Is your KRW gage in calibration? Sounds like is not. If it was it would have told you what shims you needed.
You need the instructions on how to use it, they are in the Service Bulletins.
Search found 4139 matches
- Wed Apr 17, 2024 2:31 pm
- Forum: General Discussion Forum
- Topic: Re: magneto issue
- Replies: 22
- Views: 567
- Mon Apr 15, 2024 2:13 pm
- Forum: General Discussion Forum
- Topic: What are you bringing to Luray?? Post it here to let us know.
- Replies: 17
- Views: 1706
Re: What are you bringing to Luray?? Post it here to let us know.
You need tell what year RR you are looking for. Makes a difference.
- Sat Apr 13, 2024 1:07 pm
- Forum: General Discussion Forum
- Topic: Color for coil box wood 1926
- Replies: 4
- Views: 232
Re: Color for coil box wood 1926
What happened to the Fun Project replacement?
- Fri Apr 12, 2024 8:38 pm
- Forum: General Discussion Forum
- Topic: 1920 Canadian Touring
- Replies: 16
- Views: 501
Re: 1920 Canadian Touring
Should also have a one man top me thinks.
- Fri Apr 12, 2024 6:33 am
- Forum: General Discussion Forum
- Topic: Brass plugs in car. Passageways
- Replies: 5
- Views: 431
Re: Brass plugs in car. Passageways
Just be sure you don’t thread the screw in so far as to block the passage way.
- Thu Apr 11, 2024 6:42 am
- Forum: General Discussion Forum
- Topic: Stevens Front Axle Tooling
- Replies: 6
- Views: 706
Re: Stevens Front Axle Tooling
No interest?
- Sun Apr 07, 2024 4:47 pm
- Forum: Classifieds - Parts
- Topic: Model T puzzle #2
- Replies: 1
- Views: 226
Model T puzzle #2
Here is another Rockwell print puzzle. This one is “The Street was Never the Same Again.” It is also from the 50 year prints he did from Ford in1953. It had been opened and I am not sure if all there, but I think they are. You will know when you put it together. $20 + shipping. Email me at address i...
- Sun Apr 07, 2024 1:38 pm
- Forum: General Discussion Forum
- Topic: Who made this?
- Replies: 7
- Views: 943
Re: Who made this?
Still looking? Anyone know who did this?
- Sat Apr 06, 2024 2:58 pm
- Forum: General Discussion Forum
- Topic: Who made this?
- Replies: 7
- Views: 943
Re: Who made this?
Thanks for the post, but I’m interested in who made this one. Is it one of a kind or were they produced in mass? And by who ?
Do know the speedster this was in came out of Texas. I think around Houston. Dan
Do know the speedster this was in came out of Texas. I think around Houston. Dan
- Fri Apr 05, 2024 10:21 am
- Forum: General Discussion Forum
- Topic: paint cost
- Replies: 30
- Views: 1673
Re: paint cost
Most body shops will NOT paint your stuff like a body. They are making too much doing insurance work.
I was told this a few years ago while looking for someone to paint my Roadster. I made my own booth and did myself.
I was told this a few years ago while looking for someone to paint my Roadster. I made my own booth and did myself.
- Fri Apr 05, 2024 10:16 am
- Forum: General Discussion Forum
- Topic: Who made this?
- Replies: 7
- Views: 943
Re: Who made this?
Thanks, but I know what it is.
Looking for who made it and is he still making them. Or was it a one of a kind? Dan
Looking for who made it and is he still making them. Or was it a one of a kind? Dan
- Fri Apr 05, 2024 10:14 am
- Forum: General Discussion Forum
- Topic: Ruckstell with 12 rivet Housing??
- Replies: 8
- Views: 622
Re: Ruckstell with 12 rivet Housing??
I would just get a later housing to match pinion bearing housing on driveshaft and the Ruckstell housing. Save the early stuff.
But that is just me.
But that is just me.
- Fri Apr 05, 2024 8:34 am
- Forum: General Discussion Forum
- Topic: Who made this?
- Replies: 7
- Views: 943
Re: Who made this?
