MTFCA Forum

One complete set of Hayes 26/27 wood spoked wheels. Spokes are very tight. Keyways are not deformed. Rim edges are in great condition. Price for the set is $800. Prefer local pickup; however, can ship. Just know, shipping will be expensive. Mark Chaffin (951) 805 0928

20220813_185308.jpg

20220813_185323.jpg

20220813_185405.jpg

As of August 1st, the contract was signed and now Bill and Shawna are here today getting ready to load all the reproduction parts and machines to its new home, they will have the toll-free phone number 1-888 MODELT1
Also, they will continue making a lot of new reproduction parts, there is a new website they will open very soon; it has been a...

Hi

I'm in the process of making my Touring 1926 made in Canada drivable again.

Looking at the front spring and the shackle made me skeptical. Do these shackles belong to this car? Furthermore, there are no holes drilled for an oiler on the 7-blade spring. The corners of the top two sheets are not broken.
What was original on the Ford back then?...

Anybody interested in a third annual OCF MTFCA Forum Reunion ? We had a great time putting faces to names, seeing our Ts and, meeting. Let me know through the Forum and if there’s enough interest I’ll coordinate. Looking forward to hearing from you.

1FE6B260-8B73-4915-A063-FF2FD963E209.jpeg B3530939-04A8-4760-935F-455EE6448CCF.jpeg 9E2FD4A2-AF53-4305-9A95-64BE476D6329.jpeg A3B2AE0B-03C3-41D5-96E5-178AE8792B73.jpeg

Turtle deck in good condition. In primer, small dent below deck. small crack in picture with #8. Both can easily be repaired. Price is $400.00. Pickup only.

Need the drive gear for a Texas t distributor missing one.

Thanks,
Brian Jordan

It was just a curiosity thing on looking up what engine parts could be bought after the end of T. 1928 parts books, USA the choice of re-building was 5 different Over Size pistons or a complete engine, less starter for $125.00
The 1928 over-seas parts book, Ford Canada, no option of a complete engine but 15 Over Size pistons.

Here is a 2 piece steering wheel, that I believe were used on late 1914s to 1919 before the larger composite wheels took over.

The joints on this one is decent, but needs some regluing. There are some wood defects, that look like they were filled a long time ago. A bit rusty on the spider.

Asking $25 plus shipping to anywhere in the world.

I...

Heres my last hood former spare. Its been bent up a bit and needs straightened, but its solid. HAs some rust and light pitting in places, but should clean up fine

Asking $65 plus shipping to anywhere in the world.

I accept Check, money order. My email is paleobenji@gmail.com for any questions and for my full contact info.

Cheers
Benji

Heres a spare 1915 hood former of mine. I found a complete one with firewall at Hershey last year, so this is surplus. It needs some work as seen. Hood rod holes is a bit worn out, and there may be a slight crack in that area, but its hard to tell. Going to need some hammer work on this one, but it is sturdy, solid, and not rusted through. Some...

Digging out some more parts, and came across an early rear cross member. Used from mid 1913 and before. Looks in great shape, with no thinning anywhere. The square hole for the spring bolt looks good too.

Asking $110 plus shipping to anywhere in the world.

I accept Check, money order. My email is paleobenji@gmail.com for any questions and for...

Here is a lot of 26-27 parts. A steering column thats rusty, but looks solid. One rod looks cut off on the end. Then there are a bunch of extra rods for it as well. All one lot together.

Asking $20 plus shipping to anywhere in the world.

I accept Check, money order. My email is paleobenji@gmail.com for any questions and for my full contact...

Came across one too many Low heads than I need. This one came off a running car according to the fella I got it from originally. Its marked 1915 in pen on one end which is the year of car he had. So, its full of carbon and grime as seen. I did not see any freeze cracks in it, and it looks very nice. Just surplus to my needs now.

Asking $165 plus...

Evening all,

Have a surplus timing cover for non generator blocks. This is the style used in later 1912 up into 1914. In excellent shape with no cracks.

Asking $35 plus shipping to anywhere in the world.

I accept Check, money order. My email is paleobenji@gmail.com for any questions and for my full contact info.

