MTFCA Forum - Active topics

Active topics

Go to advanced search

Search found 165 matches

Topics

Replies

Views

Last post

I need some advice here.

Last post by NoelChico « Fri Jan 16, 2026 11:17 pm
Posted in General Discussion Forum
Replies: 5
by Darren J » Fri Jan 16, 2026 6:26 pm » in General Discussion Forum

First post

I'm new to the model T game so I'm just learning. What I'm learning so far is that this is a very expensive hobby! Ouch, anyway I have a 1926 Coupe with wood spokes. I just realized my spokes are loose. I'm finding different size tenon holes and lengths via the vendors. Is there a way to determine which ones I currently have so I can order spokes...

Last post

You can find wire wheels for 26-27 fairly easily. BUT you will need different front and rear hubs which aren’t cheap. I did it but would consider new wood spokes if I did it again. A lot depends on if you like the appearance of wood vs wire spokes.

5 Replies

152 Views

Last post by NoelChico
Fri Jan 16, 2026 11:17 pm
FOUND... THANK YOU. WTB - Pair 1913-14 E&J Black & Brass Side Lights

Last post by mklooksup « Fri Jan 16, 2026 11:14 pm
Posted in Classifieds - Parts
Replies: 3
by 26Tpickup » Sat Jan 27, 2024 10:32 pm » in Classifieds - Parts

First post

I just picked up a new 1914 Speedster. But someone removed the Side Lights. I'm hoping for a nice pair and brackets. Call/text me pictures and asking price to (210) 748-84 niner one; or email me...
Thanks,
Jerry

Last post

Rick, are these still available?

Manny

3 Replies

683 Views

Last post by mklooksup
Fri Jan 16, 2026 11:14 pm
Have I ever said I hate nightmares??

Last post by frontyboy « Fri Jan 16, 2026 11:10 pm
Posted in General Discussion Forum
Replies: 26
by Daisy Mae » Tue Jan 13, 2026 11:27 am » in General Discussion Forum

First post

I generally don't recall my dreams, but this morning I woke up like I'd been poked with a cattle prod!
I had recently rebuilt my rear axle. Through all the various test fits setting thrust bearings and gear lash, while I had torqued down the pinion gear, I had left it unpinned intending to do it with final fitment. Generally, I'm always very anal...

Last post

This is a heredity thing between family members. Between my nephew and me he being 20 years younger than me, we both seem to wake up within 20 mins of each other to drain the radiator. Usually plus or minus 3 am.

The worst part is back in bed the mind turns on and problems or questions began filtering through the mind not allowing a quick return...

26 Replies

668 Views

Last post by frontyboy
Fri Jan 16, 2026 11:10 pm
NOS 5 to 1 Steering sun gears FS

Last post by MAG « Fri Jan 16, 2026 10:30 pm
Posted in Classifieds - Parts
Replies: 2
by Dan Hatch » Fri Jan 16, 2026 7:17 pm » in Classifieds - Parts

First post

Have some NOS 5 to 1 Steering pinions sun gears. T-3519B. $35 for a set + shipping. See pictures. Email me by forum. Thanks Dan.
IMG_5279.jpeg
IMG_5280.jpeg

Last post

Email sent

2 Replies

103 Views

Last post by MAG
Fri Jan 16, 2026 10:30 pm
NOS Steering Gears FS

Last post by Gleaner « Fri Jan 16, 2026 9:38 pm
Posted in Classifieds - Parts
Replies: 3
by Dan Hatch » Fri Jan 16, 2026 7:05 pm » in Classifieds - Parts

First post

Set of steering gear sets. 5 to 1 set. Pinion gear and 3 sun gears.
Came out of Ford dealership in the 1960’s. Have 2 sets. $65 each + shipping. See pictures. Email me by forum. Thanks Dan
IMG_5282.jpeg

Last post

Email sent

3 Replies

126 Views

Last post by Gleaner
Fri Jan 16, 2026 9:38 pm
Need a bigger carburetor?

Last post by 1925 Touring « Fri Jan 16, 2026 9:24 pm
Posted in General Discussion Forum

by 1925 Touring » Fri Jan 16, 2026 9:24 pm » in General Discussion Forum

I took this picture at work about a year ago. It's a little humerous to compare parts from my T to other things sometimes. For some reason I took my carb to work one day to mess with after hours. On the table was a different carburetor, a carburetor for a T-28, or more specifically an R-1820-86b.
I didn't take the cover off, not at a rebuild...

0 Replies

51 Views

Last post by 1925 Touring
Fri Jan 16, 2026 9:24 pm
HCCT

Last post by TXGOAT2 « Fri Jan 16, 2026 9:18 pm
Posted in General Discussion Forum
Replies: 2
by Moxie26 » Fri Jan 16, 2026 8:02 pm » in General Discussion Forum

First post

What is the correct flywheel rpm when testing ?

Last post

About twice the speed of an ordinary phonograph record.

2 Replies

46 Views

Last post by TXGOAT2
Fri Jan 16, 2026 9:18 pm
Open Valve Engine Oil Leaks - Problem Solved!

Last post by Wayne Sheldon « Fri Jan 16, 2026 8:44 pm
Posted in General Discussion Forum
Replies: 10
by Russ_Furstnow » Thu Jan 15, 2026 5:31 pm » in General Discussion Forum

First post

My 1909 Touring has a nasty habit of leaking oil all over the engine bay and undercarriage from the open valve train. Not only is the oil unsightly, but the oil is a pain to clean after just a short drive. To solve the problem, I made a leather valve cover that straps to the engine and the problem is now taken care of!! The leather cover has two...

Last post

Russ,

I noticed that your 1909 has a factory water pump which must mean it’s a 2 pedal, 2 lever. Would you mind sharing the engine number?

Thanks,
Rod

Sorry Rod, and clarification for others.
In rough round numbers. Roughly the first one thousand ( 1000 ) model Ts manufactured in late calendar 1908 and very early (January and February)...

10 Replies

518 Views

Last post by Wayne Sheldon
Fri Jan 16, 2026 8:44 pm
NOS 4 to 1 Steering Pinions FS

Last post by Charlie_26_TT_Ccab « Fri Jan 16, 2026 7:37 pm
Posted in Classifieds - Parts
Replies: 1
by Dan Hatch » Fri Jan 16, 2026 7:12 pm » in Classifieds - Parts

First post

Here are a couple NOS 4 to 1 Steering pinions. Came out of Ford dealership in the 1960’s. See pictures. $35 each + shipping. Email me by forum. Thanks Dan
IMG_5285.jpeg
IMG_5286.jpeg

Last post

Email sent

1 Replies

74 Views

Last post by Charlie_26_TT_Ccab
Fri Jan 16, 2026 7:37 pm
Connecting Rod clamp bolts FS

Last post by Dan Hatch « Fri Jan 16, 2026 7:01 pm
Posted in Classifieds - Parts

by Dan Hatch » Fri Jan 16, 2026 7:01 pm » in Classifieds - Parts

Here are some used sets of connecting rod bolts. Set of four $10 + shipping. Have several sets. See pictures. Email me by forum. Thanks Dan
IMG_5276.jpeg

0 Replies

61 Views

Last post by Dan Hatch
Fri Jan 16, 2026 7:01 pm
HCCT

Last post by Moxie26 « Fri Jan 16, 2026 6:24 pm
Posted in Classifieds - Parts

by Moxie26 » Fri Jan 16, 2026 6:24 pm » in Classifieds - Parts

What is the proper turning speed when testing coils?

