MTFCA Forum

I have a photo in my files that I cannot post right now that shows the comparison of a later sedan to a Centerdoor. It shows a 1/2 round molding that covers the seam from the roof to the rear metal panel.

Is this accurate, or was the rear panel just nailed over the roof with nothing to protect the seam?

This is very odd. All posted photos in any discussion thread were automatically displaying as of yesterday. I signed in tonight and now there are no pictures showing in any particular thread or post by a member. The only way to view photos is to select the 'jump to post' on the right of the particular member comment and when that opens, you can...

1927 Touring, I can not see a way to mount the radiator with the springs, without having the radiator mounted solid to the hood shelf. the picture shows where the mounting hardware would end up if the springs where fully collapsed, using new spring, which when collapsed are shorter than the originals.
The only thing I see different than all the...

As copied from our beloved Forum Administrator, AdminJeff, (AKA Jeff Stevenson)...

- keep your description as clear and concise as possible in the Subject of your post. This is the first thing ppl see.
Preface the subject with FS: or For Sale: or WTB gives a clear indication of your intention

Good: FS: 1921 sidelights, excellent condition...

There was a fellow on here looking for parts for 13 top shocks. He did not show a picture that look clear. Anyway, I have three pieces here. If he sees it, let me know and if any of you need them, let me know

I was surfing the internet and came across a 1916 Ford for sale. It has a red front floor mat. I have never seen one of these before. I have only heard of black ones or white ones. If this is not an original Ford issued mat I might wonder if it is an old reproduction, or a white one that turned red like the white tires that turned brown. red floor...

Here is a one of my Reamer/Taps that was an odd one. By odd I mean it is an extra one from a batch. When a run of these made an extra few are made in case there is a screw up. I have to take them all. So I ended up with this extra one. $220 + shipping. Email me at address in pictures. Thanks Dan
IMG_0094.jpeg
image0.jpeg

I purchased the coupe from a farmer when I was a junior in high school in 1954. I started the restoration in the fall of 2020. I want to share ten photos to show what it looks like today and what it looked like with my father and mother standing by it in 1959. They had just driven it in a parade celebrating the 75th anniversary of my home town in...

I’m finally getting around to pulling the Hogshead today…. I hadn’t noticed it before, but I have got two pieces of iron that go from the upper portion of the engine block, where they were bolted, to the frame…… on other pictures I’ve seen of that area….they do not exist…. does anyone recall what year they were added?
I remember several people...

Nice used light switch / horn button combo bought from Model T Haven years ago for a project that got sold,

$65.00 plu th ride.......email me thru this site

Built a stainless steel muffler from scratch.
SS Muffler.jpg

Last year when I was restoring our 1911 touring car, I discovered that one of the rear wheel spokes had a widthwise crack. My guess is that it had been there a long time and caused by one of those wheel puller designs that grab on to the spokes for leverage... The wood on the wheel was in otherwise good shape, so I carefully took the wheel apart...

on early model t brass bubble horns :o

We are putting on a tour to Hungary, Europe in August of 2024. Daily itinerary and price structure available, just call or email. Registration has to be early to insure hotel reservations. Your own car is shipped by ocean containers there and back.

Has anyone used the wireless LED bicycle turn signals available form Amazon for around $60? They are rechargeable, said to be bright and easy to install (on a bicycle). If adaptable to a Model T without drilling holes, running wire etc. this could be an ideal safe solution to driving in traffic.

I have matching right and left rear fenders for a 1925 Ford Coupe. Both fenders are in good shape. They need to be beadblasted and painted. I did not paint them because I wanted you to see there is NO BONDO. Asking $125 for each fender, $250 for the pair. Shipping is on you. I can deliver for free to Richmond IN for MTFCA homecoming OR I can...

We are getting smoked out over here! Canadian wildfires coming down the east coast. Yesterday was very hazy. Today is the same but I can actually smell it. Hope everyone is ok up north.
E385CA06-7E12-43C9-BEE4-D121DD86B159.jpeg 0F9A522D-1032-429F-91DD-D91B9B815953.jpeg Pictures from Maryland

Bryant

Maybe a dumb question. Can I use a grounded out T coil on a test stand for something else?
Grounded out meaning the high tension lead grounded to the commutator terminal.
Thinking 6-12 Volts to operate the points. The tests may be several minutes long.
All testing is non-destructive meaning the coil could be cleaned up to use in a box as intended...