Cheers
Benji

Have another extra tank. This one will need some work. It looks great outside an very clean inside, but has a small hole in one end (see the pics for that). There is also some solder work, and it looks like the holes were attempted to be soldered shut. The sediment bulb connection looks resoldered sometime in the past as well. Some how I ended up...

Looking for a distributor let me know what you have. Philip

Have 2 sets of Carb Adjustment rods. Ill reply with each set in their own post below.

Asking $10 plus shipping per pair to anywhere in the world.

I accept Check, money order. My email is paleobenji@gmail.com for any questions and for my full contact info.

Cheers
Benji

Too many steering wheels, and not enough cars for them!
Here is a one piece (meaning one joint as it being one piece of steam bent wood) steering wheel, that I believe were used on late 1912s to early 1914 before the 2 piece wood rims.

Has a good Spider. The wood is solid in places except for a couple areas that are rough, but malformed.

Asking...

Too many steering wheels, and not enough cars for them! This is my last early wheel.

Here is a one piece (meaning one joint as it being one piece of steam bent wood) steering wheel, that I believe were used on late 1912s to early 1914 before the 2 piece wood rims.

Has a good Spider. The wood is solid, but the joint is loose and needs reglued,...

I know its probably been asked a million times, but what oil do I put in a 1926 Model T? The engine is all original except for the valves. Can I use oil from my local auto shop?

Thanks,

Today was the first of a 3 day tour sponsored by the Keystone Cops club. We're touring the area around Newton Falls, Ohio. Beautiful Amish/Mennonite country, covered bridges, a model train museum like no other, great Amish buffet (gained 5 lbs. I'm sure). Fantastic day. A little rain but no big deal. Tomorrow will be just as nice of a tour,...

I know it’s not easy but Iam looking for parts for the American Bosch distributor. Type T-448. Manly the distributor cap. Part#65942. Also any surviving information books on the distributor. Thanks B6E467FE-99CB-4721-9808-92D022F342D6.jpeg

Iam looking for any information related to the American Bosch front plate distributor. Parts books, installation information and the like. 48CD81C0-7475-4D03-BA7A-8D5FB5EFA56F.jpeg this is a type T448 that I have obtained. Any help is much appreciated.
Bryant

Stewart model 24 speedometer does have a couple dings in case came off a car fifteen years ago and been on the shelf since. $600 obo plus shipping best way to reach me is email bjerm10@gmail.com

After years of false starts, overstated product, and eBay bidding wars for complete lamps that were not right…

I am finally but one piece shy of a genuine set of E&J #8 lamps.

Yeah I know…but if anyone has a scrap lamp or a rusty reflector, or even a decent one…shoot me a PM?

I only need the reflector, but would consider a whole donor lamp...

I hope this works

1915 non-starter runabout. 12 volts for LED tail/brake/signals, and coils only when starting. Phone/hot spot charging. 12v tire pump if needed. Magneto battery charger.

What do you electrical/battery experts think of this?

I just listed my 1915 Model T Racer on the B.A.T. auction site.
Take a look:

Rod
PS:
This is one FAST little car!!!! :D :D :D

Are the hinges for the 1914 windshield,brass or steel? What are the dimensions of the top and bottom frames.

Mine has steel hinges and look like later hinges. When installed and set up it appears to have too large a gap at the center fold.

Any information would be appreciated.

frontyboy

Hi.

I just disassembled my rear end and it's my turn to gather the parts needed for a rebuild. I'm not that experienced with the model t. Was therefore a bit surprised that there is no seal between the differential and universal joint. I have already read in the forum that engine/gear oil can run into the differential. But I think the opposite...

Does anyone have a set of the Keystone reamers like this with a good label? I need a picture of it for mine. Can’t read mine or this picture either. Thanks Dan
00A34BAF-C103-42FF-AF48-FA54DCB7952E.jpeg

There are a few Model T Clubs about.

There are a few Model T parts supplies about.

There are some manufacturers of custom copper gaskets in North America.

There are a couple Model T Fords being driven and maintained.