0 Replies

57 Views

Last post by Moxie26
Fri Jan 16, 2026 6:24 pm
For Sale: Model A Marvel Schebler Carburetor

Last post by GGZ « Fri Jan 16, 2026 5:56 pm
Posted in Classifieds - Parts
Replies: 5
by GGZ » Tue Dec 16, 2025 6:14 pm » in Classifieds - Parts

First post

A good Model A Marvel Schebler carburetor. These are great for Model As and can be adapted to Ts as well. Everything is there with no wear. Price is 100.00 including shipping via FedEx Ground in the USA. I do not check messages here so call me at 734-730-4274 or email directly at motoringicons@hotmail.com Thanks

Last post

Still for sale

5 Replies

468 Views

Last post by GGZ
Fri Jan 16, 2026 5:56 pm
FS: Excellent E&J Black/Brass Taillamp

Last post by George House « Fri Jan 16, 2026 5:42 pm
Posted in Classifieds - Parts
Replies: 2
by George House » Fri Jan 09, 2026 4:55 pm » in Classifieds - Parts

First post

Pat’ Dec 9, 1908…Original paint and perfect condition. Complete. No cracks in glass or brass. Believe for 1913-1914 Ford. Only $160 + shipping.
gwhouse731(at)gmail(dot)com. First caller gets it

Last post

**final price reduction**

2 Replies

292 Views

Last post by George House
Fri Jan 16, 2026 5:42 pm
FS: Large 3 Tier Black/Brass Cowl Lamp

Last post by George House « Fri Jan 16, 2026 5:39 pm
Posted in Classifieds - Parts
Replies: 2
by George House » Fri Jan 09, 2026 4:46 pm » in Classifieds - Parts

First post

No name. Beautiful brass & glass. No cracks or dents. Has burner. Entire chimney nickel plated brass as is entire font
Beautiful multifaceted glass in rear. Only $ 90 + the ride.
gwhouse731(at)gmail(dot)com

Last post

** final price reduction**

2 Replies

242 Views

Last post by George House
Fri Jan 16, 2026 5:39 pm
FS: Early Front Spring Clip/ Motor Mount

Last post by George House « Fri Jan 16, 2026 5:37 pm
Posted in Classifieds - Parts
Replies: 2
by George House » Sun Jan 11, 2026 4:30 pm » in Classifieds - Parts

First post

Only $60 + USPS flat rate small. Another sandblasted recently sold here for $100. All threads used tap or dies already and in good condition.
gwhouse731(at)gmail(dot)com

Last post

**only btt this ad until it falls into obscurity**

2 Replies

228 Views

Last post by George House
Fri Jan 16, 2026 5:37 pm
OT - Adventures of Kalamity Dick - Fact or Fiction?

Last post by TXGOAT2 « Fri Jan 16, 2026 4:37 pm
Posted in OT - Off topic
Replies: 4209
by Rich Eagle » Thu Jan 10, 2019 2:20 pm » in OT - Off topic
1

…

39

40

41

42

43
First post

DickCvr6mby.jpg

“Many claim Kalamity Dick was a fictitious character made up to frighten children from playing with mechanical objects. However, pictures of this mysterious fellow surface from time to time. Was he real?
As I heard it he was an itinerant tinkerer who traveled in his Raceabout from town to town throughout the West repairing old...

Last post

Without question, the man was a multi-talented genius. The world needs more of his sort.
4209 Replies

2723373 Views

Last post by TXGOAT2
Fri Jan 16, 2026 4:37 pm
Fairbanks HCCT

Last post by TFan « Fri Jan 16, 2026 4:12 pm
Posted in Classifieds - Parts
Replies: 1
by KWTownsend » Fri Jan 16, 2026 11:57 am » in Classifieds - Parts

First post

For Sale: Early Fairbanks Hand Cranked Coil Tester in original unrestored condition. The magnets have been recharged, the meter was recalibrated by Bob Cascisa, and the meter mounting point shows a repair. This HCCT works perfectly! It is very heavy and awkward to move, so handles were fabricated and attached to the cast iron base to facilitate...

Last post

Looks to be set up for a flat belt so it can be motorized, Sweet! Jim

1 Replies

184 Views

Last post by TFan
Fri Jan 16, 2026 4:12 pm
Simmons carb FS

Last post by Dan Hatch « Fri Jan 16, 2026 3:43 pm
Posted in Classifieds - Parts

by Dan Hatch » Fri Jan 16, 2026 3:43 pm » in Classifieds - Parts

Here is a Simmons carb I don’t need. Looks good, but is missing the flap and drain screw. Look at pictures. $60 + shipping. Email me by forum. Thanks Dan
IMG_5289.jpeg
IMG_5290.jpeg
IMG_5291.jpeg

0 Replies

74 Views

Last post by Dan Hatch
Fri Jan 16, 2026 3:43 pm
Another generator question - A new one on me!

Last post by jab35 « Fri Jan 16, 2026 3:04 pm
Posted in General Discussion Forum
Replies: 24
by Marshall V. Daut » Mon Jan 12, 2026 4:28 pm » in General Discussion Forum

First post

After finally getting the engine to run in a friend's newly-purchased '26 T, it was noted that the ammeter did not register a charge even when the engine was revved up. The ammeter was wired backwards (of course!), showing a charge when the lights were tested. Once the ammeter wires were corrected, turning on the headlights gave a discharge on the...

Last post

Marshall: Connecting with Ron P is always helpful for electrical systems advice. He has helped me tremendously over the years and I'm grateful for his assistance and advice.

I encourage you to pursue brush plate insulator replacement if you are game, your fortune says you are! I did this successfully a few years ago with Ron's guidance along with...

24 Replies

608 Views

Last post by jab35
Fri Jan 16, 2026 3:04 pm
ECCT -vs- Strobo-Spark

Last post by Art M « Fri Jan 16, 2026 2:46 pm
Posted in General Discussion Forum
Replies: 9
by KWTownsend » Thu Jan 15, 2026 3:34 pm » in General Discussion Forum

First post

For half a century, members of the Rose City Model T Club have had access to Hand Cranked Coil Testers (HCCT) to tune up Model T coils. Nearly two decades ago, the club invested in a Strobo-Spark and it was a game changer. Today, the Electronically Cranked Coil Tester (ECCT) is available, which tests coils using dwell instead of amperage.

The...

Last post

I have recommended several times that if you don't have money to buy an ECCT, at least buy a capacitor tester. They are available on the internet for about $20. With this, you will least know when a capacitor is defective. All except one of my 20 coils needed a new capacitor.

Art Mirtes

9 Replies

348 Views

Last post by Art M
Fri Jan 16, 2026 2:46 pm
3D Model T transmission project - help needed

Last post by accuratemodelmaker « Fri Jan 16, 2026 12:08 pm
Posted in General Discussion Forum
Replies: 16
by accuratemodelmaker » Thu Jan 15, 2026 1:07 pm » in General Discussion Forum

First post

Hello everyone,

After being away for several years, I have decided to renew my membership and return to this forum with what will hopefully be received as a interesting project, worthy of members help.

Years ago I started a plan drawing of the Model T transmission, mostly because I wanted to know how such a simplistic mechanical device actually...

Last post

I have the general plans from the Henry Ford archives, but did not know there were more detailed plans available from Ford. May I contact you privately to ask who you spoke with at Ford for such info? Not sure I can afford the usage fees right now, but worth checking into. In the meantime, I will just measure actual parts as they become...

16 Replies

419 Views

Last post by accuratemodelmaker
Fri Jan 16, 2026 12:08 pm
FS cowl gas tank

Last post by Karl Von Neumann « Fri Jan 16, 2026 11:45 am
Posted in Classifieds - Parts
Replies: 6
by Karl Von Neumann » Thu Dec 11, 2025 9:24 am » in Classifieds - Parts

First post

Cowl gas tank does not leak solder has been touched up round the outlet. Over flow tube is broken off at the outlet Decent looking usable tank $200 plus the ride or local pick up pleasant prairie wisconsin can sell you the straps for an additional 50$

Last post

Isn't the four door closed car tank on the 26-27 under the seat?

