MTFCA Forum

I am looking for a wishbone for the front axle, the one that has a stud to go through the perch with s good ball and threads since mine has bad threads and a bad ball.

Thanks.

For Sale: Model T Starter Switch. $20.00 plus shipping.

R/S,
Jonathan Bodine

Here's a handy device that adds a stand pipe in the gas tank so when you run out of gas you pull the string and tie it off to get to the last of the gas in the tank.The one gallon of gas remaining below the stand pipe will get you on your way to a filling station. Asking $70 plus postage.PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT...

With a record number of vendors, The 2025 Luray swap meet was one of the best ever. The forecast of heavy steady rain for Friday, only turned out to be on and off showers in the morning, with the sun out for the afternoon. Friday evening's vendor dinner was wonderful as always. Saturday brought sunshine and still a flow of shoppers looking for...

My Model T (1916 with a 1921 starter engine) came to me wired with positive ground. I would like to change it to negative ground (just because that's the way Ford did it).
Advice please: Can I simply polarize the generator by putting B+ to the field, reverse the battery cables, and go? Will the cutout work with no change? Should I replace the...

I’m located in Southern California and I want to buy a T chassis with engine and radiator. My budget is $1000-$2500

Yesterday my dad and went for about a 70 mile run with my 22 touring. This is the longest trip we have taken with it, although last weekend I put about 50 miles on it. Last weekend the car ran great and this weekend it ran great for about 30 miles. Then, while running about 35 mph, the car started surging. I would throttle down and it would clear...

This week I finally added the factory pinstriping to the late 1911 touring car that I finished restoring in November 2022. A big thanks to Keith Townsend for providing pictures of the pinstriping on his car based on his research into proper striping that the factory did at that time.

I took it out for a drive today, but it appears that the...

I recently acquired a large group of ancient (1910's to 1930's) negatives from the Kansas City Southern Railroad. These were once part of the railroad's files and are generally photos of railroad structures and the like. The Ford Model T manages to show up in some of the photos, so I thought I would share them here.

Jason Midyette

I would like to buy a block with a casting date between 9-1-13 - 12-15-13.

Let me know what you have and text me a couple of pictures to 901-496-8795.

Thanks.

Bill Everett

Cell: 901-496-8795

Hi Everyone,
I'm looking to install a RICARDO PAT NOV 13 1923 HEAD & would like to send it out to have it surfaced .010 to get a better gasket seal but I'm
concerned about piston clearance. The current area over the piston is .423 so I would end up with .413 with a gasket crush of .050 to .060.
I have found info on line of the stock compression...

I would really like to talk with the owner of this car; does anyone know who it belongs to, and can you get me his e-mail address or phone?

Thank you.

Bill everett

Cell: 901-496-8795

Model T Touring Tim Wrenn color scheme.JPG

I have been a reader (learker?) of this forum for many years but have not kept up with it regularly. One think I asked about several years ago is still something I am not completely clear about. I am under the impression that the first jack appeared in a Model T toolkit in 1914. Some have argued that another Ford jack was used before that, such as...

I have an assortment of Stewart parts available - more than I need for spares. If you're seeking something in particular, drop me a note through the Forum, please. I'd take $150 for the Stewart spiral drive parts (3 pcs.), either road gear - $40 each - all + the ride.

Forgot to a Stewart head - broken glass & rubbed numbers on the mph wheel but...

For sale: rear spring $125 plus postage
20220820_113535.jpg

Want to buy a front top bow socket for a 1914 Runabout. I need the passenger side if there is a difference. Thanks, Art

Making room for bigger and better toys! Been saving this mag drive for parts as it has new idler and driven gears installed. Magneto mount is clearly homemade, but appears to be correct enough to function properly. Cover has the typical fan belt damage and welding. Housing has the typical grinding clearance from someone trying to make the wrong...

Part of my rocky mtn brakes came off and vanished into the ether the other day. I don’t need a whole new set, but some of the parts that went missing on my country drive. Where can I get just some replacement parts?

