MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 292 matches

Topics

Replies

Views

Last post

25 Coupe needs flywheel and mag advice

Last post by Joe Bell « Thu Jan 26, 2023 7:43 pm
Posted in General Discussion Forum
Replies: 1
by Steve King » Thu Jan 26, 2023 7:33 pm » in General Discussion Forum

First post

20230126_142751.jpg Bought this 25 Coupe today. Going to need some engine work. Engine was good running good for last owner but broke a couple magnets. I'm assuming the field coil is going to be a mess. Previous owner removed the rest of the magnets. He bought a set of splash angles but decided not to finish the project. Debating whether I should...

Last post

A distributer is a fast fix, but if you lose a condensor your dead in the water, if you lose a coil you can limp home on three. if you are pulling hills with a heavy car the magnets give you some more climbing ability.

1 Replies

10 Views

Last post by Joe Bell
Thu Jan 26, 2023 7:43 pm
Yet another puzzle

Last post by Herb Iffrig « Thu Jan 26, 2023 7:36 pm
Posted in OT - Off topic
Replies: 342
by Rich P. Bingham » Sun Apr 10, 2022 11:26 am » in OT - Off topic
1

2

3

4
First post

Sis helping Dad to . . . ? An appealing photo, but what's the make and midel of the car ?? :lol: (No date or location for the pic)

Last post

You guys are something else!
342 Replies

18094 Views

Last post by Herb Iffrig
Thu Jan 26, 2023 7:36 pm
Steering Wheels FS

Last post by rickd « Thu Jan 26, 2023 7:31 pm
Posted in Classifieds - Parts

by rickd » Thu Jan 26, 2023 7:31 pm » in Classifieds - Parts

Lot of 2 steering wheels. Both 17 OD. $50.00 for the pair+$20.00 shipping. Check or money order. Email me through this site. w1.jpg w2.jpg

0 Replies

14 Views

Last post by rickd
Thu Jan 26, 2023 7:31 pm
WTB cast iron hot air pipe

Last post by Distagon2 « Thu Jan 26, 2023 7:28 pm
Posted in Classifieds - Parts
Replies: 18
by KimDobbins » Sun Aug 28, 2022 4:27 pm » in Classifieds - Parts

First post

Looking for a cast iron hot air pipe used in 1912. Thanks Kim Dobbins kdmks AT att.net.

Last post

Well please add me to this lengthy list as I am restoring a 1912. I will try to figure out how to get you my contact information. For some reason this sites DM and emailing doesn't work (or maybe everybody ignores me!) but I can be reached at Distagon2 AT aol dot com. I think you should be able to decipher that email, just read it out loud....

18 Replies

1122 Views

Last post by Distagon2
Thu Jan 26, 2023 7:28 pm
T going down hill

Last post by Art M « Thu Jan 26, 2023 7:19 pm
Posted in General Discussion Forum
Replies: 16
by John kuehn » Thu Jan 26, 2023 1:45 pm » in General Discussion Forum

First post

Here’s a T center door going down a San Francisco hill around 21-22. It looks like the gas lever is all the way up. Was he coasting and using any braking or?? It looks like the T is new or close to it.

Last post

The natural slope of Lombard street is about 16 degrees. The curves were added in 1922 to decrease the effective slope. This was because most cars at that time could not handle that steep of slope.

This picture could have been taken on Lombad street before the street was modified. My estimate of the slope in the photo is 16 degrees, which...

16 Replies

267 Views

Last post by Art M
Thu Jan 26, 2023 7:19 pm
Gray/Davis starter

Last post by Model T Matt « Thu Jan 26, 2023 7:11 pm
Posted in General Discussion Forum
Replies: 4
by Model T Matt » Wed Jan 25, 2023 7:30 pm » in General Discussion Forum

First post

Looking for picture-instructions for Gray Davis Starter have one that was on a 1914 T the Chain that goes from starter to Crank is missing looking for chain or something to see what it looked like Thanks Matt Madison 503-824-2681

Last post

thanks for info on chain dist. will have to get a measurement and pitch

4 Replies

237 Views

Last post by Model T Matt
Thu Jan 26, 2023 7:11 pm
WTB - Brake Rods 1920-1925

Last post by OldFord « Thu Jan 26, 2023 7:08 pm
Posted in Classifieds - Parts
Replies: 6
by SurveyKing » Tue Jan 24, 2023 5:59 pm » in Classifieds - Parts

First post

I am looking to purchase as quickly as possible a pair of good used brake rods for my 1924 Touring. Must have good threads that will chase well and no wallowed-out holes in the end where it attaches to the brake cam lever. Thank You

Daniel Snell
Danielsnell2@twc.com

Last post

No problem, if you change your mind, they will be here...

6 Replies

170 Views

Last post by OldFord
Thu Jan 26, 2023 7:08 pm
W T B--1913 roadster body or project car

Last post by Burlingtontguy « Thu Jan 26, 2023 7:07 pm
Posted in Classifieds - Parts
Replies: 9
by Burlingtontguy » Sun Jan 08, 2023 8:51 pm » in Classifieds - Parts

First post

I am looking for a 1913 0r 1914 body to build a Runabout Give me a call or send e-mail with pictures and price with contact number
Dennis 401-932-3191

Last post

to the top

9 Replies

756 Views

Last post by Burlingtontguy
Thu Jan 26, 2023 7:07 pm
FS Shriner Model t on CL

Last post by Model T Matt « Thu Jan 26, 2023 7:03 pm
Posted in Classifieds - Vehicles
Replies: 5
by RVA23T » Fri Jan 20, 2023 2:30 pm » in Classifieds - Vehicles

First post

No connection to this posting. Just thought there might be some interest here in Lizzy Land

CL shriner t.jpg

Last post

no they were cast looked correct

5 Replies

762 Views

Last post by Model T Matt
Thu Jan 26, 2023 7:03 pm
Anti-rattle ideas for brake rods

Last post by TRDxB2 « Thu Jan 26, 2023 6:46 pm
Posted in General Discussion Forum
Replies: 9
by bdtutton » Thu Jan 26, 2023 1:46 pm » in General Discussion Forum

First post

When I installed Rocky Mountain brakes on my 14 Touring car I noticed the brake rods were very close to the running board truss rods. When I push on the brakes the two rods get so close together that they often rattle together quite loudly. I really don't want to bend the rods so I have been thinking about splitting a rubber hose and covering one...

Last post

Would it be possible for you to take a photo from this angle. Interested in seeing what position the brake rod support is in. If you look at the picture it looks like the hook of the brake rod support it almost positioned near where your' having the rattle.
brk rod rattle.png
--
--
Also it look like there is scraping in several places...

9 Replies

137 Views

Last post by TRDxB2
Thu Jan 26, 2023 6:46 pm
WW1 Ambulances

Last post by A Whiteman « Thu Jan 26, 2023 6:44 pm
Posted in General Discussion Forum
Replies: 3
by A Whiteman » Thu Jan 26, 2023 3:18 pm » in General Discussion Forum

First post

The latest 'T' picture from the illustrated history of WW1 I have been wading through (more volumes still to read through yet).

Here we see a gathering of British T Ambulances, possibly newly delivered to the front?

Untitled.jpg

Last post

The chapter that this picture came from followed a wounded 'Tommy' from when he was hurt stage by stage through until he reached England. A very interesting description of the process. As such much of the detail was not given as to locations, just generic areas (i.e. 'the Somme').

Transport went from being carried by mates, stretchered,...

3 Replies

102 Views

Last post by A Whiteman
Thu Jan 26, 2023 6:44 pm
WTB exhaust cutout for exhaust whistle

Last post by Reno Speedster « Thu Jan 26, 2023 6:02 pm
Posted in Classifieds - Parts
Replies: 1
by Reno Speedster » Tue Jan 24, 2023 5:55 pm » in Classifieds - Parts

First post

I am looking for an exhaust cutout for an exhaust whistle on my 1922. I would prefer an original cast iron one in decent shape to go on a car.

Last post

To be clear, something like this. I have the whistle. I just need the cutout.