Yes! I was just thinking about that the 4 door is under the seat thebrest are cowl mount

6 Replies

606 Views

Last post by Karl Von Neumann
Fri Jan 16, 2026 11:45 am
FS - Early Firewall Bracket Set $100 + shipping

Last post by John_Aldrich « Fri Jan 16, 2026 11:39 am
Posted in Classifieds - Parts
Replies: 2
by Dennis Fleming » Thu Jun 26, 2025 5:34 pm » in Classifieds - Parts

First post

Nice set of firewall brackets.
$100 plus Shipping for the set.
Thank you IMG_2187.jpeg IMG_2188.jpeg

Last post

What year will they fit?

2 Replies

1051 Views

Last post by John_Aldrich
Fri Jan 16, 2026 11:39 am
5 Ball Float and Seat

Last post by RGould1910 « Fri Jan 16, 2026 11:26 am
Posted in General Discussion Forum
Replies: 9
by Rod » Thu Jan 15, 2026 2:37 pm » in General Discussion Forum

First post

Since the passing of Stan and Russ does anyone have a source of valve seats and floats for the Kingston 5 Ball Carb?

The Stan Howe setup work great. The float is from a Harley Davidson.

The 1909 float and seat aren’t original. The problem is the seat is some sort of plastic ball and it hangs up.

Any source would be greatly appreciated....

Last post

I've made new floats for both 5 ball carbs and others using the closed cell material from Lang's without coating them. No issues to report after years of driving. I haven't had a leaking problem but still install a fuel shut off in line just in case. They're pretty easy to make on a lathe if you have a pattern.
20251119_181400.jpg

9 Replies

271 Views

Last post by RGould1910
Fri Jan 16, 2026 11:26 am
WTB…..Rare Hubcap

Last post by TRDxB2 « Fri Jan 16, 2026 11:01 am
Posted in Classifieds - Parts
Replies: 5
by WorldChamp1914 » Fri Jan 02, 2026 12:53 am » in Classifieds - Parts

First post

IMG_7249.png

Last post

IMG_7249.png

Looks like NWVS (North West Vintage Speedsters) is your lead
They are also called PG&E or PGE wheels

128062.jpg
128064.jpg
128063.jpg
--
Lugs or them
128066.jpg

5 Replies

778 Views

Last post by TRDxB2
Fri Jan 16, 2026 11:01 am
FS - 2 REPRO HUBCAPS

Last post by brassford « Fri Jan 16, 2026 10:41 am
Posted in Classifieds - Parts
Replies: 7
by brassford » Tue Nov 18, 2025 3:07 pm » in Classifieds - Parts

First post

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other. $60 SHIPPING INCLUDED

Enjoy Your Day!

Last post

$60 including shipping

7 Replies

1008 Views

Last post by brassford
Fri Jan 16, 2026 10:41 am
Spot light

Last post by jawa « Fri Jan 16, 2026 6:22 am
Posted in Classifieds - Parts
Replies: 1
by jawa » Mon Jan 12, 2026 8:40 pm » in Classifieds - Parts

First post

The overall height is 14 , 11 diameter and the lens needed looks to be about 9 1/4 . Would work great on a T fire truck. $175 plus shipping.

Last post

BTT new price

1 Replies

272 Views

Last post by jawa
Fri Jan 16, 2026 6:22 am
Battery tops NOS. FS reduced

Last post by Dan Hatch « Fri Jan 16, 2026 3:37 am
Posted in Classifieds - Parts
Replies: 5
by Dan Hatch » Sat Jan 10, 2026 2:38 pm » in Classifieds - Parts

First post

Here are a pair of NOS Battery cell tops for the 1925 Rubber case Ford battery. They don’t say Ford on the but came extra with my NOS Ford battery. Taken out of a Ford dealership in the 1960. $20 for the pair + shipping. Email me by forum. Dan
IMG_5149.jpeg

IMG_5150.jpeg
IMG_5151.jpeg

Last post

Back to the top

5 Replies

669 Views

Last post by Dan Hatch
Fri Jan 16, 2026 3:37 am
Stevens Tool T-50 info wanted

Last post by Tbird « Thu Jan 15, 2026 11:12 pm
Posted in General Discussion Forum
Replies: 6
by Tbird » Wed Jan 14, 2026 11:33 am » in General Discussion Forum

First post

I recently saw the post about the frame riveting tool that sold on eBay and was curious if anyone has any information about the Stevens T-50 tool? It seems like a very helpful tool for our hobby. There was a picture of it from what looked like it came out of a catalog but most of the text was cut off and couldn't read the whole thing. I would also...

Last post

Drawing up a pair
image.png

6 Replies

350 Views

Last post by Tbird
Thu Jan 15, 2026 11:12 pm
FF early parts

Last post by KimDobbins « Thu Jan 15, 2026 10:46 pm
Posted in Classifieds - Parts
Replies: 5
by KimDobbins » Thu Jan 15, 2026 1:35 pm » in Classifieds - Parts

First post

1 pair body to firewall brackets, $40. Rear fender
brackets, $35 per pair. Top iron to top socket brackets $30 each. Steering post brackets $150 each. Carb adjuster rods, 2 hole $125, 4 hole $225 each. All plus shipping. kdmks at att.net.

Last post

All parts are sold.

5 Replies

435 Views

Last post by KimDobbins
Thu Jan 15, 2026 10:46 pm
FS KR Wilson Trans. Head for Engine Stand SOLD

Last post by Pep C Strebeck « Thu Jan 15, 2026 10:19 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Thu Jan 15, 2026 9:25 pm » in Classifieds - Parts

First post

For Sale is an adapter that is made for a KR Wilson engine stand. It is made to hold a transmission and has the special threaded plug to mount it. I believe it is for a V8 Ford application but please check to be sure. SOLD plus shipping Lang’s 1-800-872-7871

Last post

BB-174, Transmission Adapter, BB Truck.

2 Replies

261 Views

Last post by Pep C Strebeck
Thu Jan 15, 2026 10:19 pm
Model T Music -- It's Back! (Opinions Welcome!)

Last post by TMiller6 « Thu Jan 15, 2026 9:39 pm
Posted in General Discussion Forum
Replies: 17
by ModelTMitch » Mon Mar 10, 2025 8:05 am » in General Discussion Forum

First post

The Internet is changing so rapidly, even I have to scramble to keep up sometimes!
Now that Flash Player is no longer supported by any mainstream browsers, I had to change a lot of the code for my website. What does this have to do with Model T's I hear you ask? Simple, I had to (temporarily) remove the music library from my website until I could...

Last post

Consider adding Cal Stewart’s 1919 Columbia recording of “Uncle Josh buys an automobile.”

17 Replies

4384 Views

Last post by TMiller6
Thu Jan 15, 2026 9:39 pm
FS Pair of 1pc spindles (1922 style) SOLD

Last post by Tparts « Thu Jan 15, 2026 9:13 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Thu Jan 15, 2026 9:00 pm » in Classifieds - Parts

First post

For Sale are a pair of one piece front axle spindles. These are the 1922-3 style. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Pending to Michael. Please call us in the morning.

2 Replies

169 Views

Last post by Tparts
Thu Jan 15, 2026 9:13 pm
Budd wire wheel questions

Last post by Kevin Pharis « Thu Jan 15, 2026 9:03 pm
Posted in General Discussion Forum
Replies: 5
by fordrelic » Wed Feb 19, 2025 9:44 am » in General Discussion Forum

First post

A friend is needing help mounting Budd wheels to model T.

Is there someone that he could call to get information he needs?

Thanks for the help.

Last post

Knock off wire wheel hubs are designed to support the wheel both at the inner flange, and over the hub nut. Almost all hubs are dramatically reduced in size in the center as they rely on the tapered axle to reinforce strength to the outboard end. I would be very skeptical of any original rear hub adapted to mount only from the inner flange.

Front...