Hi all,
I am trying to figure out what this number is stamped on the ignition switch. What do you all think?
Thanks,
John
ignition number.jpg

Good evening friends. We have a '15 T 3 door touring that I am rebuilding the box that holds the 4 coil boxes. I got the composite kit from langs. The 10 posts that screw in all have threads leading upto the squared head of the bolt. The composite back has predrilled round holes. With a wood back, I've been told that the pressure when tightening...

Bruce taped a segment last week at the MTFCA homecoming of our racer.

Kleps Garage full Homecoming video:

Does anyone have a diagram of the wiring inside the T horn. The one I have has had the wiring removed and the contact plate is just hanging in mid-air. Thanks in advance; Bruce

Hello,

If we were back in the era of the Great Depression, and you had to turn your Model T into a Bennett Buggy / Hoover Wagon / horse-drawn vehicle, what would you do with the front and back radius rods once the engine, transmission, steering, and driveshaft had been removed?

My husband and I are trying to take a 1:25 scale model kit of a 1925...

I am looking for a hitch that will work on my 26 touring. Also looking for a used top boot (even one too bad to use that I can make a pattern off of would be fine) and a set of old but usable side curtains.

Thanks

Does anyone have one?

Ok….312 is new….. I just took a micrometer to my valves stems. The worst one is 308 and a half…the rest are split 309-310
So….2 to 3.5 thousandths under….how much is too much…. I’m tempted to use standard valves….. there appears to be very little side movement when I put the 310 valves into the valve guides…thoughts?

2023 Model T, 6 Day Golden Gate Tour Pictures The Redwood Empire Model T Club was there.

The car is in excellent condition and runs great. This is an older professional restoration of an all-original car. The gloss black paint and interior show minimal wear. It has been meticulously maintained and has extremely low miles since restoration. Reduced to $16,000 OBO.

It has an I-timer, a Brassworks flat tube radiator, electric start, and...

Just now on my boss's retirement party day, we had a race between my '26 Roadster and his 2022 Electric Bike. He won by at least 5 or 6 car lengths! It makes me wonder what Henry would have thought about today's technology.......

Combination rim tool-- adjustable. Has had a weld on the handle. Neat wall hanger for sure. 75.00 plus shipping. ctleonard64@gmail.com IMG_20230609_123347427.jpg IMG_20230609_123326600.jpg IMG_20230609_123313970.jpg IMG_20230609_123412961.jpg IMG_20230609_123402327.jpg

I have a 19 TT truck which still has original wheels and solid rubber tires in the back that are starting to show signs of their age. My question is will the later hubs / drums fit my 19 ?

Original cast aluminum “NOPOWERLOSS” brand explosion whistle. Patented Jan. 20, 1920. Made in Chicago Ill. Adapter screws in spark plug hole and works on cylinder pressure. Cylinder fires normally. Emits a loud chirping whistle sound when lever is pulled. Includes nice Firestone plug. Does not cause loss of power when activated. Nice original...

Many of you have already seen Paula's ( SweetTing ) YouTube video on the Homecoming Pictures post. But, in case you have missed it, here's the link- be sure and give her a thumbs up . She's put a lot of effort into the video for us.

When Ford built magneto coils, we're they coated with any sealer before or after mounting on the plate?
Also what type of fabric were they wrapped in and what would compare with it today?

Were these locks ever reproduced? Seems there are many on sale in ebay, facebook, etc. with varying degrees of selling prices. Chapman Miller wheel lock.jpg

I would like to make a rear mounted luggage rack for a wicker basket (have yet to get one) on my 1913 touring. Any advice or information would be helpful. Pictures would help as well.

Looking for two sets of 1926 or 1927 front fenders. Preferably something in rough condition. I can deal with splits, dents, torn bolt holes and rust.
Prefer close to Dallas, Texas, but willing to ship if the price is right.

I'll be driving my speedster there on the 20th, if anyone wants to tag along. Fargo, Soiux Falls, South Soiux City, Lincoln.

I need suggestions for stop lights/turning signals for my 1927 coupe. Locations and types, etc. I have front and rear bumpers. The rears are the short split type.

The suppliers' catalogs have a number of options.

