Search found 365 matches

by Michael Peternell
Wed Jul 21, 2021 12:13 pm
Forum: General Discussion Forum (started 2019)
Topic: Model TT trucks galore
Replies: 8
Views: 652

Re: Model TT trucks galore

Holy mackerel! Shame that they were left go like that, but just the view of them all lined up is impressive. John drug them home over the last 50 years. They looked almost exactly the same now as then. Things don't rust in this neck of the woods like other places. Most of the worst damage to the sh...
by Michael Peternell
Wed Jul 21, 2021 6:42 am
Forum: General Discussion Forum (started 2019)
Topic: Model TT trucks galore
Replies: 8
Views: 652

Re: Model TT trucks galore

I spent approximately 4 hours looking these over this past weekend. Lot's of good sheetmetal and parts.
Funny thing I noticed. All those trucks and not a single set of aftermarket springs!
by Michael Peternell
Thu Jul 15, 2021 11:46 pm
Forum: General Discussion Forum (started 2019)
Topic: 1915 Touring Value
Replies: 22
Views: 820

Re: 1915 Touring Value

Please see current classifieds. I think it's a good honest number. If it's a `15.
by Michael Peternell
Thu Jul 15, 2021 11:19 pm
Forum: General Discussion Forum (started 2019)
Topic: Miller head update
Replies: 54
Views: 3621

Re: Miller head update

Scott_Conger wrote:
Thu Jul 15, 2021 2:21 pm
Michael

you a believer yet? :D
Yup! My bad!
by Michael Peternell
Wed Jul 14, 2021 9:45 pm
Forum: Classifieds - Parts
Topic: Wanted to buy trafficator
Replies: 13
Views: 889

Re: Wanted to buy trafficator

Email sent.
by Michael Peternell
Wed Jul 14, 2021 9:31 pm
Forum: General Discussion Forum (started 2019)
Topic: Miller head update
Replies: 54
Views: 3621

Re: Miller head update

Michael I was wondering the same thing and wonder now if it isn't a function of camera angle. As an amature machinist I could see where the gasket side would be molded to a machinable profile with the water jacket being above it and squared off. All views have so little depth of field that within a...
by Michael Peternell
Wed Jul 14, 2021 8:15 pm
Forum: General Discussion Forum (started 2019)
Topic: Miller head update
Replies: 54
Views: 3621

Re: Miller head update

Bottom and top side photos don't seem to match?
by Michael Peternell
Mon Jul 12, 2021 7:23 pm
Forum: General Discussion Forum (started 2019)
Topic: Sacriligious!
Replies: 12
Views: 1018

Re: Sacriligious!

I believe the term is "fugley"!
by Michael Peternell
Sun Jul 11, 2021 8:43 pm
Forum: OT - Off topic
Topic: Renewing my Model T warranty
Replies: 15
Views: 475

Re: Renewing my Model T warranty

ATTENTION! OUR RECORDS INDICATE THAT YOUR 1921 fordrunster VEHICLE FACTORY WARRANTY IS ABOUT TO EXPIRE OR HAS EXPIRED! YOU MUST CALL NOW TO ASSURE CONTINUED COVERAGE ON YOUR 1921 fordrunster VEHICLE! DON'T BE LEFT WITOUT COVERAGE FOR EXPENSIVE BREAKDOWNS! A TRANSMISSION REPLACEMENT BILL FOR YOUR 19...
by Michael Peternell
Tue Jul 06, 2021 11:03 pm
Forum: Classifieds - Vehicles
Topic: FS 1914 Gentleman's Speedster- Very Fast!!!!
Replies: 14
Views: 1933

Re: FS 1914 Gentleman's Speedster- Very Fast!!!!

F...ing WOW! I apologize but... l won't repeat myself. That is about as much art as it is automotive! I see the "Gentleman" in it.
by Michael Peternell
Tue Jul 06, 2021 9:05 pm
Forum: OT - Off topic
Topic: Stoughton trucks
Replies: 1
Views: 209

Stoughton trucks

This is what I have. It's a Stoughton drive train mounted in a Studebaker frame with a model A front axle. Anyone have any information or know someone with one?
Thanks for your consideration!
Mike Peternell
IMG_20160813_105007570.jpg
IMG_20160813_105026909.jpg
by Michael Peternell
Tue Jun 29, 2021 8:33 pm
Forum: General Discussion Forum (started 2019)
Topic: First Stromberg OF needle fresh off of assembly jig - New Pix, New Needle
Replies: 23
Views: 1261