5 Replies

950 Views

Last post by Kevin Pharis
Thu Jan 15, 2026 9:03 pm
FS 1917-25 Nice Steering Wheel $85.00

Last post by Tparts « Thu Jan 15, 2026 8:46 pm
Posted in Classifieds - Parts

by Tparts » Thu Jan 15, 2026 8:46 pm » in Classifieds - Parts

For sale is a very nice 1917-1925 Steering Wheel complete with spider. No cracks in rim. $85.00 Lang’s 1-800-872-7871

0 Replies

139 Views

Last post by Tparts
Thu Jan 15, 2026 8:46 pm
Information Wanted About Fastener Type

Last post by Mark Gregush « Thu Jan 15, 2026 8:20 pm
Posted in General Discussion Forum
Replies: 8
by ModelTWoods » Sat Jan 10, 2026 1:42 pm » in General Discussion Forum

First post

What is the proper name for the type of fastener that is commonly used with sheet metal screws in applications where a nut and bolt can't be used. they ware always made of spring steel and can be flat or slightly curved with different sizes for different size screws and applications, I loked at McMaster-Carr but didn't really know what to call...

Last post

D nuts and maybe not on a T but there were a number of them used on the Model A.

8 Replies

397 Views

Last post by Mark Gregush
Thu Jan 15, 2026 8:20 pm
FS Accessory Anti-Theft Device $75.00

Last post by Tparts « Thu Jan 15, 2026 8:10 pm
Posted in Classifieds - Parts
Replies: 3
by Tparts » Wed Jan 07, 2026 10:23 pm » in Classifieds - Parts

First post

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $75.00 plus shipping. Lang’s 1-800-872-7871

Last post

Down ten bucks

3 Replies

449 Views

Last post by Tparts
Thu Jan 15, 2026 8:10 pm
FS 1915 Touring Tail Light/Lic Plate BKT SOLD

Last post by Tparts « Thu Jan 15, 2026 8:07 pm
Posted in Classifieds - Parts
Replies: 5
by Tparts » Thu Jan 01, 2026 5:37 pm » in Classifieds - Parts

First post

For Sale is an original 1915-early 16 Tail Light, License Plate Bracket in good condition. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

Down another ten bucks

5 Replies

678 Views

Last post by Tparts
Thu Jan 15, 2026 8:07 pm
FS New All Gray 30 x 3 Non Skid Firestone Tire $125.00

Last post by Tparts « Thu Jan 15, 2026 8:04 pm
Posted in Classifieds - Parts
Replies: 7
by Tparts » Wed Dec 10, 2025 4:34 pm » in Classifieds - Parts

First post

FS Brand New Old Stock ( in the wrapper ) 30 X 3 Firestone Gray Non Skid Tire. Only one available. Originally sold for $320.00 each, but has not been available for over 10 years.
$125.00 plus shipping. Lang’s 1-800-872-7871

Last post

Another drop in price

7 Replies

751 Views

Last post by Tparts
Thu Jan 15, 2026 8:04 pm
FS “New Gray 30 X 3-1/2 Universal Rib Tire $100.00

Last post by Tparts « Thu Jan 15, 2026 7:57 pm
Posted in Classifieds - Parts
Replies: 7
by Tparts » Wed Dec 10, 2025 5:02 pm » in Classifieds - Parts

First post

FS Solid Gray 30 X 3-1/2 Universal Straight Rib Tire in the Black Plastic Wrapper. Only One Available. These haven’t been available for over 10 years. Originally $240.00 each $100.00 plus shipping. Lang’s 1-800-872-7871

Last post

Down again

7 Replies

801 Views

Last post by Tparts
Thu Jan 15, 2026 7:57 pm
October 1913 Motor Free delivery to Luray Swap Meet)!

Last post by Tparts « Thu Jan 15, 2026 7:53 pm
Posted in Classifieds - Parts
Replies: 6
by Tparts » Thu Apr 24, 2025 3:15 pm » in Classifieds - Parts

First post

For Sale October 1913 Motor. ( Please review photos for condition). $425 with Free delivery to Luray Swap Meet
Lang’s 1-800-872-7871

Last post

Still available

6 Replies

2497 Views

Last post by Tparts
Thu Jan 15, 2026 7:53 pm
FS Original Accessory Picnic Set in Case $175.00

Last post by Tparts « Thu Jan 15, 2026 7:49 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Mon Jan 12, 2026 9:12 pm » in Classifieds - Parts

First post

For Sale is an original “Icy Hot” Picnic Set with suitcase. There are 4 plates, knives, forks, and spoons. Unfortunately the Thermos is missing. $175.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

1 Replies

406 Views

Last post by Tparts
Thu Jan 15, 2026 7:49 pm
FS Accessory Fan Blade $20.00

Last post by Tparts « Thu Jan 15, 2026 7:40 pm
Posted in Classifieds - Parts
Replies: 8
by Tparts » Thu Jan 01, 2026 9:23 pm » in Classifieds - Parts

First post

For sale is an interesting accessory Fan Blade. Look carefully at the photos for condition as some blades are bent. Comes with a 26-27 extended fan hub. $20.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

8 Replies

826 Views

Last post by Tparts
Thu Jan 15, 2026 7:40 pm
Rear Hub Puller FS

Last post by Dan Hatch « Thu Jan 15, 2026 7:00 pm
Posted in Classifieds - Parts
Replies: 2
by Dan Hatch » Sat Jan 10, 2026 10:36 am » in Classifieds - Parts

First post

Here is an extra rear hub puller to me. I think it is for a TT. Measure the same as my Ford TT puller. Don’t see any markings on it. See pictures. $40 + shipping. Email me by the forum. Dan
IMG_5118.jpeg
IMG_5119.jpeg

Last post

Back to the top

2 Replies

359 Views

Last post by Dan Hatch
Thu Jan 15, 2026 7:00 pm
FS STEERING ARMS WITH SPEEDO HOLE

Last post by got10carz « Thu Jan 15, 2026 6:13 pm
Posted in Classifieds - Parts

by got10carz » Thu Jan 15, 2026 6:13 pm » in Classifieds - Parts

For Sale arms pictured. The ones marked $40 look good. The ones marked $30 need repair around tie rod hole. Steve 701 212 5009.

0 Replies

107 Views

Last post by got10carz
Thu Jan 15, 2026 6:13 pm
Original Main bearing bolts and nuts FS Lower Price !

Last post by Ruxstel24 « Thu Jan 15, 2026 5:45 pm
Posted in Classifieds - Parts
Replies: 2
by Ruxstel24 » Wed Jan 07, 2026 3:23 pm » in Classifieds - Parts

First post

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

Last post

TTT please

2 Replies

296 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:45 pm
Engine mount repair brackets FS

Last post by Ruxstel24 « Thu Jan 15, 2026 5:44 pm
Posted in Classifieds - Parts
Replies: 5
by Ruxstel24 » Wed Jan 07, 2026 1:06 pm » in Classifieds - Parts

First post

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

Last post

TTT please

5 Replies

350 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:44 pm
DUNN counterweights FS Lower price !

Last post by Ruxstel24 « Thu Jan 15, 2026 5:44 pm
Posted in Classifieds - Parts
Replies: 3
by Ruxstel24 » Mon Dec 29, 2025 9:34 am » in Classifieds - Parts

First post

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

Last post

TTT please

3 Replies

407 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:44 pm
Horn buttons FS Lower price ! :SOLD:

Last post by Ruxstel24 « Thu Jan 15, 2026 5:43 pm
Posted in Classifieds - Parts
Replies: 4
by Ruxstel24 » Fri Dec 26, 2025 12:52 pm » in Classifieds - Parts

First post

I have 3 column mount horn switches and brackets. $32ea including shipping to 48 USA
And one steering wheel nut switch (Canadian?)
$30 including shipping USA 48
Best way to contact me is call or text 33zero 3nine one nine zero 62

Last post

All buttons are sold to Bryce, thanks !

4 Replies

483 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:43 pm
History of the Holley Model S?

Last post by Original Smith « Thu Jan 15, 2026 5:13 pm
Posted in General Discussion Forum
Replies: 16
by NealW » Mon Dec 15, 2025 2:56 pm » in General Discussion Forum

First post

Last year I bought a very original early model year 1914 touring that has a late November 1913 engine. It has some transition parts like a two piece driveshaft and likely the original carburetor that was used for the 1913 model year, a Holley S. The car was in running condition when I got it, but for some reason, I really had a hard time getting...