So, why can't the few clubs that cater to the Model T, approach the custom gasket manufactures and request x number of rare high...

here are two photos. I am seeking bids for the model 30 8 valve head. If shipped the buyer will have to arrange packing and shipping. I am not able to pack. There are 7 pushrods - rest seems complete. See my other Rajo postings for other photos.

Description and prices are as indicated below. Please add an additional $9.50 for domestic shipping per item. Combine several items and save on shipping. Mark Chaffin (951) 805-0928

ROAD GEARS.jpg

ROAD GEARS

1. STEWART 35 tooth #6486 35T 8P $50.00
2. JONES 35 tooth #850 35T 8P $50.00
3. VAN SICKLEN 35 tooth 35T 8P $50.00
4. UNKNOWN 35 tooth...

two more photos. see other postings. do not want to ship. Pick up here in Minnesota. Want you to view. Seeking perhaps $2200. What do you think. This includes the manifold.

Darel

Here are the Rajo head photos

The unsurpassed Dykes Automobile Encyclopedia, famous for 940 pages of great reading ( it is 2 thick). Earlier Model T production era 12th Edition (1921) with the famous Model T Ford supplement section, aircraft, trucks, tractors, motorcycles, carburetors, general engineering, generators, magnetos. and on and on seemingly forever! Nicely indexed...

Looking for a decent brass touring closer to Michigan the better

Want To Buy an auxiliary brake adjustment link. This is the link that attaches to the welded on tab at the bottom of the brake pedal. Evidently, this link is not supplied with/in the Benet Auxiliary Brake package. I know this link is available from a reputable vendor. I will buy one there if nobody has one they want to sell.

Thank You,
Terry

So the first thing I noticed is that the hubcap was filled with grease. Not sure this is necessary. So my first question is: Do you have to have all the grease in the hubcap and all over the nut?

IMG_5959.jpeg

My second question is. How tight do you make the bearing and the nut? I'm used to my Mopars, spinning the wheel while tightening the...

I have been holding this body for a buyer since April, I think it's been long enough.
It is early 1912 Torpedo roadster body that is all original. The body seems solid except for a rust out in the lower right under the seat. Wood is solid. It comes with the top bows and some of the original top. The bows are in perfect condition with no rust. The...

Several days ago, I had the tire removed from a wheel for my 1927 coupe. I then took my five wheels to a local powder coater. I will share some information about the tire and some photos of it and the wheels.

The tire was one of the four tires that had been on the coupe since 1954. To the best of my memory, air had never been added to it nor to...

I have been sending DB emails but no reply. Donnie please check your email, I have a question. Thanks Dan

For sale: never used exhaust manifold $80 plus postage
20220528_174804.jpg 20220528_174754.jpg

Need a couple of gas headlight reflectors as used in 1914 headlights. Used is okay if will polish up. PO of my car (1914 Touring) installed sealed beam bulbs, but the retaining method doesn't allow focusing the bulbs. I want to eliminate the sealed beam bulbs and install the halogen adapter (or LED bulb, if available) for a cleaner look. The...

I have one of the exhaust pipes that Original Smith made a couple of years ago.

I remember reading that it used a somewhat different exhaust manifold than the traditional one the vendors carry.

Does anyone have an exhaust manifold that this exhaust pipe will work with?

I'm making a timeline and comparing the activities, Ford Motor Co. related, of the two major shareholders, Henry Ford and Alexander Y. Malcomson. Of the board meeting meeting minutes I have (1903-1906 when both men were involved with company), I've found one instance where a director made a motion, and not only had the motion fail (infrequently...

So my brother said that old grease (from the 60's and 70's) mixed with modern grease can have a chemical reaction that can cause the grease to become corrosive and damage the wheel bearings. I know all the old should be cleaned out anyway but if that's true and you don't get it all out.........Any thoughts?

Early timing cover (12-14) $40.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20220803_175237.jpg

Weak magneto output afflicts many Model Ts. I wonder if it would be practical to make replacement magnets that fit in the original magneto assembly but had the power and durability of modern permanent magnets. Many portable generators have permanent magnet rotors that operate sucessfully under conditions of heat and vibration at least as severe as...

