Search found 90 matches
- Sun Dec 24, 2023 9:30 am
- Forum: General Discussion Forum
- Topic: Twin spark 4 banger
- Replies: 6
- Views: 745
Twin spark 4 banger
Trying to help a friend find a suitable distributor for his dual spark 4 cylinder engine. I have a cap that was used on 1929 Graham, 1929 Kissel and 1928-29 Studebaker. This cap was also used on dual spark model T Fords with Rajo and Frontenc and other speed heads. Question is, what Delco distributo...
- Thu Dec 21, 2023 8:18 pm
- Forum: Classifieds - Parts
- Topic: Wanted: Atwater Kent
- Replies: 3
- Views: 286
Re: Wanted: Atwater Kent
Yes I have CA parts. contact me at the email address above.
Tom
Tom
- Sun Sep 17, 2023 9:27 am
- Forum: General Discussion Forum
- Topic: Post Your 2023 Hershey Spaces and Goods on Offer Here!
- Replies: 43
- Views: 4278
Re: Post Your 2023 Hershey Spaces and Goods on Offer Here!
We will be there with a trailer full of ignition parts for most makes and models from 1910 to 1960. We'll have parts for the clip on distributors that fit the model T Ford as well. Makes include Bosch, Delco, Atwater Kent, Autolite and Thomas. Other parts we'll have are point sets, distributor caps,...
- Sat Sep 02, 2023 8:59 am
- Forum: General Discussion Forum
- Topic: Looking for Stevens Front Axle tool owners
- Replies: 20
- Views: 1073
Re: Looking for Stevens Front Axle tool owners
I have an original in eastern Nebraska.
- Mon Aug 21, 2023 10:08 pm
- Forum: General Discussion Forum
- Topic: New London to Brighton Iowa tour
- Replies: 10
- Views: 798
Re: New London to Brighton Iowa tour
We have been on this tour about 9 or 10 times. Great people that put it on and very interesting stops along the way on the pre tours. Need I mention ice cream on several tours and not the great amount of traffic on the NLNB tour, country two lane roads. Saturday they have a flag burning ceremony in ...
- Sun Aug 06, 2023 9:39 am
- Forum: General Discussion Forum
- Topic: Distributor ID
- Replies: 2
- Views: 353
Re: Distributor ID
Need to see the points for sure, but looks Delco
- Thu May 25, 2023 8:35 am
- Forum: General Discussion Forum
- Topic: Pertronics in an Atwater-Kent LA
- Replies: 10
- Views: 800
Re: Pertronics in an Atwater-Kent LA
I have a bunch of rotors, points and distributor caps for those AK distributors. Everything is NOS
- Sun Apr 23, 2023 10:29 pm
- Forum: General Discussion Forum
- Topic: Bosch distributor cap project
- Replies: 10
- Views: 1752
Re: Bosch distributor cap project
Jerry, not enough interest in reproducing the Bosch caps at this time. Obviously, cost will be determined by the number that are made. On another note, the "Buick 6" caps that you mentioned are made in Germany, they are and extremely high quality cap, made of Bakelite with brass contacts. I have the...
- Mon Apr 17, 2023 5:43 pm
- Forum: Classifieds - Parts
- Topic: Bosch style dist. Fs. Sold
- Replies: 7
- Views: 849
Re: Bosch style dist. Fs
Atwater Kent never made a plate like that, it's all Ford
- Thu Feb 02, 2023 9:13 am
- Forum: General Discussion Forum
- Topic: What do you plan to do to your T in February?
- Replies: 4
- Views: 650
What do you plan to do to your T in February?
I have new parts for a Ruckstell than I am building. I've had the parts since last September and my wife said it's time to put it together.
- Thu Jan 26, 2023 6:19 pm
- Forum: General Discussion Forum
- Topic: T going down hill
- Replies: 29
- Views: 2383
Re: T going down hill
I looked more closely at the drivers hands. You can clearly see his fingers and knuckles are WHITE with fear!!!!!!!!!!!!!!
