Search found 353 matches

by SurveyKing
Sat Jul 17, 2021 1:19 am
Forum: Classifieds - Parts
Topic: Looking for a rebuilt Holley NH Carb for my 1923 Model t
Replies: 5
Views: 301

Re: Looking for a rebuilt Holley NH Carb for my 1923 Model t

Contact Corey at Wlkma9@gmail.com
He'll take care of what you want.
by SurveyKing
Mon Jul 05, 2021 3:51 pm
Forum: General Discussion Forum (started 2019)
Topic: Ford Fathful oiler with exit tube on the left
Replies: 8
Views: 362

Re: Ford Fathful oiler with exit tube on the left

[scott
Are you saying that it would work effectivelygoing out the left?? /size]
by SurveyKing
Sat Jul 03, 2021 6:32 pm
Forum: General Discussion Forum (started 2019)
Topic: Throttle Rod Question
Replies: 1
Views: 225

Throttle Rod Question

Happy Independence day weekend to all! I have a question regarding the throttle rod running through the block from the steering wheel to the carb. This is on a 1924 model. There is a distinct bend of about 10 degrees a little less than 2 inches from one end. My question is: Does this end go to the ...
by SurveyKing
Fri Jun 25, 2021 9:58 am
Forum: General Discussion Forum (started 2019)
Topic: If you used Blockley Tubes
Replies: 21
Views: 1197

Re: If you used Blockley Tubes

I installed my set with no bridge washer, just the way Blockley shipped them. Additionally I used flaps and had no problem. They seem just fine to me. I trust Blockley researched this out already.
by SurveyKing
Tue Jun 22, 2021 10:35 am
Forum: General Discussion Forum (started 2019)
Topic: I Really Like These Bohlen “Solid” Brass Aftermarket Side View Mirrors
Replies: 14
Views: 1080

Re: I Really Like These Bohlen “Solid” Brass Aftermarket Side View Mirrors

Just heard back from the manufacturer, Bill. He indicated the mounting screws are 5/16 by 1 inch long, so they will fit well into the original threaded hole on the stanchions. I ordered a pair of black ones for my Touring; am anxious not to see how they will look.
by SurveyKing
Sun Jun 20, 2021 8:36 am
Forum: General Discussion Forum (started 2019)
Topic: Need Help Identifying Cars
Replies: 7
Views: 512

Re: Need Help Identifying Cars

Thank guys for your assessments, that may help her to know where this was taken. Pete, you have a good eye about that car being a 1909, it even has 1908 painted on the side!
by SurveyKing
Sat Jun 19, 2021 5:36 pm
Forum: General Discussion Forum (started 2019)
Topic: Need Help Identifying Cars
Replies: 7
Views: 512

Need Help Identifying Cars

This photo is of a friend of mine who recently passed away at the age of 76 climbing up into a Model T when he was a young boy. It is indicative of how long he loved Model T fords, but he was never able to acquire one until about a year and a half ago. Unfortunately after a little more than one yea...
by SurveyKing
Fri Jun 18, 2021 9:48 am
Forum: General Discussion Forum (started 2019)
Topic: I Really Like These Bohlen “Solid” Brass Aftermarket Side View Mirrors
Replies: 14
Views: 1080

Re: I Really Like These “Solid” Brass Aftermarket Side View Mirrors

They do look great, but I am not comfortable with having to drill and tap a hole in the stanchions on my 1924 Touring. Does anyone know if you have to do that or do they fit into the existing stanchion screw?
by SurveyKing
Wed Jun 16, 2021 12:01 am
Forum: General Discussion Forum (started 2019)
Topic: Tire / Tube woes
Replies: 23
Views: 1012

Re: Tire / Tube woes

Blockley has the metal stem tubes in both 30 x 3 1/2 and 30 x 3 size. Takes about 10 days to get them delivered.
by SurveyKing
Tue Jun 15, 2021 10:21 am
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires
Replies: 56
Views: 3000

Re: Blockley Tires

Kevin, other than putting down antique car tires, I just left the form blank and it went through just fine.
by SurveyKing
Mon Jun 14, 2021 8:24 am
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires
Replies: 56
Views: 3000

Re: Blockley Tires

Hi Allen, I went ahead and used flaps. Again, it was no problem and I was more comfortable knowing that I would not pinch the tube during mounting. cheers
by SurveyKing
Mon Jun 14, 2021 5:46 am
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires
Replies: 56
Views: 3000

Re: Blockley Tires Update

I finally got around to mounting the Blockley tires yesterday. They went on real easy, probably took only about 20 minutes per tire once I got the hang of it. I also used the Blockley metal stem tubes, which was ordered after getting the tires since they were not available through the vendors. Ther...
by SurveyKing
Sat Jun 12, 2021 12:47 pm
Forum: Classifieds - Parts
Topic: WTB: Metal Door Post 1925 Roadster
Replies: 5
Views: 314

