MTFCA Forum

I have a perfectly good left side housing for sale. It needs to have a left tube stub installed into it. You could probably send it out to Chaffins and have them do that for you. $100 plus shipping. Located in Mays Landing, NJ. Best to text me at (609) 289-0677 . I can send you pictures of it that way.

Hypothetical.......

Model T Fords are to be identified by the motor engine number. The early Ford manuals suggest that when a new block or motor is place in a car whose motor needs to be replaced, the mechanic use stencils to place the old motor number on the new motor block....

So, should a 1927 roadster be reconstructed, whose title and older...

Here’s a few pics of a 13 Speedster at the Savoy Auto Museum. I’ve seen the Rajo head a few times. Has anyone run a T with a Rajo head? What kind of performance differences are associated once one is installed? Curious about the specs of the impact it has.

Darin

The wheel gears will not load to this site for some reason but can email them to you

It seems like most Model Ts have been upgraded over the almost over 100 years since 1908 and 1927. Certainly engine numbers showing blocks that have been added or upgraded and made by Ford up until 1941 are not an indicator.

What does define a year?

Original speedometer drive with gears and extra chain links
$300 plus shipping
L.Lapatka
Text: 423.237.8846
Email: ltlapatka@gmail.com

So are any of the years/models that are better as a driver. I would think with improvements the 26/27 may be the best but many say they are slower.

Is Kevin still making Buffalo wire wheels?

I am looking for a Tirometer .It had a glass top on it so you could read the air pressure. Maybe someone has one lying around! s-l1600.jpg s-l160002.jpg

Still searching for top irons or top for 25 Roadster.....anybody have any laying around?

Where can I find the list of Model T parts suppliers that used to be on the website?

1 clear and 1 red lens for oil lights. Has metal edge.$25.00 plus $12. priority mail. Personal check with hold. NO PAYPAL.
Bob Giles
divco100b@icloud.com

Stewart speedometer. Shaft turns but is stiff. I’m sure it will need to be gone through. The bezel has one small crack.

$50 plus shipping in the U.S.

E74ABA3A-5801-45FC-9889-63E3ACBE5131.jpeg

6DC1A707-498D-43DD-836F-D9BDD6BEA11D.jpeg

B1C8A5FD-1B50-44F5-AFCC-CE5FB8C4A1D7.jpeg

D1DEE83C-B2B8-4C5D-A61E-AB2BE892B626.jpeg...

I see Lang's has a 6v and 12v alternator for the same price. I have no problem keeping my 24 Coupe 6v but is their and pros to going to a 12v alternator? Would it cause problems with the buzz coils? I have a feeling it would.

I have a cracked Drivers side window and need to replace both windshields. I have a 1924 Coup. How or where.. do i go to get this glass?

Is this normal when running both?

For Sale 1910 Kingston 5 Ball Carburetor. Excellent Shape $1500.00. Call John 352-256-7234.

Completely disassembled and cleaned, new float, needle and seat, venturi, choke spring, spray needle and bushing for nice original throttle shaft. No cracks or splits in original brass bowl, nice original hardware and new old stock screws for the Pats Pending mixing chamber cover. Test run. $325 postpaid to continental USA email: wlkma9@gmail.com

I am looking to purchase as quickly as possible a pair of good used brake rods for my 1924 Touring. Must have good threads that will chase well and no wallowed-out holes in the end where it attaches to the brake cam lever. Thank You

Daniel Snell
Danielsnell2@twc.com

Here is a nice looking set of 3 Wards Riverside spark plugs.

$30 plus shipping in the U.S.

C90D2F32-B90D-4F19-88E1-A2A9500D43F0.jpeg

CAAA7CC7-0226-43C5-ABF9-3E7C45CD1D7D.jpeg

64793947-9DE3-49C7-9247-CF614EB653F6.jpeg

874AE4DE-BF4B-4245-ACCC-64066D139CFA.jpeg

Wondering if there is a general consensus regarding tire wear by mileage?
I have a 26 Tudor that is due for a new set of tires.
These are 21” Universal brand. I do not have a speedometer so the mileage on this set of tires is a geusstimation.
Anybody out there have a similar car with accurate mileage on a set of compatible tires?