- Sun Jan 15, 2023 9:47 am
- Forum: General Discussion Forum
- Topic: American Bosch Magneto Corp
- Replies: 19
- Views: 1777
Re: American Bosch Magneto Corp
TRDxB2, the rotor in the picture is the correct rotor with the T on the spark contact end. It is not however the LL54. The LL54 has a much larger mounting hole than the one with the T on the end, it will not work and will be very sloppy. In your post of Jan 13th you do show the correct point set and...
- Sat Jan 14, 2023 9:56 pm
- Forum: General Discussion Forum
- Topic: American Bosch Magneto Corp
- Replies: 19
- Views: 1777
Re: American Bosch Magneto Corp
Still can't get pictures to load)(*&^%$#@#$%^&*()_
- Sat Jan 14, 2023 11:50 am
- Forum: General Discussion Forum
- Topic: American Bosch Magneto Corp
- Replies: 19
- Views: 1777
Re: American Bosch Magneto Corp
[image][/image]
- Sat Jan 14, 2023 11:47 am
- Forum: General Discussion Forum
- Topic: American Bosch Magneto Corp
- Replies: 19
- Views: 1777
Re: American Bosch Magneto Corp
I have been watching this post and need to step in. Paul, the rotor you have is not the Bosch LL 41, but rather an Autolite IB 1048. That particular rotor was used on the 1926 to 1928 Essex ONLY. The LL41 rotor does not have the center spring contact like your rotor. While it may have the same mount...
- Wed Nov 16, 2022 10:12 pm
- Forum: General Discussion Forum
- Topic: P Head ?
- Replies: 16
- Views: 2189
Re: P Head ?
P head???????????? Did I miss something during the last few years?
- Tue Sep 20, 2022 9:10 am
- Forum: General Discussion Forum
- Topic: Another look
- Replies: 9
- Views: 1294
Re: Another look
Tom, I don't know where you find all these pictures, but keep posting them. Many of us really enjoy them. GREAT job
- Mon Sep 19, 2022 9:16 am
- Forum: General Discussion Forum
- Topic: AACA Hershey Fall Meet Tues Oct 4 –Fri, Oct 7 2022
- Replies: 32
- Views: 4604
Re: AACA Hershey Fall Meet Tues Oct 4 –Fri, Oct 7 2022
We will be there again in C4N 30-32 with NOS ignition parts for the clip on T Ford distributors. Will also have ignition parts for most makes and models from 1910 to 1960
- Mon Aug 29, 2022 7:16 pm
- Forum: Classifieds - Parts
- Topic: WTB American Bosch Distributor Parts
- Replies: 26
- Views: 2710
Re: WTB American Bosch Distributor Parts
Condenser - try again
- Sun Aug 28, 2022 10:07 pm
- Forum: Classifieds - Parts
- Topic: WTB American Bosch Distributor Parts
- Replies: 26
- Views: 2710
Re: WTB American Bosch Distributor Parts
[image][/image]3rd try on the condenser
- Sun Aug 28, 2022 1:23 pm
- Forum: Classifieds - Parts
- Topic: WTB American Bosch Distributor Parts
- Replies: 26
- Views: 2710
Re: WTB American Bosch Distributor Parts
darn condenser won't load
- Sun Aug 28, 2022 1:22 pm
- Forum: Classifieds - Parts
- Topic: WTB American Bosch Distributor Parts
- Replies: 26
- Views: 2710
Re: WTB American Bosch Distributor Parts
picture of the condenser
- Sun Aug 28, 2022 1:21 pm
- Forum: Classifieds - Parts
- Topic: WTB American Bosch Distributor Parts
- Replies: 26
- Views: 2710
Re: WTB American Bosch Distributor Parts
I have NOS point sets, rotors, resistance units and condensers available for the Bosch units. As mentioned before, no caps available at this time. Thinking about reproducing them, but still not enough interest. Included is pictures of the resistance unit and the condenser (if I finally got them loaded
- Fri Aug 26, 2022 10:43 pm
- Forum: Classifieds - Parts
- Topic: WTB American Bosch Distributor Parts
- Replies: 26
- Views: 2710
Re: WTB American Bosch Distributor Parts
Bryant, I have them NOS contact me again Tom
- Sat Aug 13, 2022 9:08 am
- Forum: Classifieds - Parts
- Topic: WTB American Bosch Distributor Parts
- Replies: 26
- Views: 2710
Re: WTB American Bosch Distributor Parts
Bryant, see my post in the General discussion regarding these dist caps.