Re: WTB: Metal Door Post 1925 Roadster

Thanks William. Do you want to call Ben Martin about that? His number is 770-938-3376, I think that is exactly what he is looking for. I will let him know you will be calling or give me your number and I'll ask him to call you. My email is Danielsnell2@twc.com

Thanks
by SurveyKing
Fri Jun 11, 2021 3:56 pm
Forum: Classifieds - Parts
Topic: WTB: Metal Door Post 1925 Roadster
Replies: 5
Views: 314

Re: WTB: Metal Door Post 1925 Roadster

Sorry, this is for Ben Martin.
by SurveyKing
Fri Jun 11, 2021 3:55 pm
Forum: Classifieds - Parts
Topic: WTB: Metal Door Post 1925 Roadster
Replies: 5
Views: 314

WTB: Metal Door Post 1925 Roadster

I am posting this for a friend of mine and good old Model T switch repairer. He does things the old school way and he asked me to post his request for a metal body post where the front door attaches to for his 1925 Roadster. If anyone has one, you can either post it here and I will relay it, or cal...
by SurveyKing
Wed Jun 09, 2021 9:21 pm
Forum: Classifieds - Parts
Topic: 1910-10 one piece spindles
Replies: 4
Views: 491

Re: 1910-10 one piece spindles

Hi Richard, my email is danielsnell2@twc.com, please shoot me an email so we can further communicate there. Thanks
by SurveyKing
Wed Jun 09, 2021 6:00 pm
Forum: Classifieds - Parts
Topic: 1910-10 one piece spindles
Replies: 4
Views: 491

Re: 1910-10 one piece spindles

Email sent
by SurveyKing
Sun May 30, 2021 8:35 am
Forum: Classifieds - Parts
Topic: FS: Judging Guidelines
Replies: 1
Views: 335

Re: FS: Judging Guidelines SOLD!

Guidelines are SOLD, Thank you MTFCA!
by SurveyKing
Sat May 29, 2021 5:56 pm
Forum: Classifieds - Parts
Topic: FS: Judging Guidelines
Replies: 1
Views: 335

FS: Judging Guidelines

Up for sale are both the 4th and 6th edition of the MTFCI Judging Guidelines in binders. Lots of good information here despite the age, 4th was printed in 1997 and 6th in 2013. (The 7th edition is now selling for $49.95) $20 for the 4th edition; $30 for the 6th or both for $40 all plus shipping in ...
by SurveyKing
Sat May 29, 2021 4:54 pm
Forum: General Discussion Forum (started 2019)
Topic: Schrader Tube Stem Dust Cover
Replies: 15
Views: 665

Re: Schrader Tube Stem Dust Cover

Steve, just what would the correct stem and cover be for a 1923-4, 30x3 1/2 demountable rim?
by SurveyKing
Sat May 29, 2021 10:32 am
Forum: General Discussion Forum (started 2019)
Topic: Schrader Tube Stem Dust Cover
Replies: 15
Views: 665

Re: Schrader Tube Stem Dust Cover

Thank you for that suggestion Larry, I will give that a try.
by SurveyKing
Sat May 29, 2021 9:40 am
Forum: Classifieds - Parts
Topic: WTB: Metal Stems and Bridge Washers
Replies: 0
Views: 206

WTB: Metal Stems and Bridge Washers

I would like to buy several original Schrader 777 metal stems for tubes along with original style bridge washers with the ridge. Please email me at: danielsnell2@twc.com
by SurveyKing
Fri May 28, 2021 9:18 pm
Forum: General Discussion Forum (started 2019)
Topic: Schrader Tube Stem Dust Cover
Replies: 15
Views: 665

Re: Schrader Tube Stem Dust Cover

Erik,

What thickness leather do you use? Looks like it would have to be at least 3/16 or 1/4 maybe.
by SurveyKing
Fri May 28, 2021 5:09 pm
Forum: General Discussion Forum (started 2019)
Topic: Schrader Tube Stem Dust Cover
Replies: 15
Views: 665

Schrader Tube Stem Dust Cover

This is a picture of one of a set of Schrader Dust covers for the metal stem 30x 3 1/2 tube. It is 2 1/2 inches tall from the bottom of the nut to the top of cover when screwed together. It seems as though there should be some sort of a felt or leather washer that would fit into the bottom of the r...
by SurveyKing
Fri May 28, 2021 9:27 am
Forum: General Discussion Forum (started 2019)
Topic: Clincher Rims and Rubber Valve Stems
Replies: 30
Views: 1596

