MTFCA Forum

I have a Nash setup on my car. Works ok but the speed registers low. Suspect I have the wrong gears in it. Does anybody have setup information or spare parts on these?

Hi, I'm kind of new here, and I know this is probably a long shot, but is there a group, or agency, or company, that help younger people, and teenagers buy classic cars? I've appealed to all of my close relatives, and no one has ever owned, or wants to own a Model T, but it has been my biggest life goal for about 2 years now. Does anyone know...

Anyone happen to have one of Bob's tail piece alignment castings not being utilized ? Top dollar paid or possible trade for goodies ! I realize there are other castings available but not to my liking ! Thanks for looking !

If not mistaken-which happens alot- believe these are for 9 leaf. 25.00 for the pair plus shipping. ctleonard64@gmail.com IMG_20250521_131455207.jpg IMG_20250521_131513673.jpg

Old, original Aermore four (4) tube - 13 , 10 3/8 , 9 , and 6 3/4 Brass exhaust whistle mostly covered with probably close to a century of tarnish and road dust. Some folks like the patina of old, so I left it unpolished, as found. However, I did polish a small section to show an interested individual that it is indeed brass, and will shine...

Facebook link is for the Hank Lee M1 Rebel.

If you have not seen the build video, here it is:

I just got my 22 out for the first time this year and I am having an odd problem. It’s running a bit rougher than normal but accelerated ok in low. But when I shift to high it lags and there seems to be a bit of a shudder. I adjusted the bands the other day to get just a touch more bight on the low and brake pedals, but only a turn or so. It drove...

30.00 plus shipping. ctleonard64@gmail.com IMG_20250521_124847300.jpg IMG_20250521_124842166.jpg IMG_20250521_124827746.jpg IMG_20250521_124816157.jpg

Great for speedsters. These were ran back in the day. The Lynnwood flathead dragster makes for good reading. 100.00 plus shipping. Ctleonard64@gmail.com IMG_20240510_094320261.jpg IMG_20240510_094332361.jpg IMG_20240510_094338489.jpg IMG_20240510_094348020.jpg

Actually the whole rear end. Two-piece driveshaft, forged end radius rods, 13 -14 rear end,, Chicago duplex cantilever spring assiste. Richmond is coming, I'm in mt.vernon Indiana. Come load your truck. 800.00 for driveshaft alone. If you take it all( minus wheels) the price is 1250.00. ctleonard64@gmail.com IMG_20240524_150239587.jpg...

I'm in need of two 26/27 rear emergency drake drums.
Thanks, Steve

The cotton linings look a lot like cotton web you can buy by the roll off Amazon, can I use cotton web that's the right width and length of course? (I need to just replace my low band)

I am in the process of building a speedster using a Rootlieb speedster kit and I need a set of 1911-14 Frame to Firewall Brackets.

I'd like to buy one set of Mospico offset type spindles.

Please send me a picture of what you may have, and $$ wanted.

Thank you.

Model T Offset Spindles.jpg

Here are some more question I have asked before in the past but never received a good answer. I always been confused about the difference between the Model T Instruction Book VS the Ford Manual. This is a 1913 Model T Instruction Book:
ModelT_Early 1913_Instruction Book_Fourth Edition June 1912_From Lau collection.jpg
This is a 1913 Ford...

Been blasted and all old grease cleaned out. All rivets are tight. 75.00 plus shipping. ctleonard64@gmail.com IMG_20250521_111847138.jpg IMG_20250521_111830766.jpg IMG_20250521_111816120.jpg IMG_20250521_111801382.jpg

Antique car conversion chart.jpg

This is the BEST pre-war swap meent in Northern California! We will have a space once again.Looking forward to seeing Model T Forum members once again at this great swap meet! I'll be the guy in the Engineers Bibs. Stop by and say Hi! ML Swap meet 2025.jpg

Nickle plated brass ball valve (made in Italy) that due to it's construction, has the best throughput of any valve available
all brass construction of USA made fittings - NO COPPER line to fatigue or damage when tightening onto the carb (the removable connection is a double-ferrule design which is an industry standard industrial fitting designed...