1 Replies

105 Views

Last post by Reno Speedster
Thu Jan 26, 2023 6:02 pm
Parts for sale

Last post by KimDobbins « Thu Jan 26, 2023 5:39 pm
Posted in Classifieds - Parts
Replies: 5
by KimDobbins » Wed Jan 25, 2023 4:57 pm » in Classifieds - Parts

First post

1911 Stewart #22 wheel gear $85.00. 1911 hubcap wrench, $200.00. 1912-13 front timer cover, $80.00. Aluminum timer with resurfaced contacts $40.00. NOS new day timer with used brush, $50.00. 4 brass headlight burner stands with elbows $80.00. KW 1913 coil box switch with original key, $85.00. All plus shipping. Kdmks AT att.net.

Last post

Hub cap wrench is sold.

5 Replies

646 Views

Last post by KimDobbins
Thu Jan 26, 2023 5:39 pm
13-14 body to firewall brackets

Last post by RajoRacer « Thu Jan 26, 2023 4:55 pm
Posted in General Discussion Forum
Replies: 6
by adenautomotive » Fri Jan 20, 2023 5:45 pm » in General Discussion Forum

First post

i need one upper and one lower body to firewall mtg plates ,anyone have anything?

Last post

I located an upper orphan - I sent you an email Mark.

6 Replies

296 Views

Last post by RajoRacer
Thu Jan 26, 2023 4:55 pm
1913 FLOOR BOARDS

Last post by DanTreace « Thu Jan 26, 2023 4:54 pm
Posted in General Discussion Forum
Replies: 6
by adenautomotive » Wed Jan 25, 2023 6:03 pm » in General Discussion Forum

First post

Is anyone still making floorboards ,i need a set for my 13 touring project

Last post

Barring that, floorboards are not hard to make. The top board is a little complex, mine is an original made by Fisher Body. It fits my Wilson bodied runabout well. I re-made the other two boards a few years back using ash as original. If nothing else turns up, I could take measurements for you.

Nice work Rich on that top board. The early ones...

6 Replies

222 Views

Last post by DanTreace
Thu Jan 26, 2023 4:54 pm
Jno Brown 540 Taillight FS

Last post by rickd « Thu Jan 26, 2023 4:45 pm
Posted in Classifieds - Parts

by rickd » Thu Jan 26, 2023 4:45 pm » in Classifieds - Parts

Jno Brown Model 540 Ford-O taillight. $60.00+$17.00 usps shipping. Check or money order. Email me through this site. b1.jpg b2.jpg b3.jpg b4.jpg

0 Replies

63 Views

Last post by rickd
Thu Jan 26, 2023 4:45 pm
Jno Brown 560 Taillight FS

Last post by rickd « Thu Jan 26, 2023 4:41 pm
Posted in Classifieds - Parts

by rickd » Thu Jan 26, 2023 4:41 pm » in Classifieds - Parts

Jno Brown Model 560 tailight. $50.00 + $17.00 usps shipping. Check or money order. Email me through this site. bb1.jpg bb2.jpg bb3.jpg bb4.jpg

0 Replies

50 Views

Last post by rickd
Thu Jan 26, 2023 4:41 pm
For Sale - Model T Frame - Late 1912 to early 1913

Last post by GatorsModelT « Thu Jan 26, 2023 4:39 pm
Posted in Classifieds - Parts
Replies: 1
by GatorsModelT » Wed Apr 13, 2022 11:59 pm » in Classifieds - Parts

First post

1911 - 1912 to early 1913 Model T Frame - Very good condition. Is sandblasted, primed and painted. Has rear fender brackets on it. The running board support rods are also there. More photos available.
Can deliver to Chickasha, Ok or Luray, VA swap meets in March and May.
$1200.00 or OBO.

Last post

Back to top

1 Replies

642 Views

Last post by GatorsModelT
Thu Jan 26, 2023 4:39 pm
Model T Tips Website

Last post by Vonau « Thu Jan 26, 2023 4:28 pm
Posted in General Discussion Forum
Replies: 4
by mcnallyf » Thu Jan 19, 2023 10:45 am » in General Discussion Forum

First post

Why does the model t tips website ask for a username and password?

Last post

Hi

I was amazed, two/three weeks ago the website worked for a day. I happened upon it.
It's an interesting site and very helpful. Unfortunately it doesn't work anymore.

All the information available on the internet is very helpful for me as I don't speak English so I can work with online translator. Unfortunately, written manuals on paper don't...

4 Replies

387 Views

Last post by Vonau
Thu Jan 26, 2023 4:28 pm
SOLD Original large funnel inside oil tube

Last post by FATMAN « Thu Jan 26, 2023 4:14 pm
Posted in Classifieds - Parts
Replies: 2
by FATMAN » Thu Jan 26, 2023 2:27 pm » in Classifieds - Parts

First post

SOLD
Original large funnel inside oil tube, looks to be in great condition. 35.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

Last post

Thank you scott, site will not take return e mail for some reason, it will go in mail tomorrow, Bob

2 Replies

112 Views

Last post by FATMAN
Thu Jan 26, 2023 4:14 pm
What's up with e mails

Last post by FATMAN « Thu Jan 26, 2023 4:13 pm
Posted in General Discussion Forum

by FATMAN » Thu Jan 26, 2023 4:13 pm » in General Discussion Forum

I am trying to respond to a few e mails on the forum and all are getting kicked back, never had this happen before, anyone else having issues, Bob

0 Replies

72 Views

Last post by FATMAN
Thu Jan 26, 2023 4:13 pm
New Member Restoring a 26 Coupe

Last post by jab35 « Thu Jan 26, 2023 4:06 pm
Posted in General Discussion Forum
Replies: 37
by Jmeredith » Fri Jan 06, 2023 12:53 pm » in General Discussion Forum

First post

Greetings to all,
I am trying to restore a 26 coupe that my father bought back in the early 70's. I was not here during the time he was doing the disassemble as I had just joined the service. To say the least it is an adventure trying to put all the pieces back together. He did quite a bit of work on it but it has been in storage for the past 25...

Last post

That looks like a pivot bolt for a pre-'26 fan arm. The '26-'27 used an entirely different Fan Assembly where the fan axle was mounted in an eccentric that could be rotated in a 'bearing' in the water outlet casting that bolted to the head. The fan belt tension was adjusted by rotating the eccentric bushing and then clamping it in place. Is your...

37 Replies

1250 Views

Last post by jab35
Thu Jan 26, 2023 4:06 pm
F-E Early oval top bow piece thinking 1915-6 ???

Last post by FATMAN « Thu Jan 26, 2023 3:54 pm
Posted in Classifieds - Parts

by FATMAN » Thu Jan 26, 2023 3:54 pm » in Classifieds - Parts

I was told this is for a 1915-16 but nothing to compare it nice and sloid will beed the river or pin at the bottom replaced measures about 31 1/4 long.
oval bow
35.00 plus postage,
Bob
815-633-7244
modelt2001@comcast.net

0 Replies

56 Views

Last post by FATMAN
Thu Jan 26, 2023 3:54 pm
FS Early Transmission

Last post by Dan Hatch « Thu Jan 26, 2023 3:26 pm
Posted in Classifieds - Parts
Replies: 4
by Dan Hatch » Sat Jan 21, 2023 3:31 pm » in Classifieds - Parts

First post

I got two early NON Starter Transmissions FS. You know what I know. They are all there. I put a tape on magnets look to be 3/4”. $100 EACH PICKUP HERE. Email me at address in pictures. Thanks Dan
73342502-B788-45BF-923C-5B1A4749A84E.jpeg
8256C0A9-F481-4E1C-894D-5FD674D008AC.jpeg
18F9D9A3-FF4F-4742-B9B4-E9E04F3EBD92.jpeg...