The Model T Ford transmission repair book, published by the MTFCA, recommends a 15 gallon solvent or oil drum makes a nice stand for an assembled T transmission for charging or other purposes. Fifteen gallon drums are much smaller in diameter than 55 gallon drums. My question is for someone who uses a 15 gallon drum for a transmission stand, WHAT...

Located in Nashville. Pick up while you’re in town for the honky tonks or pay for shipping.

Here is a TA14/15 Mike. This is a direct read Mike made by Starrett. Only selling cause I am downsizing. $225.00 + shipping. Email me at address in pictures. Thanks Dan
8D46C8B1-F568-44FE-A191-2E0ACF5B632E.jpeg
B179FB46-B286-46C2-970B-BF8D31CD58C3.jpeg
1191AAC7-0F8E-49F4-B330-BD3A877C4739.jpeg

With the early cars, at least prior to 1917, there was a parts list booklet, and with it was a list of tools included with the car. On that tool list is a #27 wrench. I can only assume it is the band wrench. But why? Why didn't they just call it what it is? The other booklet included was the Ford Manual.

I plan on bringing the following to the June 1th Model T Ford swap meet at the Dakota County Fairgrounds in Farmington, MN

Otherwise, local pick up in south Minneapolis

Pair of NOS 1917-25 rear fenders

My father acquired these new-old-stock fenders from a Ford dealer approximately 70 years ago

Correct for the following model years and body...

Hey all,

I am restoring my fathers 1927 Model T. I have done the work to the engine, frame, rear end, etc. The issue I have is the body. I am not an auto body person. I have been calling around trying to get someone to do the body work. Collision shops are not interested and if I go to a place with restoration in their name the price sky rockets....

Pretty good pair of 1910 running boards. These are pretty solid, a few extra holes that they acquired over the years. $200.00 plus postage. Kdmks AT att.net.

My information about when the crankshaft was changed to an AA with chromium being added and changed to an EE with vanadium being added.

Were there any earlier changes added?

Evidently, it was not in Bruce McCalley's Big Black Book.

Does anyone have an answer?

Engine # 13,544,527 Frame # 13,563,909 Price: $12,500
Licensed in Alabama (no title state). Have previous Virginia and Minnesota titles.
2011: Engine rebuilt (have receipts). Magneto rebuilt and new radiator (no receipts). New exhaust manifold (have receipt). Car repainted in this timeframe.
2019: Rebuilt ignition switch. Starts on battery, runs...

1 new 1909-14 white floor mat. This is probably quite a few years old but is still soft and in great condition. This is one of the old high quality ones. All the money goes to RV Anderson’s wife. $200.00 plus postage. Kdmks AT att.net

Assisting a friend who joined The Club last fall during a NWVS Endurance run - seems a coolant leak (Z head in question) into #3 cylinder caused a tube-lock which bent the rod, broke the crankshaft at #3 then proceeded to take the rear main bearing web out of the block !!! I installed this rebuilt short block into this speedster 5 years ago and he...

2C98674A-CB40-4DCF-A9F4-EDEE09B98688.jpeg 9943FB0B-62C9-44E6-AC4F-E6C295098A32.jpeg D74C5B68-3079-4497-B895-FB91DD52E721.jpeg E3AC3999-E3C2-4533-A42C-681EF3816EC7.jpeg

Here is a set of 4 wire wheel hubs. Just out of the blast cabinet. The front hubs have a couple issues (like most original hubs). Both have a spot that’s either a crack or a casting flaw. Kinda hard to tell. Tried to show this in the pictures. The rear hubs have nice tapers and keyways. The drums have some heavy pitting.

$250 plus shipping in...

Anyone know if this is an AC or DC horn?
Does it ground thru the mount or by one of the two wire leads?
I'm electrically challenged....
Thanks!

I am going to part with this pair of bumpers for a 26-27. They came off my 27 Fordor. I can break them down for shipping. What you see in the photos is what you'll get. I'm asking $250.00 for all, plus actual postage. Eric 2 six 9, for too oh, 3 ate five 2 20230510_193615.jpg 20230510_193615.jpg 20230510_193632.jpg 20230510_193648.jpg

The Daily Beast
Tourists Watch Russian Man Get Devoured by Shark on Egypt Beach

Awful story. Just awful.