- Sat Aug 13, 2022 9:06 am
- Forum: General Discussion Forum
- Topic: Bosch distributor cap project
- Replies: 10
- Views: 1752
Bosch distributor cap project
Noticed that someone is looking for a distributor cap to fit the Bosch Type 600 on the parts forum. These caps have been hard to find in good condition for some time now. I have a nice NOS one that I have been holding back to be used as a pattern for reproducing them at some point in time. There is ...
- Sun Aug 07, 2022 5:42 pm
- Forum: Classifieds - Parts
- Topic: dist. cap
- Replies: 7
- Views: 1163
Re: dist. cap
newer Bosch
- Sun Aug 07, 2022 9:33 am
- Forum: Classifieds - Parts
- Topic: dist. cap
- Replies: 7
- Views: 1163
Re: dist. cap
Picture would help a LOT
- Sat Aug 06, 2022 10:01 pm
- Forum: Classifieds - Parts
- Topic: dist. cap
- Replies: 7
- Views: 1163
Re: dist. cap
for the new Bosch or the old Bosch distributor? Picture would help a lot. If it is for the old bosch, I will take it.
- Fri Aug 05, 2022 11:43 am
- Forum: Classifieds - Parts
- Topic: WTB Bosch Magneto Parts
- Replies: 3
- Views: 656
Re: WTB Bosch Magneto Parts
It appears rusting in the photo, but it isn't
- Fri Aug 05, 2022 11:42 am
- Forum: Classifieds - Parts
- Topic: WTB Bosch Magneto Parts
- Replies: 3
- Views: 656
Re: WTB Bosch Magneto Parts
Three pedal, I have one. contact me Tom tsvanmeet@gmail.com not sure photo uploaded
- Mon Jul 04, 2022 7:15 am
- Forum: Classifieds - Parts
- Topic: FS: 3 to 1 Ring and Pinion still Available
- Replies: 3
- Views: 972
Re: FS: 3 to 1 Ring and Pinion
PM sent, I will take them
- Sat Apr 16, 2022 8:46 am
- Forum: General Discussion Forum
- Topic: 2022 Bakersfield Swap Meet, April 23 & 24, in Tulare CA.
- Replies: 51
- Views: 7656
Re: 2022 Bakersfield Swap Meet, April 23 & 24, in Tulare CA.
We will be at Tulare swap meet too. We vend ignition parts from 1910 to 1960 and will be in space J49. The price of diesel dictates that will not have out usual vending trailer full of items but rather just a small sample of the products we do have, ie, point sets, rotors and distributor caps. Soooo...
- Sun Mar 06, 2022 11:34 pm
- Forum: General Discussion Forum
- Topic: Another time and place
- Replies: 26
- Views: 2338
Re: Another time and place
Love those pictures!!!!!!!!!!!!!! My wife gases gophers and moles with the Tahoe like in the third photo. She thought it was a new idea
- Thu Feb 17, 2022 8:37 am
- Forum: General Discussion Forum
- Topic: 100 yrs ago-give or take.
- Replies: 26
- Views: 2371
Re: 100 yrs ago-give or take.
Keep em coming, love those old pictures, especially the town scenes and the insides of the repair shops. If they could only talk!