Re: First Stromberg OF needle fresh off of assembly jig

Carburetor porn! Showing your bits in front of God and everyone.
Well done sir!!!
by Michael Peternell
Mon Jun 28, 2021 8:45 pm
Forum: Classifieds - Parts
Topic: Motoring goggles for sale
Replies: 4
Views: 610

Re: Motoring goggles for sale

Duckwing wrote:
Mon Jun 28, 2021 4:14 pm
When are the repros coming?
Right!!! Can't wait!
by Michael Peternell
Sun Jun 27, 2021 10:29 pm
Forum: Classifieds - Vehicles
Topic: FS SUPER NICE 1925 BOAT-TAIL SPEEDSTER
Replies: 8
Views: 1160

Re: FS SUPER NICE 1925 BOAT-TAIL SPEEDSTER

Pull your ad Hank! Roll that through a Mecum auction. You'll get a bit more! Guessing huge bit! That car is a peach!
by Michael Peternell
Sat Jun 26, 2021 9:13 am
Forum: Classifieds - Parts
Topic: Stromberg MB1 rebuilding
Replies: 2
Views: 358

Re: Stromberg MB1 rebuilding

Anyone?....
by Michael Peternell
Thu Jun 24, 2021 3:43 pm
Forum: Classifieds - Parts
Topic: Stromberg MB1 rebuilding
Replies: 2
Views: 358

Stromberg MB1 rebuilding

Looking for someone to rebuild my MB1 carb.
Any suggestions would be appreciated.
Thanks for your consideration!
Michael Peternell
by Michael Peternell
Mon Jun 21, 2021 4:04 pm
Forum: Classifieds - Parts
Topic: WTB 1916 Ford Times Magazine
Replies: 2
Views: 247

Re: WTB 1916 Ford Times Magazine

Still looking.
by Michael Peternell
Sat Jun 19, 2021 8:12 pm
Forum: General Discussion Forum (started 2019)
Topic: Staude tractor conversion
Replies: 11
Views: 672

Re: Staude tractor conversion

Named it "Patch" for the extra bolts showing in the mag picture. Look under the water inlet pipe.
by Michael Peternell
Sat Jun 19, 2021 7:02 pm
Forum: General Discussion Forum (started 2019)
Topic: Staude tractor conversion
Replies: 11
Views: 672

Re: Staude tractor conversion

Earning its keep in Forest City Iowa this weekend. Friends Keith and Mike towing Mike's Sandwich engine to the dyno.
PXL_20210619_145652852.MP.jpg
by Michael Peternell
Fri Jun 18, 2021 7:32 pm
Forum: General Discussion Forum (started 2019)
Topic: Staude tractor conversion
Replies: 11
Views: 672

Re: Staude tractor conversion

Sun was just right for an engine pic.
PXL_20210618_130115115.jpg
by Michael Peternell
Fri Jun 18, 2021 8:59 am
Forum: General Discussion Forum (started 2019)
Topic: Staude tractor conversion
Replies: 11
Views: 672

Re: Staude tractor conversion

Thanks Hank!
IMG_20180730_194618.jpg
This was my little guy 3 years ago checking out the yard art.
by Michael Peternell
Fri Jun 18, 2021 6:55 am
Forum: General Discussion Forum (started 2019)
Topic: Staude tractor conversion
Replies: 11
Views: 672

Staude tractor conversion

I did some horse trading and got my yard art going. My little guy seems to approve!
PXL_20210618_001109186.jpg
by Michael Peternell
Tue Jun 15, 2021 9:51 pm
Forum: General Discussion Forum (started 2019)
Topic: Model TTimes magazine question
Replies: 3
Views: 416

Re: Model TTimes magazine question

Yes they did. Thank you for the proper naming! Both for sale on eBay. Please see my WTB ad in the parts forum.
by Michael Peternell
Tue Jun 15, 2021 7:34 pm
Forum: Classifieds - Parts
Topic: WTB 1916 Ford Times Magazine
Replies: 2
Views: 247

WTB 1916 Ford Times Magazine

Anyone have the December or January issues they would part with?
by Michael Peternell
Mon Jun 14, 2021 9:56 pm
Forum: General Discussion Forum (started 2019)
Topic: Model TTimes magazine question
Replies: 3
Views: 416

Model TTimes magazine question

I tried with the googler and couldn't find if they had 1916 December, January issues?
Thanks for your consideration!
Mike Peternell
by Michael Peternell
Sun Jun 13, 2021 1:30 pm
Forum: General Discussion Forum (started 2019)
Topic: Farmington, Mn. Model T Reunion. June12 & 13
Replies: 18
Views: 1070