Last post

I've not had good luck with Model S carbs, so I use a trusty NH.

16 Replies

887 Views

Last post by Original Smith
Thu Jan 15, 2026 5:13 pm
What is it?

Last post by Erik Johnson « Thu Jan 15, 2026 3:44 pm
Posted in General Discussion Forum
Replies: 11
by Tparts » Wed Jan 14, 2026 10:49 pm » in General Discussion Forum

First post

This is a heavy casting. It’s apparent where it goes, but what is it for?

Last post

Thinking outside of the box:

It's a tool for ease of removing and reinstalling the hogshead using your choice of hoist, gantry, cherry picker, rope, chain, etc. There is an eyelet or hook that bolts to the top of it.

The stub on the right is a handle. A stub is not required for the left side because you can use the pedals as a handle.

11 Replies

555 Views

Last post by Erik Johnson
Thu Jan 15, 2026 3:44 pm
FS High Hood Dash

Last post by JZSlenker « Thu Jan 15, 2026 2:10 pm
Posted in Classifieds - Parts
Replies: 1
by JZSlenker » Sun Jan 04, 2026 5:49 pm » in Classifieds - Parts

First post

Dash is in pretty good shape. Soaked in EvapoRust and then coated in light oil for shipment. Buyers pays actual shipping via PayPal. Make reasonable offer.

Last post

back to top

1 Replies

282 Views

Last post by JZSlenker
Thu Jan 15, 2026 2:10 pm
1912 Holley H1 carburetor

Last post by Corey Walker « Thu Jan 15, 2026 2:03 pm
Posted in Classifieds - Parts
Replies: 1
by Corey Walker » Sat Jan 10, 2026 1:59 pm » in Classifieds - Parts

First post

Completely disassembled and cleaned, new venturi, float, viton tipped needle and seat conversion, new spray needle with nice original knob, excellent throttle shaft with bushings installed, test run. There were a few cracks in the bowl I repaired. $575 postpaid to continental USA or $475 without the inlet elbow in case you have a carb already and...

Last post

Back to top.

1 Replies

344 Views

Last post by Corey Walker
Thu Jan 15, 2026 2:03 pm
FS 1911-12 “Ford” Transmission Door SOLD

Last post by Tparts « Thu Jan 15, 2026 1:47 pm
Posted in Classifieds - Parts
Replies: 2
by Tparts » Wed Jan 07, 2026 10:09 pm » in Classifieds - Parts

First post

For Sale is a very nice “Ford Script” Transmission Door for late 1911-1912 tapered transmission cover. It is in excellent condition with no pitting and a very crisp script. It has been glass beaded. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

2 Replies

419 Views

Last post by Tparts
Thu Jan 15, 2026 1:47 pm
MEME of the week

Last post by ironhorse « Thu Jan 15, 2026 1:21 pm
Posted in OT - Off topic
Replies: 83
by ironhorse » Tue Mar 11, 2025 9:26 am » in OT - Off topic

First post

Screenshot_7-3-2025_10813_www.google.com_.jpeg

Last post

p1957.JPG
Saw this in my pocket change reminded me of this song

83 Replies

29331 Views

Last post by ironhorse
Thu Jan 15, 2026 1:21 pm
Magneto

Last post by TXGOAT2 « Thu Jan 15, 2026 12:24 pm
Posted in General Discussion Forum
Replies: 31
by Oldrusty26 » Fri Jan 09, 2026 11:02 am » in General Discussion Forum

First post

Another question for the team, when recharging the magnets on a magneto in the car, do you have to touch each magnet individually or just at the mag post? i’m working on a 1925. I have the hogs head off to inspect the coil rings. Everything looks good but the mags are weak. I was planning on doing the flash charge with a DC welder.
Thank you

Last post

You can't repair the coil ring in the car, and taking it out is a major operation.

I'd drain the oil, pull the spark plugs, put an AC low-range voltmeter on it, and spin the crank for all I was worth. If the meter shows a few volts, the mag may work. Put the hogshead back on, plugs back in, 10W30 oil in, and start the car on BAT, then see if it...

31 Replies

984 Views

Last post by TXGOAT2
Thu Jan 15, 2026 12:24 pm
A very nicely appointed Model C

Last post by Jerry VanOoteghem « Thu Jan 15, 2026 11:50 am
Posted in Early Ford Forum - pre-T
Replies: 5
by Rob » Mon Jan 12, 2026 9:29 pm » in Early Ford Forum - pre-T

First post

Thank you Bill C. and Bill A. for this very nice photo of a 1905 side entrance Model C with lots of extras. C 3.tiff

In color:

IMG_2899.jpeg

Last post

I've seen this done on many sidelamps. Sometimes in period photos, and sometimes on lamps at swap meets. Not so much on restored cars.

5 Replies

187 Views

Last post by Jerry VanOoteghem
Thu Jan 15, 2026 11:50 am
Zoom Zoom

Last post by Rich P. Bingham « Thu Jan 15, 2026 11:15 am
Posted in General Discussion Forum
Replies: 29
by Dollisdad » Tue Jan 13, 2026 11:23 am » in General Discussion Forum

First post

IMG_4845.jpeg IMG_4846.jpeg IMG_4869.jpeg IMG_4820.jpeg

Last post

#7 a newish 1913 ? Difficult to see the distinguishing square doors, but the windshield and front fenders are ‘13 earmarks, right ?

#8 appears to be an ‘09 - license plate tells us the photo was taken in 1912. A “tourabout” sans windshield or top. Was it bought that way ?

29 Replies

892 Views

Last post by Rich P. Bingham
Thu Jan 15, 2026 11:15 am
WTB Improved Rad Shell

Last post by Ken Buhler « Thu Jan 15, 2026 10:36 am
Posted in Classifieds - Parts

by Ken Buhler » Thu Jan 15, 2026 10:36 am » in Classifieds - Parts

I'm hoping to find a mint condition tall Canadian nickle rad shell. Dan Hatch sold one a few years ago and if it didn't get used, please write to me.
Ken Buhler

0 Replies

117 Views

Last post by Ken Buhler
Thu Jan 15, 2026 10:36 am
FS NOS Champion X Spark Plugs (2)

Last post by Ken Buhler « Thu Jan 15, 2026 10:16 am
Posted in Classifieds - Parts
Replies: 1
by JZSlenker » Thu Jan 15, 2026 10:11 am » in Classifieds - Parts

First post

NOS Champion X Spark Plugs from the 1950s.
Make Offer
Pay by Paypal

Last post

Email sent

1 Replies

200 Views

Last post by Ken Buhler
Thu Jan 15, 2026 10:16 am
Girls with curls.

Last post by TXGOAT2 « Thu Jan 15, 2026 10:01 am
Posted in General Discussion Forum
Replies: 21
by Dollisdad » Sun Jan 04, 2026 12:12 am » in General Discussion Forum

First post

IMG_4714.jpeg IMG_4636.jpeg IMG_4713.jpeg IMG_4578.jpeg

Last post

The Ectoplasm must have been stronger in photo 3....

21 Replies

1234 Views

Last post by TXGOAT2
Thu Jan 15, 2026 10:01 am
Magneto help needed

Last post by browning « Thu Jan 15, 2026 9:59 am
Posted in General Discussion Forum
Replies: 2
by Oldrusty26 » Wed Jan 14, 2026 9:47 pm » in General Discussion Forum

First post

Is there anyone near Waterford pa that has experience with the model T magneto ? I’m having issues with mine not having much charge on the magnets , have done the in cr flash with 3 batteries and a dc welder to no avail .
Thank you !

Last post

Travis, I am just about an hour south of you and have assembled a working magneto/flywheel simulator that makes it possible to see and understand the construction and operation of the Model T system. You would be welcome to make a visit and we can discuss your situation at length if you would like. Email or PM me and we can discuss the...