Re: Clincher Rims and Rubber Valve Stems

Steve, I know you realize the nut that the Schrader valve stem cover screws on to at its base must screw down the metal stem to the felloe, so if the Blockley metal stem is too wide, I do not think it will work. I am hesitant to try the Blockley tubes for that reason. Am I wrong in being skeptical ...
by SurveyKing
Thu May 27, 2021 9:36 pm
Forum: General Discussion Forum (started 2019)
Topic: Clincher Rims and Rubber Valve Stems
Replies: 30
Views: 1596

Re: Clincher Rims and Rubber Valve Stems

I contacted Blockley to see about their brass stem tubes for 30 x 3 1/2, it seems they are 11.5 mm or 29/64 of an inch in diameter, does anyone have the size of the Hartford metal stem? I am wondering if the Schrader valve stem cover base will fit the Blockleys?
by SurveyKing
Wed May 26, 2021 1:03 pm
Forum: Classifieds - Parts
Topic: Holley NH center drain carburetor
Replies: 9
Views: 846

Re: Holley NH center drain carburetor

Corey, I apologize for getting off on this float valve discussion on your thread. I have two of your carbs and not only do you do a good job, but you are a good person to deal with. Keep up the good work my friend
by SurveyKing
Wed May 26, 2021 12:55 pm
Forum: Classifieds - Parts
Topic: Holley NH center drain carburetor
Replies: 9
Views: 846

Re: Holley NH center drain carburetor

So the Vinton tip is not sufficient?
by SurveyKing
Wed May 26, 2021 10:38 am
Forum: Classifieds - Parts
Topic: Holley NH center drain carburetor
Replies: 9
Views: 846

Re: Holley NH center drain carburetor

Is that one Vinton tipped? I am not familiar with Bob's stuff.
by SurveyKing
Tue May 25, 2021 9:26 am
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires
Replies: 56
Views: 3000

Re: Blockley Tires

Frank, I am not sure about this form you posted as it is not the same one DHL forwarded to me to fill out for customs. The country of origin is Great Britain not VN and the rim size is 23", outside tire size is 31". I just put down on the form "Automobile Tires" and nothing else and it sailed right...
by SurveyKing
Mon May 24, 2021 11:25 am
Forum: Classifieds - Parts
Topic: Holley NH center drain carburetor
Replies: 9
Views: 846

Re: Holley NH center drain carburetor

Hi Corey,

Do you use the full float valves like Scott Conger produces in your carbs?
by SurveyKing
Sun May 23, 2021 10:09 pm
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires
Replies: 56
Views: 3000

Re: Blockley Tires

You can go directly to their website www.blockleytyre.com and select Beaded Edge tyres which is their term for Clincher. Select the size and quantity and they will send you a quote promptly including shipping. The only thing they do not tell you is the amount of the import duty, which for me was mi...
by SurveyKing
Sun May 23, 2021 5:55 pm
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires
Replies: 56
Views: 3000

Re: Blockley Tires

Vernon, the tires are marked with "4 ply Rayon Max Load 1700 LBS at 65 PSI". Made in Vietnam like all tires seem to be now, but they were shipped from GB.
Blockley Label.jpg
Blockley Made in.jpg
by SurveyKing
Sun May 23, 2021 4:45 pm
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires
Replies: 56
Views: 3000

Blockley Tires

Thought I would let anyone interested in the 30 x 3 1/2 Blockley Tires from Great Britain about my purchase experience. I ordered 4 of them about 3 weeks ago and got them all in today. The cost of the four tires was $864.79, shipping was $210.39 and the import duty was $45.01 for all four. Total $1...
by SurveyKing
Fri May 07, 2021 8:41 am
Forum: Classifieds - Parts
Topic: Ignition Switch
Replies: 4
Views: 534

Re: Ignition Switch

One just sold on ebay for $500! Are they getting rare or what?
by SurveyKing
Thu Apr 22, 2021 9:48 pm
Forum: General Discussion Forum (started 2019)
Topic: Blockley Tires (Tyres)
Replies: 9
Views: 927

Blockley Tires (Tyres)

I am thinking about getting a set of 30 x 3.5 for my 24 Touring. They quoted me a price of around $1,050 for s set of four shipped to Texas. Before ordering, I would love to hear first from anyone who has used them on there Ts and what they thought of them. Thanks
by SurveyKing
Sat Apr 17, 2021 7:28 pm
Forum: General Discussion Forum (started 2019)
Topic: What have you done with your T Model in April ?
Replies: 66
Views: 6481

Re: What have you done with your T Model in April ?