Dave

What body style is on this T truck? Its really growing on me!

Good day all,
We are attempting to build our EFR (Early Ford Registry) forum viewership, and wish to invite everyone on our MTFCA site to visit. You may register as a guest and post comments or new threads. Anytime you have early brass T era or pre-T info, or questions, please check in over there as well as here.

I’ve noticed over the years...

The firewall that came with my stripped chassis is a reproduction and I am looking to buy an original firewall. I have no idea what these 2 holes are for on the passenger side. Can anyone tell me? 1925 Roadster.
s-l1600 (2).jpg

I have been working on the wheel rebuild and I got another front hub to replace one of the ones I had that had a spun bearing race. While bead blasting the new one and getting the races out, I noticed that the rough casting was about 1/10th of an inch off center. This made it tough to get to the back side of the race on one side and the rough...

FS: Genuine Stevens NY driveshaft bushing extractor. This tool quickly and easily removes the bushing from the front end of a Model T drive shaft tube. This tool was included in the Stevens driveshaft overhaul tool set. The tool consists of the guide plate, extractor and the extractor nut. This tool is in very good condition, ready for use. $300...

Excellent narrow neck pan just professionally straightened and ready to be installed. I had it restored and straightened and then decided to change to a 4 dip for access to the forth rod. Can send photos of inside and out.

$250 plus shipping expenses, can possibly get it to Tulare for the swap meet.

frontyboy

2ho69191949(Text)

1909 Kingston 5 Ball Carburetor. This model was used up to June of 1910. Is complete but has no float. No visible cracks.
Asking $1500.

Suitable for 1908 NRS or early 1909 T. This lamp has the small blue jewel instead of the large lens on the later tail lights. Also the patent pending top. These lamps were used for only a very short time. Very nice condition, $500.00 plus shipping. Kdmks AT att.net.

I think I am going to stay with the stock cast iron head but does anyone make a cast iron high compression head for the T?

For sale is a 1911 Kingston coil box with the original metal top coils. These metal top coils were only used in 1911 and this is the only one of these units I’ve ever seen. As you can see from the pictures, it’s very complete and in excellent condition. $1200.00 postpaid to lower 48 states. kdmks AT att.net.

I was cleaning out things and found this. Thought someone may want to make a set. They are the cats meow when it comes to lifting a T.

09C61FB7-7425-47EE-A512-6DCCAD7B9E64.jpeg

I am looking for the needle in the haystack. Here is a picture of the upper windshield hinge screw and washer on a 1916 sedan. They are missing on the opposite side. I believe these were used on the 1915 and 1916 closed cars.

The washer reads: JOS. N. SMITH & CO.
PAT. DEC. 15, 1914.

If you can help, send me an email or personal message through...

wanted to buy in quantity. Model T ball caps for re-babbitting ... prefer to buy in larger quantities to help reduce shipping ... can pickup at Chickasha swap meet in March ...Gene French gfrench1953@hotmail.com or 970-581-2808

for sale ... reproduction quick bolt set for models A and T Ford main bearings ... these are made from grade 8 bolt stock and 1045 steel ...all US materials and manufactured by me , here in USA ... introductory price of $250 plus $15 postage in lower 48 states ,includes the 6 bolts , nuts and quick keepers for ends ... i will add photos this...

Here is a pre-1915 brass Holley G carburetor with the Patent Pending top cover plate. Came from an estate Model T parts collection. Looks like a good rebuildable core.

$75 plus shipping in the U.S.

1AD4E5A2-F2ED-4A31-ACFC-09BB69A99224.jpeg

3A101853-E50E-4B6F-B42D-413BA561DCFD.jpeg

54F93929-FDAF-4F4B-9C87-84AFE7E2DC01.jpeg...

FS: A Stevens NY T-80 Universal Joint Tongs. These tongs make installing a Model T rear axle in a car much easier because the mechanic can grab the male end of the universal joint and twist it to align with the square hole in the transmission output shaft. Stevens included a set of these tongs in its driveshaft overhaul tool kit. A very handy tool...

