 6:41 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
We will have this car at the Mid Atlantic Pre War Swap Meet May 14-15 in Luray or we can make arrangements before to look at it.
- Tue Apr 27, 2021 3:25 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
Yes this is still available
- Sun Apr 25, 2021 11:50 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
As far as I know the bands were replaced when the engine was rebuilt.
- Sat Apr 24, 2021 9:34 pm
- Forum: General Discussion Forum
- Topic: What are you bringing to sell at Luray?? May 14 & 15, 2021
- Replies: 32
- Views: 6683
Re: What are you bringing to sell at Luray?? May 14 & 15, 2021
We are nearing 60 vendors and I think we will have a great meet.
Looking forward to it!!!
Looking forward to it!!!
- Fri Apr 23, 2021 8:57 am
- Forum: General Discussion Forum
- Topic: What are you bringing to sell at Luray?? May 14 & 15, 2021
- Replies: 32
- Views: 6683
Re: What are you bringing to sell at Luray?? May 14 & 15, 2021
I will be looking for a good set of early AC style small drum brakes.
- Sun Apr 11, 2021 3:10 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
Here is a picture of the generator mount.
- Fri Apr 02, 2021 8:30 am
- Forum: General Discussion Forum
- Topic: What are you bringing to sell at Luray?? May 14 & 15, 2021
- Replies: 32
- Views: 6683
Re: What are you bringing to sell at Luray?? May 14 & 15, 2021
This will be at Luray if not sold before. Asking $15000.00. Can also be picked up at Luray Swap meet if needed.
Contact me if interested or want to arrange to see it.
540-860-1384
This car is listed in the classified section with more description. Contact me if interested or want to arrange to see it.
540-860-1384
- Fri Apr 02, 2021 8:18 am
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
Yes this car is in Luray VA.
If not sold before May 13 it will be at the Mid Atlantic Pre War Swap Meet in Luray May 14-15 2021. www.mapwsm.com
This is a very solid car and runs great
If not sold before May 13 it will be at the Mid Atlantic Pre War Swap Meet in Luray May 14-15 2021. www.mapwsm.com
This is a very solid car and runs great
- Wed Mar 17, 2021 5:29 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
The generator is there to charge the battery. He had installed a 6 volt battery in the usual location on the latter cars( under the rear floorboards ). As stated in the original post the car is equipped with a starter.
- Wed Mar 17, 2021 2:20 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
Art this car runs great on Mag.
- Sat Mar 13, 2021 3:07 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
I also have Video of the car running if interested
- Sat Mar 13, 2021 3:04 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
Re: FS 1916 Model T Touring
More photos
- Sat Mar 13, 2021 2:59 pm
- Forum: Classifieds - Vehicles
- Topic: “ SOLD”FS 1916 Model T Touring
- Replies: 27
- Views: 10509
“ SOLD”FS 1916 Model T Touring
This is a very good running car. This is a March of 1916 engine #. 4 New Calimer’s Wheel Shop wheels and new tires, Brassworks flat tube radiator and new gas tank. Body has been painted years ago. Original and very good wood , no body rustout or repair that I can see. I am listing this car for a goo...
- Fri Feb 19, 2021 5:06 pm
- Forum: General Discussion Forum
- Topic: 4th main Ruckstell shifter
- Replies: 6
- Views: 1431
- Fri Feb 19, 2021 5:00 pm
- Forum: General Discussion Forum
- Topic: 4th main Ruckstell shifter
- Replies: 6
- Views: 1431
Re: 4th main Ruckstell shifter
Hey Tom I think I have one that says passenger on it.
- Thu Feb 11, 2021 1:46 pm
- Forum: Classifieds - Parts
- Topic: FS - Two - TT Chassis & C- Cab sheet metal
- Replies: 5
- Views: 1460
Re: FS - Two - TT Chassis & C- Cab sheet metal
Sold!!!!! Thanks Rick
- Thu Feb 11, 2021 11:01 am
- Forum: Classifieds - Parts
- Topic: FS - Two - TT Chassis & C- Cab sheet metal
- Replies: 5
- Views: 1460
Re: FS - Two - TT Chassis & C- Cab sheet metal
More photos.