Last post

Back to the top

4 Replies

550 Views

Last post by Dan Hatch
Thu Jan 26, 2023 3:26 pm
Valve grinder FS

Last post by Dan Hatch « Thu Jan 26, 2023 3:26 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Sat Jan 21, 2023 3:36 pm » in Classifieds - Parts

First post

Here is a valve Lapper. See pictures. $15.00 + shipping. Email me at address in pictures. Thanks Dan
9DBF24C2-363E-4CD0-9D21-2A0BE77493CA.jpeg
F4068FB0-F284-433D-8BB8-38F9B69915F2.jpeg
A3E6861B-7EA4-4059-B64C-55DE59018CD7.jpeg

Last post

Back to the top

3 Replies

462 Views

Last post by Dan Hatch
Thu Jan 26, 2023 3:26 pm
Where's the fire ?

Last post by Rich Eagle « Thu Jan 26, 2023 3:22 pm
Posted in General Discussion Forum
Replies: 5
by Rich P. Bingham » Wed Jan 25, 2023 10:32 am » in General Discussion Forum

First post

1913 touring adapted for service. It looks funny without a windshield. They could have used a runabout, but hey, the back seat was gonna fall off anyway. :lol:

Last post

I haven't been around many Chalmers cars. I did see this 1913 in 1968 and was able to identify a chassis a friend had by the footman loop on the front fender. They seemed like mighty fine cars.
Rich
Chalmerzz.jpg

5 Replies

377 Views

Last post by Rich Eagle
Thu Jan 26, 2023 3:22 pm
Radioactive spark plugs

Last post by A Whiteman « Thu Jan 26, 2023 3:11 pm
Posted in General Discussion Forum
Replies: 7
by colonelpowers » Wed Jan 25, 2023 8:07 pm » in General Discussion Forum

First post

A couple years ago I bought a T that had a set of Firestone Polonium spark plugs in it. They seemed to work fine but I eventually replaced them and put them up in a cabinet. I came across them the other day and was curious to know if anyone knew much about them. Are they a better plug by being radioactive or was it just a gimmick?

Last post

Check out other spark plugs and spark intensifiers in our Gallery Section:

Plugs and things start at about page 25 of the section.

7 Replies

372 Views

Last post by A Whiteman
Thu Jan 26, 2023 3:11 pm
We got reinforcements !!

Last post by TWrenn « Thu Jan 26, 2023 3:07 pm
Posted in General Discussion Forum
Replies: 2
by Rich P. Bingham » Thu Jan 26, 2023 12:17 pm » in General Discussion Forum

First post

In more ways than one ! Looks like the rear seat in this 1913 touring is holding up well under stress !

Last post

Wow...one guy and seven gals! Not sure if we should envy him or pity him! :lol:
Thanks for the cool pic Rich!

2 Replies

210 Views

Last post by TWrenn
Thu Jan 26, 2023 3:07 pm
Video Links in Gallery Section

Last post by A Whiteman « Thu Jan 26, 2023 3:04 pm
Posted in General Discussion Forum

by A Whiteman » Thu Jan 26, 2023 3:04 pm » in General Discussion Forum

I have added a link to Darren's car in our Video Link section of the gallery:

Also added is a link to a simple tear down of a T engine and Transmission designed for the layman to explain how it works.

We don't have copies of the videos on our site, rather these are links to Youtube or other sites where you can actually watch the action.

The...

0 Replies

24 Views

Last post by A Whiteman
Thu Jan 26, 2023 3:04 pm
WTB Top rest body brackets

Last post by RajoRacer « Thu Jan 26, 2023 3:04 pm
Posted in Classifieds - Parts
Replies: 8
by rendo » Tue Jan 10, 2023 4:17 pm » in Classifieds - Parts

First post

Hi, I am looking for these body irons, not the rests, just the part that attaches to the body under the upholstery.
Thank you.
John
akrendo@gmail.com

Last post

What length you need ?

8 Replies

324 Views

Last post by RajoRacer
Thu Jan 26, 2023 3:04 pm
The Rarest Model T Ever! ??? On you tube

Last post by A Whiteman « Thu Jan 26, 2023 3:00 pm
Posted in General Discussion Forum
Replies: 15
by FATMAN » Wed Jan 25, 2023 11:16 am » in General Discussion Forum

First post

cool video, how much is correct.?

Last post

Added a link to the video on our Video Page:

15 Replies

768 Views

Last post by A Whiteman
Thu Jan 26, 2023 3:00 pm
F-S Early transmission drive plate assembly

Last post by FATMAN « Thu Jan 26, 2023 2:33 pm
Posted in Classifieds - Parts
Replies: 1
by FATMAN » Thu Jan 26, 2023 2:33 pm » in Classifieds - Parts

First post

Early transmission drive plate assembly, has Ford in block letters, shaft is good will need plug
30.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

Last post

more photos

1 Replies

50 Views

Last post by FATMAN
Thu Jan 26, 2023 2:33 pm
SOLD pending payment Window-garnish moldings

Last post by FATMAN « Thu Jan 26, 2023 2:30 pm
Posted in Classifieds - Parts
Replies: 1
by FATMAN » Thu Jan 26, 2023 2:29 pm » in Classifieds - Parts

First post

nice pair of garnish moldings might be for 1926-7 nothing to compare it with see photos
50.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

Last post

more photos

1 Replies

55 Views

Last post by FATMAN
Thu Jan 26, 2023 2:30 pm
Gas line tee

Last post by Scott Rosenthal « Thu Jan 26, 2023 2:14 pm
Posted in General Discussion Forum
Replies: 20
by Scott Rosenthal » Tue Jan 17, 2023 5:48 pm » in General Discussion Forum

First post

Looked everywhere for acetylene line brass tee, then saw where Keith T. posted a photo of the one he made. Here's mine...Thx Keith.

Last post

Hear what pu're saying Larry, but what about the photos? I could understand post point of sale early photos, where I don't know whether the car came with lights, or possibility that lights were installed by a dealer, but assembly line photos are tougher to dismiss?

In this part of the US, we had gas home lighting up into the 20's. Common were...

20 Replies

842 Views

Last post by Scott Rosenthal
Thu Jan 26, 2023 2:14 pm
F-S 1926-7 Brake pedal

Last post by FATMAN « Thu Jan 26, 2023 2:12 pm
Posted in Classifieds - Parts

by FATMAN » Thu Jan 26, 2023 2:12 pm » in Classifieds - Parts

Nice brake pedal for 1926-7 the shaft looks good outer threads look good inner threads will need chasing or just replace the shaft 35.00 plus postage, Bob
815-633-7244
modelt2001@comcast.net

0 Replies

48 Views

Last post by FATMAN
Thu Jan 26, 2023 2:12 pm
Hand pump and gauge F/S

Last post by Layden Butler « Thu Jan 26, 2023 2:08 pm
Posted in Classifieds - Parts
Replies: 2
by Layden Butler » Wed Nov 30, 2022 8:08 pm » in Classifieds - Parts

First post

Brass hand pump made by Lunkenheimer and new pressure gauge $95 for the pair. Domestic shipping $10.

Last post

Back to the top!

2 Replies

413 Views

Last post by Layden Butler
Thu Jan 26, 2023 2:08 pm
FS 1917 Price List Parts and Accessories Model T

Last post by RajoRacer « Thu Jan 26, 2023 1:50 pm
Posted in Classifieds - Parts
Replies: 2
by jschroeder7641 » Thu Jan 26, 2023 11:01 am » in Classifieds - Parts

First post

For sale is an original copy of the October 15, 1917 Price List Parts and Accessories for the Model T. Rough shape and shows its age, but would be a great addition to a Model T display at a car show or framed in the man cave. $50.00 domestic postage paid, actual cost for overseas mailing.

John Schroeder
Delafield, Wisconsin

Last post

Perry - need to contact you regarding the Runabout wood plans - my apologies for jumping onboard here !

2 Replies

88 Views

Last post by RajoRacer
Thu Jan 26, 2023 1:50 pm
Wanted: Wood Plans - '23 - '25 Runabout

Last post by RajoRacer « Thu Jan 26, 2023 1:32 pm
Posted in Classifieds - Parts
Replies: 7
by RajoRacer » Tue Jan 17, 2023 7:10 pm » in Classifieds - Parts

First post

Helping a fella locate wood plans for a later Runabout - I had a collection of Miller plans but alas, I must have sold it or borrowed it out and it never came back !