Moved my 1909 Touring to our new home and Garage. We have been moving for the past 3 months little by little, and saved the best for last.
Move 1.jpg
Move 2.jpg
Move 2.2.jpg
Move 3.jpg
Move 4.jpg
[/size][/b]Now to get to work on it!
by SurveyKing
Sat Apr 03, 2021 9:10 pm
Forum: General Discussion Forum (started 2019)
Topic: Cowl Mounting - Need Help
Replies: 10
Views: 645

Re: Cowl Mounting - Need Help

Will, is that a pic of a 1924? The bracket on mine is fastened to the side of the body not the wood frame, if I am not mistaken, it is integral with the side body metal. I am thinking that the hole above the Stanchion bolt holes is to accommodate a bolt going through that bracket as it lines up per...
by SurveyKing
Fri Apr 02, 2021 3:21 pm
Forum: General Discussion Forum (started 2019)
Topic: Cowl Mounting - Need Help
Replies: 10
Views: 645

Re: Cowl Mounting - Need Help

Still looking for help on mounting the cowl to the sides of the body on a 1924 Touring, thank you for taking the time.
by SurveyKing
Tue Mar 30, 2021 3:22 pm
Forum: General Discussion Forum (started 2019)
Topic: Cowl Mounting - Need Help
Replies: 10
Views: 645

Re: Cowl Mounting - Need Help

Sorry one of the photos is driver side
by SurveyKing
Tue Mar 30, 2021 3:20 pm
Forum: General Discussion Forum (started 2019)
Topic: Cowl Mounting - Need Help
Replies: 10
Views: 645

Cowl Mounting - Need Help

I need help in clarifying the mounting of the cowl to the sides of the body on my 1924 Touring Car. Attached are photos of the Driver side and Passenger side cowl mounting holes. They are above where the two Stanchion Bolts go and coincide with a projection protruding from the sides of the body. My...
by SurveyKing
Sat Mar 20, 2021 11:35 am
Forum: Classifieds - Parts
Topic: Sold : NOS Oil Breather Cap $25 Plus Shipping
Replies: 2
Views: 691

Re: For Sale : NOS Oil Breather Cap $25 Plus Shipping

Hi Richard, posting here in case you have not received my two emails. Please let me know the total amount due
DanielSnell2@twc.com
by SurveyKing
Wed Mar 17, 2021 1:54 pm
Forum: Classifieds - Parts
Topic: Sold : NOS Oil Breather Cap $25 Plus Shipping
Replies: 2
Views: 691

Re: For Sale : NOS Oil Breather Cap $25 Plus Shipping

I'll take it. Will send email
Dan
by SurveyKing
Sat Mar 13, 2021 10:19 pm
Forum: Classifieds - Parts
Topic: WTB 1924 Engine
Replies: 9
Views: 837

Re: WTB 1924 Engine

Thanks Jerome, are you going to Chickasaw?
by SurveyKing
Mon Mar 08, 2021 8:27 pm
Forum: Classifieds - Parts
Topic: WTB 1924 Engine
Replies: 9
Views: 837

Re: WTB 1924 Engine

Hi Rich, Will call you tomorrow to discuss, yours is April 2.
by SurveyKing
Sun Mar 07, 2021 6:56 pm
Forum: Classifieds - Parts
Topic: WTB 1924 Engine
Replies: 9
Views: 837

WTB 1924 Engine

This might be a long shot, but I would like to find a 1924 good rebuildable engine or block bearing the serial number as close to 9,495,000 (March 11) as possible. That was approximately the number of my 1924 Touring originally but since had been changed out due to a cracked block 30 years ago. Ple...
by SurveyKing
Sun Mar 07, 2021 6:46 pm
Forum: Classifieds - Parts
Topic: SUNDAY SWAP MEET
Replies: 9
Views: 770

Re: SUNDAY SWAP MEET

Hi Mark,
I will take number 13, inlet and outlet connections. Will post to pay pal.

Daniel
by SurveyKing
Sat Mar 06, 2021 9:03 pm
Forum: Old Photos
Topic: Model T ID?
Replies: 1
Views: 823

Re: Model T ID?

How did you get it in color? Whoever did the coloring did a fine job. I would say 19-22 model.
by SurveyKing
Sat Mar 06, 2021 10:44 am
Forum: Classifieds - Parts
Topic: Many Model T Parts For Sale. Mostly Later Model T Parts. Send Me Your Needs.
Replies: 3
Views: 387

Re: Many Model T Parts For Sale. Mostly Later Model T Parts. Send Me Your Needs.

Bill,
Looking for 23-25 switch plates with or without ammeter, but with good pot metal key hole. Thanks
Danielsnell2@twc.com
by SurveyKing
Thu Mar 04, 2021 8:59 pm
Forum: Classifieds - Parts
Topic: FS 1916 & 1924 engine blocks and New parts.
Replies: 9
Views: 913

Re: FS 1916 & 1924 engine blocks and New parts.