Re: Farmington, Mn. Model T Reunion. June12 & 13

Some of the cars and trucks that were there this morning.
PXL_20210613_141538454.jpg
PXL_20210613_141553834.jpg
by Michael Peternell
Thu Jun 10, 2021 7:13 pm
Forum: Classifieds - Parts
Topic: Minnesota Area Model T Reunion June 12-13
Replies: 16
Views: 831

Re: Minnesota Area Model T Reunion June 12-13

Anyone going please bring along the oddball Chicago mark e aftermarket transmissions you have laying around!
by Michael Peternell
Tue Jun 08, 2021 9:54 pm
Forum: Classifieds - Parts
Topic: FS 1909-11 cylinder head
Replies: 2
Views: 456

Re: FS 1909-11 cylinder head

If you know, what was used on the first repair? Nickel weld or JB weld or....? Doesn't look brazed.
Thanks.
Michael Peternell
by Michael Peternell
Fri Jun 04, 2021 7:49 pm
Forum: OT - Off topic
Topic: FJ - Anyone Know A Good Diesel Mechanic in Cheyenne, WY Who Can Change Out A Mechanical Fuel Pump On A 96’ PSD ?
Replies: 8
Views: 1041

Re: FJ - Anyone Know A Good Diesel Mechanic in Cheyenne, WY Who Can Change Out A Mechanical Fuel Pump On A 96’ PSD ?

He has special dispensation Steve. Didn’t you know that by now? Boy howdy! Ain't that the truth! Odd how a national non profit let's this promotion go. Nothing against FJ. But if a post by Stan gets moved to Off topic because he's advertising someone needs to pull their heads out of their....... I'...
by Michael Peternell
Thu May 27, 2021 7:00 pm
Forum: Classifieds - Parts
Topic: ATTN: TIM MORSHER
Replies: 31
Views: 2098

Re: ATTN: TIM MORSHER

Oh my, what would Stan say?? #1). I’m not AMAZON. 2). On these washers, I waited until all the $$ came in, because they required a trip to PO. THEY meaning miss Connie. I actually gave up on one order , but the buyer told me yesterday they still want them, so still waiting on $$ after two weeks. Al...
by Michael Peternell
Thu May 27, 2021 6:41 pm
Forum: General Discussion Forum (started 2019)
Topic: For the Zoom-Zoom guys !
Replies: 3
Views: 857

Re: For the Zoom-Zoom guys !

Thanks Leo. Where else can we enjoy a car like that without having to build one? Very nice pictures. Rich Museum of Speed! I'm kicking myself for not getting more pictures. The coolest collection of model T racing engines! They must have at least 20 different OHV configurations. PXL_20210507_172015...
by Michael Peternell
Mon May 24, 2021 9:24 pm
Forum: OT - Off topic
Topic: Another "tough" ID
Replies: 8
Views: 757

Re: Another "tough" ID

Zoom in and check out the shit eating grin on the two in the background on a buggy. Gotta wonder what that was about?
by Michael Peternell
Sat May 22, 2021 7:34 pm
Forum: General Discussion Forum (started 2019)
Topic: Stan Howe RIP
Replies: 95
Views: 5908

Re: Stan Howe RIP

100_0835.JPG 100_0834.JPG 100_0832.JPG I only had the pleasure corresponding with Stan over the last few years. You can't hardly help but get along if you "get" guys like Stan. He was very proud of these carbs he did for me. It pissed him off to no end when they got moved to the services forum. The...
by Michael Peternell
Fri May 14, 2021 9:54 pm
Forum: General Discussion Forum (started 2019)
Topic: Firewall drawings/ schematic 1915
Replies: 11
Views: 747

Re: Firewall drawings/ schematic 1915

Greetings from Canada. Wishing everyone good health and safety in these interesting times as our early "T's" are make their way through their second world-wide pandemic. I am working on my '15 runabout (COVID 19 project) and am looking for drawings or a schematic of the firewall to assist in genera...
by Michael Peternell
Mon May 10, 2021 9:16 pm
Forum: General Discussion Forum (started 2019)
Topic: 1915 touring bow measurements
Replies: 8
Views: 647

Re: 1915 touring bow measurements

Yup; didn't catch that :oops: This may help some. Front: The distance from the center of the pivot/attachment pin to the center of the murphy fastener, the end of which is only about 1/64" from the edge of the metal socket, is 26-11/16". Second: The distance from the center of the eye at the end of...
by Michael Peternell
Mon May 10, 2021 9:04 pm
Forum: General Discussion Forum (started 2019)
Topic: Tool identification
Replies: 16
Views: 1163