Last post

BTT - Perry - been attempting contact regarding the wood plans - drop me a note, please.

7 Replies

290 Views

Last post by RajoRacer
Thu Jan 26, 2023 1:32 pm
Windows

Last post by CudaMan « Thu Jan 26, 2023 1:31 pm
Posted in General Discussion Forum
Replies: 8
by Barteldes » Thu Jan 19, 2023 12:38 pm » in General Discussion Forum

First post

I have a cracked Drivers side window and need to replace both windshields. I have a 1924 Coup. How or where.. do i go to get this glass?

Last post

Here are the glass dimensions in case the glass shop can't or won't use your old glass for patterns. :)

8 Replies

289 Views

Last post by CudaMan
Thu Jan 26, 2023 1:31 pm
Wanted-: 32 top bows and irons

Last post by CTLeonard « Thu Jan 26, 2023 1:25 pm
Posted in Classifieds - Parts

by CTLeonard » Thu Jan 26, 2023 1:25 pm » in Classifieds - Parts

Trying to cover all basis. Have 32 roadster looking for top bows and irons. Any help appreciated!

0 Replies

34 Views

Last post by CTLeonard
Thu Jan 26, 2023 1:25 pm
WTB felloes

Last post by FATMAN « Thu Jan 26, 2023 1:03 pm
Posted in Classifieds - Parts
Replies: 1
by MCobb » Thu Jan 26, 2023 12:08 pm » in Classifieds - Parts

First post

Wanted - one or two good felloes for 30x3-1/2 wheels

Last post

I have quite a few here in Loves Park, Il Bob
815-633-7244

1 Replies

65 Views

Last post by FATMAN
Thu Jan 26, 2023 1:03 pm
Model T camper/tent

Last post by Rich Eagle « Thu Jan 26, 2023 12:45 pm
Posted in General Discussion Forum
Replies: 2
by John kuehn » Thu Jan 26, 2023 8:41 am » in General Discussion Forum

First post

Here’s a high end Model T roadside camper set up

Last post

Perhaps it is similar to this.
popout.jpg

2 Replies

224 Views

Last post by Rich Eagle
Thu Jan 26, 2023 12:45 pm
1924 Coupe Interior Photos

Last post by Norman Kling « Thu Jan 26, 2023 12:22 pm
Posted in General Discussion Forum
Replies: 10
by Model T Ron » Sun Jan 22, 2023 11:11 pm » in General Discussion Forum

First post

I am certain the package shelf can be removed to give more leg room. From the photos I have seen this would involve moving the gas tank back along with the seat riser and then reconstructing the seat back support. I know its not a project for everyone but at 6'3'' its worth the effort to get an additional 4 inches or so.

Any photos of the seats...

Last post

If the area where you will be driving is relatively flat, moving the tank back should not be a problem. If however there are steep hills you might consider some type of pressurization or fuel pump. Also keep the tank near full if driving on hills.
Other thing to do is make a trial seat position before you make anything permanent, because leg room...

10 Replies

395 Views

Last post by Norman Kling
Thu Jan 26, 2023 12:22 pm
FJ - Some Humor To Brighten Your Day

Last post by Norman Kling « Thu Jan 26, 2023 12:05 pm
Posted in OT - Off topic
Replies: 1580
by FreighTer Jim » Tue Feb 26, 2019 4:44 am » in OT - Off topic
1

…

12

13

14

15

16
First post

Winter is taking its Toll .... :!:

Time for a Laugh ..... :D

FJ

Last post

That fireplace is for single use only! Use outdoors in a cleared area with low winds and much water available.! :lol:
Norm
1580 Replies

326096 Views

Last post by Norman Kling
Thu Jan 26, 2023 12:05 pm
WTB felloes

Last post by MCobb « Thu Jan 26, 2023 12:04 pm
Posted in Classifieds - Parts

by MCobb » Thu Jan 26, 2023 12:04 pm » in Classifieds - Parts

Wanted - one or two good felloes for 30x3-1/2 wheels

0 Replies

35 Views

Last post by MCobb
Thu Jan 26, 2023 12:04 pm
TT wheel puller

Last post by Model T Matt « Thu Jan 26, 2023 11:56 am
Posted in Classifieds - Parts

by Model T Matt » Thu Jan 26, 2023 11:56 am » in Classifieds - Parts

Model TT Wheel puller matched up to hub cap that I have asking $80.00 shipped to your location call Matt at 503-824-2681

0 Replies

35 Views

Last post by Model T Matt
Thu Jan 26, 2023 11:56 am
gas cap 24/27

Last post by JSpencer « Thu Jan 26, 2023 11:11 am
Posted in Classifieds - Parts
Replies: 1
by Melba Nolan » Wed Jan 25, 2023 1:58 pm » in Classifieds - Parts

First post

For sale: gas cap in like new condition. Has Ford script on top. $30 plus postage
20230117_104308.jpg 20230117_104254.jpg

Last post

I am interested in purchasing the gas cap. I have a 1926 roadster, if it fits ok.
Joe Spencer 517-238-9122

1 Replies

203 Views

Last post by JSpencer
Thu Jan 26, 2023 11:11 am
Just acquired a "1913" Speedster - questions? Make it Happy!

Last post by Petrah Phyre « Thu Jan 26, 2023 11:02 am
Posted in Forum Support Questions
Replies: 1
by Catbird » Thu Jan 26, 2023 8:06 am » in Forum Support Questions

First post

I just received a 1913 Speedster. Seems to be an incredible build, everything looks new, but zero documentation - I will be asking a lot of questions. I am mostly an old car guy, Packard, Pierce, Thomas, Napier, Cadillac. I recognize that Model T, I have several. It is a very tough car, but unique in many aspects. I have studied the history and...

Last post

Bill, you will get a better response on if you post this in the general forum. I know the 'what oil' alone will create quite the input. I , personally, run 15w40 in everything I own.

1 Replies

21 Views

Last post by Petrah Phyre
Thu Jan 26, 2023 11:02 am
KINGSTON L-4 FOR SALE

Last post by David Babcock « Thu Jan 26, 2023 10:20 am
Posted in Classifieds - Parts

by David Babcock » Thu Jan 26, 2023 10:20 am » in Classifieds - Parts

NEEDS A CORK FLOAT AND THE THROTTLE BUTTERFLY DISC. $100 POSTPAID.

0 Replies

49 Views

Last post by David Babcock
Thu Jan 26, 2023 10:20 am
FS: T and TT items

Last post by jaybee47 « Thu Jan 26, 2023 10:10 am
Posted in Classifieds - Parts
Replies: 8
by jaybee47 » Tue Jan 24, 2023 1:36 pm » in Classifieds - Parts

First post

Running boards, pair, T '13 to '25, grit blast, solid, has small area surface rust, $100

Running boards, pair, TT later year, solid, $150

Running boards, pair, TT was told for early years, solid, painted red for a previous project but abandoned, $150

TT stake sides, six panels, complete with all brackets and hardware, varnished pine wood, $525...

Last post

Someone inquired if I would sell the hardware and brackets only and what is the best low price for the complete outfit. Yes, I would sell the hardware and brackets only for $225 plus shipping or pickup. $275 complete with the wood plus shipping or pickup. Zip 46725 Columbia City IN

8 Replies

416 Views

Last post by jaybee47
Thu Jan 26, 2023 10:10 am
1913 Speedster who built it?

Last post by TXGOAT2 « Thu Jan 26, 2023 10:08 am
Posted in General Discussion Forum
Replies: 31
by Catbird » Thu Jan 12, 2023 10:36 pm » in General Discussion Forum

First post

Excited about purchased a 1913 Speedster with some exciting upgrades! It is in transport to me. But the online dealer has no knowledge of parts worked into it except
5 McClaren wheels (new)
KC Warford (new)
Brass Livingston Vee Radiator
Large brakes
Alternator
E&J headlights (converted LED)
Electric Starter
Spotlight
12v System
Fatman steering...

Last post

I had a naked 1947 Buick. Everything the car needed to run, except for a gas tank and seat and a small bracket for the gas pedal, was already attached to the chassis. I rigged up a gas tank from an Oliver Row Crop tractor and an old bucket seat. It ran very well with its Fireball Eight and 3 on the tree. No floorboard or any other sheet metal, and...

