MTFCA Forum

Must be one out there somewhere

Still looking

Jim Key:
We know how to identify the early brake drum(pre 16) We know that a distance plate & 26 disks are required. We know what the earliest clutch hub looks like. We know what the later drums look like & 25 disks. We know when the top hat bushing changed to 3 thrust washers. We know how to identify the earliest & latest clutch hubs.

We dont...

There have been discussions on this subject here. /////// See below......

**** I tried a forum search using: Evans coolant Many relevant results from several forum members.

I have my 24x40 3 bay shop...
Then I have a 12x24 storage shed for yard stuff, bikes, Xmas, boxes of stuff etc.
The shed showed signs of rodents...
Guess where my wife insisted the Xmas stuff was to be stored this year...
I tried to protest...it didn't work....

sold pending payment

Mark, put me down for an order on the spare tire set, email for what I owe you. Thanks again!.

My '26 speedster came with a low head. I have a high head in my stash. It looks like the high head has larger water jackets (better cooling?). What would your suggestions be on which would be best and why?

Thanks!

To answer your question, it kind of depends on what radiator you're using. The low head water outlet lines up well with a brass...

If you cleaned them up, so folks could see the condition of the gear teeth, you might be able to sell these.

I agree but my wire wheel is outside in the cold.
Supposed to be in the 40s next week and I will.
Thanks

I can certainly sympathize with that. :)

Here are some methods

I have two will Send you a PM Tomorrow with some pictures

Even though Ford used 777's from the factory, I have found 888's to be a perfect replacement, and less weight too.

Russ Furstnow makes an excellent copy of the leather spring pads.

Maybe the 3/16 laminated glass is for flat side windows in modern cars, anything to reduce weight and cost. As indicated, for windscreens, 1/4 is the rule.
Most of our colonial built T bodies have steel channel frames and the glass bedding is thin fabric like hide-em welting.When I have windscreen glass fitted I have the glass fitted with bedding...

Things are coming together nicely on planning for the meet.

Team made a slight layout change to place the Ragtime Racers exhibition track off to the side.
The old layout had the track between the swap spaces and the gate, which I think we all can agree was not the safest arrangement. So while the racers will park among the spaces, there’s a nice...

20250905_144817.jpg
Route 66 near Waynesville Mo from Hillbilly Tour 2025

I don't think the line across the radiator on the touring is a fender brace. It appears to be attached to the radiator shell. I'd guess it's an accessory or owner added item for the purpose of retaining a lower radiator winter front to prevent the radiator from freezing in cold weather. It evidently isn't for mounting a license plate.

All sold, pending payment, thanks Erick

Marty, I have a 26-27 rear end, driveshaft and radius rods I’d sell for $80. It’s on a farm just north of New Braunfels so you’d have to drive nearly an hour to see it. I’ll be there tomorrow (7 Feb) morning…and it would have to be rebuilt

You can heat seal the edge of synthetic fabric so it doesn't fray by holding it taught and quickly running the edge along a candle flame. I watched my sister do this years ago when she was making a down vest with a nylon fabric shell.

On Youtube, there are also how-to videos on how to heat seal the edges of synthetic fabric using a soldering...

Why don’t you send an email to James thru the Forum?

I only had 10 of the style on the right !

Thanks Dan. Now here is where things are confusing to me. Tim above mentioned his #1 Top Socket was 25 in overall length. My new reproduction #1 Socket is 26 overall. (My 1915 Socket is 25 ). Tim shows a measurement for the #1 Socket & Bow at a total length of 36 . According to Dan's post, the amount of the bow protruding should be 6¼ ...which...

this is a great show...hope someone brings some frames.....

I won’t be able to make it but I have a 26 frame about 3 hours north…

Here is the example available now on the HCCA website;

Back to the top

If you need some of these better get them soon.

I already started the welding and filing process on the pedal cam, but the last two posts present viable, inexpensive solutions. Thanks for those.

A few comments: 1) If you are reaming the rear bushing to compensate for a front or center cam bearing bored off center, that's just plain bad practice. Replace the bearings or adjust your method of boring them to get them concentric with the OD. Reaming them to size in a bench vise is a good way to get them off center. They should always be bored...