Located in Luray VA
. Located in Luray VA
- Thu Feb 11, 2021 10:58 am
- Forum: Classifieds - Parts
- Topic: FS - Two - TT Chassis & C- Cab sheet metal
- Replies: 5
- Views: 1460
FS - Two - TT Chassis & C- Cab sheet metal
I am listing these for a close friend. He is not a T guy but his father was tinkering with these and has suddenly passed away. Now he would like to have these gone. I have no room for them and all he is asking is $300.00 for both. You bring a trailer and we will load. Any questions and you may call ...
- Thu Jan 21, 2021 8:56 pm
- Forum: General Discussion Forum
- Topic: Nov./Dec. Vintage Ford
- Replies: 58
- Views: 7585
Re: Nov./Dec. Vintage Ford
I haven’t received mine yet
- Tue Jan 19, 2021 8:34 am
- Forum: Classifieds - Parts
- Topic: 1914 Colorado porcelain license plate
- Replies: 3
- Views: 1224
Re: 1914 Colorado porcelain license plate "SOLD"
Sold, Thank You Chris
- Sun Jan 17, 2021 10:31 am
- Forum: Classifieds - Parts
- Topic: 1914 Colorado porcelain license plate
- Replies: 3
- Views: 1224
Re: 1914 Colorado porcelain license plate
Price Drop $200.00 plus shipping
- Fri Jan 08, 2021 10:15 am
- Forum: Classifieds - Parts
- Topic: 1914 Colorado porcelain license plate
- Replies: 3
- Views: 1224
1914 Colorado porcelain license plate
As stated in the title. Use picture for condition. $250.00 plus shipping and insurance.
- Fri Jan 08, 2021 10:04 am
- Forum: General Discussion Forum
- Topic: Babbitt
- Replies: 18
- Views: 3565
Re: Babbitt
Are these useable for engine Babbitt ?
- Wed Dec 09, 2020 7:56 pm
- Forum: General Discussion Forum
- Topic: KR Wilson Key Cutter
- Replies: 9
- Views: 2536
Re: KR Wilson Key Cutter
Thanks , Mark,Jay, Dan,Jim, & Frank for all the information and help. I do not think I will ever use the key cutter. Is there any interest in this? Dan Hatch and Chris B. I could have set it on this one for display😏 5E034752-C115-4F11-A407-070D3C46F12D.jpeg and used that table for my fat pine kindli...
- Sun Dec 06, 2020 6:05 pm
- Forum: General Discussion Forum
- Topic: KR Wilson Key Cutter
- Replies: 9
- Views: 2536
KR Wilson Key Cutter
Does anyone know what Ford models this KR Wilson key cutter would work for? I don’t think it was used for T. Also is there a code book for the use of this machine. I have several plates with indexing # according to key manufacturer. Any help or advice would be appreciated. 1F5F8E6E-ACD0-4269-B342-5E...
- Thu Nov 19, 2020 7:13 pm
- Forum: General Discussion Forum
- Topic: Ford Perch puller
- Replies: 19
- Views: 3283
Re: Ford Perch puller
I did not take any other picture. Basically it is a block of steel with that threaded screw through the middle. The screw is about 3/4 inch diameter. The steel is about 3 inches x 11/2 x 1 inch thick. The screw is about 3-4 inch long with a bevel cup on the end. I can’t figure how it can pull a perc...
- Thu Nov 19, 2020 3:01 pm
- Forum: General Discussion Forum
- Topic: Ford Perch puller
- Replies: 19
- Views: 3283
Ford Perch puller
Anybody know what this is for?