Hi Steve,
Can you give me the serial numbers for the 1924 block please. Danielsnell2@twc.com
by SurveyKing
Thu Mar 04, 2021 8:48 pm
Forum: Classifieds - Parts
Topic: For Sale: '09 - '10 Headlamp Brackets
Replies: 2
Views: 269

Re: For Sale: '09 - '10 Headlamp Brackets

Hi Steve,
I would like these if you still have them.
by SurveyKing
Sat Feb 27, 2021 8:54 pm
Forum: Classifieds - Parts
Topic: WTB Hot Air pipe for 23-24
Replies: 3
Views: 303

Re: WTB Hot Air pipe for 23-24

Hi Steve, should have checked with you first. Can you send me some pics and prices?

Thanks
Danielsnell2@twc.com
by SurveyKing
Sat Feb 27, 2021 3:55 pm
Forum: Classifieds - Parts
Topic: WTB Hot Air pipe for 23-24
Replies: 3
Views: 303

WTB Hot Air pipe for 23-24

I would like to buy a hot air pipe for my 1924 Touring. Good used original or old repo, please post here or email to DanielSnell2@twc.com
Thanks
by SurveyKing
Sat Feb 13, 2021 10:30 am
Forum: General Discussion Forum (started 2019)
Topic: Unknown Part - 1924
Replies: 12
Views: 1168

Re: Unknown Part - 1924

Ten Four, thanks
by SurveyKing
Fri Feb 12, 2021 4:49 pm
Forum: General Discussion Forum (started 2019)
Topic: Unknown Part - 1924
Replies: 12
Views: 1168

Re: Unknown Part - 1924

Would you care to sell them to me Original Smith?
by SurveyKing
Thu Feb 11, 2021 5:41 pm
Forum: General Discussion Forum (started 2019)
Topic: Unknown Part - 1924
Replies: 12
Views: 1168

Re: Unknown Part - 1924

Original, are there two for each windshield stanchion? One short and one long?
by SurveyKing
Wed Feb 10, 2021 8:57 pm
Forum: General Discussion Forum (started 2019)
Topic: Unknown Part - 1924
Replies: 12
Views: 1168

Re: Unknown Part - 1924

So are there supposed to be two, one for each stanchion?
by SurveyKing
Wed Feb 10, 2021 4:35 pm
Forum: General Discussion Forum (started 2019)
Topic: Unknown Part - 1924
Replies: 12
Views: 1168

Unknown Part - 1924

In going through labeled bolts/nuts from the disassembly of my 1924 Touring, I cannot seem to recall where this part came from. It was in a bag of bolts marked Cowl/Dash. The piece is steel and measures 1 1/2" by 1/2" by 1/4" thick and is threaded to accept the threads on the screw shown. Can someo...
by SurveyKing
Wed Feb 10, 2021 1:42 pm
Forum: General Discussion Forum (started 2019)
Topic: Correct 1924 Cowl Fasteners
Replies: 7
Views: 490

Re: Correct 1924 Cowl Fasteners

Rich
I would guess the two outer carriage bolts would be 1 1/2 or 2 inches long to get through the pillar where the center two are maybe 3/4 inch long or so.
by SurveyKing
Sun Feb 07, 2021 10:36 pm
Forum: Classifieds - Parts
Topic: MODEL T TIMES COLLECTION FOR SALE
Replies: 4
Views: 546

Re: MODEL T TIMES COLLECTION FOR SALE

Stan,
I just sent you a detailed email of my needs. Thanks
Danielsnell2@twc.com
by SurveyKing
Sun Feb 07, 2021 4:07 pm
Forum: General Discussion Forum (started 2019)
Topic: Correct 1924 Cowl Fasteners
Replies: 7
Views: 490

Re: Correct 1924 Cowl Fasteners

Thanks Original, I will use your design rivets for that as well!
by SurveyKing
Sun Feb 07, 2021 1:36 pm
Forum: General Discussion Forum (started 2019)
Topic: Correct 1924 Cowl Fasteners
Replies: 7
Views: 490

Re: Correct 1924 Cowl Fasteners

Thanks for posting Rich. Are the two upper fasteners Carriage bolts? What is the wrench size for the two upper hex nuts?
by SurveyKing
Sun Feb 07, 2021 11:52 am
Forum: General Discussion Forum (started 2019)
Topic: Correct 1924 Cowl Fasteners
Replies: 7
Views: 490

Re: Correct 1924 Cowl Fasteners

If anyone has original photos that shows the bolts fastening the cowl to the firewall, please post. Thanks
by SurveyKing
Sat Feb 06, 2021 9:24 pm
Forum: General Discussion Forum (started 2019)
Topic: Correct 1924 Cowl Fasteners
Replies: 7
Views: 490