2 Replies

147 Views

Last post by browning
Thu Jan 15, 2026 9:59 am
Follow up on no reverse

Last post by RGould1910 « Thu Jan 15, 2026 9:22 am
Posted in General Discussion Forum
Replies: 6
by Reno Speedster » Sun Jan 11, 2026 5:28 pm » in General Discussion Forum

First post

When I was putting the 22 into the garage for the winter, I couldn’t back it up my very low slope driveway. I had a bunch of things to do before I could get into it to find out what was up. I took the transmission cover off today and I can’t see anything wrong. The triple gears look fine, the drum shows no sign of heating or cracking, and what...

Last post

Pedal ramp issue, missing a chunk of band lining, loose band adjustment??? Maybe all three.

6 Replies

515 Views

Last post by RGould1910
Thu Jan 15, 2026 9:22 am
***SOLD***FOR SALE - 1911 / 1912 Engine

Last post by RGould1910 « Thu Jan 15, 2026 9:10 am
Posted in Classifieds - Parts
Replies: 16
by Lcjudge » Fri Jun 07, 2024 8:26 pm » in Classifieds - Parts

First post

If you've got an early T here's an engine for you. According to the T SN listing, this engine was in a car sold in Dec. 1911. There isn't a casting date on the engine (that I've found). The SN on it is 88211, So this was probably in a 1912 Model year car. However, it could have been in an 11 sold late. Here in Ky we didn't have a title law until...

Last post

The pan ears have 7 rivets. Tommy sent photos.

16 Replies

3548 Views

Last post by RGould1910
Thu Jan 15, 2026 9:10 am
Sale pending 1912 engine, transmission, magneto assembly complete

Last post by RGould1910 « Thu Jan 15, 2026 9:07 am
Posted in Classifieds - Parts
Replies: 2
by RGould1910 » Wed Jan 14, 2026 8:49 am » in Classifieds - Parts

First post

Early 1912 engine no. 88211, complete with correct parts including head, pan, tramsnmission cover, pedals, etc.
Purchased from my good friend Tommy Turner a few years back. I recently suffered a downturn putting an end to any major restorations. The assembly has never been removed from the heavy wooden crate used to send it to me. Here is a link...

Last post

The pan ears have 7 rivets from photos Tommy sent.

2 Replies

528 Views

Last post by RGould1910
Thu Jan 15, 2026 9:07 am
Found cut in pan, from inside out... Pull hogshead AND pan?

Last post by Wayne Sheldon « Thu Jan 15, 2026 7:08 am
Posted in General Discussion Forum
Replies: 28
by lewcombs@gmail.com » Fri Jan 09, 2026 10:44 pm » in General Discussion Forum

First post

I am new at this. I will get names of stuff wrong. Please be patient and try to interpret.

I was planning to change all fluids, greases, etc. in my 1923 touring car.
First thing was oil change, and I immediately saw the new oil spilling out.
Found a 1 long vertical cut in the outmost edge of the pan where it surrounds the flywheel.. drivers...

Last post

Over the years, I have seen a good number of model T engines taken from running cars that when taken apart revealed nuts, bolts, magnet keepers, or cotter pins happily hiding clinging to one of the magnets inside out of harm's way.
Given a couple years, countless starts and stops, potholes in the roads, and numerous other forces causing various...

28 Replies

1213 Views

Last post by Wayne Sheldon
Thu Jan 15, 2026 7:08 am
FordModelT.net new search function... Your thoughts?

Last post by ModelTMitch « Thu Jan 15, 2026 4:07 am
Posted in General Discussion Forum
Replies: 3
by ModelTMitch » Wed Jan 07, 2026 5:45 am » in General Discussion Forum

First post

Happy New Year everyone! :)

Many of you will be aware by now of my Model T site, of which I'm pleased to say, gets a lot of comments about how useful people have found it.

I recently implemented a brand new feature on my Model T site, which I hope will get lots of use, and save a great deal of time!

Introducing the built-in search engine,...

Last post

My Model T website is a hobby, not my full time job haha! ... I fiddle around with the code behind the scenes when I get time to :lol:

Yes, a great site and thanks. Don't know how you find all the time, patience and focus to do all this. I sure don't!! :lol:

3 Replies

378 Views

Last post by ModelTMitch
Thu Jan 15, 2026 4:07 am
Brass horn flex tube 1/2 " diameter

Last post by Grntea « Thu Jan 15, 2026 12:09 am
Posted in Classifieds - Parts
Replies: 1
by RichJ » Wed Jan 14, 2026 7:22 am » in Classifieds - Parts

First post

31 long new horn brass flex tube. 25.00 plus15.00 shipping.

Last post

Email sent

1 Replies

236 Views

Last post by Grntea
Thu Jan 15, 2026 12:09 am
19" accessory wire disc wheel lock ring F/S

Last post by Layden Butler « Wed Jan 14, 2026 11:19 pm
Posted in Classifieds - Parts

by Layden Butler » Wed Jan 14, 2026 11:19 pm » in Classifieds - Parts

Wire and disc wheel lock ring for non-Ford wheels, 19 rim size. nice ring not bent or rusty, suitable for plating. $99, packaging included, 48 state shipping $20. Contact me thru MTFCA messaging. I also have for sale one 18 , same price.
Measurements in pictures are inside and outside diameters.
Happy to answer any questions.

0 Replies

143 Views

Last post by Layden Butler
Wed Jan 14, 2026 11:19 pm
WTB Bosch plate dist and one 21” wire wheel

Last post by Dan McEachern « Wed Jan 14, 2026 10:23 pm
Posted in Classifieds - Parts
Replies: 6
by Noetall72 » Tue Jan 06, 2026 6:01 pm » in Classifieds - Parts

First post

I am looking for a Bosch plate distributor. I am also looking for a single wire wheel. I would like it to not be painted up all pretty but more of a rusty patina that can be used on a speedster, to hopefully go fast. Haha.
I am located in Indiana.
Thanks for your help.

Last post

Chaffins has new front plate distributors for sale. Just FYI

6 Replies

510 Views

Last post by Dan McEachern
Wed Jan 14, 2026 10:23 pm
Interesting video with a Model T - F1 Drivers Race 100 Years Of Cars

Last post by John E. Guitar « Wed Jan 14, 2026 10:14 pm
Posted in General Discussion Forum

by John E. Guitar » Wed Jan 14, 2026 10:14 pm » in General Discussion Forum

F1 Drivers Race 100 Years Of Cars

0 Replies

143 Views

Last post by John E. Guitar
Wed Jan 14, 2026 10:14 pm
Front spring gator

Last post by Kevin Pharis « Wed Jan 14, 2026 8:08 pm
Posted in General Discussion Forum
Replies: 6
by WorldChamp1914 » Mon Jan 12, 2026 12:37 am » in General Discussion Forum

First post

Hi…..I can’t find a picture of one online, I think that they were made of canvas.

Last post

Check out how the early Bentley guys “lace” their springs. Similar to a wrapped steering wheel

6 Replies

469 Views

Last post by Kevin Pharis
Wed Jan 14, 2026 8:08 pm
Model T Ford clubs of the World :)

Last post by ModelTMitch « Wed Jan 14, 2026 7:29 pm
Posted in General Discussion Forum
Replies: 9
by ModelTMitch » Fri Apr 11, 2025 4:02 am » in General Discussion Forum

First post

I have published a Worldwide index of Model T Ford clubs... which will no doubt have some entries missing :D
This index includes the websites of each Club, contact details and addresses where available.
If you know of any that need to be added, please let me know — please ensure you include a website address, physical address and contact...

Last post

Dave,
Thank you for the info, I have removed Fabulous Flivvers .

Mitch,

Please note that the “Fabulous Flivvers” in Bloomfield, NY is no longer active.

Also, thanks for putting this together!

