MTFCA Forum

IMG_2322.jpeg IMG_2338.png IMG_9326.jpeg IMG_2320.jpeg

For Sale October 1913 Motor. ( Please review photos for condition). $425 with Free delivery to Luray Swap Meet
Lang’s 1-800-872-7871

Hi all,

I'm working on disassembling my 3-speed aluminum Warford to clean it up and to change one of the gears out. The transmission was found in disuse, but inside was well lubricated and in generally good condition. The teeth on one gear were munched pretty bad, but other than that all looks well. The input side nut is being a little difficult...

Hi all,
I'm installing a new top and I'm looking at the correct height of the #2 and #3 bows from the front of the windshield. In period photos, the #2 is almost always lower than the #3 bow. I can't seem to get the #2 bow lower. Mine always seems to be at the same height or above the #3 bow. The drawings I've found show that the height of the #2...

For Sale: Nice original 1914 Ford Manual.

$150 includes shipping to lower 48.

Ford manual.jpg

Wanted: Set of model A roadster windshield stanchions for 1928/29.
Patina or light pitting okay.

Thanks, Clay

For Sale: Stevens NY T-280 One-Piece Valve Lifter. This is the best valve spring compressor tool I have ever used on a Model T. $65.00 plus $5 flat rate USPS shipping in the continental USA. I will accept a personal check or postal money order. First one to PM me gets it. Stevens T280 1.jpg Stevens T280 2.jpg

1913 Ray Wells roadster body new wood ready for body and paint work. Includes turtle deck, Rands windshield, floor boards, firewall and gas tank cover. Windshield supports are not original. 5000$ Delivery possible to Bakersfield, CA swap meet in May. Russ 928.863.8375

I'm looking for a set of rear doors for a 26-27 Fordor. Hoping to locate a pair that are damaged or rusted on the bottom. Not going to ruin good doors. Need to cut off bottom 4-5 inches for a snowmobile project. I'll be in Luray and Hersey.
Brian 586-864-5110.

I am in need of a usable Radius Rod Ball Cap, part number T217. Must be the forged style used from 1909 through early 1914. Please send photos to my email or post here. Thanks very much

We are looking to sell the 14 Touring, 26 Roadster, 27 Roadster. The 27 comes with a enclosed trailer. This car was driven in the last two years.

The 1914 Brass was once owned by James Kenealy (author of the accessories books). Was purchased the car directly from Mr. Kenealy and had it shipped down here to Texas. In transit the shippers...

Selling for a friend! 2 very nice heads...green is '26, black is '24. He replaced them with HC heads is why they're available. $100 EACH plus shipping or wait til Oct when they likely can be delivered by another friend there. PayPal preferred. Our mail is extremely unreliable anymore. Already waiting for a lost check from one of my own sales....

Getting asked if I am human every time I look at a different post in vehicles for sale is a little agravating!:( I am still logged in why so many checks to see if I am alive?

I'm looking for an Atlas water pump, as seen in this photo:
Atlas water pump.png

Does anybody have one gathering dust on the shelf?

Keep crankin',
Eric

Only a few days away. Entice us all with your rare finds.

Andy

Ok y'all got a left field one for you. I got a friend who is looking for a T pickup for his peanut business. we are both owners of A's but he has always wanted a T and since the pickups are just roadsters with the turtle decks taken off i had an idea, are the coupes and roadster turtle decks the same size? if so we might be able to put a wooden...

Selling for my friend..nice oil lamp door.
Repo's run about $100. Blue light special here for $65 plus the ride! Great replacement when yours falls off and busts or have a spare! Prefer PayPal but if you wanna chance a mail check it's up to you! Email me thru my profile please. Thanks

Nice shape just a little cleaning or paint and it'd be new.
$10 plus the ride or can be delivered with Joe to Luray.
Prefer PayPal or leave him check or cash. Selling for a friend.
Email me thru my profile. Tks.

Selling for my friend. Nice Prestolite cylinder. I MAY be able to send it to Luray with another friend. Or wait til Hershey. You know it's heavy! $150. Prefer PayPal as too much trouble keeping with mail but it's your choice. Email me thru my profile please. Thanks

Selling for my friend. This appears to be a new unused shaft..still in a drying out wrapper! Some surface rust but should clean up easily. $75 plus the ride. Prefer PayPal but if you wanna risk a check lost in the mail it's up to you. Email me from my profile please. Thanks.

