MTFCA Forum

Craig Raynor

I used the 100 drywall screw method this worked well with a little tip from an older friend. He suggested using some line and make a cradle to hang the tank from a tree limb in order to help with the arthritis issue . - Craig

Craig Raynor

email sent

Craig Raynor

I will take it Ed and will send a email --Craig

Craig Raynor

Email sent Thanks Tim

Craig Raynor

Here is a few picture of George’s Ambulance

Craig Raynor

Hi John, As John Biggs stated above George King has a WW 1 ambulance and has recently decide to sell it. I realize your post states your desire to build one so this maybe out order here but just thought I would pass this on to you in the event you might want to take a huge short cut. Please message ...

Craig Raynor

Thank You Frank for the old posts they both are very helpful. I am sure this has been said here many times , this forum is the most valuable thing for my dollar on the internet , Thank you to all that make this happen for all of us!

Craig Raynor

Great pictures and it’s always a good day to learn something new especially when it’s T related.

Craig Raynor

Sorry to hear of his passing Bob, my condolences.

Craig Raynor

Donnie could you discribe the fan bracket? I will be going back to the collection this Sunday and will spend some time looking for it.

Craig Raynor

I saw this on the classified adds here and would like to know if the cam gear requested in the add is the same needed for this mag set up?

Craig Raynor

I have a couple more of the early radius rods and was thinking what is an acceptable amount of wear?

Craig Raynor

Craig Raynor

Could this set up be used on a T?

Craig Raynor

Welcome Rachael and congratulations!

Craig Raynor

Thank you Allan I have a couple more of these early radius rods and we will be considering selling a few of the finished product if there is a market for them, and a price that’s fair to both parties.

Craig Raynor

Thank You David I have been contemplating how to go about working with these two different metals. I will be trying your idea of silver brazing them together this weekend.We also have discussed drilling and pining the ball in place once we are sure of the correct location for It along the newly mill...

Craig Raynor

Nice picture and poem best part is she is still smiling !

Craig Raynor

Thanks for the replies! We cut this this morning and we’re going to pin the ball. After reading through the answers above we will weld it as well. Would anyone here have experience doing this and how it holds up over time/miles?

Craig Raynor

Hello All my friend and I were going to attempt to replace the ball on a early front radius rod. We are thinking to cut the old one away on the milling machine drill hole in a inch and a quarter stainless ball barring. I can imagine some here must have tried this, and if not I still would like to he...

Craig Raynor

Are these still available? If so I would like to purchase them.

Craig Raynor

This picture was taken the day we bought our T.My wife ,Amy,is in the dark green and the third owner, Anne, is in the light green. E7534EA3-F26F-4F53-8AD8-EEBA5D65D7A2.jpeg This car was bought in 1915 by Mr Harris C. Fahnestock and his wife Mable E. Metcalf for their estate in Lenox Massachusetts Th...

Craig Raynor

Thanks I will do exactly that a test,I do appreciate your help very much.—Craig

Craig Raynor

Great to see this young man still enjoying his model T.

Craig Raynor

I feel lucky to be close enough that I can make it there in one day from my home.Great people and lots of information best of all the basement full of used parts!

Craig Raynor

Thanks to all who replied here I believe all of it to be great information. I live on Long Island NY very close to Montauk point.I spoke with two local boat yard owners and would like to work with Epifans, if one question could be answered, to Kaiser,have you ever painted enamel over this product? T...

Craig Raynor

I am building a 15 model T based ALF fire truck and the bed is made of white oak. I was told today that white oak is difficult to get paint to adhere too. Any truth to this? Any one have experience painting white oak?This is a picture of the hose bed on it end. Thanks!

Craig Raynor

It’s the great people involved with Model Ts that lead me to purchase one.I have owned collecter cars starting in 1983 with my first one, a 1955 Chevy Nomad.I must say it’s the Model T community that has been the best all around group of folks to associate/work with weather for help with technical a...

Craig Raynor

So sorry to hear of your great loss!Our family will have yours in our dinner prayers.

Craig Raynor

Thank you for the information

Craig Raynor

He drive truck cross country and didn’t want to get caught if the need arises.So this sounds like like something that was passed into law wondering if it’s actually enforced at this time?

Craig Raynor

I just had my son who is a truck driver ask if I knew of a law in Sacramento County that states you cannot work on your own auto is this true? Also is it enforced?

Craig Raynor

I will take 10 spindle washers pm sent

Craig Raynor

Like Ralph I had mine complete 15 Canadian engine done with Pat in Connecticut ,very easy to talk and keeps you up to date about the project.He spent four years earning a degree at Mc Pherson college in Kansas in vehicle restoration. He also did an internship with George King who operated Connecticu...

Craig Raynor

I my 15 Canadian touring has the original radiator in it this picture shows the stamped numbers and it had engine number C631_ _. I also found these body numbers stamped on body the inside drivers door. Hope you find this helpful.

Craig Raynor

That video of the kids receiving the car body and giving credit to all those who helped along the way is exactly why I continue with my interest in the model T part of the collector car hobby. I started in the car hobby in 1983 with a 1955 Chevy Nomad power pack car. Like many people here I have had...