Dave

9 Replies

2268 Views

Last post by ModelTMitch
Wed Jan 14, 2026 7:29 pm
WTB 1914 Model T touring

Last post by kinne96 « Wed Jan 14, 2026 4:40 pm
Posted in Classifieds - Vehicles
Replies: 15
by dunedigger » Mon Oct 06, 2025 1:07 pm » in Classifieds - Vehicles

First post

Looking for a 1914 touring in good running condition although I would consider others. I'm located in Michigan. Not interested if it's painted red. Appreciate any help locating one.

Last post

We have a deceased club member that has a 1914 southern wide track touring that is restored and a great driver. His wife is wanting to sell if you are still looking. Let me know and I'll get photos

Hey don I would be interested in hearing more about this car please feel free to text me five one three 382 nine 7 zero 9

15 Replies

2309 Views

Last post by kinne96
Wed Jan 14, 2026 4:40 pm
FS 1910-13 2pc Driveshaft Housing SOLD

Last post by Henry K. Lee « Wed Jan 14, 2026 2:49 pm
Posted in Classifieds - Parts
Replies: 5
by Tparts » Thu Jan 08, 2026 6:59 pm » in Classifieds - Parts

First post

For Sale is a very nice 1910-13 Two Piece Driveshaft Housing complete ad shown in the photos. Includes the early flange with special boss where the grease cup threads in, Ford Factory number T191 driveshaft spool and front ball. No internal parts included. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Economics and those interested vs inflation.

5 Replies

618 Views

Last post by Henry K. Lee
Wed Jan 14, 2026 2:49 pm
Hall-Scott Ruckstell Shift Lock Assembly

Last post by old_charley « Wed Jan 14, 2026 2:23 pm
Posted in Classifieds - Parts

by old_charley » Wed Jan 14, 2026 2:23 pm » in Classifieds - Parts

This shift-lock assembly is in excellent condition with minimal wear in the shift arm and body. The plunger and spring are new. It should work just fine as it is. This isn't the same one I advertised a couple weeks ago. I'd like $250 for it. Please contact me through the forum email system if you are interested. Thanks.
Bryan Ostergren
Ruckstell...

0 Replies

250 Views

Last post by old_charley
Wed Jan 14, 2026 2:23 pm
New use for T parts

Last post by ironhorse « Wed Jan 14, 2026 2:03 pm
Posted in OT - Off topic
Replies: 2
by Dan Hatch » Mon Jan 12, 2026 10:26 am » in OT - Off topic

First post

My “good neighbor “ the land developer tried to destroy my property corner post with his water runoff “project “.
So I used an old school patch job.
IMG_5221.jpeg

Last post

Now get to thinking how you can rig up a couple of coils to give your good Neighbor a shocking revelation! :twisted:

2 Replies

276 Views

Last post by ironhorse
Wed Jan 14, 2026 2:03 pm
Looking for Ideas (Rear Shocks mounting)

Last post by Craig Leach « Wed Jan 14, 2026 1:48 pm
Posted in General Discussion Forum
Replies: 7
by frontyboy » Sat Jan 10, 2026 3:40 pm » in General Discussion Forum

First post

Have a lowered 1913 Speedster project. Looking for different ways to mount a friction single lever shock to the rear axle.

I will mount the single lever friction shock parallel to the rear frame cross member.
These shocks have no name or markings. The shock has 2 rubber discs between the shock body and the adjustable tension lever. I am wondering...

Last post

Hi Dick,
Google Dan Erceg speedsters. Dan is a artist when it comes to building speedsters & most have Andre Hartford friction shocks on them.
Also look @ Ed Archers Yellow #4 it has Andre Hartford's on it that are a great installation.
Craig.

7 Replies

399 Views

Last post by Craig Leach
Wed Jan 14, 2026 1:48 pm
Water in the Oil

Last post by TXGOAT2 « Wed Jan 14, 2026 10:59 am
Posted in General Discussion Forum
Replies: 33
by John_Aldrich » Sat Jan 10, 2026 5:30 pm » in General Discussion Forum

First post

NOT good.
Pulled the engine to put a rebuilt transmission on.

Put the car back together and when I checked the oil prior to starting the car it had oil in it (I installed a dipstick years ago).

Changed the oil and pulled the head thinking I had a blown head gasket. Replaced the head gasket (didn't really look bad) and reassembled.

Started the...

Last post

How hard a crack, if present, would be to repair would have to be assessed on a case by case examination. It may or may not be practical to repair a crack. There is a wide variety of crack repair methods, from professional jobs such as metal stitching to a great many shade tree solutions and miracles in a bottle.

33 Replies

967 Views

Last post by TXGOAT2
Wed Jan 14, 2026 10:59 am
(SOLD) Springfield Tire tool for Clincher Tires

Last post by jaybee47 « Wed Jan 14, 2026 10:53 am
Posted in Classifieds - Parts
Replies: 1
by WaltM » Tue Jan 13, 2026 1:21 pm » in Classifieds - Parts

First post

(SOLD) Springfield tire tool for clincher tires. Adjusting screw is in good condition. Special tire tool with hook to grab edge of clincher rim. Price $125 plus shipping. Tool measures 15-inches in length. Email, call or text (248) 894-75fiveone. Thanks, Walt

Last post

Walt. I'd like to buy the Springfield tool. Jay.

1 Replies

347 Views

Last post by jaybee47
Wed Jan 14, 2026 10:53 am
FS late style front motor spring mount

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:06 am
Posted in Classifieds - Parts
Replies: 1
by Karl Von Neumann » Mon Dec 15, 2025 1:20 pm » in Classifieds - Parts

First post

Late style engine spring mounts one has the apron bolt snapped off. Few of the top bolts are missing. 25$ each plus the ride

Last post

Move to top

1 Replies

313 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:06 am
FS early front mount

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Posted in Classifieds - Parts
Replies: 1
by Karl Von Neumann » Mon Dec 15, 2025 1:21 pm » in Classifieds - Parts

First post

Early style front engine spring mounts with caps no ubolts sorry. 30 each plus the ride

Last post

Move to top

1 Replies

308 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS brass holley G body

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Posted in Classifieds - Parts
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:49 pm » in Classifieds - Parts

First post

Brass holley g body steel bowl 35$ plus the ride for parts a restore

Last post

Move to top

2 Replies

502 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS iron holley G

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Posted in Classifieds - Parts
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:50 pm » in Classifieds - Parts

First post

Iron body holley g for parts or rebuild 50$ pulse the ride

Last post

Move to top

2 Replies

437 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS front wire wheel hubs

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:04 am
Posted in Classifieds - Parts
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:51 pm » in Classifieds - Parts

First post

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

Last post

Move to top

2 Replies

605 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:04 am
Bulk black era coil boxes

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:04 am
Posted in Classifieds - Parts
Replies: 3
by Karl Von Neumann » Wed Dec 10, 2025 1:50 pm » in Classifieds - Parts

First post

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

Last post

Move to top

3 Replies

603 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:04 am
Wanted 5 or 10 minute Educational lesson on impact of Model T or assembly line

Last post by Daisy Mae « Wed Jan 14, 2026 9:57 am
Posted in General Discussion Forum
Replies: 8
by Hap_Tucker » Mon Jan 12, 2026 8:36 pm » in General Discussion Forum

First post

Bottom Line Up Front:

Our local South Carolina Model T chapter is going to show their T’s to a local college that has an automobile history class (or similar title). Feb 2 or sometime close to that is the date.

Do any of you know of a 5 or 10 minute presentation with PowerPoint slides or pictures that I might be able to download or borrow?...

Last post

While we no longer have an active Model T or A club here on the panhandle, we do have an FSU Branch here in Panama City. I did my fair share as an Engineering Instructer with AT&T and would love to offer something like this. I for one would certainly be interested in your material.
There HAS to be others around here with a T or A, but I've only...