Here are more and email.
- Fri Apr 05, 2024 8:33 am
- Forum: General Discussion Forum
- Topic: Who made this?
- Replies: 7
- Views: 943
Who made this?
Does anyone know who made this? Is it still available? Came off a speedster friend has. Don’t know history, hope someone here can tell me more. It bolts to what looks to be Model A transmission so it can bolt on to a T engine. Replaces the Ball Cap, AKA 4th main. Thinking about making them if no one...
- Thu Apr 04, 2024 4:47 pm
- Forum: Classifieds - Parts
- Topic: Ford Puzzle
- Replies: 3
- Views: 630
Re: Ford Puzzle
Sold pending payment
- Thu Apr 04, 2024 2:50 pm
- Forum: Classifieds - Parts
- Topic: Ford Puzzle
- Replies: 3
- Views: 630
Ford Puzzle
Here is an unusual Norman Rockwell/ Ford puzzle. The painting these puzzles were made from were made for Ford 50 year anniversary. We all have seen the prints, they were given away to Ford dealers and the dealers gave them away. They were also made into puzzles. This one is Henry in his workshop bui...
- Thu Apr 04, 2024 10:55 am
- Forum: Classifieds - Parts
- Topic: New batch of Stevens insert ready FS
- Replies: 65
- Views: 4537
Re: New batch of Stevens insert ready FS
Back to the top
- Thu Apr 04, 2024 10:53 am
- Forum: General Discussion Forum
- Topic: Stevens Front Axle Tooling
- Replies: 6
- Views: 706
Re: Stevens Front Axle Tooling
Back to the top. Looks like no interest.
- Wed Apr 03, 2024 11:57 am
- Forum: Classifieds - Parts
- Topic: New batch of Stevens insert ready FS
- Replies: 65
- Views: 4537
Re: New batch of Stevens insert ready FS
Back to the top
- Tue Apr 02, 2024 4:03 pm
- Forum: General Discussion Forum
- Topic: Tight steering
- Replies: 25
- Views: 1154
Re: Tight steering
That word IF is a mighty big word.
I have not seen a T front axle with good threads and no wear in the upper hole in years.
Can’t even find them at Hershey. Dan
I have not seen a T front axle with good threads and no wear in the upper hole in years.
Can’t even find them at Hershey. Dan
- Tue Apr 02, 2024 11:46 am
- Forum: General Discussion Forum
- Topic: Stevens Front Axle Tooling
- Replies: 6
- Views: 706
Stevens Front Axle Tooling
I have been asked to consider making another run of my Stevens Front axle tooling. This will be the Upper Tapered Reamer and the Lower Reamer/Tap. I can only do this if I have at least 12 people wanting a set. I don’t know price but am sure it will be higher that last run. I think it will be over $5...
- Tue Apr 02, 2024 11:41 am
- Forum: General Discussion Forum
- Topic: Transmission end plates
- Replies: 5
- Views: 464
Re: Transmission end plates
Last year at Luray there was a sample of the new reproduction Driven Plate that someone was working on making. Looked great, hope to see more this year. Dan
- Tue Apr 02, 2024 11:34 am
- Forum: Classifieds - Parts
- Topic: New batch of Stevens insert ready FS
- Replies: 65
- Views: 4537
Re: New batch of Stevens insert ready FS
Back to the top
- Tue Apr 02, 2024 11:32 am
- Forum: General Discussion Forum
- Topic: Tight steering
- Replies: 25
- Views: 1154
Re: Tight steering
Here is tool in action. Thanks to Bill for making this years ago. Sometimes you can find these tools for sale. https://www.youtube.com/watch?v=7DNGT7P79vg I made the tooling and still make the inserts. I could be talked into making the tooling again, but it is not cheap. Dan Here is link to my last ...
- Tue Apr 02, 2024 7:38 am
- Forum: General Discussion Forum
- Topic: Tight steering
- Replies: 25
- Views: 1154
Re: Tight steering
Check the axle itself.
Sounds like a job for Stevens Front Axle tool.
Sounds like a job for Stevens Front Axle tool.