2 -- 6V starters FS. As described one motors a bit slower. Could just need a good cleaning. Can be delivered to Luray with Joe Bell. $100 for the fast one , $75 for the slow one . Selling for a friend. Prefer PayPal but can send a check if it gets here in time. Still waiting 2 weeks for another fellas check for another product. Our mail here...

Selling for a friend. Here's a real nice tight U Joint for sale. $75 plus the ride. Prefer PayPal but if you wanna risk losing a check in the mail that's fine too. Email me from my profile please. Thanks.

Nice pair of Original 1926 - 1927 Front Fenders. Very solid pair that need very little to be perfect. Please see the photos. New they are $675 each without brackets. $500 for the pair plus shipping. Free delivery to Luray Va Swap Meet.
Lang’s 1-800-872-7871

What is a suitable oil for my fan hub?
It seems like regular 30W or similar oil would seep out. Maybe that is the plan and the reason for the reservoir.

Mike

IMG_2349.jpeg IMG_2346.jpeg IMG_2348.jpeg IMG_2343.jpeg

Ford’s Model K, in addition to being the number one six cylinder car in production numbers in the world for both 1906 and 1907, had other unique features. One was a magneto invented by Ed Huff (who later invented the Model T low tension magneto).
Huff studied Nikola Tesla’s patented theory and invented the world’s first working CDI, or...

Helping sell a 1920s Autokamp trailer for an estate.
A few of you might remember This was posted a while back by Bushmike. It’s now ready to go to a new home.
It’s in pretty good shape, was actually used for camping 8/10 years ago. Has one rip in the main canvas. Here’s a bunch of pictures and a walk around video.

Can also get more pictures...

With the Holidays over and the bitter cold days of Winter dragging along, time to start thinking about Model T activities again. I've been told the Ol Model T Coil Beepers are in short supply and folks wanting one can't get one. If your not familiar with it, the Coil Beeper is a handy little device popular at swap meets to test Model T coil...

I am considering buying a T chassis from someone in Chula Vista, CA. I was wondering if there is anyone traveling up to the Bakersfield Swap meet that would be willing to help transport a Model T chassis. If so, we can discuss what would make it worth it for you. I still trying to work details out with seller.

Matthew

I posted an ad a month or two ago trying to sell these two trucks. Neither sold, so I am reluctantly going to part them out. The '26 is complete but apart, and the '23 is frame, running gear, with a rebuilt short block. I have many other parts including differentials, wheels, a C cab, steel cab for the '26, carbs, generators, starters, cast iron...

This is a brand new in the original box unit ready to mount on your car. It has a built in flip top oiler for easy periodic oiling. Asking $50 plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! Tiger Timer 1.jpg Tiger Timer 2.jpg Tiger Timer box 1.jpg Tiger Timer box 2.jpg

New never used in the original box.One box flap is loose. Asking $45 plus postage.PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING ! eagle timer 1.jpg eagle timer 2.jpg eagle timer 3.jpg eagle timer 4.jpg eagle timer 5.jpg

Does anyone know, or heard if Stipe Machine, ever restarted Model T cam production?

One very good used ignition switch assembly with keys(2), ammeter and wiring harness. $125 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250428_091657.jpg

20250428_091725.jpg

Brake cam set. Two very good arms. Two NOS cams. One has been re-drilled. Two new pins. Price is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250428_092810.jpg

20250428_092726.jpg

One set of brake shoes with lining installed (26/27) and springs. Very good condition. Price is $100 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

20250428_091828.jpg

Eight 5/16-24 brake clevises and six pins in very good condition. Price is $25 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250428_092329.jpg

Steering column firewall and dash support bracket set (26/27) in very good condition. Price for the set is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20250428_092029.jpg

I had the honour of being invited by the President of the Taree RSL Sub-Branch to take part in the ANZAC Day Parade, driving my Model T down the heart of Taree’s main street. Riding alongside me was 99-year-old WWII veteran Dulcie Balderston, who enlisted in the Royal Australian Air Force at just 18 — an incredible legacy of service for which we...

Selling for a friend. Brand new in the box muffler ...steel end.
Over $60+ elsewhere. Blue light special today $50 plus the ride. Prefer PayPal but will take a check if you're willing to risk it getting lost in the mail. Email from my profile please. Thanks.

I’m on the list for a Layne Warford Transmission but haven’t heard back on it. Has anyone out there received theirs yet?