Believe these to be 11-12 only because of the countersunk holes. Also believe they are reproduction. 60.00 plus shipping. ctleonard64@gmail.com IMG_20250317_083355064.jpg IMG_20250317_083440522.jpg IMG_20250317_083415819.jpg

Helping a guy that has a 1912 put together car with a lot of incorrect parts.
Ran out of threads on the tie rod and still have too much toe in, over 1/2 . The tie rod is 46-3/4 which from what I can find is correct.
Thinking might have bent spindle arm. I noticed an approx. 3/8 difference when measuring from the inside face of the spokes to...

First time wheel rebuilding. They're Hayes wheels, bought Hayes spokes. First problem was the tenon was slightly too big to press into the fellow. Turned one set down, as an experiment (before doing all 48). Got them pressed in.

IMG_2079.jpeg

Was all excited then decided to mount it on the car and spin, wobbly. About a 1/2 ! So I check the...

I should stick to stemwinders. But I am not...

I don't like the location of the original starter button, so I am wiring a solenoid in my wife's 6v speedster (negative ground) and have found two vastly different wiring diagrams:

solenoid wiring 1.png

This diagram makes sense to me. The solenoid takes the place of the original button and a new...

For sale 10 tooth pinion gear
$80 free usps in the usa.
Just washed it off so you can see it.
Nice used condition.

Has a couple of miles on her. Still a respectable hood. 150.00 plus shipping. ctleonard64@gmail.com IMG_20250520_095048694.jpg IMG_20250520_095027444.jpg IMG_20250520_095018882.jpg IMG_20250520_095248930.jpg IMG_20250520_095245891.jpg

Looking for a pair a single or parts for E&J Model 66 headlights (the black and brass type). Also does anyone know of a person or service that restores brass headlights?

Thanks

MAJOR widespread flooding in Taree and surrounding areas, unprecedented rainfall with more heavy rain forecast (as of recording this video).
Definitely NOT Model T driving weather! Over 300mm (12 inches) of rain have fallen on Taree and the Manning Valley in the past 24 hours since posting this. The Australian Bureau of Meteorology is forecasting...

Two Stewart Speedometer Roads gears #1322 (60 tooth). In good condition. Price is $30.00 each plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

20250516_161818.jpg

I am new to the Model T community but not to early cars. I am in the process of reassembling my 1912 engine and looking for tips on reassembly for such info as torques, avoiding oil leaks etc. I can't find such info in the club restoration videos or the club utube channel. Am I missing something? I do have the black book which is helpful....

Pair of e and j 440 headlights. Blasted and primed. Good solid buckets. Both reflecters are good. One brass ring has a missing lens clip on the bottom. I believe the arms are early 15, but the adjuster screw is on the left. I don't know the relation to the screws left or on top. 200.00 plus shipping. ctleonard64@gmail.com...

I’d like to put something out there that never really seems to get mentioned about the Prus head. Of course the power difference it offers is a noticeable improvement on our cars, but the one aspect that seems to be overlooked is what that additional compression does for the engine’s retarding ability on long downgrades.

I live in the flatlands...

I’m located in Southern California and I want to buy a T chassis with an engine. My budget is $1000-$2500

Located in mt.vernon Indiana. A fairly nice homemade touring body. Make me an offer. ctleonard64@gmail.com IMG_20250520_100300791.jpg IMG_20250520_100237572.jpg IMG_20250520_100214284.jpg

I need two rods for a rebuild. The two that were taken off have lost a good amount of thread due to rust.

Thanks for any help.

Scott

Found these at a recent estate sale. Not likely T. Similar to Model A front axle spring perch. I'm calling on the antique car gurus to possibly identify the application.

20250516_114821.jpg

20250516_114850.jpg

20250516_114902.jpg

20250516_114914.jpg

Besides Freighter Jim, are there other reliable shippers for Model Ts. I used Bill's in the past but I think he is no longer doing pickup and delivery. Thank you.