Re: Tool identification

Some better pictures.
PXL_20210510_234525579.jpg
PXL_20210510_234600000.jpg
PXL_20210511_004327984.jpg
PXL_20210511_004309156.jpg
PXL_20210510_234538971.jpg
Could very well be shop built. A few obvious machining imperfections.
by Michael Peternell
Mon May 10, 2021 4:24 pm
Forum: General Discussion Forum (started 2019)
Topic: 1915 touring bow measurements
Replies: 8
Views: 647

Re: 1915 touring bow measurements

Touring. Says so in the title. This drawing helps but does not show how far the front and back bows are left out of the sockets.
I wish I could find that post back that had the measurements. Thanks for your consideration!
Mike
by Michael Peternell
Sun May 09, 2021 8:03 pm
Forum: General Discussion Forum (started 2019)
Topic: T related around York Nebraska?
Replies: 9
Views: 899

Re: T related around York Nebraska?

Pioneer Village and the Museum of Speed are great choices. I may not be available and my cars are certainly in a state of disarray. If you stop at the M of Speed, most T related cars and displays are on the 2nd floor, although there are great things throughout the museum. Also, if you stay in the L...
by Michael Peternell
Sun May 09, 2021 7:56 pm
Forum: General Discussion Forum (started 2019)
Topic: T related around York Nebraska?
Replies: 9
Views: 899

Re: T related around York Nebraska?

TMiller6 wrote:
Thu Apr 29, 2021 10:45 pm
Make a point of dining at Chances R in downtown York. Their banquet room in back has a lot of car related nostalgia. The food was good too.
The tool club banquet was held there! Spot on! Great food and cool venue.
by Michael Peternell
Sun May 09, 2021 7:14 pm
Forum: General Discussion Forum (started 2019)
Topic: Tool identification
Replies: 16
Views: 1163

Re: Tool identification

The adjustable wrench is typically English. Just as USA adjustable wrenches are universally referred to as crescent wrenches, these are called King Dick spanners, even though there were many other brands. If that is a faint FORD script on the head, it is most likely for a later English import car. ...
by Michael Peternell
Sun May 09, 2021 6:26 pm
Forum: General Discussion Forum (started 2019)
Topic: Tool identification
Replies: 16
Views: 1163

Re: Tool identification

Erik Johnson wrote:
Sun May 09, 2021 10:31 am
As others have posted, it is a Ford script Z wrench but the three digit number is not very legible due to corrosion.

I have rotated the photo so the Ford script, Z and are upright and easier comprehend.
Thanks! Don't know why it posted that way.
by Michael Peternell
Sat May 08, 2021 11:10 pm
Forum: General Discussion Forum (started 2019)
Topic: Tool identification
Replies: 16
Views: 1163

Re: Tool identification

speedytinc wrote:
Sat May 08, 2021 10:59 pm
Axle nut is 15/16. that would have been my guess on that tool.
15/16" is most likely spot on. Pics of the assembly line anyone? Would be easy to see. It's a foot long.
by Michael Peternell
Sat May 08, 2021 10:52 pm
Forum: General Discussion Forum (started 2019)
Topic: Tool identification
Replies: 16
Views: 1163

Re: Tool identification

Open end is 1" weighs a few pounds.
by Michael Peternell
Sat May 08, 2021 3:33 pm
Forum: General Discussion Forum (started 2019)
Topic: Tool identification
Replies: 16
Views: 1163

Tool identification

I picked up a couple and any information would be appreciated!
PXL_20210508_175103940.jpg
PXL_20210508_175058581.jpg
PXL_20210508_175109510.jpg
PXL_20210508_175010065.jpg
PXL_20210508_175031657.jpg
by Michael Peternell
Tue May 04, 2021 6:54 pm
Forum: General Discussion Forum (started 2019)
Topic: 1915 touring bow measurements
Replies: 8
Views: 647

1915 touring bow measurements

I'm getting ready to install a new top on my car. I found an old post giving measurements from top of the sockets to the top of the bows.
Can't find it back for the life of me! I want to make sure the old bows aren't pushed too deep into the sockets. Any help would be appreciated!
Thanks!
by Michael Peternell
Fri Apr 30, 2021 6:45 am
Forum: General Discussion Forum (started 2019)
Topic: T related around York Nebraska?
Replies: 9
Views: 899

Re: T related around York Nebraska?

Was thinking about the Pioneer village.
by Michael Peternell
Thu Apr 29, 2021 9:20 pm
Forum: General Discussion Forum (started 2019)
Topic: T related around York Nebraska?
Replies: 9
Views: 899

T related around York Nebraska?