- Mon Feb 14, 2022 9:31 pm
- Forum: General Discussion Forum
- Topic: T’s around the country
- Replies: 19
- Views: 2110
Re: T’s around the country
GREAT pictures Tom. I don't know where you find them all but keep em coming. I enjoy them immensely!!!!!!!!!
- Sun Jan 30, 2022 7:21 am
- Forum: General Discussion Forum
- Topic: Another look at trucks
- Replies: 28
- Views: 2521
Re: Another look at trucks
I haven't been back to this little town in years but remember a guard rail about the statue to protect it from certain death so to speak. there used to be a large building on the corner similar to the photo but it was burned in a fire I think in the late 60's. sure brings back memories however.
- Sat Jan 29, 2022 8:50 am
- Forum: General Discussion Forum
- Topic: Another look at trucks
- Replies: 28
- Views: 2521
Re: Another look at trucks
I believe the photo with the WWI display was taken in Hospers, Iowa. My grandfather on my mothers side, served in WWI and was supposed to have spearheaded (according to family history) the drive to get that statue erected. I believe it still stands in the middle of the intersection there to this day.
- Thu Jan 20, 2022 7:16 am
- Forum: General Discussion Forum
- Topic: Pate
- Replies: 14
- Views: 2622
Re: Pate
We went two or three years ago. Total waste of time and money
- Thu Nov 18, 2021 9:36 am
- Forum: General Discussion Forum
- Topic: Modern coil wiring
- Replies: 8
- Views: 1345
Re: Modern coil wiring
Modern coils sometimes come with built in resistance. Check with your parts house and they should be able to tell you how many ohms of resistance are built into the coil.
- Thu Sep 09, 2021 7:16 am
- Forum: General Discussion Forum
- Topic: Post your 2021 Hershey Swap Spaces Here!
- Replies: 33
- Views: 5619
Re: Post your 2021 Hershey Swap Spaces Here!
We are in C4N 30-33, very close to the MTFCA spaces - C4Q 34-37. Stop by and visit for a while, we will have replacement ignition parts for all the aftermarket clip on distributors for the model T. Also available will be distributor caps, rotors, point sets, brushes etc for most makes and models of ...
- Mon Sep 06, 2021 9:29 am
- Forum: General Discussion Forum
- Topic: Connecticut Timer
- Replies: 23
- Views: 3308
Re: Connecticut Timer
After looking and thinking about this timer/distributor cap for a few days and reviewing PeterN's patent app papers and the drawing, I have come to the following conculsion. It is definitely a high tension distributor cap and not a low tension timer. The patent application paper refers to the open w...
- Sun Sep 05, 2021 8:47 am
- Forum: General Discussion Forum
- Topic: Connecticut Timer
- Replies: 23
- Views: 3308
Re: Connecticut Timer
I will bring it with me to Hershey for the experts to look at. C4N 30-32
- Sat Sep 04, 2021 9:52 pm
- Forum: General Discussion Forum
- Topic: Connecticut Timer
- Replies: 23
- Views: 3308
Re: Connecticut Timer
The unit is about 3" tall. The rotor has a metal contact piece that rubs on the carbon button inside the cap to provide a ground path which is eventually grounded to the frame through the top center knob where a fifth wire to ground is attached. The inside of the rotor has the little notch for the c...
- Sat Sep 04, 2021 4:15 pm
- Forum: General Discussion Forum
- Topic: Connecticut Timer
- Replies: 23
- Views: 3308
Connecticut Timer
I just picked up this Connecticut timer and rotor and have never seen another one like it. Does anyone have any information on this unit?