Helping someone identify the year on a center door. The engine is a ‘22, but it has a metal firewall. It is my understanding the metal firewall didn’t come along until mid ‘23. I assume a 22 center door would have a wood firewall? Is it possible that someone rebuilding this years ago put a metal one where there was wood, or is this likely a ‘23?...

Cleaning out shop - Ford Pliers,Band wrench,Wood wheel puller{new}-one headlamp lens -Apco Mtr. Mount-Open Car Clamp on rear view mirror asking $175.00 for the bundle shipped to your location -give me a call Matt 503-824-2681

For sale: 2 wood wheels $150 each plus shipping
20241119_125544.jpg 20241119_125758.jpg 20241119_130014.jpg 20241119_130053.jpg

For sale: Timing gear cover for 19/25 $20 plus postage
20250324_175110.jpg 20250324_175118.jpg 20250324_175149.jpg

For sale: Stahl Magfixer for model t $250 plus shipping
20250424_233225.jpg 20250424_233125.jpg 20250424_233145.jpg 20250424_233322.jpg

For sale: u-joint $75 plus shipping
20241029_175803.jpg 20241029_175747.jpg

Paul B. Hanks was a successful young entrepreneur at the turn of the last century. He owned an insurance agency, as well as oil and coal interests. Born in 1873, he was ten years younger than Henry Ford. His photo was included in this 1906 article, regarding oil interests in Indian Territory (soon to be the state of Oklahoma):

IMG_6950.jpeg

As...

I bought this 1915 touring five years ago, since then I had the motor and transmission rebuilt, scraped all the paint off of the wood spokes, shellacked and pinstriped them, installed safety glass in the windshield, new radiator, redone the front axle and put on a new tapered leaf spring, had the coils redone, installed new top and seat upholstery...

WTB 26-27 hood shelves for a restoration I am doing with my grandson.

Its almost here. Time to get ready for the Mother Lode Model T Club 50th Annual Swapmeet, Auburn California. June 1. No reservations needed. We have plenty of space. Early set-up on Saturday, May 31.

FS: One reproduction brass spider, Fits a wood rim with approx 10 ID. Not brass plated steel, A magnet won't stick to it. Good quality casting. Asking $95 not including shipping.

tbspdr01.jpg

tbspdr02.jpg

tbspdr03.jpg

Thanks for looking!

To fix the mishmash of wheels my T has I would like to find a plain wood wheel, metal felloe and not demountable. Please let me know! Will Rice, Houston

….Can’t call them a “set” because Jno Brown 110 on left has a Steel chimney top. Right lamp is brass chimney top. I’d buy a mate for the steel top lamp. Wonder why Brown offered the steel top ? 1914 TT ? :lol:

Only $30. Don’t think they’re being reproduced/in stock.
+ free shipping to lower 48.
gwhouse731(at)gmail(dot)com

The Automotive Trade Directory Oct. 1919- Volume XVII- No. 4. Over 1,000 pages of interesting bathroom reading material! Binding is loose, some pages discolored, the color inserts appear to be all there but some are loose from the binding. Positive there is NO basement smell! $45 includes shipping in the CONUS...

Lamp lens on left has a high amount of purpleish coloration. Complete $200. Realizing FedEx costs are inordinately high, I’ll split shipping to lower 48 for only $20…
gwhouse731(at)gmail(dot)com

I will be selling the complete detailed 1914 running chassis that was to be the chassis for the C Cab body. Radiator is great, new fuel tank, extra cherry firewall, coil box and coils, new tires, POR frame painted, high heat POR on exhaust system, detailed Hassler Bee-Hive shocks at all four corners, 14 original engine, all excellent sheetmetal...

Along the lines of the similar topic in the T area of the forum, share what you've done with your A,B,C,F,K,N,R,S,SR Ford this year. Personally, I have done nothing, :( , so let's depend on you all to contribute!

Thanks!!

As a Model K guy, it's always intrigued me that Henry Ford chose/allowed a Model K to lead the racers out of New York to St. Louis at the beginning of the race. As with most contests of the period, a prestigious lead car was always selected as the Pilot Car to enforce any controls and set the pace in endurance contests. A question that should be...