8 Replies

342 Views

Last post by Daisy Mae
Wed Jan 14, 2026 9:57 am
Slight miss and loss of power

Last post by love2T's « Wed Jan 14, 2026 9:23 am
Posted in General Discussion Forum
Replies: 22
by David Payton » Sat Jan 10, 2026 5:47 pm » in General Discussion Forum

First post

Last week my 26 sedan ran so great but this week there’s a slight missing in the exhaust and a noticeable loss of power. And when I shut the engine off there’s a noticeable vapor coming out of the choke. 🫤 shorting out each spark plug seems to have no noticeable change in engine sound.

Last post

David.... Clean the coil unit contacts and coil box contacts with wire brush till they shine. Box contacts can be pulled out slightly to increase pressure on coils for better electrical connections. May have to use wood or cardboard strips to wedge units for tighter fit. As far as spark plug gap I use 0.025 . Lastly, you may want to have someone...

22 Replies

514 Views

Last post by love2T's
Wed Jan 14, 2026 9:23 am
Wanted Rajo B,BB,BBR single inlet updraft manifold with water tube

Last post by Mark Herdman « Tue Jan 13, 2026 7:19 pm
Posted in Classifieds - Parts
Replies: 5
by Mark Herdman » Thu Sep 12, 2024 11:54 pm » in Classifieds - Parts

First post

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

Last post

Look at the bright side. As soon as you fabricate one, you'll find one.😄

Exactly! Happened many a time. Restore what you have first and only make the part as a last resort.

5 Replies

1357 Views

Last post by Mark Herdman
Tue Jan 13, 2026 7:19 pm
WTB Weber Cast Iron Wheel dollies

Last post by Shelbycsx « Tue Jan 13, 2026 6:43 pm
Posted in Classifieds - Parts
Replies: 4
by BobP » Thu Jan 08, 2026 6:03 pm » in Classifieds - Parts

First post

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

Last post

If you decide to sell i'm interested.

4 Replies

421 Views

Last post by Shelbycsx
Tue Jan 13, 2026 6:43 pm
Holley G Pats Pending carburetor

Last post by Corey Walker « Tue Jan 13, 2026 5:12 pm
Posted in Classifieds - Parts

by Corey Walker » Tue Jan 13, 2026 5:12 pm » in Classifieds - Parts

Completely disassembled and cleaned, new venturi, float, float valve, reconditioned spray needle and spray nozzle, throttle shaft bushings installed, crack free bowl, test run. $365 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

175 Views

Last post by Corey Walker
Tue Jan 13, 2026 5:12 pm
FS: Table Load Model T Goodies

Last post by George House « Tue Jan 13, 2026 4:54 pm
Posted in Classifieds - Parts
Replies: 4
by George House » Mon Jan 12, 2026 4:01 pm » in Classifieds - Parts

First post

Beginning Top Left: TT C Cab front and rear corner brackets (2) + 1 curtain frame bracket.$25 Accy cast or forged crankcase ‘ears’ Pat’d April 1918 Zoom In! $40, Pair pan/hogshead/block brackets.$35 Really nice NH Straight Thru Carb and manifold. Removed it and replaced with a U&J Only $350, Powder coated ‘17-‘23 sheet metal radiator lower apron...

Last post

TT corner brackets and pr cast crankcase ‘ears’ spoken for and all boxed up. Thanks Charlie and MTFCA

4 Replies

662 Views

Last post by George House
Tue Jan 13, 2026 4:54 pm
WTB - Coupe Seat Bracket

Last post by EdWhite « Tue Jan 13, 2026 4:45 pm
Posted in Classifieds - Parts

by EdWhite » Tue Jan 13, 2026 4:45 pm » in Classifieds - Parts

Looking for this seat bracket for the passenger side of a 24/25 coupe let me know if you have anything that looks like this thanks.

0 Replies

96 Views

Last post by EdWhite
Tue Jan 13, 2026 4:45 pm
Wood locking steering wheel

Last post by Joe Bell « Tue Jan 13, 2026 4:17 pm
Posted in Classifieds - Parts
Replies: 6
by Wingnut » Fri Jan 09, 2026 7:04 pm » in Classifieds - Parts

First post

Up for sale is an all wood locking steering wheel with key and center horn button all mounting hardware included. Asking $200 plus shipping. interested can text me at 3threezero 24one two6four1. I did try, to no avail, to post pics, go figure, if you text me I will text pics back. Wingnut

Last post

Apco was the horn button on the one I had just like that.

6 Replies

615 Views

Last post by Joe Bell
Tue Jan 13, 2026 4:17 pm
6volt alt with a 8 volt battery

Last post by J1MGOLDEN « Tue Jan 13, 2026 4:03 pm
Posted in General Discussion Forum
Replies: 4
by Schweck1914 » Thu Jan 08, 2026 10:24 am » in General Discussion Forum

First post

Will a 6 volt alternator putting out 40 amps charge a 8 volt battery...

Last post

No one thinks of the Wattage a generator can produce and neither the voltage or current is the limit alone.

You can safely double or halve the generator output, although very few people do that change.

So, for 48 Watts, a 6.4 volt battery can charge at 7.5 amps from the generator.

Wit a 12.8 Volts fully charged battery, you can adjust the...

4 Replies

371 Views

Last post by J1MGOLDEN
Tue Jan 13, 2026 4:03 pm
FS 1909-11 Original Hood Hooks SOLD

Last post by Gleaner « Tue Jan 13, 2026 3:38 pm
Posted in Classifieds - Parts
Replies: 1
by Tparts » Mon Jan 12, 2026 8:51 pm » in Classifieds - Parts

First post

For Sale are a set of 4 original hood hold downs. 2 have very little wear with factory numbers. Please inspect the photos for the condition of each. SOLD for the set of 4. Lang’s 1-800-872-7871

Last post

Email sent

1 Replies

317 Views

Last post by Gleaner
Tue Jan 13, 2026 3:38 pm
Gear casing cracked ford model s

Last post by Gerard_tt_ford « Tue Jan 13, 2026 3:12 pm
Posted in Early Ford Forum - pre-T
Replies: 3
by Gerard_tt_ford » Sun Jan 11, 2026 6:31 pm » in Early Ford Forum - pre-T

First post

Hello all during rebuild of the gearbox i discovered the gear casing is cracked at the pin of the triple gear, does someone tried to repair this or does someone has one used for sale and eventually also a set of triple gears

Last post

Thanks for the feedback i will try to weld it first together with a specialist... we can always give it a try

3 Replies

205 Views

Last post by Gerard_tt_ford
Tue Jan 13, 2026 3:12 pm
121 years ago. When men were men….

Last post by Rob « Tue Jan 13, 2026 2:06 pm
Posted in Early Ford Forum - pre-T

by Rob » Tue Jan 13, 2026 2:06 pm » in Early Ford Forum - pre-T

On frozen Lake St. Clair 121 years ago Henry Ford destroyed the world one mile record. He became the first American driving an American made machine to hold the record.

0 Replies

76 Views

Last post by Rob
Tue Jan 13, 2026 2:06 pm
FS: J. J. Miller Tire Tool for Clincher and Balloon Tires

Last post by WaltM « Tue Jan 13, 2026 1:29 pm
Posted in Classifieds - Parts
Replies: 1
by WaltM » Tue Jun 03, 2025 7:58 am » in Classifieds - Parts

First post

For sale J. J. Miller Tire Tool for Clincher and Balloon Tires. Tool is used to remove and install clincher and balloon tires. The jaws are used to break the bead and the swivel end is used to remove and install the tire. Tool measures 21-1/2 inches in length. Price $140 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

1 Replies

1570 Views

Last post by WaltM
Tue Jan 13, 2026 1:29 pm
FS: Marquette Mfg Co. Clincher Tire Tool

Last post by WaltM « Tue Jan 13, 2026 1:28 pm
Posted in Classifieds - Parts

by WaltM » Tue Jan 13, 2026 1:28 pm » in Classifieds - Parts

For sale Marquette Mfg Co. clincher tire tool. Tire tool for removing and installing clincher tires. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

201 Views

Last post by WaltM
Tue Jan 13, 2026 1:28 pm

Search found 165 matches

Go to advanced search