On the California Rendezvous tour last week, my 1913 touring turned over 56,000 miles. It still has the original engine. I've owned this car since 1961, and finished restoring it in 1963. Can anyone top that?

This 1931 Model A Tudor was owned by a gentleman who suddenly passed last year. I am trying to sell it for his wife. Needs work but not dents on the body. I have no idea about the engine. $10,000. Located in Bullhead City, Arizona.

Hello,
I need another 1912 front fender iron. Preferably the one with the eyelet or no cutout at all (i.e. I'll drill it myself)
If you have one, please let me know. Thanks!

I have an update on my quest for back issues of Vintage Fords. The Museum did not have what I was looking for. I have been able to find a few. I am still seeking these issues:

All of Volume 1
Volume 3 Number 2
Volume 17 Number 6
Volume 18 Number 6
Volume 19 Number 2 and 6
Volume 23 Number 6
Volume 37 Number 6

Any help would be much appreciated...

Due to continuing health problems, I am offering the following for sale:
A
Complete and running 1914 chassis with the engine casting
date of 2-3-1914
New Tires, new fuel tank, new brass & oak steering wheel
Excellent radiator, Bee Hive Hasslers at all four corners.
POR painted and completely detailed chassis.
POR Ultra High Heat Painted...

It came in today. Already looked the thing though once.

It's a shame no modern manufacture makes new cotton linings, nos ones would get all used up one day. But anyways I need preferably a set for a 17, I know the 26-27 were different but idk how they differ year by year if at all prior to 26. Thanks.

Edit: just went to s dentist, it looking pricy, I can no longer buy anything for the t till I'm done...

Hello,

This is Steven Cross with Zink Motor Company Ford in Appleton City MO. I am wanting to see if anyone has photos of a T era dealership that includes closed garage door/s? We are a 112 year old Ford dealership operating in a 107 year old Ford designed building. I am compiling a project list for a local historic preservation grant...

I have acquired a CenterDoor with A/C Brakes that I am totally unfamiliar with.
Does it look like they are mounted correctly?
How do I go about adjusting them?
Thanks,
Dave

35.00 plus shipping. ctleonard64@gmail.com IMG_20250520_123048039.jpg IMG_20250520_123104135.jpg IMG_20250520_123057123.jpg

Hi All, I am looking for a 26/27 Left Rear Brake Arm/Lever. Please contact me if you have one for sale. I can remove the arm from the shaft if needed

Thanks

Tim

American Bosch 600 series Distributor complete gears, pin, spacer. Has been disassembled, cleaned, lubed, adjusted & bench tested. $200 plus
the ride If you are concerned about replacement parts Tom Van Meeteren has lots of replacement parts. IMG_3493.jpg IMG_3494.jpg
Craig.

a couple years ago I asked if anyone had been in the situation of only being able to go in reverse, no forward low or high. no one ever had that problem. I didn't want to tear the engine apart, so it sat on the back burner for a bit. I wondered if the pinion gear could be spinning loose going forward and tightening up in reverse, I took the rear...

Does not leak. In mt.vernon Indiana. 425.00 prefer not to ship. ctleonard64@gmail.com IMG_20250520_100819582.jpg IMG_20250520_100725034.jpg IMG_20250520_100745152.jpg

I have what I thought were two early front Model T wheels.
But there is a difference. One on the right is standard 30x3 and the one on the left is smaller outside dimensions. 2 inches smaller on the rim diameter. Both are wood fellow w / oval spokes. What is the smaller one? IMG_1800.jpeg
IMG_1801.jpeg IMG_1802.jpeg

i have 2 -- 26-7 frames,rear axle housings,radius rods,hogs heads,4 dip pans,engine blocks, Send me an e-mail with needs and for pricing. Dennis

Hello,

I have a '26 touring where the steering wheel has a good two-inches of play. All connections from the pitman down are good. I suspect the play is in the steering box.

Assuming my suspicions are correct, can the problem be solved by replacing the pins, gears, and pinion?

Also, can this work be accomplished with the steering column...

I have a set of '26 roadster sill plates that are semi decent except for a couple cracks. Is zinc repairable?