In need of 26-27 Roadster Sill Plates Aluminum to finish a restoration I am doing with my grandson.

One set of Original T Ford Rear Body Sill Plates for I believe a 09-11. $40 plus $11 USPS Flat Rate Padded Envelope.
Please use email option to respond.

Thank you,
Terry

Door Sills Rear 09_11b.jpg

Mid-Atlantic Pre-War Swap Meet

TT Rear Axle Brake Drum. Appears to be in excellent condition. I measured the ID in three places with a digital caliper and it appears to be standard ID.
$40 plus shipping. Will not fit in USPS flat rate box. Provide zip code for shipping cost.

Please email through the forum.

NO PM's Please

Thank you,
Terry

TT Rear Drum 2.jpg

I have 3 gear drums, one has 3 cracks through the pin holes, $175.00. one has a weld repair in the face, $300.00. one is a brand new Floyd J reproduction, $1100.00. One brake drum with a bad gear, $175. One reverse drum, $250. All plus shipping. Kdmks AT att.net.

Does a muratic acid and water solution for rust removal eat away at brass or bronze fittings or bushings?
I know that a sodium bicarbonate solutions and a battery charger eats away at brass fittings.

I guess I was pretty clueless on the availability of new stock replacement Scat T crankshafts. How long have you guys waited when buying one recently?

The Old Car Festival registration opens June 2nd! Last year they filled up in a matter of days, so if you want to go, be sure to get ready with your photos and information! Two days of driving and displays at the historic Greenfield Village, Dearborn, Michigan!

I have an excellent used exhaust manifold for sale. Pipe threads are very good. No pitting. Not a repo.

Just a reminder that the Little Hershey swap meet put on by the Rockford Model T Club will be Saturday May 17th this year at the fairgrounds!
Screenshot_20250506_060825_Chrome.jpg

FS: Rough Aluminum castings for a bracket and timing cover, unmachined, for attaching a side drive magneto. The timing cover also has a boss for mounting a cam-driven oil pump. These were done probably 50-60 years ago and have been sitting ever since. Asking $105 not including Shipping.

tsddrv01.jpg

tsddrv02.jpg

tsddrv03.jpg...

Supposedly, a basic, compact, pickup-type EV will be available for around $20 K sometime next year. (The Slate ). It's an interesting concept. Range 150 to 250 miles, EPA cycle. Motor is 150 KW, or about 200 HP. 1/2 ton+ load capacity. Regular cab, 5 ft bed standard, with assorted, post-purchase options for different body configurations, such as...

Annual time for clean out - full set of near ready to mount Hassler Pancake set w/new gr. 8 bolts & a few extra parts - $300 for the lot + the ride. Several sets of NOS Scandinavia lining sets - a couple original & a couple sets of CANTEX of the correct length & weave - $100 a set includes the ride in the U.S. I have a lot of chassis parts to...

Trailer is getting full. Just two more weeks until the Mid Atlantic Pre-War Swap Meet in Luray VA. Make sure you stop by spaces G-9 & G10 For super deals. Prices to low to list here. Can't wait to see everyone ! Darryl

Have one pair of early style pan ears. Solid. Still has some of the pan that will need to be ground off.
$25 plus shipping

mikebird@lifeattheridge.net

IMG_3308.jpeg IMG_3309.jpeg

I have had a change in direction and my Model T tool collection needs to be moved on.

KRW Pan Jig and tooling
KRW Combination Machine and all tooling etc
First option on smaller tools, KRW, Stevens etc will be offered to the purchaser of the big items. Don’t ask about the smalls, unless you’ve taken the big rigs. :P

Seems to be no serious...

FS: One Kingston 4-Ball carburetor body only, the butterflys, balls, float bowl, etc. are all gone, just the body is here. The brass looks good, no cracks or major damage. It looks like a good start for a rebuild, but you don't know until you start digging into it. Asking $40 not including shipping.

kng401.jpg

kng402.jpg

The patternmakers...