31 Replies

1351 Views

Last post by TXGOAT2
Thu Jan 26, 2023 10:08 am
WTB: Door handles 1911-1912

Last post by rendo « Thu Jan 26, 2023 8:21 am
Posted in Classifieds - Parts

by rendo » Thu Jan 26, 2023 8:21 am » in Classifieds - Parts

Looking for door handles for 1911 or 1912.
Thanks
akrendo@gmail.com

0 Replies

50 Views

Last post by rendo
Thu Jan 26, 2023 8:21 am
FOR SALE - E&J BRASS LAMP SET

Last post by Bigal « Wed Jan 25, 2023 11:19 pm
Posted in Classifieds - Parts
Replies: 2
by Bigal » Sat Jan 21, 2023 1:57 pm » in Classifieds - Parts

First post

I am selling these for the family of one our deceased Model T members. Since I am not very knowledgeable on E&J Lamps, I can send detailed pictures for your inspection and approval. The headlamps are reproduction without the burner hardware, sidelamps are reproductions with original burners, and the tail lamp looks to be a very nice original with...

Last post

SOLD Pending Payment. Thank you.

2 Replies

566 Views

Last post by Bigal
Wed Jan 25, 2023 11:19 pm
WTB brass step plate

Last post by Perry Goble « Wed Jan 25, 2023 10:48 pm
Posted in Classifieds - Parts
Replies: 1
by Perry Goble » Tue Jan 24, 2023 4:04 pm » in Classifieds - Parts

First post

I would like to buy one brass step plate . wpgoble@hotmail.com perry goble 802 S Main St Burnet Tx 78611

Last post

No longer needed . Thanks

1 Replies

106 Views

Last post by Perry Goble
Wed Jan 25, 2023 10:48 pm
Looking for a car transport.

Last post by FreighTer Jim « Wed Jan 25, 2023 10:04 pm
Posted in General Discussion Forum
Replies: 15
by Derrick16 » Fri Oct 02, 2020 4:59 pm » in General Discussion Forum

First post

Hi all, could anyone recommend a reputable and affordable car transporter? I already know about freighter Jim, but I’m looking for other options. Looking to ship a T from Kentucky to California. If anyone will happen to be passing by Kentucky to ca let me know and we can work something out. Thanks in advance!

Last post

Someone's not paying attention.... :lol: You're responding to a request for a transporter started over two years ago!! :lol:
I bet he's already got his car in the garage!

Tim 👋

Check the user profile:

87501FDF-2905-4A4F-AF7E-CD69D5BC3EDA.jpeg

They just joined today.
Second time on this thread this has happened.

FJ

15 Replies

3386 Views

Last post by FreighTer Jim
Wed Jan 25, 2023 10:04 pm
quantity of material for 1927 touring interior

Last post by DanTreace « Wed Jan 25, 2023 10:01 pm
Posted in General Discussion Forum
Replies: 1
by rendo » Wed Jan 25, 2023 8:18 pm » in General Discussion Forum

First post

About how many square feet of upholstery material is needed to do a 1927 touring interior not including a top?
Thank you.
John

Last post

Likely not much help, but according to The Ford Industries a company booklet, pub. 1926.

Page 10 'Artificial Leather'.... About 15 yards are required for the top, curtains, and upholstery on the touring car.

1 Replies

95 Views

Last post by DanTreace
Wed Jan 25, 2023 10:01 pm
New London to New Brighton registration is open

Last post by DHort « Wed Jan 25, 2023 9:59 pm
Posted in General Discussion Forum

by DHort » Wed Jan 25, 2023 9:59 pm » in General Discussion Forum

Go to www.antiquecarrun.org and you can print your registration form.

0 Replies

89 Views

Last post by DHort
Wed Jan 25, 2023 9:59 pm
Hempey cooper boring bar

Last post by Dan Hatch « Wed Jan 25, 2023 9:35 pm
Posted in General Discussion Forum
Replies: 6
by Randall strickland » Wed Jan 25, 2023 1:50 pm » in General Discussion Forum

First post

I picked this up a couple years ago and am just getting around to mess around with it now, someone has taken false cams off it and the boring bar has to be removed to install them back on, has anyone ever taken boring bar out?thanks 50C753A3-C37A-4BC8-BBE8-66D5B365E032.jpeg

Last post

That will be good. That way next guy will know how to do it.
I used one for a long time. I put a sprocket on mine and modified an old Linde wire feeder to power it. That cranking gets old fast. I put a reversing switch on the drive so I could run it in or out. Worked like a champ. Good luck with it. Dan

6 Replies

280 Views

Last post by Dan Hatch
Wed Jan 25, 2023 9:35 pm
Bethlehem 360 Spark Plugs

Last post by Scott_Conger « Wed Jan 25, 2023 9:32 pm
Posted in General Discussion Forum
Replies: 17
by Tadpole » Wed Jun 22, 2022 2:57 pm » in General Discussion Forum

First post

Does anyone have experience running these 360 one-point style plugs? Will they work in a T?

Last post

Art

old spark plugs and O2 sensors on modern cars.

17 Replies

1036 Views

Last post by Scott_Conger
Wed Jan 25, 2023 9:32 pm
Camshaft Wear

Last post by Scott_Conger « Wed Jan 25, 2023 9:15 pm
Posted in General Discussion Forum
Replies: 6
by johnr » Thu Jan 12, 2023 2:33 pm » in General Discussion Forum

First post

looking for information on stock camshaft.
I need to know what is standard lift and what would be minimum dimension.

Thank you for your help.

Last post

Nice testimonial Craig

I am pleased to hear that kind of report on Chaffin's regrinds

6 Replies

452 Views

Last post by Scott_Conger
Wed Jan 25, 2023 9:15 pm
quantity of material for 1927 touring interior

Last post by rendo « Wed Jan 25, 2023 8:17 pm
Posted in General Discussion Forum

by rendo » Wed Jan 25, 2023 8:17 pm » in General Discussion Forum

About how many square feet of upholstery material is needed to do a 1927 touring interior not including a top?
Thank you.
John

0 Replies

34 Views

Last post by rendo
Wed Jan 25, 2023 8:17 pm
Champion Spark Plug Tester

Last post by ThreePedalTapDancer « Wed Jan 25, 2023 8:04 pm
Posted in Classifieds - Parts
Replies: 1
by tselliott » Tue Jan 24, 2023 10:47 pm » in Classifieds - Parts

First post

Here is a neat old piece. This is a Champion Spark Plug Tester from 1936. It uses a model T coil inside. It is missing the gauge that would show how much pressure was in the chamber. The pressure was used to simulate the combustion chamber pressure so you could see how the spark plug performed under pressure. There were adapters so you could check...

Last post

That’s a neat one. They look like this fully restored.

ED715691-4305-4700-8639-A35063AD69FF.jpeg

1 Replies

353 Views

Last post by ThreePedalTapDancer
Wed Jan 25, 2023 8:04 pm
Ez slider

Last post by Don ellis « Wed Jan 25, 2023 7:30 pm
Posted in General Discussion Forum
Replies: 2
by Don ellis » Wed Jan 25, 2023 7:04 pm » in General Discussion Forum

First post

Anyone have the measurements of this by chance? I have an older set of Rocky Mountain brakes I would like to update.

Last post

If it was twenty it would be a no brainer, but its over sixty and I can make one pretty easily.

2 Replies

224 Views

Last post by Don ellis
Wed Jan 25, 2023 7:30 pm
Misc.Parts/pieces

Last post by Model T Matt « Wed Jan 25, 2023 6:38 pm
Posted in Classifieds - Parts
Replies: 1
by Model T Matt » Wed Jan 25, 2023 9:59 am » in Classifieds - Parts

First post

26-27 front motor mount- Two 26-27 replacement crank handles with pins-dash light-foot lever for exhaust cut out-two ignition switches for parts one has nice amp. meter-3 Amco Emergency Motor Mounts- Band Installer asking $125.00 plus $17.50 shipping for all of it call Matt 503-824-2681

Last post

headed to Steve

1 Replies

423 Views

Last post by Model T Matt
Wed Jan 25, 2023 6:38 pm
Just adopted a T - It was supposed to be a quiet project

Last post by Arbs « Wed Jan 25, 2023 6:08 pm
Posted in General Discussion Forum
Replies: 162
by Arbs » Sat Oct 22, 2022 2:23 pm » in General Discussion Forum
1

2
First post

Greetings MTFCA forum. I just adopted a T and it arrived today. What was supposed to be a quiet project dropped off in my driveway, turned into a neighborhood event.