Trailer is getting full. Just two more weeks until the Mid Atlantic Pre-War Swap Meet in Luray VA. Make sure you stop by spaces G-9 & G10 For super deals. Prices to low to list here. Can't wait to see everyone ! Darryl

For Sale Snap-on Valve Refacer. Works smoothly. $400 plus shipping or free delivery to Luray Swap Meet.
Lang’s 1-800-872-7871

For Sale Pair of 23” TT Rear Wooden Wheels with Rims. Please see photos for condition. $400 plus shipping or free delivery to Luray Swap Meet. Lang’s 1-800-872-7871

Nice Ford Script Rear Wheel Puller. $85 plus shipping or free delivery to Luray swap meet. Lang’s 1-800-872-7871

This is a collection of four Magnetos For Sale on Magneto Monday. Look at the pictures closely. $200.00 each plus shipping but for Magneto Monday the first magneto to be purchased will sell for $100.00 plus shipping. Come get these while they last

Thank you for your interest.

R/S,
Jonathan Bodine
406 498 3946

For Sale is a Reproduction Aermore Exhaust Whistle that had been used. Comes with a New Kick Pedal and cable. It has been Glass Beaded and is in good condition. Will need to be painted. $225 plus shipping. Lang’s 1-800-872-7871

As title states, looking a front axle buster facer. NLA from Langs.

Anyone have one they wish to part with?

Thanks!

IMG_1944.jpeg

Very good used and new ruckstell parts. All plus shipping, kdmks AT att.net.

For sale Tucker spoke jack with five shims. Tool measures 8-3/4 inch fully extended and 5-1/2 inch retracted. Good threads. PAT. 5-10-24. Price $80 plus shipping. Email, text or call (248) 894-75fiveone. Thanks, Walt

For sale Marquette Tire Tool for Clincher Tires. Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

This appears to be a Model T key, but doesn't have the center hub . Examining with a magnifying glass reveals no evidence of a rivet being ground down. Any ideas?

For Sale: Model T Starter Switch. $20.00 plus shipping.

R/S,
Jonathan Bodine

Its that wonderful time of the year again!
Time to test and tune Model T coils for the Summer Touring season.

Learning the art of coil tuning is fun and easy to do with the right tools and videos.
Taking an active roll in how well your Model T runs also adds a very satisfying component to the Model T driving experience.

ECCT - Complete Test...

My 1905 (model year) B was produced at the end of 1904, and just recently approved for the London to Brighton run. I plan to make the run this fall. It’s one of only 2 Model B surviving that are eligible, and the first Ford Model B approved.
However, it’s not the first Model B to prowl the streets of London. In 1905 at least 15 Model B were...

Ford script wood wheel hub puller.
Threads are in nice shape.
$85 plus shipping.
Scott Elliott
971-506-9402

FS: one pair Jno Brown Side Lamps (I'm pretty sure they're John Brown) missing the brass tops, fount locking assemblies, and one fount. Some surface rust but no rust-through that I can see. The reflectors are OK, the glass is actually pretty nice. Both lights have jewels on the rear-facing panels, which is kind of nice. The one fount has surface...

I need to put an oil pressure gauge on my speedster. Using a Datsun B-210 oil pump, what oil pressure would I expect? What gauge range should I use?

20250415_155424.jpg

: ^ )

Keith

Looking to change the oil in the Warford transmission. This is an older aluminum unit. Does anyone know the capacity so I know how much to order?
Thanks

I think I installed my clutch release ring in the incorrect location but wanted to confirm before pulling everything apart again. Is the location, as pointed out in the handbook (pictured below) the same as where I put the arrow on my picture? Thank you in advance!

Where on the frame would be the best place to mount a starter solenoid? If you have one installed, would you please post a photo? Thanks.

WTB good small drum Ruckstell axle or complete kit to convert rear axle to a Ruckstell (19-25).

The manifold is in excellent condition, the ports look unused. The plunger spring takes more effort than first expected but it needs to cause the short burst of fuel. The green tap is preventing a new ferrule from sliding off. Have everything else per the parts list except the supply elbow and 3/8 supply line. These parts, from the plunger to your...

This is a collection of four Magnetos For Sale on Magneto Monday. Look at the pictures closely. $200.00 each plus shipping but for Magneto Monday the first magneto to be purchased will sell for $100.00 plus shipping. Come get these while they last

Thank you for your interest.