- Thu Sep 02, 2021 9:21 am
- Forum: General Discussion Forum
- Topic: AK, Bosch, Delco aftermarket distributors at Hershey
- Replies: 1
- Views: 703
Re: AK, Bosch, Delco aftermarket distributors at Hershey
[image]
[/image]- Thu Sep 02, 2021 9:18 am
- Forum: General Discussion Forum
- Topic: AK, Bosch, Delco aftermarket distributors at Hershey
- Replies: 1
- Views: 703
AK, Bosch, Delco aftermarket distributors at Hershey
We plan to be at Hershey and will have for sale many consumable parts for the aftermarket distributors like Atwater Kent, Bosch, Delco, Autolite, Thomas and lesser known others. Check with us at C4N 30-33. We'll also have ignition parts for most other makes and models from 1910 to 1960.
- Sun Aug 29, 2021 9:39 pm
- Forum: Classifieds - Parts
- Topic: No Name clip-on distributor FS
- Replies: 3
- Views: 1363
Re: No Name clip-on distributor FS
Remy cap, Wagner point set Interesting!!!!!!!!!!!!!
- Wed Aug 25, 2021 8:33 am
- Forum: General Discussion Forum
- Topic: Twisted rod?
- Replies: 5
- Views: 1603
Re: Twisted rod?
We had a similar knock in a fresh engine for a customer several years ago, it sounded like a diesel engine with the knock. We had the engine in and out 4 times with a complete tear down each time. Turned out to be a rod problem. Herm Koenke was the one that finally diagnosed the problem and correcte...
- Tue Jul 27, 2021 5:16 am
- Forum: General Discussion Forum
- Topic: 26 engine replacement
- Replies: 13
- Views: 2186
26 engine replacement
Is is possible to put a 26 engine back into the car with the transmission cover and pedals all attached? A guy brought me a 26 engine all assembled and wants it back in the car but has the trans cover and all attached. Body is a coupe body.
- Sun Jun 27, 2021 8:50 am
- Forum: Classifieds - Parts
- Topic: WTB Parts for a Stephens Six !Possible Source Found!
- Replies: 20
- Views: 3244
Re: WTB Parts for a Stephens Six !Possible Source Found!
Just checked my parts books and I have ignition parts for the Stephens but need to know the YOM. In 1917 and in 1920 -1922 they used the Conneticut system. Late in 1917 thru 191 they used Delco. In late 1922 to 1924 they used both Delco and Autolite. I have all the parts listed for point sets, distr...
- Thu May 06, 2021 1:53 pm
- Forum: General Discussion Forum
- Topic: Stan Howe contact info
- Replies: 2
- Views: 1155
Stan Howe contact info
Could someone please give me Stan Howe's contact info? Thank you in advance
- Tue Apr 13, 2021 10:38 pm
- Forum: General Discussion Forum
- Topic: Weaver axle stand
- Replies: 6
- Views: 1709
Re: Weaver axle stand
Mark, yes it is the axle stand in your posted site. Thank you for the info.
- Tue Apr 13, 2021 8:12 am
- Forum: General Discussion Forum
- Topic: Weaver axle stand
- Replies: 6
- Views: 1709
Re: Weaver axle stand
http://www.mtfca.com/discus/messages/41 ... 1397017663 Yes there is a picture of that stand about half way down on this post. Anyone have any information on it. The price was really right! Tried again this morning to post pictures )*&^%^&*()*&^%^&*
- Mon Apr 12, 2021 8:57 pm
- Forum: General Discussion Forum
- Topic: Weaver axle stand
- Replies: 6
- Views: 1709
Re: Weaver axle stand
)(*&^%$%^&*()_ can't load a picture of the stand
- Mon Apr 12, 2021 8:55 pm
- Forum: General Discussion Forum
- Topic: Weaver axle stand
- Replies: 6
- Views: 1709
Weaver axle stand
I picked up a Weaver axle stand at a local swap meet on Sunday. Tried looking up the model that I have and all I was able to find is the more deluxe version made by Weaver. does anyone have any factory or information on this model?