I was looking for a project that would be pretty much together but needed some work. The goal is to introduce my son (8 yrs old) to the fun of working on a car together and...

Last post

Radiator update, bearings and more bushings

The radiator shop cleaned the radiator, performed a leak test, and gave it the once over. The only issue was that the overflow tube needed to be secured in one spot.

I started to tackle my front bearing replacement. The driver's side came apart easy , races and all. Turns out it was too easy. My new...
162 Replies

6375 Views

Last post by Arbs
Wed Jan 25, 2023 6:08 pm
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by Rich P. Bingham « Wed Jan 25, 2023 6:06 pm
Posted in OT - Off topic
Replies: 3842
by Rich Eagle » Thu Jan 10, 2019 2:20 pm » in OT - Off topic
1

…

35

36

37

38

39
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

Definitely not Conrad Biffle. It's also worth mentioning that several of the Whiskers Club members who affected top hats were periodically mistaken for Kalamity Dick. Although he was not a dues-paying member, the club trustees inducted him as Whisker Emeritus at Large with full member privileges for inventing the self-propelled automatic mustache...
3842 Replies

679443 Views

Last post by Rich P. Bingham
Wed Jan 25, 2023 6:06 pm
FS 1908 early 1909 E & J tail light.

Last post by KimDobbins « Wed Jan 25, 2023 5:14 pm
Posted in Classifieds - Parts
Replies: 1
by KimDobbins » Wed Jan 25, 2023 5:13 pm » in Classifieds - Parts

First post

Suitable for 1908 NRS or early 1909 T. This lamp has the small blue jewel instead of the large lens on the later tail lights. Also the patent pending top. These lamps were used for only a very short time. Very nice condition, $500.00 plus shipping. Kdmks AT att.net.

Last post

Picture of inside.

1 Replies

213 Views

Last post by KimDobbins
Wed Jan 25, 2023 5:14 pm
FS- Set of Four Great Model T Books-$60.00 new New Price

Last post by Dan McEachern « Wed Jan 25, 2023 4:39 pm
Posted in Classifieds - Parts
Replies: 1
by Dan McEachern » Sun Jan 22, 2023 2:15 pm » in Classifieds - Parts

First post

Here is a nice set of four Model T books- great reading! Jackets have a few small tears in the corners as shown.
Plus Flat Rate shipping. Please send an e-mail to dmcgears@yahoo.com. Can deliver to Turlock Swap meet next weekend.
Check, money order or PP.

Last post

bump to top

1 Replies

274 Views

Last post by Dan McEachern
Wed Jan 25, 2023 4:39 pm
Crate Engine

Last post by J1MGOLDEN « Wed Jan 25, 2023 4:37 pm
Posted in General Discussion Forum
Replies: 20
by LOCParts » Sat Jan 14, 2023 1:05 pm » in General Discussion Forum

First post

When Ford shipped new Model T engine blocks to dealers they were sent in wood crates:

049B4939-5327-4828-89E9-CFEB8A024501.jpeg

B242671F-B69B-4277-9374-7A55246D755B.jpeg

95AB67D8-E39A-42D1-8682-769090C9795D.jpeg

19C5E634-FE71-4DA1-A7A8-FA3035094B84.jpeg

Most parts had their machined surfaces coated with a thin layer of “rust proof”...

Last post

I have a crankshaft in a smaller wooden box.

It has a blue-green wax on it.

20 Replies

1366 Views

Last post by J1MGOLDEN
Wed Jan 25, 2023 4:37 pm
Top saddles

Last post by Model T Matt « Wed Jan 25, 2023 4:32 pm
Posted in Classifieds - Parts
Replies: 1
by Model T Matt » Tue Jan 24, 2023 5:22 pm » in Classifieds - Parts

First post

5/8 inch saddles new asking $30.00 give Matt a call 503-824-2681

Last post

Includes shipping

1 Replies

142 Views

Last post by Model T Matt
Wed Jan 25, 2023 4:32 pm
Double Check Spark Plugs

Last post by Model T Matt « Wed Jan 25, 2023 4:30 pm
Posted in Classifieds - Parts
Replies: 2
by Model T Matt » Wed Jan 25, 2023 11:02 am » in Classifieds - Parts

First post

have a set of 4- Double Check Spark Plugs asking $40.00 plus $10.00 shipping call Matt 503-824-2681

Last post

yes compared to Champion X same thread

2 Replies

291 Views

Last post by Model T Matt
Wed Jan 25, 2023 4:30 pm
Are we there yet ?

Last post by Rich Eagle « Wed Jan 25, 2023 4:12 pm
Posted in General Discussion Forum
Replies: 3
by Rich P. Bingham » Wed Jan 25, 2023 2:17 pm » in General Discussion Forum

First post

Photo caption, Montana, 1936. I hope they made it !

Last post

Here is one more from that series. It's fun to poke into these photos. I had not known much about Arthur Rothstein (1915-1985) but have enjoyed his photos over the years. He was the first photographer hired by the Farm Security Administration, the New Deal agency and pioneered the use of photographs and “photo stories” to build public and...

3 Replies

252 Views

Last post by Rich Eagle
Wed Jan 25, 2023 4:12 pm
slow speed

Last post by Melba Nolan « Wed Jan 25, 2023 3:55 pm
Posted in Classifieds - Parts
Replies: 5
by Melba Nolan » Tue Sep 20, 2022 2:14 pm » in Classifieds - Parts

First post

For sale: slow speed connection 20/27 $10 plus postage
20220920_120529.jpg 20220920_120450.jpg

Last post

yes I do still have it

5 Replies

1102 Views

Last post by Melba Nolan
Wed Jan 25, 2023 3:55 pm
Dealer question

Last post by su8pack1 « Wed Jan 25, 2023 2:58 pm
Posted in General Discussion Forum
Replies: 5
by M.Sinclair » Tue Jan 24, 2023 8:51 pm » in General Discussion Forum

First post

Hello,
I have a 1921 coupe that came with a rear tire cover that said: Another Ford sold by F.P. Behlow
Watersmeet, Mich. Has anyone ever heard of an F.P. Behlow or have any knowledge of a ford dealership in watersmeel. It is pretty far up north, Ive been there once just to get a sign picture but there was no sort of historical society to ask.

Last post

This dealer tag is on my radiator.

1925 Model T 59.jpg

5 Replies

424 Views

Last post by su8pack1
Wed Jan 25, 2023 2:58 pm
brass spider

Last post by Melba Nolan « Wed Jan 25, 2023 1:47 pm
Posted in Classifieds - Parts

by Melba Nolan » Wed Jan 25, 2023 1:47 pm » in Classifieds - Parts

For sale: Brass spider. Good condition. has a few scratches. Should clean up good. $200 plus postage
20230125_123403.jpg 20230125_123346.jpg

0 Replies

164 Views

Last post by Melba Nolan
Wed Jan 25, 2023 1:47 pm
FS Running Board Tool Box

Last post by TRDxB2 « Wed Jan 25, 2023 1:41 pm
Posted in Classifieds - Parts

by TRDxB2 » Wed Jan 25, 2023 1:41 pm » in Classifieds - Parts

Nice running board tool box 22 long 9-1/4 wide and 6-3/4 high no key $85 plus shipping (or pickup)
Prefer PayPal to Friends/Family to my email address, checks or cash accepted

0 Replies

185 Views

Last post by TRDxB2
Wed Jan 25, 2023 1:41 pm
Wanted 1924 Radiator Apron

Last post by CudaMan « Wed Jan 25, 2023 1:03 pm
Posted in Classifieds - Parts
Replies: 4
by Model T Ron » Mon Jan 23, 2023 8:22 am » in Classifieds - Parts

First post

If you have a 1924 Radiator Apron that needs a new home please send me an e-mail.