Assortment of steering column supports castings need holes drilled some are Model T and some Model A asking $100.00 for all shipped to your location give me a Call Matt 503-824-2681

I bought a spare lamp for my 1912 Commercial Roadster at Luray. My Dad always said to carry a spare lamp in case one burns out! :D

What is explanation of the trouble if the magneto pickup at the top the hogs head is the reason for the engine missing?

2025 Minnesota Model T Reunion

2025 Minnesota Model T Reunion

This is an original water outlet for the 09-16 but is the replacement part that was sold by Ford dealers according to Gail Roddas book.

$60 plus shipping

mikebird@lifeattheridge.net

IMG_3313.jpeg IMG_3312.jpeg

I have a 1914 Ambulance project that I started a year ago and I have to many projects at this point in life to finish it . This is a quick project that has all the items to make it a neat little WW I Ambulance. Asking $7,000 O. B. O. Send e-mail for pictures or contact# to discuss the project.Thanks, Dennis

Will sell parts or one bundle price. Have an open valve engine complete with title and Benson Ford document showing as March 3 1911.
A new Ray Wells 1911 touring body complete with original hardware from a 1911 doner body. This body has floorboards, seat boards, and
a dashboard. Top sockets with bows, original old dashboard with all hardware for...

What is the difference between 15-16 headlight mounting posts and 17-23 posts. Iam trying to identify some I have or are they all the same and interchangeable?

Due to continuing health care issues, I regretfully have decided to sell my final build project that is beyond my present physical condition. It is a brand new, never been mounted
Richard Currier 1912 Delivery Car (C Cab) body complete.
I have continuing problems trying to post photos on this website so I have several photos of the body, always...

Tie rod yolk for 13-18. Very nice. Clean threads. Possibly NOS. $25 plus shipping
mikebird@lifeattheridge.net

IMG_3315.jpeg IMG_3314.jpeg

One very nice set of demountable bands for the 26/27 transmission. Ford script. Lugs show no sign of wear. Price for the set is $60.00 plus $16.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_145023.jpg

20250506_144943.jpg

This a reproduction of the early style water head outlet 09-16
$50 plus shipping

mikebird@lifeattheridge.net

IMG_3311.jpeg IMG_3310.jpeg

Free: I have about 8 boxes, each containing 1 gross (144 pcs) vintage Wood Screws, No. 10 Size, with Slotted Pan Heads, 1 length, made of plated steel. Length measured from bottom edge of the head to the point at the end of the shank. The box says these are round head but to me they look like pan heads, maybe the meaning has changed over the...

Do the job once, and do it right!

What you get:

(1) The Original and Only - Full Flow Float Valve™ with lead washer
(1) Pair of high quality USA Made taps for float valve threads, needle valve threads, and jet threads
(1) Full Flow Float Valve™ Installation Tool
Free Shipping within contiguous United States

Available nowhere else

Offer valid...

As found. Float is present, as is choke horn (missing band ). Includes an adapter flange to rotate the orientation of the flange. Working condition unknown, good candidate for rebuild or parts. $150 includes shipping in the CONUS

One set of very good used Timken outer front wheel bearings. Price WAS $50 NOW $40 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250506_125348.jpg

20250506_125400.jpg

How thick should flanges be for an exhaust header?

: ^ )

Screenshot_7-3-2025_10813_www.google.com_.jpeg

I'm looking for a set of rear doors for a 26-27 Fordor. Hoping to locate a pair that are damaged or rusted on the bottom. Not going to ruin good doors. Need to cut off bottom 4-5 inches for a snowmobile project. I'll be in Luray and Hersey.
Brian 586-864-5110.

Im getting ready to respoke a set of wheels for our 25. The old spokes are removed, and im looking to order new ones.
I want to make sure that this is not a ford felloe, but a hayes, needing the slightly longer spokes.
Im holding an old spoke up to a new spoke in my 22's wheels, which has the slightly longer spoke.
I'm 80% sure they are hayes,...

I’m building a 26/27 Roadster pickup from parts. I have one body with a cowl and another cowl by itself that is in much better shape so I am swapping them. I “think” the cowl I have is a 26 as it came on a 26 frame, the body with the cowl is definitely 26 or 27 but I’m not sure which. I now see some differences in the cowls as I swap them, one of...