Taking my dad to the tool auction in York. I may have some time on my hands to freelance. Planning on the museum of speed in Lincoln.
Any other suggestions?
Thanks in advance!
by Michael Peternell
Fri Apr 23, 2021 7:50 pm
Forum: General Discussion Forum (started 2019)
Topic: Smiling California Chapter and Marijuana
Replies: 26
Views: 1753

Re: Smiling California Chapter and Marijuana

Did anyone find the skunks in there? A friend told me it had to stink like hell! :) :D
by Michael Peternell
Mon Apr 19, 2021 9:20 pm
Forum: General Discussion Forum (started 2019)
Topic: Wrench and bead breaker
Replies: 5
Views: 629

Re: Wrench and bead breaker

Thanks! Please expand. Year?
by Michael Peternell
Mon Apr 19, 2021 8:18 pm
Forum: General Discussion Forum (started 2019)
Topic: Wrench and bead breaker
Replies: 5
Views: 629

Wrench and bead breaker

Did some horse trading with my dad. What's the wrench for?
PXL_20210419_204315599.jpg
PXL_20210419_204324515.jpg
PXL_20210419_203337840.jpg
PXL_20210419_203320977.jpg
by Michael Peternell
Fri Apr 16, 2021 9:23 pm
Forum: General Discussion Forum (started 2019)
Topic: Annual Spring Swap Meet Mn.
Replies: 16
Views: 1327

Re: Annual Spring Swap Meet Mn.

Any of you folks going feel free to bring any oddball carb or magneto. T related or not.
by Michael Peternell
Thu Apr 15, 2021 7:58 pm
Forum: General Discussion Forum (started 2019)
Topic: Any Hints on preserving/strengthening a Fiber Gear
Replies: 17
Views: 1265

Re: Any Hints on preserving/strengthening a Fiber Gear

Gently clamp and soak it in quick poly. If you can find it.
by Michael Peternell
Wed Apr 14, 2021 7:57 pm
Forum: General Discussion Forum (started 2019)
Topic: The Speedster in Montana.
Replies: 23
Views: 1843

Re: The Speedster in Montana.

Oh come on Duey! Everyone knows the t handle is for the ejection seat! :lol:
by Michael Peternell
Wed Apr 14, 2021 6:37 pm
Forum: General Discussion Forum (started 2019)
Topic: The Speedster in Montana.
Replies: 23
Views: 1843

Re: The Speedster in Montana.

Nitrous switch! :D
by Michael Peternell
Tue Apr 13, 2021 7:11 pm
Forum: General Discussion Forum (started 2019)
Topic: What "barn find" would you like to find?
Replies: 31
Views: 1886

Re: What "barn find" would you like to find?

perry kete wrote:
Tue Apr 13, 2021 7:03 pm
MY BARN FIND


Jane Russel.jpg
I suppose.... if you're into that kinda thing.
Pick me! Pick me!
by Michael Peternell
Mon Apr 12, 2021 10:47 pm
Forum: OT - Off topic
Topic: This was trucking-Old Photos
Replies: 669
Views: 119112

Re: This was trucking-Old Photos

Rich Bingham wrote:
Mon Apr 12, 2021 9:32 pm
A bare bones TT.
Maybe spring road restrictions! Gotta keep it light. LoL!
by Michael Peternell
Sat Apr 10, 2021 7:26 pm
Forum: General Discussion Forum (started 2019)
Topic: Model T trailer
Replies: 11
Views: 1018

Re: Model T trailer

You actually waited for the price to go down before going for it? Gotta say model T guys are a frugal bunch!
All in fun! That wouldn't have lasted an hour on Craigslist up here in Minnesota.
by Michael Peternell
Sat Apr 10, 2021 6:59 pm
Forum: General Discussion Forum (started 2019)
Topic: Besides your T, what other Ford would you wish to own?
Replies: 51
Views: 2606

Re: Besides your T, what other Ford would you wish to own?

https://www.farmcollector.com/company-h ... d-tractor/ I'd get by with one of these.
If you folks know of one of these for sale let me know! Shouldn't be worth much because it's not really a Ford!
by Michael Peternell
Wed Apr 07, 2021 8:11 pm
Forum: General Discussion Forum (started 2019)
Topic: Howell's Sheet Metal problem
Replies: 24
Views: 2224

Re: Howell's Sheet Metal problem

Just a thought. The small shop could answer the phone and have a great chat with each and every customer. That shouldn't take much time as model T guys don't really like talking about their car much. All 10 of those guys will talk about the great customer service! Or..... don't answer the phone, bus...
by Michael Peternell
Tue Apr 06, 2021 9:10 pm
Forum: General Discussion Forum (started 2019)
Topic: Where did you discover your Model T?
Replies: 39
Views: 2371

Re: Where did you discover your Model T?