Thanks
Ron

Last post

I have this one that I picked up somewhere a year or so ago. I think it is a reproduction because it hasn't been drilled for the choke pull rod. It has some light surface rust. I'd be willing to sell it for $75.00 including shipping, pm or email me through the forum if interested.

4 Replies

208 Views

Last post by CudaMan
Wed Jan 25, 2023 1:03 pm
Top saddles

Last post by Model T Matt « Wed Jan 25, 2023 12:53 pm
Posted in Classifieds - Parts
Replies: 1
by Model T Matt » Wed Jan 25, 2023 9:50 am » in Classifieds - Parts

First post

for sale two sets of top saddle and arms these are 5/8 '' asking $60.00 plus $12.50 shipping call Matt 503-824-2681

Last post

Have been Sold Thanks

1 Replies

110 Views

Last post by Model T Matt
Wed Jan 25, 2023 12:53 pm
WTB: early auto camp items

Last post by Linus Tremaine « Wed Jan 25, 2023 12:27 pm
Posted in Classifieds - Parts
Replies: 47
by Linus Tremaine » Wed Feb 27, 2019 12:52 pm » in Classifieds - Parts

First post

Hi all,
Im still hunting for early auto camp items. I collect civilian auto camp specific things such as coolers, kitchens, folding canvas items, shovels etc.

thanks for looking

Last post

dobro,
I sent you a PM

thanks

47 Replies

11336 Views

Last post by Linus Tremaine
Wed Jan 25, 2023 12:27 pm
Top Bow Wood

Last post by Jerry VanOoteghem « Wed Jan 25, 2023 12:10 pm
Posted in General Discussion Forum
Replies: 9
by GG Gregory » Tue Jan 24, 2023 9:52 pm » in General Discussion Forum

First post

I just bought a new set of 26-27 top irons..VERY lucky to get them..and half the cost of when they were being made. I know Ash seems to be the best choice for the Bows but what would be the next choice??? Yes, I know I can get them from the Vendors but I can’t see $79 + shipping for 3 pieces of wood when I can do it myself…if I can find the right...

Last post

I just remembered. I have some very clear straight red oak, about the same size as the Bows, would that work ? Oak is tuff but will hold up under the stress ???

I would not use red oak.

White oak, hickory, ash...

9 Replies

247 Views

Last post by Jerry VanOoteghem
Wed Jan 25, 2023 12:10 pm
If you need a radiator do not panic

Last post by jab35 « Wed Jan 25, 2023 11:44 am
Posted in General Discussion Forum
Replies: 52
by FATMAN » Sat Jan 21, 2023 9:17 am » in General Discussion Forum

First post

Lee just sent me a note there was an error
I just got the new prices on the black round tube radiators, if you can still get one at the old price, act now
new price
1917-23 1019.00
1924-27 1019.00
round tube only
Bob

Last post

Thanks to Brassworks for posting. I received the Brassworks radiator I ordered from Lang's for my '26 last October, and I'm happy to own it. Excellent workmanship (and packaging). jb

52 Replies

2260 Views

Last post by jab35
Wed Jan 25, 2023 11:44 am
2023 MTFCI Annual Tour

Last post by Bob Solak « Wed Jan 25, 2023 11:43 am
Posted in General Discussion Forum

by Bob Solak » Wed Jan 25, 2023 11:43 am » in General Discussion Forum

The 66h Annual Tour of the MTFCI will be in Baraboo, WI this year, July 16-21.

You can find information at our tour website:

We hope to see you there!

Bob Solak
2023 MTFCI Annual Tour Chairman

0 Replies

122 Views

Last post by Bob Solak
Wed Jan 25, 2023 11:43 am
Holley NH Straight Bore FS

Last post by Dan Hatch « Wed Jan 25, 2023 11:36 am
Posted in Classifieds - Parts

by Dan Hatch » Wed Jan 25, 2023 11:36 am » in Classifieds - Parts

Here is a NH Straight Through I got in a bucket of carbs in Estate Sale. Looks complete, but someone brazed the gas inlet elbow in it. I blasted it to clean it up. Look at pictures and decide for yourself. $65.00 + shipping. Email at address in the pictures. Thanks Dan
98552630-C7D7-4201-857E-84F6066EC3DD.jpeg...

0 Replies

207 Views

Last post by Dan Hatch
Wed Jan 25, 2023 11:36 am
1915 Touring $14,500.00 OBO

Last post by NorthSouth « Wed Jan 25, 2023 10:44 am
Posted in Classifieds - Vehicles
Replies: 5
by NorthSouth » Mon Nov 21, 2022 12:54 am » in Classifieds - Vehicles

First post

-
1915 Ford Touring
Larry Blair/ Tin Shed built engine w/ Scat crank and aluminum high compression head
Ruckstell two-speed axle, rebuilt by Norm Kling w/ new axles.
Rocky Mountain Brakes, relined by Andy’s Garage
New flat tube brass radiator
Solid wheels
New Classtique top
Speedometer
Year of Manufacture license plates.
Magnet mounted brake &...

Last post

1915 Touring Car $14,500.00

5 Replies

3456 Views

Last post by NorthSouth
Wed Jan 25, 2023 10:44 am
radiator caps

Last post by Model T Matt « Wed Jan 25, 2023 10:02 am
Posted in Classifieds - Parts

by Model T Matt » Wed Jan 25, 2023 10:02 am » in Classifieds - Parts

4 caps two steel two brass $30.00 shipped to you call Matt 503-824-2681

0 Replies

181 Views

Last post by Model T Matt
Wed Jan 25, 2023 10:02 am
Holley G Pats Pending carburetor

Last post by Corey Walker « Wed Jan 25, 2023 9:58 am
Posted in Classifieds - Parts
Replies: 2
by Corey Walker » Wed Jan 18, 2023 10:14 pm » in Classifieds - Parts

First post

Completely disassembled and cleaned, new float, needle and seat, venturi, choke spring, spray needle and bushing for nice original throttle shaft. No cracks or splits in original brass bowl, nice original hardware and new old stock screws for the Pats Pending mixing chamber cover. Test run. $325 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

2 Replies

286 Views

Last post by Corey Walker
Wed Jan 25, 2023 9:58 am
FS I'm selling my brass speedster project

Last post by Model T Tom « Wed Jan 25, 2023 9:39 am
Posted in Classifieds - Parts
Replies: 14
by Model T Tom » Thu Jan 19, 2023 11:50 am » in Classifieds - Parts

First post

I can finish it health problems.1923 chassis with title new brass radiator hood 1912 torpedo tank hood and body . Comes with brass tac perfect gas pressure gauge and cool amp meter and perfect lunckerhimer pressure pump for the seat.. I have 99 percentage of parts to rebuild the chassis . Engine runs good . I'll throw in a full a crank pressure...

Last post

Back to the top .

14 Replies

1326 Views

Last post by Model T Tom
Wed Jan 25, 2023 9:39 am
Old ford advertisement

Last post by KLTagert « Wed Jan 25, 2023 9:38 am
Posted in General Discussion Forum
Replies: 5
by anthony.theriault » Tue Jan 24, 2023 6:56 am » in General Discussion Forum

First post

Here's some of the Ford advertisement i own.
The first one is a ford punch tin with smaltz (the dark blue is a mix of crushed glass with sand and dye) from my research it's a 1917 to 1920 sign

on the second picture the ford model T on the right is a 1909 and behind it it's a canevas advertisement from the 20's. If you look on the left behind the...

Last post

Wonderful display - thanks for sharing!