- Sun Mar 31, 2024 1:03 pm
- Forum: Classifieds - Vehicles
- Topic: WTB?: Right hand drive Coupe
- Replies: 5
- Views: 1196
Re: WTB?: Right hand drive Coupe
You can sometimes find them in Canada.
Have not seen one for sale in a while.
Have not seen one for sale in a while.
- Sun Mar 31, 2024 1:01 pm
- Forum: Classifieds - Parts
- Topic: T trailer FS
- Replies: 6
- Views: 811
Re: T trailer FS
Something else you can bring to Luray.
- Sat Mar 30, 2024 6:42 pm
- Forum: Classifieds - Parts
- Topic: 1914 Coil Box (SOLD)
- Replies: 5
- Views: 703
Re: 1914 Coil Box
Has correct switch cover
- Sat Mar 30, 2024 2:19 pm
- Forum: General Discussion Forum
- Topic: Welded rods with an A crank
- Replies: 11
- Views: 1009
Re: Welded rods with an A crank
Flat top pistons.
- Sat Mar 30, 2024 12:38 pm
- Forum: General Discussion Forum
- Topic: Welded rods with an A crank
- Replies: 11
- Views: 1009
Re: Welded rods with an A crank
Buick 3800 V6 pistons will work. Need special bushings for A rods.
- Fri Mar 29, 2024 3:15 pm
- Forum: General Discussion Forum
- Topic: 1927 Gas filter
- Replies: 14
- Views: 743
Re: 1927 Gas filter
Smith and Jones? Did you try them?
- Fri Mar 29, 2024 2:12 pm
- Forum: General Discussion Forum
- Topic: 1927 Gas filter
- Replies: 14
- Views: 743
Re: 1927 Gas filter
Did you try other vendors?
- Fri Mar 29, 2024 11:09 am
- Forum: Classifieds - Parts
- Topic: Glass Visor for open car FS
- Replies: 4
- Views: 663
Re: Glass Visor for open car FS
Take it to Luray in May.
- Thu Mar 28, 2024 1:56 pm
- Forum: Classifieds - Parts
- Topic: WTB Hub Caps
- Replies: 10
- Views: 561
Re: WTB Hub Caps
Wonder what ever happened to the dies?
Is someone making hubcaps off of them?
Or has another item fallen off the face of the planet?
Is someone making hubcaps off of them?
Or has another item fallen off the face of the planet?
- Wed Mar 27, 2024 10:17 pm
- Forum: Classifieds - Parts
- Topic: WTB: NOS SPINDLE ARMS
- Replies: 8
- Views: 485
Re: WTB: NOS SPINDLE ARMS
You still looking? Email me. Dan
- Tue Mar 26, 2024 4:51 pm
- Forum: General Discussion Forum
- Topic: 24 roadster wood questions
- Replies: 6
- Views: 507
Re: 24 roadster wood questions
You need a set of wood plans by Mel Miller or Leon Parker.
Someone needs to find out what happened to all of their plans, buy the rights and start reproducing them.
Someone needs to find out what happened to all of their plans, buy the rights and start reproducing them.
- Mon Mar 25, 2024 10:43 am
- Forum: General Discussion Forum
- Topic: *NEW* Wide-Track Axle Shafts. Any Interest??
- Replies: 7
- Views: 647
Re: *NEW* Wide-Track Axle Shafts. Any Interest??
Back to top. If you think you need some better get them.
- Sat Mar 23, 2024 10:34 pm
- Forum: General Discussion Forum
- Topic: *NEW* Wide-Track Axle Shafts. Any Interest??
- Replies: 7
- Views: 647
Re: *NEW* Wide-Track Axle Shafts. Any Interest??
I am in for a pair. Dan
- Fri Mar 22, 2024 2:02 pm
- Forum: Classifieds - Parts
- Topic: WTB: WIDE-TRACK PARTS, Drag-Link
- Replies: 5
- Views: 481
Re: WTB: WIDE-TRACK PARTS, Drag-Link
Here is easily way.
Even on one end, look at the other end. Same with the toe rod.