Not a proper T but my first. Was advertised as a model T Ford tractor yard art on the auction poster. Pierz MN, about thirty miles away. The wife and I went. When I saw it I told the my wife it was going to be ours come hell or high water! IMG_20150725_062600947.jpg IMG_20150725_062549657.jpg The be...
by Michael Peternell
Tue Apr 06, 2021 8:20 pm
Forum: General Discussion Forum (started 2019)
Topic: You can do anything with a Ford !!
Replies: 15
Views: 1652

Re: You can do anything with a Ford !!

With an auxiliary transmission one would have the time to start it in motion and wait for the plow to hop on! IMG_20170819_102857197.jpg I have no auxiliary. I engage the transmission with the parking break. Direct high. Idled down you can walk faster! With an auxiliary transmission one might get bo...
by Michael Peternell
Tue Apr 06, 2021 7:55 pm
Forum: General Discussion Forum (started 2019)
Topic: Ford sign ?
Replies: 22
Views: 1792

Re: Ford sign ?

Very nice collection Gary!
Thanks for sharing!
by Michael Peternell
Mon Apr 05, 2021 8:28 pm
Forum: General Discussion Forum (started 2019)
Topic: Who D.A.T. Ignition System
Replies: 51
Views: 8703

Re: Who D.A.T. Ignition System

I truly have enjoyed and appreciated every post in this thread ! Just don't post any pictures of shiny carbs you have! Just saying.
I bought mine from Tim. Cool setup! The DU4 will get your attention if you're not careful!
Thanks for posting this information!
Mike
by Michael Peternell
Sat Apr 03, 2021 10:41 pm
Forum: OT - Off topic
Topic: What have you done on an old non-Model T vehicle.
Replies: 184
Views: 37731

Re: What have you done on an old non-Model T vehicle.

My Cleveland got it's original carb reinstalled. Some sketchy guy in Montana who will go unnamed rebuilt it. :lol:
PXL_20210403_141350077.jpg
by Michael Peternell
Sat Apr 03, 2021 10:03 pm
Forum: OT - Off topic
Topic: Pretty Brass Carbs.
Replies: 18
Views: 3130

Re: Pretty Brass Carbs.

Here you go Duey! Back on the Cleveland.Can't wait to fire it up!
PXL_20210403_141350077.jpg
PXL_20210403_141334695.jpg
by Michael Peternell
Tue Mar 30, 2021 7:59 pm
Forum: OT - Off topic
Topic: Pretty Brass Carbs.
Replies: 18
Views: 3130

Re: Pretty Brass Carbs.

Can't wait to hear it on the mill or threshing machine at Pioneer Day's!
by Michael Peternell
Mon Mar 29, 2021 10:23 am
Forum: OT - Off topic
Topic: This was trucking-Old Photos
Replies: 669
Views: 119112

Re: This was trucking-Old Photos

1914 Jeffery Quad.
PXL_20210320_195645235.jpg
PXL_20210320_195636084.jpg
PXL_20210320_195621381.jpg
PXL_20210320_195656552.jpg
PXL_20210320_195705734.jpg
4 wheel drive and 4 wheel steering.
by Michael Peternell
Sun Mar 28, 2021 7:00 pm
Forum: General Discussion Forum (started 2019)
Topic: Very interesting auction in Montana!
Replies: 21
Views: 2833

Very interesting auction in Montana!

http://www.frontrangeauctions.com/
I have no connection to the seller. OHV T got my attention.
by Michael Peternell
Sat Mar 27, 2021 10:14 pm
Forum: OT - Off topic
Topic: Cleveland Six Model 40
Replies: 2
Views: 528

Re: Cleveland Six Model 40

Can't wait to put the original Stan Howe eye candy carb on it . Both engines had the original carbs on them. I'm guessing you might know the collector in Eastern ND I got the cars from!
by Michael Peternell
Sat Mar 27, 2021 3:45 pm
Forum: OT - Off topic
Topic: Cleveland Six Model 40
Replies: 2
Views: 528