Does anyone in here know how to adjust one of these? I've been scouring the web on these things and have found a bunch of old adverts for them but i can't find a manual or anything about where the adjustments are. the mixture screw seem pretty obvious, but is it a set it and forget thing because there looks like a jam nut/wing nut on there to lock...

Progress Report and Meeting Invitation

The MTFCA Heart of Delaware 2022 Roster has been laundered, by the newly appointed secretary, to only include Delaware residents and interested Model T owners and friends of members that live in adjacent states and withing 100 miles of Townsend, Delaware or less.

This new and improved roster has been...

Have a Stewart swivel for sale cleaned and greased.
1959 L4
2 1/2 to1 and left hand.
L4 April 1919
Good working condition $250 plus shipping in US
Will also include the fiber gear.

Out of the 15 units I took to the swap meet, I have the following left over and available now:

Qty 2 - 6v T Starters
Qty 3 - 6v T Generators

I'll be back home Saturday and can start shipping them then.

Jeff

row of starters.jpeg
.
starter housings.jpeg

My entire rebuild process is described in gory detail on my new website:

Forum...

9F049AF1-39A1-4540-82DD-41AE1440876B.jpeg A1D82421-1DD5-43A0-A3D2-875D9C401D20.jpeg D73F38D7-DC77-4B94-9D7D-C7B00C66D804.jpeg B71AF459-5ADF-47DC-A0F9-600E29EDBE0D.jpeg

Does anyone know of a stone guard available for tall T radiator? Did they ever use one?
With the price of a radiator these days it might be a good thing.
John
Oscoda, Michigan

This Stromberg LF Carb #977029 Looks nice and is complete with the fuel connection globe. All screw slots and fittings look good and unmolested. The acorn nut for the float adjustment is missing but available. These LF's were a good improvement for anyone not wanting to pay the very high prices for the OF on a Model T. $150. or Best Offer...

I know I'm asking allot with little information, but some guys love to dissect photos. Headed to pick this up next week. Its been handed down with little information and the current owner is not knowledgeable about it.

Im only a year into the hobby so Im just looking for insight as to what this car was. Windshield frame makes me say closed car,...

Two new driving videos Newbies should watch for shifting timing. He's barely through the intersection when he shifts, retard the spark and take your time. It's not a race. Great sound and visuals. Thanks Steven, Sorry Scott C.

Our 1911 touring car was delivered in November 1911 to its first owner who lived in the LA area. Does anyone know how Ford distributed Model T's to California, or other far flung places away from Detroit during those early years? I read that Ford set up assembly centers in different cities in the early teens, but was wondering if they shipped them...

C1F9C9D6-01D8-45A3-9107-D116D0A69FFC.jpeg 787FFA78-11E2-4ECD-9964-1222ED62EAF7.jpeg 54D538CA-3BAE-4CE4-A3BC-7BF683617E8F.jpeg C445F617-D0C4-4FB7-8BB3-408E106F28D3.jpeg

Here is what any young man would want to get into the Fordson engine rebuilding. It is a Hempy Cooper Fordson main bearing boring machine, a Fordson main bearing pouring jig and a homemade Fordson flywheel magnet leveling tool. I am downsizing my shop so they are for sale. Hempy Cooper works, has fake cams and crank handle. Do see any cutters ,...

I have an original unrestored touring for sale, no title. Has original upholstery, but top needs covering. Runs, and has good tires. $18,000.
Larry Smith. Reply for contact information.

Some highlights

Here is a very worn incomplete rocker arm set up for a C? 30 or 31? Rajo OHV. The 4 original rockers need bushings but are rebuildable. The rocker shafts have some substantial wear and grooving from a hard life. The original? rectangle stands are solid but holes are out of round on one or two. Nothing a few bushings and some creative hands can’t...

I was able to procure 8 brand new 30x3.0 clincher rims. 2 are already spoken for. As far as I know this is the last of these that I could find. They are from the same batch that I supplied to Lang’s 2 years ago. Price is $195 each plus actual shipping, boxed 2 per box. There are just 6 left and when they are gone I will not have any more...

Hi All,

I am working on a 1911 Torpedo.
To do the job right I am looking for the firewall to frame bracket set.
In the parts catalog from Chaffin's Garage I found the part number for these brackets 3640/41T.
Since a few days I am trying to contact them for asking if they have them in stock but can't get an answer.