Even on one end, look at the other end. Same with the toe rod.
- Wed Mar 20, 2024 7:26 pm
- Forum: General Discussion Forum
- Topic: Coil tar/bitumen removal
- Replies: 9
- Views: 610
Re: Coil tar/bitumen removal
Since you don’t know what is inside it you might try taking it to your doctor office and get it xray of it.
Did that one time with a piece of electronics equipment at a plant to see how to take it apart. Dan
Did that one time with a piece of electronics equipment at a plant to see how to take it apart. Dan
- Wed Mar 20, 2024 2:27 pm
- Forum: Classifieds - Parts
- Topic: Kant-Stik Big Gas valves available for Holley NH carbs - sold out
- Replies: 13
- Views: 3484
Re: Kant-Stik Big Gas valves available for Holley NH carbs - limited availability
Email sent. Thanks Dan
- Tue Mar 19, 2024 9:27 am
- Forum: General Discussion Forum
- Topic: HCCA TOUR Chattanooga???
- Replies: 7
- Views: 753
Re: HCCA TOUR Chattanooga???
Back to the top
- Sun Mar 17, 2024 10:34 pm
- Forum: General Discussion Forum
- Topic: What are you bringing to Luray?? Post it here to let us know.
- Replies: 17
- Views: 1706
Re: What are you bringing to Luray?? Post it here to let us know.
Here is link to their website
https://www.mapwsm.com/
You can google the address of VFW and look at the site. I think they allow camping on the swap spaces plus there is campgrounds close by.
Very beautiful country there.
And there is a vendor dinner one night at VFW too. Those guys do a great job.
https://www.mapwsm.com/
You can google the address of VFW and look at the site. I think they allow camping on the swap spaces plus there is campgrounds close by.
Very beautiful country there.
And there is a vendor dinner one night at VFW too. Those guys do a great job.
- Sun Mar 17, 2024 1:18 pm
- Forum: General Discussion Forum
- Topic: Chickasha swapmeet ends
- Replies: 28
- Views: 2071
Re: Chickasha swapmeet ends
Come to Luray this May. You will be coming back ever year. You can see parts there that have not been on the market in years.
- Sat Mar 16, 2024 3:08 pm
- Forum: General Discussion Forum
- Topic: 1919 Under The Hood Wiring Harness Routing
- Replies: 9
- Views: 354
Re: 1919 Under The Hood Wiring Harness Routing
Do I see a metal firewall on a “19” Touring? Dan
- Fri Mar 15, 2024 9:09 pm
- Forum: General Discussion Forum
- Topic: I texted a friend asking "How was Chickasha today?"....
- Replies: 39
- Views: 3821
Re: I texted a friend asking "How was Chickasha today?"....
Yous guys better sign up for Luray. Coming in May.
- Sat Mar 09, 2024 12:00 pm
- Forum: General Discussion Forum
- Topic: Top support thread size
- Replies: 1
- Views: 231
Top support thread size
On a 27 Touring what is thread size of the top support rod that screws into to body. Where the rubber plugs are removed.
Does 11/16 x 16 TPI sound right? Thanks Dan
Does 11/16 x 16 TPI sound right? Thanks Dan
- Fri Mar 08, 2024 1:55 pm
- Forum: General Discussion Forum
- Topic: HCCA TOUR Chattanooga???
- Replies: 7
- Views: 753
HCCA TOUR Chattanooga???
Is anyone on here going ? March 15-20. Should be some nice cars there. Dan
- Thu Mar 07, 2024 12:16 pm
- Forum: Classifieds - Parts
- Topic: FS - EGGE Pistons for Scat Stroker Build, .060 O/S
- Replies: 2
- Views: 314
Re: FS - EGGE Pistons for Scat Stroker Build, .060 O/S
Email sent.Dan
- Thu Mar 07, 2024 11:04 am
- Forum: General Discussion Forum
- Topic: ♾️ DAYS TILL CHICKASHA
- Replies: 59
- Views: 4616
Re: 8 DAYS TILL CHICKASHA 3-15-16-2024
How about yous guys going post pictures of what we missed by not going?