Craig Raynor

Thanks for the replies and the link to the old posts was interesting. I was at Bill Calimers shop yesterday and he was unsure who’s mark this is as well. Still somewhat new to the Modle T and always looking to learn anything about them.

Craig Raynor

I sandblasted a couple of hubs and found this mark on the inside of one. I asked a friend he has not seen it eather.Any thought on who or what company may have used this Mark?

Craig Raynor

Need to make one of those glad you posted that because I need to do that for both cars.

Craig Raynor

Thanks for the help!

Craig Raynor

Did not mean to move in on this thread but I do want to say here that I plan a trip up to Lang’s for some other parts but I will definitely pick up the recommendation made here for rear end fluid.

Craig Raynor

I was wondering that also how much but also what?I am going to rebuild a 15 rear axel later this month. I spent yesterday cleaning and getting the sand ready for sandblasting. I was wondering what’s the best gear oil to put into it I was told once a while back that this was the right stuff. What do ...

Craig Raynor

Good people who know the model T and willing to help in a most honest way. I have been in and out of the hobby since 1983 and these folks have always been a great help.
I am planning on a trip to there store(large collection of used T parts in the basement

) next week.

Craig Raynor

Congratulations that’s a great moment and shared with your son makes its even more special!

Craig Raynor

Email sent thank you Scott for this opportunity

Craig Raynor

I would like to buy three rear rims for our 15 T 30”x3-1/2”Thanks!

Craig Raynor

Merry Christmas and Happy Hanukkah to all who celebrate.These pages have provided a tremendous amount of help for me and just want to take this opportunity to say thank you to all of those who make this website a great place for learning and help for those of us in need.

Craig Raynor

Threads and key ways are very good $25 for both right and left plus postage to your address.

Craig Raynor

Thanks MTFCA

Craig Raynor

Still for sale

Craig Raynor

Craig Raynor

Right and left spindles both have good threads and key ways sandblasted and primed,shipping cost will be determined by your address and additional to the $100.00 cost for both.

Craig Raynor

[image][/image][attachment=0]3CBC8F76-7013-469F-B

Craig Raynor

Sold pending payment,Email sent Michael

Craig Raynor

For Sale 1 pair of early front spring shackles. All threads are in good shape $100 plus shipping cost.

Craig Raynor

Sorry for your loss what a great way to get him home!

Craig Raynor

Finding this hard to believe but if the weather man said so it must be true

Craig Raynor

Joe , that is correct about asbestos “just leave it alone and no one gets hurt “ were his exact words.Its when is “friable” or air borne that it becomes a problem.

Burger, yes to the addiction issue it seems to be a big problem for my wife - the model T

Craig Raynor

While growing up with my three brothers we lived next store to a older guy who was a family friend as was most every one in our neighborhood.He was a retired plumber, we would run around his property and play hid and seek in his barn. In the barn was all of his plumbing supplies including a wooden b...

Craig Raynor

I have camped at the Hershey Highmeadow campground before clean and close with a free shuttle.717-534-8999give them a call they had open spaces last year.

Craig Raynor

John Kushan I would agree with you on this because it has the mounting bolts inside. I picked it up at a friends house he is selling off his fathers collection.I brought a friend, George King to see a vehicle,he bought it and has started to get it ready for Hershey show field-HPOF.He has some T stuf...

Craig Raynor

Thanks for the information thinking I will sell it.

Craig Raynor

A few more pictures

Craig Raynor

Any one here have an idea if this was something originally sold from Ford on a production car? If yes of what year/years this would be found on?[image][/image]

Craig Raynor

I bought a 15 Canadian touring car three years ago and have done some research and would agree with you.

Craig Raynor

This event looks like a great time and I now have my wife interested in attending next year. Where would we find information on registration? The picture is of my dad and I in our Fourth of July parade.

Craig Raynor

I will take them and will send you a pm

Craig Raynor

Red field (near Lang’s location )RCC 33&34 most of the parts 1910-1919 I will be getting a list together over the coming weeks. The 1900 Orient in on of the pictures is sold these shots are from 2 of four barns that contain T parts as well as other parts all of which we will be bringing. 50+ Magneto...

Craig Raynor

Craig Raynor

Great to see you back on the road again! I hope you can make it out to Southampton this October for the tour I put together.

Craig Raynor

Just want to be clear this block is NOT had any work done to it

Craig Raynor

I have a 13 short block I am bringing to Hershey red section spots RCC 33&34

Craig Raynor

Nice looking car congratulations!

Craig Raynor

Craig Raynor

I would like to purchase 2- #8 side lights not #9 tail light Thanks

Craig Raynor

Looking for 2 side lights for my Canadian 15 touring. Willing to pay your price for good set.

Craig Raynor

Craig Raynor

Wanted for my 15 Canadian touring car a set of CLASCO side and 1 tail light, thanks , Craig (sorry about the picture being upside down) call or text- six 31 -Nine 05 -4634

Craig Raynor

The American Indians preferred Orange Osage to all other for the bows. Any traditional bow shaper will gladly pay for a piece 7 foot long with no knots. I had learned this a few years ago when I was asked to make a “hot box” for friend of my coworker. The insulated box had 5 porcelain lamp holder fo...

Search found 79 matches