Cleveland Six Model 40

https://youtu.be/NKyQ_twyPMA
First start.
11109.jpeg
IMG_20161113_142918256.jpg
IMG_20170101_085205_1.jpg
IMG_20190419_082257201.jpg
They were a little rough when I brought them home
by Michael Peternell
Fri Mar 26, 2021 8:14 pm
Forum: General Discussion Forum (started 2019)
Topic: Gas Cap Off and Looking in Inside
Replies: 22
Views: 1348

Re: Gas Cap Off and Looking in Inside

BLB27 wrote:
Fri Mar 26, 2021 3:27 pm
I have decided to "use it as is". What should I use to flush it out (gasoline ?)?
You made the right decision! Very few original tanks look that good! Dump some heavy ratio two cycle gas in it. Good to go!
by Michael Peternell
Fri Mar 26, 2021 7:57 pm
Forum: General Discussion Forum (started 2019)
Topic: Something fishy here . . .
Replies: 10
Views: 1355

Re: Something fishy here . . .

Rich Bingham wrote:
Fri Mar 26, 2021 2:04 pm
A big ol' sturgeon caught in the Snake River in the Burley area, no date given. Too bad we can't see all of this 1914 touring. The hood louvres indicate an accessory front end. Photo taken in front of a Ford dealership.
If the car survived it would have some interesting patina front to back!
by Michael Peternell
Thu Mar 25, 2021 7:23 pm
Forum: General Discussion Forum (started 2019)
Topic: Out on the prairie
Replies: 26
Views: 1341

Re: Out on the prairie

I'm just guessing but the boys in picture 19 might be loaded with a few trying to look sober!
by Michael Peternell
Sun Mar 21, 2021 2:59 pm
Forum: OT - Off topic
Topic: Here's your sign
Replies: 15
Views: 1714

Re: Here's your sign

Got this one at a model T swap in southern Minnesota.
PXL_20210321_182101431.jpg
by Michael Peternell
Fri Mar 19, 2021 10:20 pm
Forum: General Discussion Forum (started 2019)
Topic: Well used coil
Replies: 9
Views: 881

Re: Well used coil

Next time Stan just post the picture with the question if anyone has seen where you can get one. I can post a link to a pricelist! Happens all the time!
Not! Not! Not ! What you are doing ! Please keep sharing!
by Michael Peternell
Wed Mar 17, 2021 9:40 pm
Forum: General Discussion Forum (started 2019)
Topic: Annual Spring Swap Meet Mn.
Replies: 16
Views: 1327

Re: Annual Spring Swap Meet Mn.

This is always a good time! Look forward to it every year!
by Michael Peternell
Wed Mar 17, 2021 8:11 pm
Forum: Classifieds - Parts
Topic: Dads tools and parts
Replies: 10
Views: 2339

Re: Dads tools and parts

Please send pics.
PXL_20210318_000757005.jpg
by Michael Peternell
Wed Mar 17, 2021 7:23 pm
Forum: General Discussion Forum (started 2019)
Topic: What's wrong in these photos?
Replies: 27
Views: 1479

Re: What's wrong in these photos?

Gas tax sticker in the window?
by Michael Peternell
Tue Mar 16, 2021 6:32 am
Forum: Classifieds - Parts
Topic: Staude wheels to Chickasha?
Replies: 4
Views: 626

Re: Staude wheels to Chickasha?

My bad!
I was thinking Shaw MFG.
by Michael Peternell
Mon Mar 15, 2021 7:56 pm
Forum: Classifieds - Parts
Topic: Staude wheels to Chickasha?
Replies: 4
Views: 626

Re: Staude wheels to Chickasha?

Just asking to help. Are you looking for the cast front wheels?
by Michael Peternell
Mon Mar 15, 2021 1:15 pm
Forum: OT - Off topic
Topic: Show us your hit n miss engines
Replies: 34
Views: 4502

Re: Show us your hit n miss engines

Angmar wrote:
Sun Mar 14, 2021 7:23 pm
Michael Peternell wrote:
Fri Jan 29, 2021 5:00 pm
PXL_20210129_214723688.jpgPXL_20210129_214812047.jpg
Babes in the barn.