Correct 1924 Cowl Fasteners

Would someone post the correct size and type of bolts and nuts needed to fasten the cowl to the body and to the firewall please. My car had a mismatched variety when disassembled. There are four places to fasten to the firewall and two or more to the body I think, please correct me if I am wrong, T...
by SurveyKing
Sun Jan 24, 2021 3:51 pm
Forum: General Discussion Forum (started 2019)
Topic: Windsor Maroon
Replies: 23
Views: 1658

Re: Windsor Maroon

Thanks James, I sent him an email. As far as the color, we want the darker Merlot color you have identified on your color chart. Those designations are they not modern ones?
by SurveyKing
Sat Jan 23, 2021 8:19 am
Forum: General Discussion Forum (started 2019)
Topic: Windsor Maroon
Replies: 23
Views: 1658

Re: Windsor Maroon

Does anyone have contact information for Don Booth in Michigan? I'd like to talk to him about his Windsor Maroon. Thanks
by SurveyKing
Fri Jan 22, 2021 11:00 pm
Forum: Classifieds - Parts
Topic: Correct wood wheel hub nuts now available UPDATE
Replies: 21
Views: 2422

Re: Correct wood wheel hub nuts now available

RV , I will send you my new address via email.

Thanks my friend

Daniel
by SurveyKing
Fri Jan 22, 2021 8:58 am
Forum: Classifieds - Parts
Topic: Correct wood wheel hub nuts now available UPDATE
Replies: 21
Views: 2422

Re: Correct wood wheel hub nuts now available

RV, I'll take a set of bolts and nuts.

Daniel Snell
by SurveyKing
Thu Jan 21, 2021 5:48 pm
Forum: Classifieds - Parts
Topic: Early carb connection elbows for sale
Replies: 12
Views: 1242

Re: Early carb connection elbows for sale

Tim,
I will take one. Thanks
Daniel
by SurveyKing
Thu Jan 21, 2021 5:05 pm
Forum: General Discussion Forum (started 2019)
Topic: Windsor Maroon
Replies: 23
Views: 1658

Re: Windsor Maroon

Hi Tim, That is a nice Sedan. Is that in Urethane Enamel single stage by chance? If so, would you mind giving me the paint brand and code you used? Thanks
by SurveyKing
Thu Jan 21, 2021 2:33 pm
Forum: General Discussion Forum (started 2019)
Topic: Windsor Maroon
Replies: 23
Views: 1658

Re: Windsor Maroon

Vernon, Windsor Maroon, I am told, is almost brown, that color for Royal Maroon is reddish color, so maybe that is not a match. How did you determine Royal Maroon was a match?
by SurveyKing
Thu Jan 21, 2021 1:18 pm
Forum: General Discussion Forum (started 2019)
Topic: Windsor Maroon
Replies: 23
Views: 1658

Windsor Maroon

I am hoping that either the MTFCA or MTFCI have come up with an acceptable modern paint code for Windsor Maroon used in 1926-27 closed cars. I have a friend that wants to paint his car with single stage urethane in Windsor Maroon. If someone recently went thru this process, please let me know what ...
by SurveyKing
Wed Jan 13, 2021 8:52 am
Forum: Classifieds - Parts
Topic: FS HUB THREAD CHASER
Replies: 4
Views: 692

Re: FS HUB THREAD CHASER

Mark,
If you have another, shoot me an email please.
DanielSnell2@twc.com
Thanks
by SurveyKing
Tue Jan 12, 2021 7:26 pm
Forum: Classifieds - Parts
Topic: FS High Firewall
Replies: 1
Views: 308

Re: FS High Firewall

Can you post some clearer photos? I cannot tell if it has 2 or 4 holes to mount the data plate. Please send to DanielSnell2@twc.com
by SurveyKing
Sun Jan 10, 2021 4:36 pm
Forum: Classifieds - Parts
Topic: WTB: Two Piece Dash Clips ‘09-11
Replies: 15
Views: 923

Re: WTB: Two Piece Dash Clips ‘09-11

Hi Austin, send me your email and I'll send you some pics of what I think you may be looking for.
DanielSnell2@twc.com
by SurveyKing
Sun Jan 10, 2021 4:29 pm
Forum: Classifieds - Parts
Topic: WTB: Two Piece Dash Clips ‘09-11
Replies: 15
Views: 923

Re: WTB: Two Piece Dash Clips ‘09-11

Austin, I sent you an email with photos.
by SurveyKing
Sun Jan 10, 2021 2:59 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter Switch Problem
Replies: 30
Views: 1944