19-27 engine splash pans. Powder coated. Not perfect but presentable and functional. $75.00+$25.00 shipping. Check or money order. Email me through this site. P1.jpg P2.jpg

Here is a nice pair of Improved Car front spindles. The threads are excellent. They have been cleaned, glass beaded, and have new bushings installed. The bushings have been properly line-reamed to fit the new spindle bolts. The oilers are not installed so you can make them face front when installed to your axle. New spindle arm bushings have also...

Standard Horn. Couple dents in the bottom, see picture. $75.00+$17.00 usps shipping. Check or money order. Email me through this site. H1.jpg H2.jpg H3.jpg H4.jpg

1915 Model T Touring car, possibly a rare “wide track” model originally sold in the Southern States. Car has a slightly wider wheelbase (~4 inches), which was originally designed for following cotton wagon ruts in the road. Uncommon, period correct suspension damper setup.

Engine and transmission were rebuilt (aluminum pistons, .270 cam, lifter,...

Small dent in the bottom and missing the rim and screen. $60.00+$17.00 usps shipping. Check or money order. Email me through this site. H1.jpg H2.jpg H3.jpg H4.jpg

Looking to get in touch with Rick Rodda, does anyone have an email address of his that they could PM me?
Thanks

Here is a great NOS, all original, STOP brake light assembly. It is in original with excellent paint and has never been used or mounted. Excellent lens, plated rim, mounted bracket, etc. It measures 4 1/4 diameter by 2 1/2 in depth. A really nice piece and a desirable accessory.

Price is 285.00 includes FedEx shipping and insurance within the...

Hi all,
I took my front springs apart and marked each one on the front. How important is it to replace the spring exactly as they were when all together? Would there be any benefit to put every other one backwards? Or, put the pack in the same order but all facing backwards as opposed to the original way? Thanks in advance.
John

I'm in need of a single contact, spring loaded plug - see photos. Glad to pay your price if dimensionally correct and threads not stripped out of the side hole - it's a 6-32 - the other side hole is to insert the wire and it tightens from the top.

I'm looking for an email for Wayne Atkinson of Idaho (as of 1996). More specifically, I am looking for him to see if he has a clearer copy of the 1996 January article he wrote for New Secrets Magazine . My only copy is blurry... It's the one about air flow in various T parts.

Looking for all 6 correct carriage bolts for my 1914 Touring, the ones from the bracket to firewall.
They have a high dome heads.
They are 5/16.
The graph paper is 1/4.
The holes do lineup it was how I was holding with one hand and taking photo with other.
Brian
586 864 5110.

In more ways than one ! Looks like the rear seat in this 1913 touring is holding up well under stress !

During a recent outing, we came across a T touring sitting in a barn yard. The older owner has been ill for about three years. A club member bought the barn yard car. The family is selling the remainder of the collection. There are 3 cars left, commercial hack, 26 touring and a 21 roadster pick up with wood bed. All cars have been sitting in a dry...

looking for r&l rear fenders for my project,i know new ones are availble,maybe someone has good used or leftovers from a project

2 steel and 2 cast aluminum. $40.00 plus $12.00 priority mail. Personal check with hold. NO PAYPAL.
Bob Giles
Johnstown, Pa.

1926-7 Scandinavia trans bands. New in the box with rivets. $65.00+$15.00 shipping. Check or money order. Email me through this site. S1.jpg S2.jpg S3.jpg

I am looking for an exhaust cutout for an exhaust whistle on my 1922. I would prefer an original cast iron one in decent shape to go on a car.

Hello,
My 26 touring has been losing juice intermittently from the magneto. Sometimes it runs great on the mag and sometimes there is nothing. I am planning on taking the contact out and cleaning it well tomorrow. I reckon that I will also check the wire for any bare spots while I am at it. Just wanted to see if I should be looking at anything...