I have parts to assemble 2-- 26-7 Chassis', at this time it is apart to be picked up easier and stored. Located in Ct 06013 Delivery available for cost of fuel within 100 miles. $3500 EACH,. E-mail with interest or E-mail phone # and I will call you back, Thanks, Dennis

Original polished brass Stewart Warner horn. Excellent condition. No damage or dents in bell, emits a very loud “Aaaaawhooo!” When hand plunger is depressed. Beautiful horn, ready to mount and use. 300 includes shipping.

IMG_3550.jpeg

I have a 17, it is to my knowledge that the front should have 6-7 leafs and the later models have 8-9, mine has 9, should I just take the top 2 off to make it 7? Or do I have to get a new spring which in that case I'm leaving it. Additionally the u bolt looking things that hold the spring up on the t, what's it called, I need to get new ones since...

I had the honour of being invited by the President of the Taree RSL Sub-Branch to take part in the ANZAC Day Parade, driving my Model T down the heart of Taree’s main street. Riding alongside me was 99-year-old WWII veteran Dulcie Balderston, who enlisted in the Royal Australian Air Force at just 18 — an incredible legacy of service for which we...

Good Morning! On this day in 1945, the U.S., U.K., and other Allied nations celebrated Victory in Europe Day, marking the defeat of the Nazis in World War II. AMEN!

IMG_2349.jpeg IMG_2346.jpeg IMG_2348.jpeg IMG_2343.jpeg

I have a set of Dayton 48 spoke pin drive wheels but the tapers in the rear hubs were bad. I want to use the wheels on my 26 speedster so I decided to make some new hubs. I have a Grizzly lathe and Precision Mathiews mill and enjoy making things.

I found some inexpensive 4130 bar and plate that I had welded together to make the basic shape....

For sale: 11 tooth pinion $50 plus postage

20230318_174230.jpg 20230318_174425.jpg 20230318_174304.jpg

Does anyone have a contact for Joe Bell who rebuilds engines?

Rolling chassis

1925 engine - runs!

Good 26/27 rear axle

Good front fenders and running boards

$1500 OBO

I have many more parts available, call:
541-two-four-7-seven-six-54

Located on the southern Oregon coast

Rolling chassis

1926 engine - runs!

4ea NEW Universal 30x3-1/2 tires and tubes, mounted on good rims

Model A bed

Has many other good usable parts

$2500 OBO with tires
$2000 OBO w/o tires

I have many more parts available, call for details:
541-two-four-7-seven-654

Located on the southern Oregon coast

I recently received an aftermarket fuel gauge that I bought from Jay Buscio. It looks great, but age has taken its toll on the cork float. Do any forum members have any advice?
While searching for a suitable replacement, I found a source of straight sided cork on Amazon. It appears that the original has a coating on it, but I read that cork is...

Very authentic 1915 Ford Model T Runabout/Roadster and car trailer to be sold as a package. Single axle trailer, professionally well built and hardly used. The car is a 1915 throughout with exception of the kerosene side and tail lamps may be 1916 or so. It runs well, tires are like new, paint is pretty good, body shows some amateur quality body...

Decent pair of 15 16 only head light buckets 100$ shipped lower 48 these are a hard find

For sale 10 tooth pinion gear
$80 free usps in the usa.
Just washed it off so you can see it.
Nice used condition.

Car is in need of interior, Tires, tubes, top material and paint. Have all top iron sockets and new wood. New wiring and switch parts. Sheet metal is in good condition with no rust, engine runs and car drives comes with clean Colorado title. Pictures to you text or email. this is an excellent car for restoration. Jim nine7zero3seven388six4.

So far, the weather guessers say showery in the morning then clearing up by 1400 or so. You know what, who cares? a bit of rain won't stop us. after all, how rusty and rusty car pars get? Sat and Sun are going to be great for the tour. Come on out and have fun! My wife is picking up our daughter from UVA and driving straight to Luray. A friend of...