- Wed Mar 06, 2024 5:59 pm
- Forum: General Discussion Forum
- Topic: Do I really need a carb shut off valve?
- Replies: 14
- Views: 823
Re: Do I really need a carb shut off valve?
Question is: Is the valve bypassing and carb is leaking or is gas dripping from the valve?
Which ever one, FIX IT.
I once bought a T that burned down a house, new Caddy and a Motorhome.
FIX IT ASAP.
Which ever one, FIX IT.
I once bought a T that burned down a house, new Caddy and a Motorhome.
FIX IT ASAP.
- Tue Mar 05, 2024 4:50 pm
- Forum: General Discussion Forum
- Topic: Ford service bulletin
- Replies: 40
- Views: 9181
Re: Ford service bulletin
The MTFCI reproduction ones were very good. They were almost identical to the original. I got most of a set.
Got a bunch on originals. Including a cover. Dan
Got a bunch on originals. Including a cover. Dan
- Tue Mar 05, 2024 1:32 pm
- Forum: General Discussion Forum
- Topic: Ford service bulletin
- Replies: 40
- Views: 9181
Re: Ford service bulletin
A couple of years ago I was talking with the powers to be with the International about another run of the reprints. They don’t know what happened to the masters of the Service Bulletins reproductions.
Any of you guys got them ?
Any of you guys got them ?
- Fri Mar 01, 2024 3:41 pm
- Forum: General Discussion Forum
- Topic: 27 driving chassis, an I being cheap offering $1500?
- Replies: 24
- Views: 1188
Re: 27 driving chassis, an I being cheap offering $1500?
A frozen busted engine is a can of worms. Guy called me trying to sell me one with same story. I told him we were too far apart and he did not even say a price. I told all I knew for sure might be good were the 4 connecting rods, and only worth $10 each as cores. The rest could well be scrap. Have s...
- Fri Mar 01, 2024 3:31 pm
- Forum: General Discussion Forum
- Topic: Transmission brake drum
- Replies: 13
- Views: 908
Re: Transmission brake drum
Lugs were moved on the late 25 narrow and 26/27 wide drums.
Bolts are in lugs of the early narrow drums and not in lugs on the removable lug drums.
Look at some. Dan
Bolts are in lugs of the early narrow drums and not in lugs on the removable lug drums.
Look at some. Dan
- Tue Feb 27, 2024 4:14 pm
- Forum: General Discussion Forum
- Topic: T trans as a clutch how to?
- Replies: 8
- Views: 511
Re: T trans as a clutch how to?
Trussville
I have been to many antique auctions in Thorsby years ago.
I have been to many antique auctions in Thorsby years ago.
- Tue Feb 27, 2024 3:07 pm
- Forum: General Discussion Forum
- Topic: T trans as a clutch how to?
- Replies: 8
- Views: 511
Re: T trans as a clutch how to?
Since you are in Thorsby Ala, why not just ask Hank? If you email him I am sure he will tell you. Look him up in an old post.
He is only about 3 hrs northeast of you. A trip would be better. You might even end up buying his speedster!!! Dan
He is only about 3 hrs northeast of you. A trip would be better. You might even end up buying his speedster!!! Dan
- Mon Feb 26, 2024 6:50 pm
- Forum: General Discussion Forum
- Topic: Rekey Culm Ignition Switch
- Replies: 17
- Views: 959
Re: Rekey Culm Ignition Switch
Sounds like a job for Ben Martin.
- Sun Feb 25, 2024 10:25 am
- Forum: General Discussion Forum
- Topic: Fresh batch of armatures
- Replies: 5
- Views: 502
Re: Fresh batch of armatures
Tim that is what this forum needs more of.
Thanks for bringing a smile this morning. Dan
Thanks for bringing a smile this morning. Dan
- Sat Feb 24, 2024 12:29 pm
- Forum: General Discussion Forum
- Topic: What is this??
- Replies: 1
- Views: 323
What is this??
Anyone know what this is? Came in some T parts.