- Fri Nov 13, 2020 3:16 pm
- Forum: General Discussion Forum
- Topic: Old photos of Sprague Worm Steering Gear For Fords
- Replies: 13
- Views: 2839
Re: Old photos of Sprague Worm Steering Gear For Fords
John, This steering box was on the car when I bought it. This car is accessorized to the hilt. It was owned from new by a woman in central PA. She had to this stuff put on the car early on by the dealer AJ List in Tyrone PA. As you can see on the link above there is a lot of the accessories shown. A...
- Wed Nov 11, 2020 9:37 pm
- Forum: General Discussion Forum
- Topic: Old photos of Sprague Worm Steering Gear For Fords
- Replies: 13
- Views: 2839
Re: Old photos of Sprague Worm Steering Gear For Fords
here is the one on my 1923 center door
- Thu Oct 15, 2020 10:52 am
- Forum: General Discussion Forum
- Topic: Looking for a Forum member
- Replies: 3
- Views: 1174
Re: Looking for a Forum member
I sent you an email Mike
- Wed Oct 14, 2020 12:09 pm
- Forum: General Discussion Forum
- Topic: 1914 Runaouts
- Replies: 12
- Views: 2747
Re: 1914 Runaouts
Larry,
There is nothing stamped on the riser nor any numbers and or letters stamped in the wooden front cross member under the seat. As I had mentioned to you some of this was replaced years ago and I think the numbers were lost to history.
There is nothing stamped on the riser nor any numbers and or letters stamped in the wooden front cross member under the seat. As I had mentioned to you some of this was replaced years ago and I think the numbers were lost to history.
- Fri Oct 09, 2020 7:45 am
- Forum: General Discussion Forum
- Topic: Luray, VA Mid-Atlantic Pre-War Swap Meet Pics
- Replies: 30
- Views: 5077
Re: Luray, VA Mid-Atlantic Pre-War Swap Meet Pics
Jonah it was a pleasure being your neighbor at the Mid Atlantic Pre War Swap Meet. Hope to see you and your family in May at the next Luray meet.
- Mon Oct 05, 2020 7:46 am
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11128
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
Hi Richard,
Due to the logistics and the size of this meet we will not have our manned consignment table at this special event. We will consider it for our regular spring meet in May.
Thanks for asking
Due to the logistics and the size of this meet we will not have our manned consignment table at this special event. We will consider it for our regular spring meet in May.
Thanks for asking
- Fri Oct 02, 2020 7:52 pm
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11128
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
For now it looks like we are in for some fantastic fall weather here in Luray. Looking forward to seeing everyone. I will have a good assortment of Model T Parts. Windshields, engine blocks , transmission parts, wheels, gas tanks, front end and rearend parts. Some TT stuff and a 26 coupe. 0FC8F341-5...
- Tue Sep 29, 2020 11:11 pm
- Forum: General Discussion Forum
- Topic: Generator trouble shooting. Suggestions?
- Replies: 3
- Views: 1346
Generator trouble shooting. Suggestions?
I have a generator that pegs the amp meter while running fast idle and after a few minutes run time the commutator starts to get hot and smoke. Took the brush cover off and while running there are sparks running around the commutator from the brushes. Wiring is correct and when a load is put on ,the...
- Tue Sep 29, 2020 3:54 pm
- Forum: General Discussion Forum
- Topic: Common Wrench: Unusual Ford Script
- Replies: 9
- Views: 2163
Re: Common Wrench: Unusual Ford Script
I think these wrenches are cast steel and a supplier used an existing wrench as a pattern which has left what is called a ghost mark in the sand mold. The supplier probably was required to use the current approved logo. You find this in cast iron skillets from time to time when a new foundry would t...
- Sun Sep 27, 2020 10:23 am
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11128
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
Long range weather forecast is looking pretty decent right now
- Sat Sep 26, 2020 11:49 am
- Forum: General Discussion Forum
- Topic: Cool accessory !!!