- Thu Mar 25, 2021 9:31 am
- Forum: General Discussion Forum
- Topic: Out on the prairie
- Replies: 26
- Views: 3164
Re: Out on the prairie
Great photos Tom, keep em coming. Thanks for the effort
- Tue Feb 16, 2021 8:15 pm
- Forum: Classifieds - Parts
- Topic: Chickasha
- Replies: 3
- Views: 1447
Chickasha
My sticker came today. Can't wait !!!!!!!!!!!!!!!
- Fri Dec 11, 2020 8:27 am
- Forum: General Discussion Forum
- Topic: headlight lense for sale
- Replies: 17
- Views: 2889
headlight lense for sale
Check out this ebay listing for a RARE headlight lense
https://www.ebay.com/itm/Unique-Parts-F ... Swne1f01~Z
https://www.ebay.com/itm/Unique-Parts-F ... Swne1f01~Z
- Thu Nov 19, 2020 7:26 pm
- Forum: General Discussion Forum
- Topic: Lifting Flywheel
- Replies: 7
- Views: 2158
Re: Lifting Flywheel
Thank you. It is more clear now, I just didn't see the hanger loup.
- Thu Nov 19, 2020 8:39 am
- Forum: General Discussion Forum
- Topic: Lifting Flywheel
- Replies: 7
- Views: 2158
Re: Lifting Flywheel
Would it be possible to show just the tool? I have this project coming up.
- Sat Nov 14, 2020 8:50 am
- Forum: Classifieds - Parts
- Topic: WTB: Distributor cap for Bosch T-448
- Replies: 15
- Views: 2420
Re: WTB: Distributor cap for Bosch T-448
I am the "fellow in the midwest" and I do have a large inventory of NOS ignition parts for most makes and models from 1910 to 1960. I have Bosch rotors and point sets but do not have caps for sale at this time. I have contact with two other people with similar inventories here in the US and neither ...
- Wed Sep 23, 2020 9:36 pm
- Forum: Classifieds - Parts
- Topic: FS Bosch distributor NOS parts
- Replies: 1
- Views: 813
FS Bosch distributor NOS parts
I have several sets of points, condensers and rotors for the Bosch 600 early distributors. Can't seem to post a picture tonight so email me at tsvanmeet@gmail.com
- Wed Sep 23, 2020 9:33 pm
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11127
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
We will be there for sure the way it looks now. I already have 6 orders for NOS ignition parts for people with cars other than model Ts. So if you or a friend need something like distributor caps, points, rotors or brushes for other makes and models, email me at tsvanmeet@gmail.com with those needs....
- Wed Sep 23, 2020 9:29 pm
- Forum: Classifieds - Parts
- Topic: WTB Bosch
- Replies: 5
- Views: 1217
Re: WTB Bosch
big2bird, I have the parts NOS. Can't seem to load pictures tonight. Contact me via email tsvanmeet@gmail.com
Tom
Tom
- Fri Sep 18, 2020 9:32 am
- Forum: General Discussion Forum
- Topic: WTB NOS ignition parts at Luray
- Replies: 1
- Views: 846
WTB NOS ignition parts at Luray
We plan to attend the swap meet in Luray in a few weeks. As always, we are in the market to purchase NOS ignition parts for any make or model. If you have some of these unidentified parts like distributor caps, points, rotors etc, bring them along, we are interested. See you there and pray for sunny...
- Mon Sep 14, 2020 9:37 am
- Forum: General Discussion Forum
- Topic: Luray Swap Meet, October 6-8 - What are you bringing to sell?
- Replies: 71
- Views: 11127
Re: Luray Swap Meet, October 6-8 - What are you bringing to sell?
We are thinking about attending the swap meet in a few weeks. I buy and sell NOS ignition parts (dist caps, points, rotors, brushes etc) for most makes and model of cars and trucks from 1910 to 1960. We have parts all the way from Auburn to Willys I will not pull my vending trailer all the way to Lu...
- Sun Jul 05, 2020 10:56 pm
- Forum: General Discussion Forum
- Topic: Any one living in Great Falls, MT?