Late 11' to 12' aluminum transmission cover. No reinforcements around bolt bosses. Pedals in above average condition. Shafts are tight in the holes. Later incorrect inspection cover. Will also need reverse and brake clutch cams to complete. Price was $400 now $300 plus domestic shipping. Mark Chaffin (951) 805-0928.

20220809_170756.jpg...

Speedometer cables and housings. Some housings with drive cables and some without. Description and prices as indicated below. Domestic shipping is an additional $9.50. Mark Chaffin (951) 805 0928

20220814_122602.jpg

1. Stewart housing 63 steel without cable $50.00 SOLD
2. Stewart housing 60 steel without cable $50.00 SOLD
3. AC housing 66...

Does anyone know the length of a new one. I love how my T runs with this timer. The brush is getting quite worn down. No brushes available anywhere, but I’m sure I can make a new one.

There is a nice selection of Model Ts going to Auction on August 27th at the Owls Head Transportation Museum. 1911 Touring, award winning 1913 Touring, 1914 Touring (No Reserve), 1921 Centerdoor, 1922 Roadster, and 2 Ton Trucks (No Reserve)

A young member whom is disassembling a T engine called and asked if there were ever a spacer disk at the transmission & crank union. He described it as looking factory with holes in it aligned with the bolt holes on the crank. Any ideas?

I have been pondering for years a way to circulate extra water to cool the rear cylinders in my speedster engine. I always imagined something similar to a Fronty water manifold fed by a water hose tapped off of the standard water inlet casting. The more I think about it... the more I consider making an authentic Fronty water manifold to do the...

1914 model T Touring, seems to be mostly original body, has newer engine with battery & starter, runs be needs carb cleaned, can use as is or restored $11,000 OBO
call 215-962-9480 in the Phila. Pa. area

Hello Guys, looking to buy and running and driving Model T in Arizona. Any year or body style.

Shoot me an email if you are selling. sbill4768@gmail.com

Thank you

All ten Jan/Feb issues between 1970 and 1979. $20 plus $8.45 for flat rate envelope.

See pic. Paypal or check. Please send PM.

Supposedly in about 10 weeks a run of about 350 copper head gaskets are going to be available…
Anyone confirm this?

Description and prices are as indicated below. All items listed will need restoration prior to use. Please ad an additional $9.50 per item for domestic shipping. Combine items and save on shipping. Mark Chaffin (951) 805-0928

DRIVES.jpg

SPEEDOMETER DRIVES AND BRACKETS

1. JONES MANSFIELD drive 1:1 ratio brass body with 16 tooth gear and...

Thirty-one (31) issues of The Vintage Ford from between Sep/Oct 2016 and Jan/Feb 22.

You paly $19.20 for USPS Large Flat Rate Box

Please send PM. Payment by Paypal or check ok.

I am replacing the felt channels for my 1927 coupe door glass, and it appears this is going to be very, very difficult.

The felt channel is attached to metal channel by a clip at the bottom and a clip at the top. These are shown in the third photo. The top clip is on the left. The metal channel has a round hole and a slot near the bottom which is...

I have a friend with a 13 (no starter or generator) with Mag issues.
History -Restored in Virginia in the 80's and stored in a controlled garage with very little use. Imported to NZ 2015 and only done a few miles since.
Last year it wouldn't run (even idle) on Mag at all. We recharged the Mag in the car and now it runs but not a smooth as when on...

Two eight-inch vases (pink and green). Only flaw is half-inch chip off base of the pint vase. Includes one holder/brace.

Two Phinney-Walker rim-wind car clocks from the 1920s. Both are complete, but not working.

One Mobil Oil advertising tire tread gauge.

One vintage Rainbo Cap cover for dash light. Used, complete and in good shape with...

Ten issues total: Jan/Feb 91, 93, 94. Mar/Apr 91 and 96. May/Jun 80. Jul/Aug 96. Sep/Oct 78 and Nov/Dec 78 and 96.

You pay $8.45 for flat rate envelope cost.

Send PM and check or Paypal.