Have an original firewall bracket for pass. Side. 30.00 plus shipping. ctleonard64@gmail.com 17476797024964535630028639782110.jpg 17476797273017096173120909720160.jpg

Nice south bend lathe, circa 1940. New drive belt, 3 jaw and 4 jaw chuck, steady rest and full set of collets. Lots of cutting tools and other accessories. 9 inch swing and 48” bed. 120 volt. $750. Pick up only, Los Angeles. kdmks AT att.net.

Manifold clamp and bolt set (25-27). Includes new studs and nuts. Price WAS $30.00 NOW $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_103229.jpg

This is a mint as new low profile radiator cap new in the original box. Asking $50 plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING !
cap 1.jpg cap 2.jpg cap 3.jpg cap 4.jpg

I have a spare Black Decker valve machine. These are the same as a Van Dorn too. I was keeping for spare parts. Since I have another spare I need to get rid of one or part it out. Any interest? If so email me by the forum. I will try and post a picture in next day or so. Thanks Dan

The Mighty Ahooga Head.jpg

The visual impact of a Brass-Era automobile is so striking, it can overshadow the other senses, which is kind of a shame because the way these cars sound is also wonderfully unique, and everyone who works with them just loves the low-revving grumble of a long-stroke engine and the kisskisskisskiss idle of an L or...

Has anyone lost their home or Model T due to the weather this week?

Norm

Early Kingston carb ready to restore. 40.00 plus shipping. ctleonard64@gmail.com IMG_20250519_150119563.jpg IMG_20250519_150106608.jpg IMG_20250519_150019228.jpg IMG_20250519_150055944.jpg IMG_20250519_150052696.jpg

My Flivver Still Hates Me E png.png

After my last few breakdowns on the road, I thought long and hard about what could be my repetitious problem. My Model T Ford would run happily for about a mile, and then it would surge and buck and the engine would quit. My previous problem with an very rough-running engine had been cured; and now, when the...

Does anyone have plans to build a magnet re-charger using a recycled transformer?

Rusty but no holes. Still solid. One has a good reflecter. 15.00 for the pair plus shipping. ctleonard64@gmail.com IMG_20250519_094915793.jpg IMG_20250519_095328813.jpg IMG_20250519_094938681.jpg

Not quite sure of it. Has a wild lense to it, like little star burst with no cracks. Threads will need to be chased. 40.00 plus shipping. ctleonard64@gmail.com IMG_20250519_112726559.jpg IMG_20250519_112710959.jpg IMG_20250519_112743690.jpg IMG_20250519_112656405.jpg IMG_20250519_112852920.jpg

Appears to be all there. 40.00 plus shipping. ctleonard64@gmail.com IMG_20250519_105036058.jpg IMG_20250519_105057356.jpg IMG_20250519_105042049.jpg IMG_20250519_105158205.jpg

picture number one illustrates that the two studs hoilding the cover are alined with the control knob. This is the way all seem to be. picture number two is the timer I bought last month. the two studs holding the cover are off set from the knob by 90 degrees. Has anyone seen or have a two piece timer that is like number two?

One pair for 20.00 plus shipping. ctleonard64@gmail.com IMG_20250519_103848234.jpg IMG_20250519_103856424.jpg

Is it 17-25? In good shape, no dents. 40.00 plus shipping. ctleonard64@gmail.com IMG_20250519_100527028.jpg IMG_20250519_100505196.jpg IMG_20250519_100500207.jpg IMG_20250519_100453139.jpg

A gaggle of grease cups. Price for the lot is WAS $20.00 NOW $15.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250515_100827.jpg

I need to put an oil pressure gauge on my speedster. Using a Datsun B-210 oil pump, what oil pressure would I expect? What gauge range should I use?

20250415_155424.jpg

: ^ )

Keith

Hi all, I hoping for some history on the aftermarket gas tank suppliers.

Not available? Who has the patterns for inlet and outlet castings? Was the business offered for sale?

I plan on making one for my 09 . The sheet metal forming doesn't look that difficult. I'd prefer not to rob my original tank parts for the project.