Jno Brown Model 560 tailight. $35.00 + $17.00 usps shipping. Check or money order. Email me through this site. bb1.jpg bb2.jpg bb3.jpg bb4.jpg

Jno Brown Model 540 Ford-O taillight. $45.00+$17.00 usps shipping. Check or money order. Email me through this site. b1.jpg b2.jpg b3.jpg b4.jpg

21-25 and 26-7 Front Frame Bearings. In good condition. $45.00 for the pair+$17.00 usps shipping. Check or money order. Email me through this site. C1.jpg C2.jpg C3.jpg

With regrets I have been selling part of my car collection. Sold 4 cars in the last month This is a 1927 Touring Great shape wire wheels One small tear in back seat I have not had time to use it. Remaining problem the seller started it right up nice, ran smooth drove it up on my trailer. it has the vaporizer carb I have not been smart enough to...

Excellent quality reproduction windshield stanchions. Never installed. $125.00+$20.00 shipping. Check or money order. Email me through this site. ST1.jpg St2.jpg St3.jpg St4.jpg

DEA6A516-818D-4DE1-A9BE-CD2B36232E4A.jpeg CBAA22E0-AEB4-4487-936C-FAB43225A5B3.jpeg B24EBEB2-45C6-4C27-A52D-DC7DBF614211.jpeg D96DA67C-4019-4D8F-91FD-A69D8ACC8B7B.jpeg

1926-27 Clutch Pedals. One rebuilt with a pressed in steel slow speed fitting. The second pedal has the slow speed fitting brazed in and needs finishing and a new shaft. $50.00 for both pedals+$22.00 shipping. Check or money order. Email me through this site. C1.jpg C2.jpg C3.jpg C4.jpg

I made a deal on one and payment is on the way. Thanks to the folks who offered me gears. They all looked good and I wish I needed them all.

I am just about to build my new wheels and while everything is apart I would like to fit a drive gear on the right front wheel. Towards that end, I am looking for a correct Stewart speedo drive gear for a...

1926-7 Ford Detachable Ear Transmission Bands. Bead blasted and painted. Excellent condition. $75.00+$22.00 shipping. Check or money order. Email me through this site. B4.jpg B5.jpg B6.jpg

Looking to buy an oil can & bracket for my model T.

1926-7 Ford Detachable Ear Transmission Bands. Bead blasted and painted. Excellent condition. $75.00+$22.00 shipping. Check or money order. Email me through this site. B1.jpg B2.jpg B3.jpg

My son has just moved from the Bay Area of California to near Lewiston Idaho. He has a Corvair Ultravan. This is a small camper built by Chevrolet Corvair. He says it has a 30' wheel base. Do you have anything which can haul a vehicle like that. It is in running condition so will not need to be winched. However it is about 900 miles and not sure...

Any chance there is someone that has a Watts clutch they don't want and would willing to part with?
Thanks.
Craig.

Model T High Boy Radiator for Sale, $100 Or Best Reasonable Offer.
Prefer Pick Up In Ct.

Here is a wood band set. It is a narrow band set, pre 25. Sorry no rivets, came in an estate sale. Don’t know who made, but not home made. $25.00 + shipping. Email me at address in pictures. Thanks Dan
7D15343D-E21A-491A-AA38-9E1C02C6A4E2.jpeg
65824DDA-9499-481D-ADFF-18612381C59A.jpeg
F352DF30-1FEE-484A-BA50-51D55E58762B.jpeg

When I installed Rocky Mountain brakes on my 14 Touring car I noticed the brake rods were very close to the running board truss rods. When I push on the brakes the two rods get so close together that they often rattle together quite loudly. I really don't want to bend the rods so I have been thinking about splitting a rubber hose and covering one...

Here are some 13/14 rear end housings. $185 a pair pickup only. Zip 35173. Email me at address in pictures. Thanks Dan
AB442FF6-F9B4-4237-A2E3-8D773E2E1E76.jpeg
8F8EFCE4-D409-49A4-96B5-77A6A7771F5C.jpeg

I received a new radiator for my T and installed it. I have only driven car since maybe 30 miles or so. Recently I was looking under the hood on left side and discovered the overflow tube broke loose and just hanging from the tank on top. Also the old radiator had a couple ears toward the top where a couple screws went though the shell to support...