Thanks
Thanks
- Thu Feb 22, 2024 3:51 pm
- Forum: General Discussion Forum
- Topic: Headlamps
- Replies: 18
- Views: 913
Re: Headlamps
Just a general lamp question.
If you put LED electric bulbs in your lamps would really need reflectors?
If you put LED electric bulbs in your lamps would really need reflectors?
- Thu Feb 22, 2024 8:11 am
- Forum: General Discussion Forum
- Topic: Good selling price for a 1911?
- Replies: 23
- Views: 1471
Re: Good selling price for a 1911?
Check this one out !!!!
https://bids.auctionbypearce.com/auctio ... rd-model-t
https://bids.auctionbypearce.com/auctio ... rd-model-t
- Wed Feb 21, 2024 1:51 pm
- Forum: General Discussion Forum
- Topic: Ring Gear Screws
- Replies: 11
- Views: 698
Re: Ring Gear Screws
Paragraph 317. Last sentence.
Remember the old saying “ All else fails, Read the manual “
It should be named “Everything you ever wanted to know about a Model T but we’re afraid to ask”.
Remember the old saying “ All else fails, Read the manual “
It should be named “Everything you ever wanted to know about a Model T but we’re afraid to ask”.
- Wed Feb 21, 2024 1:03 pm
- Forum: General Discussion Forum
- Topic: 26/27 Ignition Switch
- Replies: 9
- Views: 708
Re: 26/27 Ignition Switch
Bill: Your neighbor Ben Martin is who you need to talk to. Dan
- Wed Feb 21, 2024 6:57 am
- Forum: Classifieds - Parts
- Topic: WTB FORD Times
- Replies: 1
- Views: 272
Re: WTB FORD Times
Got the information I wanted from the Times, but I still would like to find one.
- Tue Feb 20, 2024 6:18 pm
- Forum: General Discussion Forum
- Topic: Convert the Ruckstell housing
- Replies: 6
- Views: 599
Re: Convert the Ruckstell housing
Before you cut up the Ruckstell talk with Chaffins.
A few years ago I sent some out there to be made onto
Ruckstell. They could only use one cause the tube was too small to use.
They could also give you some pointers, think they have done a few. Dan
A few years ago I sent some out there to be made onto
Ruckstell. They could only use one cause the tube was too small to use.
They could also give you some pointers, think they have done a few. Dan
- Tue Feb 20, 2024 5:54 am
- Forum: Classifieds - Parts
- Topic: WTB FORD Times
- Replies: 1
- Views: 272
WTB FORD Times
Looking for a Ford Times Volume 4 No 2.
Email me at address in pictures Thanks Dan
Email me at address in pictures Thanks Dan
- Mon Feb 19, 2024 6:09 pm
- Forum: Classifieds - Parts
- Topic: FS WWI misc artifacts
- Replies: 1
- Views: 381
Re: FS WWI misc artifacts
Email sent. Thanks Dan
- Fri Feb 16, 2024 7:05 am
- Forum: Classifieds - Parts
- Topic: New Transmission Shaft FS
- Replies: 6
- Views: 840
Re: New Transmission Shaft FS
Back to the top
- Thu Feb 15, 2024 4:04 am
- Forum: General Discussion Forum
- Topic: Terminal Strips
- Replies: 6
- Views: 669
Re: Terminal Strips
Larry that is north of the Mason Dixon line.
- Wed Feb 14, 2024 10:29 pm
- Forum: General Discussion Forum
- Topic: Terminal Strips
- Replies: 6
- Views: 669
Re: Terminal Strips
Those are for the metal fire wall cars . I think that is to be sure the wood screws won’t touch the firewall. The thinner ones are for wood firewalls.
- Wed Feb 14, 2024 2:42 pm
- Forum: General Discussion Forum
- Topic: Rebabbited Rods source??
- Replies: 4
- Views: 549
Rebabbited Rods source??
Looking for some that rebabbited rods. Does anyone know a good source? Need several sets. Have cores, Will ship.
I know the vendors have them, looking for someone that does it. Heard of someone in PA, anyone have contact info. Please send it to me by email. Thanks Dan.