- Replies: 4
- Views: 1631
Re: Cool accessory !!!
You got it!!
- Sat Sep 26, 2020 9:42 am
- Forum: General Discussion Forum
- Topic: Cool accessory !!!
- Replies: 4
- Views: 1631
Cool accessory !!!
Who can guess the purpose of this accessory? I know because I found it in its intended spot on a Model T Ford. It is made of brass and felt lined.
- Thu Sep 24, 2020 8:41 pm
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11128
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
Had a call today that a gentleman is bringing a barn fresh Dec 1910 touring to the Mid Atlantic Pre War Swap Meet In October for sale. Can’t wait to see it.
- Tue Sep 15, 2020 9:26 pm
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11128
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
I have a friend that I think is coming that has a 26-27 gas tank for sale.
- Wed Sep 09, 2020 8:15 pm
- Forum: General Discussion Forum
- Topic: Anybody From Va, Licenceing Question
- Replies: 5
- Views: 1706
Re: Anybody From Va, Licenceing Question
If you are using antique tags provided by the DMV you are required to display front and rear. One exception to this is if you register to Year of Manufacture plates you are only required to display as provided in that year. Some early years it think 1914 and earlier may have only had one rear plate.
- Thu Sep 03, 2020 8:07 pm
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11128
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
Richard,
If I were you I would attend Tuesday morning as that will be your best bet to see the most stuff.
I have not had any vendors say they would be here late.
Thank you and hope to see you at the meet
If I were you I would attend Tuesday morning as that will be your best bet to see the most stuff.
I have not had any vendors say they would be here late.
Thank you and hope to see you at the meet
- Tue Sep 01, 2020 11:36 am
- Forum: General Discussion Forum
- Topic: New to hobby and am looking for swap meet in or near northeast TN!
- Replies: 45
- Views: 4687
Re: New to hobby and am looking for swap meet in or near northeast TN!
Hi Jonah, The Mid Atlantic Pre War Swap Meet here in Luray is normally held in the middle of May each year. Do to the fact that Hershey has been cancelled this year we believe we can safely hold a meet during the same week. This is a one time fall event. We will resume the spring meet next May and h...
- Mon Aug 24, 2020 11:03 am
- Forum: General Discussion Forum
- Topic: Transport available VA to CO
- Replies: 0
- Views: 635
Transport available VA to CO
Empty 22 ft enclosed trailer heading to Colorado this coming weekend. Anyone need to move a car anywhere between VA and CO.
PM me if interested. Reasonable costs.
Thank you ,
Dennis
PM me if interested. Reasonable costs.
Thank you ,
Dennis
- Sun Aug 23, 2020 5:15 pm
- Forum: General Discussion Forum
- Topic: Model T Engine Stand
- Replies: 7
- Views: 2064
Model T Engine Stand
I posted on the Model T Ford Club of Facebook a while back about an engine stand I built from a Model T rear differential. Things I have found out. I can rotate the engine and transmission w/ pan 360 degrees. I can not rotate all the way around with the hogshead or the crank handle in place. The wei...
- Thu Jul 16, 2020 5:49 pm
- Forum: Classifieds - Parts
- Topic: FS - Lot of Ford T Parts
- Replies: 8
- Views: 3927
Re: FS - Lot of Ford T Parts
Tom just give me a few days notice .
- Thu Jul 16, 2020 1:27 pm
- Forum: Classifieds - Parts
- Topic: FS - Lot of Ford T Parts
- Replies: 8
- Views: 3927
Re: FS - Lot of Ford T Parts
Hi Tom . I am in Luray. I think you were at the Luray Swap Meet May 2019. I think I have a decent tool box if you want to come look.
Larry,
I can have a one man swap meet.
Larry,
I can have a one man swap meet.