5 Replies

484 Views

Last post by KLTagert
Wed Jan 25, 2023 9:38 am
F-S 1915-16 HOOD FORMER

Last post by FATMAN « Wed Jan 25, 2023 9:34 am
Posted in Classifieds - Parts
Replies: 1
by FATMAN » Sat Jan 21, 2023 12:24 pm » in Classifieds - Parts

First post

I have this 1915-16 hood former
on e bay nice and straight hard to find

Last post

how about 150.00 hard to find
Bob

1 Replies

266 Views

Last post by FATMAN
Wed Jan 25, 2023 9:34 am
Rain Gutters for 1927 Coupe

Last post by Humblej « Wed Jan 25, 2023 8:19 am
Posted in General Discussion Forum
Replies: 3
by BLB27 » Tue Jan 24, 2023 8:45 pm » in General Discussion Forum

First post

I wanted to reuse the original rain gutters from my coupe, but I have not been able to separate the two pieces. These are shown in the first three photos. I have purchased new aluminum gutters shown in the last two photos.

The primary piece of the original gutter was held in place by tacks. I appears to me that the secondary piece, witch covers...

Last post

Bruce,
I didnt have original drip rails when I replaced the top for my coupe so used the modern aluminum ones. I installed them without the backer, just the J shape and wood screws. Pre bend them to shape, drill the counter sunk holes, and paint before you put them on your roof. You can keep the ends square or shape them to simulate the old ones...

3 Replies

143 Views

Last post by Humblej
Wed Jan 25, 2023 8:19 am
Fancy back window

Last post by gldavis « Wed Jan 25, 2023 5:46 am
Posted in General Discussion Forum
Replies: 5
by Dollisdad » Mon Jan 16, 2023 11:06 pm » in General Discussion Forum

First post

8721BF2A-B140-4F46-A655-03EDD61A9224.jpeg 19032F65-165C-43AA-AAAA-8FBAC33793A4.jpeg 58DA8773-72B1-46CC-A3B9-4D855C2496A3.jpeg 4BA959C9-5E3A-446E-B558-4D2118771991.jpeg

Last post

That building in Kalkaska is currently for sale.

5 Replies

626 Views

Last post by gldavis
Wed Jan 25, 2023 5:46 am
Barn find

Last post by Kaiser « Wed Jan 25, 2023 5:15 am
Posted in General Discussion Forum
Replies: 7
by AndreFordT » Tue Jan 24, 2023 9:36 am » in General Discussion Forum

First post

Hey all,
I just found this in a barn.
Can someone help me to identify it and maybe put a value on it.
I think the frame is 1926/27.

Thanks.
Andre
Belgium

Last post

That is a strange engine André, does it use the T transmission ? Seems like it in the picture with the chassis. Early overhead valve, Peugeot maybe? Looks French in a way :?:

7 Replies

792 Views

Last post by Kaiser
Wed Jan 25, 2023 5:15 am
FS- Single Copy of Model T in Speed and Sport $15.00- new price

Last post by Dan McEachern « Wed Jan 25, 2023 1:17 am
Posted in Classifieds - Parts
Replies: 2
by Dan McEachern » Sun Jan 22, 2023 2:43 pm » in Classifieds - Parts

First post

Slightly worn- thumb dirt on edge. $15.00
Plus Flat Rate shipping of $12.00. Please send an e-mail to dmcgears@yahoo.com. Can deliver to Turlock Swap meet next weekend.
Check, money order or PP.
SOS single.jpg

Last post

bump to top

2 Replies

231 Views

Last post by Dan McEachern
Wed Jan 25, 2023 1:17 am
Speedster plans wanted

Last post by TRDxB2 « Wed Jan 25, 2023 12:26 am
Posted in General Discussion Forum
Replies: 30
by Caswell » Wed Dec 22, 2021 12:41 am » in General Discussion Forum

First post

Anyone have detail plans for the type/style of speedster pictured below, scale plans would be great, floor looks to be most of it. I would make seat riser to fit me. Anyway, any help would be great, middle/top ones (steering column/seat height) is more along the lines I would like to build.

Last post

Anyone have detail plans for the type/style of speedster pictured below, scale plans would be great, floor looks to be most of it. I would make seat riser to fit me. Anyway, any help would be great, middle/top ones (steering column/seat height) is more along the lines I would like to build.

While your reviewing this discussion one of the members...

30 Replies

2606 Views

Last post by TRDxB2
Wed Jan 25, 2023 12:26 am
running board brackets

Last post by dinosbunny « Tue Jan 24, 2023 10:50 pm
Posted in General Discussion Forum
Replies: 2
by dinosbunny » Tue Jan 24, 2023 7:00 pm » in General Discussion Forum

First post

What is the difference between 26-27running board brackets and the 19-25 brackets? Thanks

Last post

Thank you much

2 Replies

174 Views

Last post by dinosbunny
Tue Jan 24, 2023 10:50 pm
Low Head

Last post by Adam « Tue Jan 24, 2023 10:49 pm
Posted in Classifieds - Parts
Replies: 1
by tselliott » Tue Jan 24, 2023 9:50 pm » in Classifieds - Parts

First post

This one needs some work but should be worth saving.
This has the thumbprint boss on the back.
Nice crisp Ford logo cast in and the Made in USA.
Square casting mark near the water outlet.
The bad thing is it has a freeze crack and the number 2 spark plug threads don’t look the best. I threaded a spark plug in it and it snugged up. I didn’t want...

Last post

This is a 1913 head. The thick script and the visible “relocation” of “made in usa” are 1913 features (you can see where “made in usa” was below the script as added in 1912, then chiseled out of the mould and moved). Good that you didn’t scrap it. Someone should be happy to have it, even with the cracks.

1 Replies

311 Views

Last post by Adam
Tue Jan 24, 2023 10:49 pm
High Speed TT

Last post by Adam « Tue Jan 24, 2023 10:15 pm
Posted in General Discussion Forum
Replies: 7
by BUSHMIKE » Mon Jan 23, 2023 6:05 pm » in General Discussion Forum

First post

Does anyone have a pic showing the location of the “HS” stamp on top of the worm drive case? Id like to know what to look for.

Last post

I’ve found a few sets in early AA axles. As long as it’s still worm drive, they’re interchangeable.

Brad

I have found that they ARE NOT interchangeable. The couple of AA ring gears I've had were .200” wider than the TT ring gears and didn’t fit properly in the TT housings (they rubbed/locked up). The AA worm gears also were splined different...

7 Replies

396 Views

Last post by Adam
Tue Jan 24, 2023 10:15 pm
21” split rim

Last post by tselliott « Tue Jan 24, 2023 9:19 pm
Posted in Classifieds - Parts
Replies: 4
by tselliott » Thu Jan 12, 2023 12:59 am » in Classifieds - Parts

First post

Rim sits straight on the garage floor. Latch works.
I don’t see any markings on the lugs or elsewhere.
$100 plus shipping.
Scott Elliott
971-5O6-92O2

Last post

Sold pending payment.
Thanks MTFCA

4 Replies

500 Views

Last post by tselliott
Tue Jan 24, 2023 9:19 pm
1926-27 Windshield Stanchions FS

Last post by rickd « Tue Jan 24, 2023 8:36 pm
Posted in Classifieds - Parts
Replies: 4
by rickd » Sat Jan 14, 2023 8:08 am » in Classifieds - Parts

First post

Excellent quality reproduction windshield stanchions. Never installed. $140.00+$20.00 shipping. Check or money order. Email me through this site. ST1.jpg St2.jpg St3.jpg St4.jpg

Last post

Still for sale.

4 Replies

404 Views

Last post by rickd
Tue Jan 24, 2023 8:36 pm
This was trucking-Old Photos

Last post by Herb Iffrig « Tue Jan 24, 2023 8:11 pm
Posted in OT - Off topic
Replies: 1190
by Herb Iffrig » Tue Dec 31, 2019 8:55 am » in OT - Off topic
1

…

8

9

10

11

12
First post

I at one time had a book entitle This Was Trucking I just about read the ink off of the pages.
I thought that it might be fun to post some photos of trucks similar to the ones that were in that book.
Her are a few. trucking.JPG pennsylvania creamery truck.JPG valley lumber c.JPG

Last post

wagner meat truck.JPG
1190 Replies

238804 Views

Last post by Herb Iffrig
Tue Jan 24, 2023 8:11 pm

Search found 292 matches

Go to advanced search