Anyone else needing...

I just noticed that my two T's have different connections at the draglink/pitman arm connection.
Which is correct? Bolts and safety wire, or nut and lock washer?
wired2.jpg
wired.jpg

I have three complete Model T chassis for sale. Selling all three for $4,000. Located in Lake Elsinore, CA. Pick up only. Call for further information. Mark Chaffin (951) 805-0928

20221011_091809.jpg

20221011_091758.jpg

20221009_100651.jpg

20221009_100700.jpg

20221009_100723.jpg

Due to continuing health care issues, I regretfully have decided to sell my final build project that is beyond my present physical condition. It is a brand new, never been mounted
Richard Currier 1912 Delivery Car (C Cab) body complete.
I have continuing problems trying to post photos on this website so I have several photos of the body, always...

This is a mint condition period accessory that replaces the standard carburetor needle. It thermostatically adjusts the carburetor mixture as you drive using a Bi-metallic strip. Comes with the original instruction sheet pictured. Asking $65 plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! tomco one.jpg tomco 4...

1916 Touring – Southern California ($8,500)

I purchased this car a few years ago to restore but unexpectedly ended up inheriting my father’s Touring (past MTFCA president and BOD). The engine serial number (casting date 6-12-16) matches the registration going back to 1956. The car runs on battery and magneto and is fun to drive. It can either be...

Just a reminder that today is the deadline for Early Bird registration for the Homecoming Swap Meet spaces.

After today, the price goes up so call us before 5:00 (EST) to reserve your spots. You don't want to miss the event!

For Sale used set 11-40 gears.
$75 plus shipping

T gears.jpg

For Sale: 1914 Wood Steering Wheel with cast iron spider.
12-3/8 ID.

$150 plus shipping

1914 steering wheel.jpg 1914 steering wheel 2.jpg

For Sale: Nos Wickwire starter spring.

$17 includes shipping to lower 48

wick wire T spring 2.jpg

For Sale: Nice original 1914 Ford Manual.

$150 includes shipping to lower 48.

Ford manual.jpg

Thanks to all who responded to my previous post. My 1916 with a 1921 engine is positive ground. To change it to negative ground I plan to:
1) reverse the battery cables
2) polarize the generator by briefly touching B+ to the field terminal
Should I disconnect the generator wire while I polarize the field (and reconnect it before I start the...

re-built distributor for model A Ford ... was used briefly on re-built engine that was upgraded to a high compression cylinder head and model B distributor ... probably less than 500 miles use on new bushings , points , condenser ...modern points plate etc. ...used cap is included to complete the unit ...price $100 + $19.15 flat rate postage in...

i have made another run of Quick Bolts for fitting the mainbearings in Models A and T Ford ( 4 sets ) ... these are made from mild steel bolt stock as the originals ... the quick bolt reduces the time and labor in fitting the mains by reducing the time needed to remove and tighten the original bolts ...set includes the 6 bolts , nuts and forked...

Does anyone out there in T land have a front seat cover for a touring model. I don’t need the back of the seat just the part one sits on. My cover is ripping and I would like to keep the more or less original covers that are not ripping. Thanks.

Price reduced to 225.00 including shipping in the USA. This reproduction brass spare tire mirror stands about 7 tall and the base is about 5 x 3 1/4 . The glass mirror is beveled and is about 4 in diameter. The polished brass is heavy including the cast brass base. The mirror is adjustable and it is tightened with the knurled knob. It is new and...

Price reduced to 325.00 including shipping in the USA. A great brass era accessory that is often called a Potato horn. This is a brass horn that has its original nickel plated surface but it can be stripped back to brass. The mounting, conduit, etc are nickeled over brass as well. The horn measures about 5 by 7 and the front to rear is about 36 ....

Free: I have about 8 boxes, each containing 1 gross (144 pcs) vintage Wood Screws, No. 10 Size, with Slotted Pan Heads, 1 length, made of plated steel. Length measured from bottom edge of the head to the point at the end of the shank. The box says these are round head but to me they look like pan heads, maybe the meaning has changed over the...