- Mon Jul 13, 2020 8:44 am
- Forum: Classifieds - Parts
- Topic: FS - Standard Headlight lens . After market
- Replies: 1
- Views: 1591
Re: FS - Standard Headlight lens . After market
New Price $10.00 plus shipping
- Mon Jul 13, 2020 8:42 am
- Forum: Classifieds - Parts
- Topic: WTB Headlight Lens Like Pictured 71/2 inch Need One
- Replies: 3
- Views: 2225
Re: WTB Headlight Lens Like Pictured 71/2 inch Need One
Joe, Thanks but that would be like having one leg shorter than the other
Hank, I think hens teeth may be more common!!!
Hank, I think hens teeth may be more common!!!
- Fri Jul 10, 2020 4:32 pm
- Forum: Classifieds - Parts
- Topic: FS - Lot of Ford T Parts
- Replies: 8
- Views: 3927
Re: FS - Lot of Ford T Parts
And more!!!! These standard oil tanks and pumps will go also if wanted.
- Fri Jul 10, 2020 4:24 pm
- Forum: Classifieds - Parts
- Topic: FS - Lot of Ford T Parts
- Replies: 8
- Views: 3927
- Fri Jul 10, 2020 4:21 pm
- Forum: Classifieds - Parts
- Topic: FS - Lot of Ford T Parts
- Replies: 8
- Views: 3927
FS - Lot of Ford T Parts
To much to list. If any interest I would like to sell the lot. At least 7 engine blocks a couple complete engines . A bunch of small items. Rear end , front end parts. Front and rear wheels Windshields, radiators. 5 or 6 frames. Call if interested. 540 - 860 - 1384. Located in VA 70353DEB-8E86-43C0-...
- Fri Jul 10, 2020 2:20 pm
- Forum: Classifieds - Parts
- Topic: FS - Ford H Headlight Lens
- Replies: 2
- Views: 1583
Re: FS - Ford H Headlight Lens
Sold to Mark.
Thanks
Thanks
- Fri Jul 10, 2020 2:14 pm
- Forum: Classifieds - Parts
- Topic: WTB Headlight Lens Like Pictured 71/2 inch Need One
- Replies: 3
- Views: 2225
- Fri Jul 10, 2020 2:10 pm
- Forum: Classifieds - Parts
- Topic: FS - Standard Headlight lens . After market
- Replies: 1
- Views: 1591
FS - Standard Headlight lens . After market
Asking $15.00 plus shipping. No chips or cracks . Good clean clear glass.
- Fri Jul 10, 2020 2:06 pm
- Forum: Classifieds - Parts
- Topic: FS - Ford H Headlight Lens
- Replies: 2
- Views: 1583
FS - Ford H Headlight Lens
Asking 10.00 plus shipping. Good clean glass two small flea bites on the edge.
- Mon Jun 22, 2020 7:42 pm
- Forum: General Discussion Forum
- Topic: Is this too dangerous to keep as is?
- Replies: 20
- Views: 6713
Re: Is this too dangerous to keep as is?
If the wishbone orientation is incorrect and not installed correctly then the answer to the tittle and question of this thread is absolutely YES!!
The gap between the drag link and wishbone is far less worrisome period!
Please be safe.
The gap between the drag link and wishbone is far less worrisome period!
Please be safe.
- Thu Jun 18, 2020 10:04 pm
- Forum: General Discussion Forum
- Topic: Is this too dangerous to keep as is?
- Replies: 20
- Views: 6713
Re: Is this too dangerous to keep as is?
Plus the wishbone looks to be installed upside down. If it is ,flipping it would change the gap on the drag link and set the proper caster on the spindles. It appears the spindles are straight up and down or slightly leaning forward on top. Just something to think about.
- Wed Jun 17, 2020 10:06 am
- Forum: General Discussion Forum
- Topic: Luray Swap Meet
- Replies: 9
- Views: 3916
Re: Luray Swap Meet
Tuesday through Thursday seems like an odd choice of dates, but that's what their website says. Hi Mike, our club has decided on the mid week dates because of several factors. Fall Carlisle swap meet ends on Oct 4 and normally many of the vendors would migrate to Hershey the following week. Hershey...