Re: Starter Switch Problem

Sorry guys, the yellow wire that comes from the starter loom sleeve is connected to the upper or inner connection point which goes directly to the battery. The black wire is the tail lamp wire that is part of the loom. Left hand connection (closest to the frame rail) is the starter loom with sleeve...
by SurveyKing
Sun Jan 10, 2021 12:36 pm
Forum: General Discussion Forum (started 2019)
Topic: Starter Switch Problem
Replies: 30
Views: 1944

Re: Starter Switch Problem

I just connected up my starter switch to test and it started smoking after about 5 seconds. Starter turned over but slower than it should. I am wondering if my switch is bad or if my wiring is not correct. See photos.
Starter switch.jpg
Starter switch wiring (2).jpg
[/size][/b]
by SurveyKing
Sat Jan 09, 2021 6:44 pm
Forum: General Discussion Forum (started 2019)
Topic: What have you done with your T in January?
Replies: 56
Views: 4605

Re: What have you done with your T in January?

Today I parked my 1925 Pickup in our new garage. I can finally walk around it from all angles without feeling crowded!
1925 Pickup in New Garage 1 (2).jpg
1925 Pickup in New Garage 3 (2).jpg
1925 Pickup in New Garage 2 (2).jpg
[/size][/b]
by SurveyKing
Tue Jan 05, 2021 8:31 pm
Forum: General Discussion Forum (started 2019)
Topic: 1923-25 Coil Box Differences
Replies: 24
Views: 1309

Re: 1923-25 Coil Box Differences

Jeff, that may be a good question for the rebuilder. The metal portions were well done, the wood sealed, the contacts replaces and the connector strip replaced all with new. Correct me if I am wrong, but the critical issue is whether the wood will absorb moisture causing a short. I am spraying it a...
by SurveyKing
Tue Jan 05, 2021 8:11 am
Forum: Classifieds - Parts
Topic: WTB Magneto Post
Replies: 3
Views: 391

Re: WTB Magneto Post - FOUND

Thanks MTFCA I found the mag post.
by SurveyKing
Mon Jan 04, 2021 9:17 pm
Forum: General Discussion Forum (started 2019)
Topic: 1923-25 Coil Box Differences
Replies: 24
Views: 1309

Re: 1923-25 Coil Box Differences

After dismantling the box, I found both wires running to the bottom contact plate. See photos. (There is a wire under the tape on the left for the ninth connector) Now if I remove the blue wire for the tenth contact and the connector that is all that is needed, correct? Coil Box Interio.jpg Coil Bo...
by SurveyKing
Mon Jan 04, 2021 2:16 pm
Forum: General Discussion Forum (started 2019)
Topic: 1923-25 Coil Box Differences
Replies: 24
Views: 1309

Re: 1923-25 Coil Box Differences

Mark, thanks for that information, it makes perfect sense, My box does not have a switch on the front as is for 1924 firewall, so I will dismantle and remove the tenth connector. Thanks to all who have taken the time to add input, I wonder how many people realize the ten verses the nine connectors,...
by SurveyKing
Mon Jan 04, 2021 11:23 am
Forum: General Discussion Forum (started 2019)
Topic: 1923-25 Coil Box Differences
Replies: 24
Views: 1309

Re: 1923-25 Coil Box Differences

Steve, the original box I had was dinged up so I replaced it with a rebuilt one but did not expect to get 10 connectors instead of 9. This is the later style without the switch on the front so am trying to figure a way to make it work for me. Charlie, thanks for you suggestion, I will check that ou...
by SurveyKing
Mon Jan 04, 2021 10:35 am
Forum: General Discussion Forum (started 2019)
Topic: 1923-25 Coil Box Differences
Replies: 24
Views: 1309

Re: 1923-25 Coil Box Differences

Thanks for chiming in here Original, the situation is that I purchased a rebuilt coil box which is for 23-25 era, however it came with 10 connectors instead of nine. My question is, what should I do with the tenth connector and wire to make this coil box work for me. The wire loom is the standard s...
by SurveyKing
Mon Jan 04, 2021 8:52 am
Forum: General Discussion Forum (started 2019)
Topic: 1923-25 Coil Box Differences
Replies: 24
Views: 1309

Re: 1923-25 Coil Box Differences

What should be done with the 10th connector? Just disconnect the threaded screw from the box, then what about the wire that goes do it?
by SurveyKing
Sun Jan 03, 2021 9:34 pm
Forum: General Discussion Forum (started 2019)
Topic: 1923-25 Coil Box Differences
Replies: 24
Views: 1309

1923-25 Coil Box Differences

Recently I acquired the Coil Box G to replace an older one E that I had. I now realize a significant difference in the two. Both are supposed to be 1923-25 era but as you can see one has 9 contacts and the other 10. My steel firewall on my 1924 has only 9 holes for the 9 contacts on Coil Box E. Wha...
by SurveyKing
Sat Jan 02, 2021 3:22 pm
Forum: Classifieds - Parts
Topic: WTB Magneto Post
Replies: 3
Views: 391