I know the vendors have them, looking for someone that does it. Heard of someone in PA, anyone have contact info. Please send it to me by email. Thanks Dan.
- Tue Feb 13, 2024 4:38 pm
- Forum: Classifieds - Parts
- Topic: NOS Touring Rear Fender mounts FS
- Replies: 5
- Views: 519
Re: NOS Touring Rear Fender mounts FS
Back to the top
- Tue Feb 13, 2024 4:38 pm
- Forum: Classifieds - Parts
- Topic: Rear end carrier FS new price
- Replies: 5
- Views: 685
Re: Rear end carrier FS new price
Back to the top
- Tue Feb 13, 2024 4:37 pm
- Forum: Classifieds - Parts
- Topic: New Transmission Shaft FS
- Replies: 6
- Views: 840
Re: New Transmission Shaft FS
Back to the top
- Tue Feb 13, 2024 4:37 pm
- Forum: Classifieds - Parts
- Topic: Early Transmission Cover Oiler FS new price
- Replies: 5
- Views: 699
Re: Early Transmission Cover Oiler FS new price
Back to the top
- Tue Feb 13, 2024 4:36 pm
- Forum: Classifieds - Parts
- Topic: New batch of Stevens insert ready FS
- Replies: 65
- Views: 4537
Re: New batch of Stevens insert ready FS
Back to the top
- Tue Feb 13, 2024 2:44 pm
- Forum: General Discussion Forum
- Topic: What the is this???
- Replies: 2
- Views: 465
Re: What the is this???
That makes cents, the guy was a Model A guy too. Thanks
- Tue Feb 13, 2024 2:00 pm
- Forum: General Discussion Forum
- Topic: Terminal Strips
- Replies: 6
- Views: 669
Terminal Strips
Was looking in wiring drawer and saw these. Thought yous guys would like to see some original terminal strips. Most are NOS. The five space one has the word bat on one. Dan
- Tue Feb 13, 2024 1:47 pm
- Forum: General Discussion Forum
- Topic: What the is this???
- Replies: 2
- Views: 465
What the is this???
Anyone know what these are? Came with a restored 27 Touring. In the extra stuff box. I don’t see where they could go.
The bolt is 5/16” NC. Over all length is about 1”. Head is zinc?
Thanks Dan
The bolt is 5/16” NC. Over all length is about 1”. Head is zinc?
Thanks Dan
- Tue Feb 13, 2024 10:06 am
- Forum: General Discussion Forum
- Topic: Hyatt Bearings (almost)
- Replies: 39
- Views: 2394
Re: Hyatt Bearings (almost)
Art I was hoping someone would jump in and make them for $150 each so my 5 gal bucket full of used ones would double in price from $5.00 each to $10.00 each.
- Mon Feb 12, 2024 3:08 pm
- Forum: General Discussion Forum
- Topic: Hyatt Bearings (almost)
- Replies: 39
- Views: 2394
Re: Hyatt Bearings (almost)
The demand will depend on the price.
Everybody wants a rebuilt front axle till I tell them the cost. Then they say they will just go find a good one for $10.
Everybody wants a rebuilt front axle till I tell them the cost. Then they say they will just go find a good one for $10.
- Mon Feb 12, 2024 6:50 am
- Forum: General Discussion Forum
- Topic: Hyatt Bearings (almost)
- Replies: 39
- Views: 2394
Re: Hyatt Bearings (almost)
USA office is in Covington GA.
- Sat Feb 10, 2024 4:04 pm
- Forum: Classifieds - Parts
- Topic: FS: NOS Jahns Std Pistons
- Replies: 2
- Views: 377
Re: FS: NOS Jahns Std Pistons
Email sent
- Sat Feb 10, 2024 3:54 pm
- Forum: General Discussion Forum
- Topic: Water Jacket Crack Advice
- Replies: 20
- Views: 1276
Re: Water Jacket Crack Advice
There was a how in one of the Ford Owner and Dealer magazines on soldering cracks with lead. I have done it a few times with success. I also have used lock n stitch too. Most blocks are too thin there due to core shift. Too Hugh Jass is not still around to tell us how they would fix that with MBRT. 😎
- Sat Feb 10, 2024 8:58 am
- Forum: General Discussion Forum
- Topic: Open trailering poll
- Replies: 25
- Views: 1152
Re: Open trailering poll
Google “Uhaul sell used trailer “ see what you get.