- Fri Jun 12, 2020 8:38 am
- Forum: General Discussion Forum
- Topic: Commercial Bodies for Ford Cars
- Replies: 7
- Views: 2863
Commercial Bodies for Ford Cars
I have this 1916 Sears catalog and this is the listing for bodies. I am curious who the company was that built them?It says shipped from Evansville Ind.
- Sat May 09, 2020 12:39 pm
- Forum: General Discussion Forum
- Topic: Tool identity????
- Replies: 2
- Views: 1613
Re: Tool identity????
Thank you,
Dennis
Dennis
- Sat May 09, 2020 12:05 pm
- Forum: General Discussion Forum
- Topic: Tool identity????
- Replies: 2
- Views: 1613
Tool identity????
I found this in a box of Model T Tools and can not figure out its use. At the base of the handle it has National Jack- - Mich. I don’t know if it is Jack(something) or maybe Jackson, Mich. It is 8 inches long. anybody know what it is??? 51D95157-4230-4A0C-91E9-91990D23CD63.jpeg AAB6379D-F347-47AD-AE...
- Wed Apr 01, 2020 7:30 am
- Forum: General Discussion Forum
- Topic: CANCELLED - Luray 2020, Mid Atlantic Prewar Swap Meet
- Replies: 6
- Views: 2924
Re: CANCELLED - Luray 2020, Mid Atlantic Prewar Swap Meet
Tom, thank you for thinking of the veterans during this tough time for our nation and the world.
- Mon Mar 23, 2020 3:02 pm
- Forum: General Discussion Forum
- Topic: Radiator Cap Project
- Replies: 10
- Views: 3936
Re: Radiator Cap Project
This duck is hollow and is not as heavy as a motometer.
- Mon Mar 23, 2020 12:49 pm
- Forum: General Discussion Forum
- Topic: Radiator Cap Project
- Replies: 10
- Views: 3936
Re: Radiator Cap Project
Thanks for the comments . I discovered there is a very fine line between to hot ,to cold , to much and not enough when it comes to brazing brass to brass. Fun project during this down time.
Terry as for the Luray Swap Meet we will be deciding on April 15 as to weather it is on or not.
Terry as for the Luray Swap Meet we will be deciding on April 15 as to weather it is on or not.
- Mon Mar 23, 2020 10:05 am
- Forum: General Discussion Forum
- Topic: Radiator Cap Project
- Replies: 10
- Views: 3936
Radiator Cap Project
Found this Brass Duck on the 2019 Florida winter tour at a flea market. My wife and I thought it would be a cute radiator cap. So yesterday I tried my hand at brazing this duck to a cap. I think he turned out ok. BA994F4E-6907-4FA1-8C1A-6BC2371CDFE1.jpeg 86171D6B-ADC9-4D27-906F-1CE0E5363BA8.jpeg A3F...
- Wed Mar 18, 2020 1:37 pm
- Forum: General Discussion Forum
- Topic: Mid Atlantic Pre War Swap Meet
- Replies: 2
- Views: 1604
Mid Atlantic Pre War Swap Meet
Just an update on our meet. At this time we are not cancelling our meet. We will address this on April 15 which will be one month before the scheduled event (May 15,16). I am praying that we get a handle on this virus and can get back to normal. Let’s just see how this plays out. God bless y’all and...
- Wed Mar 18, 2020 1:30 pm
- Forum: Classifieds - Parts
- Topic: FS 13-14 Carbide Genorator
- Replies: 5
- Views: 3088
Re: FS 13-14 Carbide Genorator
Hey Randall,
Sorry I do not. Hope to see you in Luray. We will be deciding what will happen on April 15 with the swap meet
Sorry I do not. Hope to see you in Luray. We will be deciding what will happen on April 15 with the swap meet