45 including shipping?

To The Top

Looks like a lot of fun, Dallas. Always nicest when the cosmetics age together.

Extra points for being a working truck!

There are several wood wheel rebuilders. They service T wheels. I'm not sure about TT wheels.

I wish you weren’t so far from Texas. Mine was cast the same date. I can’t make out the serial but might have been made the same day. Mine is 429170

The Hayes rims are sold'

Ed aka #4

Definitely keep in touch Chuck ! It would be great to meet up with you folks ! And yes, there’s a lot of good Model T type roads in “Uta-Ho” !

Looking forward to touring weather !

Back to the top, please.

I’ll sell the matching pair for $25 plus shipping

To the top…

NEW PRICE BTT

I haven’t seen the easiest solution mentioned yet. I remove the spare tire on my ‘26 roadster. Only takes a minute. That gives you much better access to the battery and you can easily lift it with a strap.

Yes. Mr. Roadster. Thanks.

More photos

With the firewall and rear mounting frame in place, use stiff cardboard to make a pattern that fits the two components. That will give you the shape you need to cut in the steel sheet. Custom made for a custom fitment. No need to follow a plan .

Allan from down under.

Randall do you still have this hempy? Id love to get measurements from the cam blanks mine are missing

Bump to the top

Sold pending, Thank You all!

Ok thanks!

Anyone had trouble with 3095 plugs leaking compression at the top metal crimp where it contacts the porcelain on the OD?

Yes ,compression and unburned fuel , that is why I quit using them. The 1's made in the USA didn't do this, but the last set i bought were mexico made and they leaked between the porcelain and metal. I found some nos AC spark...

I like it, how soon can I get it delivered? :lol:
I like the longer hood though,maybe with that 6 cylinder experimental engine in it :D

Thanks Dan

Thanks Russ.

Frontyboy,

I can not give you a quick answer because what I think you are building is around 10% (guess here) of the speedsters built.
That makes getting information harder.
I don't know what is in your head so I can only give you areas to look and maybe something will stick.

Most I have seen use a setup like a '15-'16 firewall to cowl...

How about brass plating some steel bowls?

I will be attending again this year. I recommend this swap meet. I see potential for it growing each year. I did very well last year. Both buying and selling. For the first year to have the prewar added to the existing swap meet, I think it went very well. Kevin and his crew did great. As to the set up dates and time. It is a Thursday Friday...

Very nice!

2-ear knockoffs like this? Someone made these some years ago. Fit Buffalo and House #3, Model T size. Just 2 pieces, one right, one left. Chrome plated. Threads are sharp and snug, not wallowed out like many originals. Appear to have been used, but barely. There were more made, so maybe someone else will have another pair available. / Tim

Back to the top.

Back to the top

The meter is not original!

Move back to the top

Yep, I think I have attended or vended every year so far.

Good people, good vendors, good food and a great location...what's not to like? It's my favorite.

If you are on the fence about attending, I encourage you to.

Howard

Still for sale

Still for sale

Still for sale

Bumping again, but also an update. So far I barely have enough round brush interests to do a run of 16 for that price break, I'll actually end up keeping a couple in stock JTS, but long afterward that price will go up.

Also, ATM I only have 2 of the necessary 12 rectangular brushes ordered, again I will self-stock some, but it's quite an...

It is marked V-S, not V-8. Looks like a period copy of the Stevens tool.

Metallurgy may differ. Plates that have been bent and straightened will be somewhat hardened, which may affect their magnetic behavior. Soft steels magnetize easily, but will not hold magnetism well. Harder steels and steel alloys will hold magnetism. Field pieces uses in association with permanent magnets are usually very soft steel.

I would be interested in some covers. Will you do one for Carbide generators as well?

I sent you replys to your email we talked in dec but I have not heard back.

Thanks Dan, no didn't receive it. My phone # is in that email, maybe we can talk on the phone later today.

I’ll take it Don. Can you charge it to my card you guys have on file? Mark Eyre. Hope all is well with you and your family.

E mail sent. Les Sumner