Maybe somebody out there can...

This weekend I installed new tubes into my new Riverside tires and put them on my new Australian rims. Some of the valve stems seemed to point straight, some lean outboard. Should I be concerned? The tube holes in the rims and the wheels are slightly outboard of center. The tubes have a blue stripe on one side. Is the blue stripe meant to identify...

Auto camper a.jpg

A minor item, but I am curious, what others do; that is, paint the carb heat pipe or leave it bare?

I am working on installing new condensers I purchased from Langs. I am working on 4 screw brass top coils, 6 screw brass top coils and 4 screw copper top coils. Look at the attached diagram and you will see that I have recorded the ohms taken from point A to point B along with my readings recorded on the left. These were taken with my 40 year old...

Selling for a friend - Prefer Paypal to Family & Friends - checks take longer
Nice Single Twist Brass Nonpareil Brass Horn with reed - see photos zoom in $120 + shipping
Note: soldering on tube near reed end and dent on bottom see photo
E21751-1.JPG
E21751-2a.jpg
E21751-4a.jpg
E21751-5a.jpg
E21751-8a.jpg

1924 Coupe
i wasn't getting any reading on the ammeter so i watched a few videos and set my cut off switch to 6.5 (It was at like 2) and started moving the third brush. (toward the engine) Still nothing shows on the right side of the meter. I do think the meter is working as it shows a negative 1 when i turn on the lights (brights). Is my...

Another on for a collection. Don't anything about it... $30 plus shipping. Prefer PayPal to friend & family will accept check & cash
IMG_4546.JPG

While looking over the bones of my Centerdoor I’ve noticed that the windshield was never drilled for a wiper to be installed

I assume the car was built and sold without one

What gives?

… or ‘sheath’. Who doesn’t need one ? Solid. Possibly original paint. No spark/gas rods. No steering column shaft or 5:1 gears. Only solid sheet metal. Not being repopped but all other components are. Need more pics ? Only $55 + the ride… gwhouse73(one)(at)gmail.com

…if not Real NOS. No evidence of rivet installed or removed. Light surface rust. No pitting. Only $50 + the ride
gwhouse73(one)(at)gmail.com

Bought this LF off of eBay. Cleaned it up inside and out. Very little wear on any of the parts. Went to install it today and realized that the flange bolts threads are small then manifold holes and course thread. Spacing is correct. Is this the correct LF for a T, or did I not do my homework before I bought?

When I nest the bows correctly the third bow is 5/8 wider than the measurements call for. Is this going to bite me in the butt when I put the top on? Or should I build it to the correct measurements and the bows not nest?

I recently acquired a TT ruckstell for my truck and I want to open it up and figure out what I need to replace. Also, I want to find a shifter that goes in the middle of the floorboard and not through the handbrake hole because I want it to be next to my Warford shifter. What type of shift assembly do I need for this setup? Do I need any special...

Morning, looking for a useable tall T radiator. Can pick up in AZ or SoCal, thanks!

DF345789-0997-4B45-826E-0A0C7A8B9F81.jpeg

Early front hub.

Just a reminder for anyone interested. Great swap meet for T parts.
A4ABEF8B-DDF9-4535-A8E2-9005872AA005.jpeg

Harnesses 1- 5 appear to be new #4 has some discoloring on some wires likely heat from soldering as the wires look unused.
Did continuity test on the #2,#3 & #4 harness only. Didn't want to open original packaging
Prefer PayPal to Family/Fiends prices do no not include shipping (expect USPS Priority Mail to be $10)

#1 T-5031 1919-25 Commutator...

I recently found pictures of a 1924 TT C Cab that belonged to my great grandfather and the back of the truck looks different than any C cab I’ve ever seen. Instead of having an oval ring around the rear window, it has a diamond ring. The body looks like a Ford body except for the back of it. Was this a custom job? I am going to get it out of...

Priced as noted plus shipping (need zip to calculate) prefer PayPal to friend & family to my email address
#1 & #2 Used Cam Shafts $10 each #1 Sold
#3 & #4 new cam bearings $90 each Sold
#5 & #6 new/used? from the Krull Estate were carefully wrapped assume for reuse $40 each #6 Sold
# 7 - #12 for re-babbitting $10 each
#13 & #14 for...