- Fri Feb 09, 2024 10:56 am
- Forum: Classifieds - Parts
- Topic: FS: Columbo Cross Drive Magneto Attachment
- Replies: 5
- Views: 671
Re: FS: Columbo Cross Drive Magneto Attachment
FYI yous guys. On AACA classified there were some 4 cly mags that would work with this drive. One was a nice DU4.
- Thu Feb 08, 2024 11:02 am
- Forum: General Discussion Forum
- Topic: Waukesha Ricardo Head differences
- Replies: 4
- Views: 481
Re: Waukesha Ricardo Head differences
Just a swag but the one with priming holes is early?
I have no proof, but I would think that the priming holes would be removed in later production. Dan
I have no proof, but I would think that the priming holes would be removed in later production. Dan
- Thu Feb 08, 2024 6:42 am
- Forum: Classifieds - Parts
- Topic: NOS Carrier bolts FS
- Replies: 0
- Views: 298
NOS Carrier bolts FS
Got some NOS Rear end carrier bolts for sale. $10 a set of 3 + shipping. Email me at address in pictures. Thanks Dan
- Wed Feb 07, 2024 1:49 pm
- Forum: General Discussion Forum
- Topic: T trailering question
- Replies: 40
- Views: 1983
Re: T trailering question
Better idea is to check the size of the horse that is pulling the wagon. Not how much s&@t the wagon will hold.
- Wed Feb 07, 2024 3:23 am
- Forum: Classifieds - Parts
- Topic: In Search of a Clutch Disc Inner Drum
- Replies: 6
- Views: 487
- Tue Feb 06, 2024 11:57 am
- Forum: Classifieds - Parts
- Topic: In Search of a Clutch Disc Inner Drum
- Replies: 6
- Views: 487
Re: In Search of a Clutch Disc Inner Drum
Early or late? Email me. Dan
- Tue Feb 06, 2024 1:07 am
- Forum: Classifieds - Parts
- Topic: New batch of Stevens insert ready FS
- Replies: 65
- Views: 4537
Re: New batch of Stevens insert ready FS
Back to the top
- Tue Feb 06, 2024 1:06 am
- Forum: Classifieds - Parts
- Topic: Early Transmission Cover Oiler FS new price
- Replies: 5
- Views: 699
Re: Early Transmission Cover Oiler FS new price
Back to the top
- Tue Feb 06, 2024 1:06 am
- Forum: Classifieds - Parts
- Topic: New Transmission Shaft FS
- Replies: 6
- Views: 840
Re: New Transmission Shaft FS
Back to the top
- Tue Feb 06, 2024 1:06 am
- Forum: Classifieds - Parts
- Topic: Cast Iron Steering Center FS NEW PRICE
- Replies: 12
- Views: 890
Re: Cast Iron Steering Center FS NEW PRICE
Back to the top
- Tue Feb 06, 2024 1:05 am
- Forum: Classifieds - Parts
- Topic: Rear end carrier FS new price
- Replies: 5
- Views: 685
Re: Rear end carrier FS new price
Back to the top
- Tue Feb 06, 2024 1:03 am
- Forum: Classifieds - Parts
- Topic: NOS Touring Rear Fender mounts FS
- Replies: 5
- Views: 519
Re: NOS Touring Rear Fender mounts FS
Back to the top
- Mon Feb 05, 2024 7:02 pm
- Forum: General Discussion Forum
- Topic: Rustoleum farm implement paint for block/head/pan?
- Replies: 11
- Views: 1006
Re: Rustoleum farm implement paint for block/head/pan?
What is wrong with engine paint?
- Mon Feb 05, 2024 5:17 pm
- Forum: General Discussion Forum
- Topic: Magneto Field Coil Dimension
- Replies: 3
- Views: 333
Re: Magneto Field Coil Dimension
Check your email. Dan