- Replies: 3
- Views: 1921
Any one living in Great Falls, MT?
Need someone to possibly check out a vehicle in or near Great Falls. Looks good on the photo buy a pair of eyes is worth more than a photo
- Thu Jun 25, 2020 7:49 pm
- Forum: General Discussion Forum
- Topic: I'm done with white tires
- Replies: 14
- Views: 5117
Re: I'm done with white tires
Rich, no the other two that I changed about a year ago are still okay at this point. The right front is the culpret. The first set that I had on went about 4000 miles with no problems what ever. I have not done anything to the front geometry but did check it and it is within specs. Just a bad tire I...
- Thu Jun 25, 2020 7:21 am
- Forum: General Discussion Forum
- Topic: I'm done with white tires
- Replies: 14
- Views: 5117
Re: I'm done with white tires
No Steve, they were brand new from a well known supplier.
- Wed Jun 24, 2020 9:43 pm
- Forum: General Discussion Forum
- Topic: I'm done with white tires
- Replies: 14
- Views: 5117
I'm done with white tires
I have had a set of smooth whites on my 11 for the past 10 years or so. Probably about 4000+ miles during that time. Last year I replaced three of them for various reasons. Tonight we went for a little car show about 10 miles from home. When my wife got out of the car she noticed the cords were show...
- Mon Jun 08, 2020 8:51 am
- Forum: General Discussion Forum
- Topic: What is this?
- Replies: 10
- Views: 3621
Re: What is this?
Model t barn, where is the engine located. I am interested, as I am currently working on a 1920 Buick
- Sat May 16, 2020 8:28 am
- Forum: General Discussion Forum
- Topic: atwater kent model h distributor
- Replies: 1
- Views: 1308
Re: atwater kent model h distributor
Rich, contact me at tsvanmeet@gmail.com I may be able to help you Tom
- Thu Apr 30, 2020 9:20 am
- Forum: Classifieds - Parts
- Topic: Bosch points
- Replies: 2
- Views: 1570
Bosch points
I have several sets of NOS Bosch points for sale. Tsvanmeet@gmail.com. sorry can't get the picture to load
- Thu Apr 30, 2020 8:22 am
- Forum: General Discussion Forum
- Topic: We lost another one
- Replies: 28
- Views: 8970
We lost another one
I received a phone call last night from a mutual friend and looked on Google this morning to confirm it. From the mortuary site on the web "It is with deep sorrow that we announce the death of Herman Kohnke (Clare, Iowa), who passed away on April 20, 2020, at the age of 73, leaving to mourn family a...
- Sun Apr 19, 2020 9:49 am
- Forum: General Discussion Forum
- Topic: NEW MTFCA & Museum Website Launches April 18!
- Replies: 16
- Views: 5191
Re: NEW MTFCA & Museum Website Launches April 18!
I was very surprised this morning when I opened the website. GREAT work, looks good, thanks for all the work
- Sun Apr 19, 2020 9:47 am
- Forum: Live Video Webinars
- Topic: Model T Webinar #2 - Coil Testing/Tuning
- Replies: 67
- Views: 23482
Re: Coil Testing/Tuning Webinar
Count me in as well, looking forward to it!!!!!!!!!!!
- Tue Apr 14, 2020 8:36 am
- Forum: General Discussion Forum
- Topic: Transmission Simulator
- Replies: 8
- Views: 3806
Re: Transmission Simulator
It's blocked for me too. How do you agree to run Adobe?
- Wed Apr 01, 2020 8:11 pm
- Forum: General Discussion Forum
- Topic: CANCELLED - Luray 2020, Mid Atlantic Prewar Swap Meet
- Replies: 6
- Views: 2924
Re: CANCELLED - Luray 2020, Mid Atlantic Prewar Swap Meet
We kinda planned on attending Luray this year. Bummer!!!!!!!!!!!! What is there to see in the area? We would travel east on I70 and then south to Morgantown and east to Ridgely, south to Winchester, Front Royal and then into Luray.