See pic

for sale, never used stainless steel top irons for a 28-29 model a $250 plus shipping topiron2.jpeg top iron1.jpeg

Like the ad states please let me know what you have excess of. Please send pictures via email if you can.
Best John

Original condition HCCT. Complete, nice gauge face. As found in long term storage. Will probably need new wiring and contacts cleaned and tuned up, but what a find. This is a must have item to have displayed in your shop or collection to impress your T friends. Too heavy and fragile to ship, pick up only in Boise, Idaho. 950.00...

Would like to buy a Spark Ring for this style HCCT. Jim Golden, Bowie, Maryland.

Coil Tester Front.JPG

I'm looking for a couple 30 3 1/2 tires for a project car. I would prefer tires similar to the ones pictured below. These are gum dipped American made Firestone tires. New or low miles please. I need at least 2. I will consider other brands as well. Send a private message if you have any for sale. I will also be at the covered bridge tour this...

Here is a pair of NOS Early Pinion Bearing Races. These are stamped Hyatt see pictures. I took these out of a Ford Dealer in Tn that closed in 1928. When was last time you saw one of these? Extra to me, undertaker will not let me be buried with them.
$50.00 EACH + shipping. Email me at address in pictures. Thanks Dan....

Thinking of installing a Prus head on 24 engine that is stock except for aluminum flat top piston’s - also running a Warford w/ standard gearing at rear. My vehicle is slightly heavier than most, extra power would help on hills but I don’t want to shoot my self in the foot here. Crankshaft & lower end issues ? Head gasket availability also a...

Here is a set of unused Scandinavia band linings. These are the good old “pre-tar baby” ones made by Cantex with proper weave after they bought the company way back when. 22.5 long, includes rivets 50.00 includes shipping lower 48

6EC187F1-66CF-4A71-81D4-182F84AD0665.jpeg

What is the use for this puller? It looks like the spring perch pusher but the jaws are twisted to go around something. Thanks for any help. ---dan thumbnail (1).jpg thumbnail.jpg

Noticed that someone is looking for a distributor cap to fit the Bosch Type 600 on the parts forum. These caps have been hard to find in good condition for some time now. I have a nice NOS one that I have been holding back to be used as a pattern for reproducing them at some point in time. There is a company that I have contacted that will...

This is a very early 1909 exhaust manifold with the large part number 512. It has been repaired and has a 1.5” crack leading from the old repair. I definitely can be repaired, this is a very rare manifold. It is warped about 1/16”. $85.00 plus $20.00 shipping. Kdmks AT att.net.

Original sedan sidelight bracket, 30 shipped lower 48

E0A45371-B35D-46F3-AFE3-70A2E286C82B.jpeg

Reproduction brass roadster tail lamp bracket , 30.00 shipped lower 48
203248AA-9957-40C3-9D3E-E13B29A75382.jpeg

13-14 tail lamp bracket, cast steel reproduction 25.00 shipped lower 48

A6E5F140-8E75-4A38-B381-763F191F63AD.jpeg

Is an adhesive used to bond the door glass felt channel to the metal retaining channel in couples?

DSC00021.JPG DSC00020.JPG For sale. Battery carrier. Part #5150A as shown in Langs book. $40.00 plus freight.

For sale - 2- 30x3 white Firestone tires and 2- 30x3 1/2 white Firestone tires. I have had them five years on my car while it was under restoration and they were on the car for about 20 years fully inflated before it came to me. They are dirty but unexpectedly flexible but it will leave a chalk looking mark on my garage floor. I just removed them...

Here is a spare brass mirror frame and handle parts. Perfect to repair a damaged mirror or to keep in case yours falls off by accident. 40.00 includes shipping to lower 48.

ACAB3083-60CA-42F5-9EE4-33F49000AB3C.jpeg

Here is a complete business with an established customer base. Business includes 700 plus pounds of pre cut copper strips, winding machine, glyptal dip tank, oven to bake finished rings and blast cabinet. All the supplies are included as well as training. Everything is located in western NY state. Everything plus training for 8k. Let me know if...

Good day everyone
I got my first model T running two days ago. It’s a 1911 with an original coil box. When I turn the key from battery to mag I get a spark plug type shock. Is that normal?