Re: WTB Magneto Post

Email sent to Rajo, Thanks Mark
by SurveyKing
Fri Jan 01, 2021 8:41 pm
Forum: Classifieds - Parts
Topic: WTB Magneto Post
Replies: 3
Views: 391

WTB Magneto Post

Looking to buy a good solid original Magneto Post for my 1924 Touring Ford Part Number 3260. Will consider an original type reproduction as well. Email me at DanielSnell2@twc.com Thanks
by SurveyKing
Tue Dec 22, 2020 11:26 pm
Forum: General Discussion Forum (started 2019)
Topic: Which Cowl Lacing set is correct for 1924?
Replies: 10
Views: 863

Re: Which Cowl Lacing set is correct for 1924?

Larry, I could not find in the Ford Service Manual where it talks about the cowl lacing size. It does have a few photos one of which shows the head of the rivet to be exposed to the outside. Another thing is the two sets from venders have either black or nickel rivets not brass. It seems that brass...
by SurveyKing
Sun Dec 20, 2020 11:42 am
Forum: General Discussion Forum (started 2019)
Topic: Which Cowl Lacing set is correct for 1924?
Replies: 10
Views: 863

Re: Which Cowl Lacing set is correct for 1924?

Also like to mention that both sets came from vendors marked "Cowl Lacing" with rivets so could not be mistaken for radiator shell lacing
by SurveyKing
Sun Dec 20, 2020 11:18 am
Forum: General Discussion Forum (started 2019)
Topic: Which Cowl Lacing set is correct for 1924?
Replies: 10
Views: 863

Re: Which Cowl Lacing set is correct for 1924?

Dan, Are the rivet heads or tangs exposed on the outer surface on your original 24?
by SurveyKing
Sat Dec 19, 2020 7:01 pm
Forum: General Discussion Forum (started 2019)
Topic: Which Cowl Lacing set is correct for 1924?
Replies: 10
Views: 863

Which Cowl Lacing set is correct for 1924?

Which of the two cowl lacing sets would be correct for 1924 steel firewall? The one on the left is 3/8" the right is 1/2"
Cowl Lacing sets.jpg
[/size][/b]
by SurveyKing
Wed Dec 16, 2020 11:18 pm
Forum: General Discussion Forum (started 2019)
Topic: Front view of original 24-27 Ford TT Truck needed
Replies: 10
Views: 821

Re: Front view of original 24-27 Ford TT Truck needed

Thanks for the nice photos guys. Allan, sorry, I do not know about the engine mount difference if any on the TT. I was helping Julius Neunhoffer out on a project of his, but will ask him for you next time I see him.
by SurveyKing
Wed Dec 16, 2020 1:43 pm
Forum: General Discussion Forum (started 2019)
Topic: Front view of original 24-27 Ford TT Truck needed
Replies: 10
Views: 821

Front view of original 24-27 Ford TT Truck needed

If someone out there has a frontal view of an original 1924-27 TT Truck, please post it here or email me. We are trying to match the radiator shield and fender apron and want to study original photos. Thank you
by SurveyKing
Thu Nov 26, 2020 9:52 pm
Forum: General Discussion Forum (started 2019)
Topic: 1924 Hood shelf question
Replies: 25
Views: 1388

Re: 1924 Hood shelf question

Interesting responses. It looks like it was not that uncommon. I can say for sure that mine is an original.
by SurveyKing
Thu Nov 26, 2020 10:59 am
Forum: General Discussion Forum (started 2019)
Topic: 1924 Hood shelf question
Replies: 25
Views: 1388

1924 Hood shelf question

I am at a loss as to what the hole on the end of the hood shelf off my 1924 Touring. Can anyone shed some light on this? Thanks
1924 Hood Shelf.jpg
[/size][/b]
by SurveyKing
Fri Nov 13, 2020 8:10 am
Forum: General Discussion Forum (started 2019)
Topic: Advice Needed to Install Trans Cover
Replies: 27
Views: 1711

Re: Advice Needed to Install Trans Cover

Does anyone see any issue with installing the reverse and brake pedals after the cover is secured? Seems like it could be done that way, might make it easier to deal with.
by SurveyKing
Sun Nov 01, 2020 11:49 pm
Forum: General Discussion Forum (started 2019)
Topic: Advice Needed to Install Trans Cover
Replies: 27
Views: 1711

Re: Advice Needed to Install Trans Cover

Thanks Thanks Allan for you advice. The RTV sealant directions say to assemble the parts within 5 minutes. There seems to be a lot of steps here and I am not sure about being able to do that the first time without practice. I believe I will attempt a couple of practice without sealant to see how lo...