This carburetor came from an estate collection of T parts so I have no knowledge of its condition. From what I can tell I think it’s a 1915 style. Has the December 1914 date on the cover plate. The throttle shaft is pretty loose in the bore in the body. The body could stand to have a bushing installed. Otherwise looks pretty complete.

$100 plus...

Here’s a photo of the entire Oklahoma fire dept. That’s what it says on the photo anyway. I don’t see a T in the Fire dept cars or trucks. Maybe they didn’t want one.

But there is one T in the photo. Maybe 2 ? Maybe the city wanted a better car? Interesting!

Nice side lamp, from what I can tell possibly 1916-1917. Not completely sure. No major dents. Glass is cracked.

$65 plus shipping in the U.S.

51CB5DDD-05EC-41BF-A849-8B91AA885CCC.jpeg

263C1033-AA27-4DE7-9B69-3C35850C3788.jpeg

18B2F804-5D7F-44B1-9553-A2A664838AB1.jpeg

3EC39390-5999-48F8-9662-55938C30A85B.jpeg

At the bottom of the page.

WHO IS ONLINE
Users browsing this forum: StevenS and 0 guests

For sale: 2 Ford JNO Brown Model 110 side lights. Black and brass $500 or best offer plus shipping
the last picture has some reflected stuff sitting nearby
20220709_170228.jpg 20220709_165803.jpg 20220709_170017.jpg 20220709_165819.jpg 20220709_165849.jpg

Nice 1914 Nonpareil brass horn. Has several normal small dings but no major dents. The rim is mangled and cracked in one place. $150 plus shipping in the U.S.

3A6A9343-8A84-42C8-B01E-658141F568BB.jpeg

E2F9DDD7-74EC-4028-82B6-0992B2BD3E3D.jpeg

A683227C-EE28-4071-AF58-BE626FE30A02.jpeg

26D46450-0E65-46F5-844A-D1C998FC473D.jpeg

I am working on my 24 Touring and having done a rebuild on engine with a neoprene crank seal, I still see a drip under the front of engine. So I thought to add an additional external seal and want to know if anyone else has done this using an aluminum belt pulley and your technique in doing this. Your thoughts are appreciated!

Here is a set of new valve washers. $6.00 + shipping. Email me at address in pictures. Thanks Dan
50263938-E41F-4362-B1CF-48A30226E756.jpeg
C4A8BA96-8F67-4629-BC2A-6BE8FC29AF47.jpeg
A5AF0471-2820-48AA-BE00-B2BA5A1849E0.jpeg

For Sale: 10 tooth pinion gear . great condition, marked Ford . May be NOS. $150., includes shipping in US only. call (248) 894-75fiveone. Thanks, Walt

20230126_142751.jpg Bought this 25 Coupe today. Going to need some engine work. Engine was good running good for last owner but broke a couple magnets. I'm assuming the field coil is going to be a mess. Previous owner removed the rest of the magnets. He bought a set of splash angles but decided not to finish the project. Debating whether I should...

Here is a valve Lapper. See pictures. $15.00 + shipping. Email me at address in pictures. Thanks Dan
9DBF24C2-363E-4CD0-9D21-2A0BE77493CA.jpeg
F4068FB0-F284-433D-8BB8-38F9B69915F2.jpeg
A3E6861B-7EA4-4059-B64C-55DE59018CD7.jpeg

I got two early NON Starter Transmissions FS. You know what I know. They are all there. I put a tape on magnets look to be 3/4”. $100 EACH PICKUP HERE. Email me at address in pictures. Thanks Dan
73342502-B788-45BF-923C-5B1A4749A84E.jpeg
8256C0A9-F481-4E1C-894D-5FD674D008AC.jpeg
18F9D9A3-FF4F-4742-B9B4-E9E04F3EBD92.jpeg...

I have added a link to Darren's car in our Video Link section of the gallery:

Also added is a link to a simple tear down of a T engine and Transmission designed for the layman to explain how it works.

We don't have copies of the videos on our site, rather these are links to Youtube or other sites where you can actually watch the action.

The...

I still have some Ford Script keys.
I have all numbers except number 55, while supply last.
$8 ea. includes shipping in lower 48.

Please pm.

Thanks, fordrelic