- Tue Mar 31, 2020 9:15 am
- Forum: Classifieds - Parts
- Topic: O T F S Sawmill with belt drive for Model t STATIONARY MOTOR
- Replies: 5
- Views: 2717
Re: O T F S Sawmill pith PTO for Model t STATIONARY MOTOR
Belt drive, no PTO on this one
- Wed Nov 20, 2019 8:36 am
- Forum: Classifieds - Parts
- Topic: FS: Gilfillan Distributor....
- Replies: 6
- Views: 3002
Re: FS: Gilfillan Distributor....
The unit is an Atwater Kent magneto replacement unit, with a model CC distributor. The Gilfillan name plate is from the company that made the cap. Gilfillan was an early aftermarket ignition parts manufacturer. Gilfillan eventually became Bear, then Echlin and finally today we know them as NAPA.
- Tue Oct 29, 2019 9:03 am
- Forum: Classifieds - Parts
- Topic: WTB generator armature
- Replies: 2
- Views: 1654
Re: WTB generator armature
Dan, I have several armatures that were rewound about 5 years ago by a reputable company in the Seattle area. Contact me private message and we can discuss.
Tom
Tom
- Wed Oct 16, 2019 8:29 am
- Forum: General Discussion Forum
- Topic: Rear axle work table, fixtures and tooling.
- Replies: 19
- Views: 6332
Re: Rear axle work table, fixtures and tooling.
Neat tooling and great photos
- Wed Oct 02, 2019 8:35 am
- Forum: Classifieds - Parts
- Topic: FS Delco Distributor
- Replies: 2
- Views: 1551
Re: FS Delco Distributor
I have NOS consumable parts for these distributors- points, rotors, condensers and caps
- Wed Oct 02, 2019 8:33 am
- Forum: Classifieds - Parts
- Topic: Strange distributer
- Replies: 14
- Views: 5297
Re: Strange distributer
Atwater Kent NO doubt at all From the ignition parts expert.
- Sun Aug 25, 2019 8:38 am
- Forum: General Discussion Forum
- Topic: Post Your 2019 Fall Hershey Swap Spaces Here!
- Replies: 60
- Views: 17325
Re: Post Your 2019 Fall Hershey Swap Spaces Here!
Come see us for NOS ignition parts for most makes and models from 1910 to 1960. I know Ford stuff is readily available but bring a friend along to see our vast availability of other ignition parts. We will be at C4N 31-32 just north of the central bathroom area in the north Chocolate field.
- Tue Jun 04, 2019 7:55 am
- Forum: Classifieds - Parts
- Topic: FARMINGTON MN SWAP MEET SUNDAY JUNE 9
- Replies: 2
- Views: 1808
Re: FARMINGTON MN SWAP MEET SUNDAY JUNE 9
Tell me more about this meet. Location, time etc
- Fri May 03, 2019 9:28 am
- Forum: General Discussion Forum
- Topic: idenentification of distributor/rotor type help
- Replies: 14
- Views: 5905
Re: idenentification of distributor/rotor type help
Kevin is correct in his assessment of the different types of distributors made by Bosch. However, all through their production run, they only used 3 different rotors as shown in the photo. The one on the left with the T contact is the one most often encountered with a "model T" distributor. The midd...
- Tue Mar 26, 2019 5:26 pm
- Forum: Classifieds - Parts
- Topic: Atwater Kent and Mallory Parts
- Replies: 2
- Views: 2082
Re: Atwater Kent and Mallory Parts
Carter, sent you a private email
Tom
Tom
- Sun Feb 24, 2019 9:01 pm
- Forum: General Discussion Forum
- Topic: Texas speedway meet
- Replies: 20
- Views: 7243
Re: Texas speedway meet
We went last year, waste of time and money