Geeze, I must have missed this earlier but are all of those yours? What is the large one in the back (like mine)?
My brother's and I own them and you are correct on the big Witte.
by Michael Peternell
Wed Mar 10, 2021 8:59 pm
Forum: Services
Topic: Just some carb eye candy
Replies: 11
Views: 1424

Re: Just some carb eye candy

Waiting like a 10 year old for Christmas morning!
Please post a picture of the NOS 5 ball you got going on!
by Michael Peternell
Tue Mar 09, 2021 9:06 pm
Forum: Services
Topic: Just some carb eye candy
Replies: 11
Views: 1424

Re: Just some carb eye candy

Stan, I wondered why you had posted this in the "Services Section" with no mention of doing the work for customers. They look Awesome! You may want to ask the Mods to move this post to the "Parts For Sale" section where MANY more people will see it & know you are selling them or if you have already...
by Michael Peternell
Fri Mar 05, 2021 10:23 pm
Forum: General Discussion Forum (started 2019)
Topic: Thought some might like mini t
Replies: 13
Views: 1327

Re: Thought some might like mini t

Very nice! Guessing some day will be on auction for more than you can buy an original! Great work!
by Michael Peternell
Fri Mar 05, 2021 1:29 pm
Forum: General Discussion Forum (started 2019)
Topic: Stromberg MB1 post moved to services?
Replies: 4
Views: 428

Stromberg MB1 post moved to services?

Mr Howe posted a bunch of great pictures of the above mentioned carb. He also posted facts about the carbs and how they work on our T's. Mr Howe has repeatedly said he is no longer taking on any work. No where in the post did he even hint he was looking for more work. Why was the post moved to servi...
by Michael Peternell
Fri Mar 05, 2021 6:45 am
Forum: Services
Topic: Just some carb eye candy
Replies: 11
Views: 1424

Re: Just some carb eye candy

I tried Stan!
by Michael Peternell
Thu Mar 04, 2021 8:30 pm
Forum: General Discussion Forum (started 2019)
Topic: Chickasha ride.
Replies: 10
Views: 940

Re: Chickasha ride.

What an awesome offer!
by Michael Peternell
Thu Mar 04, 2021 8:02 pm
Forum: General Discussion Forum (started 2019)
Topic: Model T Cattle Trailer
Replies: 46
Views: 2634

Re: Model T Cattle Trailer

Very cool Bob! Save the patina as best you can. Can't wait to see it at the next swap!
by Michael Peternell
Mon Mar 01, 2021 8:00 pm
Forum: General Discussion Forum (started 2019)
Topic: Help ID Aux Drive
Replies: 5
Views: 591

Re: Help ID Aux Drive

I'm guessing it's a governor for a stationary unit.??? Title of post made me think of other things.
by Michael Peternell
Mon Mar 01, 2021 7:20 pm
Forum: General Discussion Forum (started 2019)
Topic: Five bearing crank?
Replies: 23
Views: 1654

Re: Five bearing crank?

Can you post a picture of the book you have? I would like to be able to read the whole page. No offense, but I can't now.
by Michael Peternell
Sun Feb 28, 2021 9:40 pm
Forum: General Discussion Forum (started 2019)
Topic: Looking forward to being on the road.
Replies: 16
Views: 1013

Re: Looking forward to being on the road.

I'd like to see what's running that snowblower.
by Michael Peternell
Thu Feb 25, 2021 7:34 pm
Forum: General Discussion Forum (started 2019)
Topic: Thanks Tim Morsher
Replies: 13
Views: 1111

Re: Thanks Tim Morsher

I believe my first dealings with Tim had to do with some Chicago transmissions. I believe I treated him fairly! Since then I've been treated unfairly! I've bought a bunch of stuff since then a get a better deal than most! I didn't say it was a bad unfair! Never met him in person but I think he's a g...
by Michael Peternell
Wed Feb 24, 2021 8:22 pm
Forum: General Discussion Forum (started 2019)
Topic: Club Meetings in Covid Times
Replies: 11
Views: 952

Re: Club Meetings in Covid Times

NOS or fresh? Don't see it much up my way! Duey you bootlegging?!
by Michael Peternell
Thu Feb 11, 2021 6:51 pm
Forum: General Discussion Forum (started 2019)
Topic: New Langs catalog came today
Replies: 29
Views: 2222

Re: New Langs catalog came today

I put in a request for a new catalog a couple weeks ago, but still have not received one! I'm starting to think that maybe you have to order a part or something to get a catalog! Not that I see anything wrong with that though,....I'm sure that putting out a new catalog is a very time consuming and ...
by Michael Peternell
Tue Feb 09, 2021 7:36 pm
Forum: General Discussion Forum (started 2019)
Topic: Vintage Ford
Replies: 20
Views: 1808

Re: Vintage Ford

Just got a tractor calendar sent from the east. Post marked 12/ 16/20!
by Michael Peternell
Tue Feb 09, 2021 7:21 pm
Forum: General Discussion Forum (started 2019)
Topic: Parts ID
Replies: 18
Views: 1438

Re: Parts ID

If the "bracket" is associated with the bolts I believe it is called a frog. For a plow.