R/S,
Jonathan Bodine
406 498 3946

In honor of Model A Monday reducing price by just over 10% for Monday, April 28, 2025 only. Will honor purchase price of $15,000 for April 28, 2025 with firm commitment to purchase (15% deposit). One day only pricing.
This is a quite early 1928 Model A roadster; motor number of A20XXX making it a February 1928 manufacture car which would be...

Mark your calendar July 13 be in line by 9:30 for 10:00 boat, Miller Ferry is asking to purchase tickets ahead so they have a head count for that day, last year 58 said they where coming and only 38 showed up, Miller ferry supported two boats expecting that many and not needed after all.

I am working on a 1914 roadster which has the original horn and tubing, both in great shape. The horn bulb however, is long gone and only the brass base of the bulb is left. I see that the vendors offer a 4 inch and a 3 inch diameter bulb. Which one is correct for this application for the 1914?

I was breaking down an early transmission/flywheel assembly and got a little surprise.
One of the magnets came off in two pieces!
It looks like it's an original assembly as indicated by what appears to be the original lock wire.
There was no indication the magnet was broken.

Yup - They're out there.
 
Magnet.JPG

Wanted: Canadian 26-27 rear bumpers, the bumperetts . I can pick up at Lauray on Friday. PM me if you have them.

Cures rips, tears, snares, corns, callouses, and beats back bad breath

not really

but it WILL make your car go up steep hills even with a low gas tank, and make vapor lock a thing of the past. You will never encounter a 9 gallon hill again, with a float valve that REALLY FLOWS. If you're really unsure if they work, just ask the guy who just...

Motor kicked back a bit when starting, now won't turn over (sounds like it's trying). Battery, switch, power to starter seems ok. is the bendix jammed into the flywheel?

A friend has a problem that may relate to the TT Truck Rear Axle Ratio.

His TT Truck goes slower than most with a top speed of 12 miles per hour.

The rear axle ratio must be printed someplace, but I cannot find it.

The Model A used the same rear axle with different wheels.

Would that axle in a Model T make it run slower?

Are you bringing any of this type tire to the Homecoming, Richmond, IN?

If so, let me know so I can plan to come.

Thank you.

Bill Everett

Model T Whitewall Tire 30X3.jpeg

Model T Whitewall Tire 30X3.jpeg

Are you bringing any of this type tire to Luray? I need two (2) 30 x 3.

If you have a couple of them, or even one, please let me know so I can plan to come.

Thank you.

Bill Everett

Here is a set of Ford script rear spring shackles for a TT truck. They don’t show much wear, some pitting. Media blasted and ready for paint.

$20 plus shipping in the U.S.

IMG_6625.jpeg

IMG_6626.jpeg

I purchased three U & J carbs last year as a lot, from one of our Forum posters (thank you). One of them had been all but destroyed. The main jet was bored out and extended up into the venturi like a submarine periscope; the venturi was removed completely and replaced by a cobbled up hunk of aluminum.

The void where the main jet was crudely...

Well, here’s the answer.

They were made with a dovetail glue jointing machine. One picture is the original rear seat heel panel from my 22 sedan. It’s made of two pieces jointed together.

The other is the piece that the rear seat cushion sits on. It is made of three pieces jointed together with one of the pieces having a completely different...

For Sale: Model T Jack with Ford Script

Jack works but I found a hair line crack.
Look at picture and crack is between the top two openings for screw shaft.

$20 plus shipping

T jack.jpg

Selling for my friend. Here's 2 different assortments of gaskets. Look for letters A & B on cardboard flap to the right. Prefer PayPal but if you wanna risk a check lost in the mail that's fine! Email me from the profile please. $20 PER SET plus the ride. Thanks.

Nice original 1925 roadster. Good solid body, complete car. It’s been sitting 3-4 years, I have it running 3 months ago. This is a nice solid car. $8500.00 located in Colorado Springs. Kdmks AT att.net.
None of the other cars in the background are for sale, I can get more pictures.

Saw this today and was wondering if this still goes on. Is the T group still around as the MTFC inc. Maybe before it was changed to MTFCA or?

Free: 1/4-20 x 1/2 fin-neck carriage bolts, zinc plated steel. These have fins, apparently for digging into soft material, as opposed to the more common square shanks just below the head. A USPS Small Flat Rate Box will hold about 400 pcs.

Still got a few of these left. They're yours if you pay shipping.
I apologize again if this is slightly...

I was down in one of my buildings getting stuff for Luray and saw a 1912 complete transmission I have been keeping.
It is dated June 1912. (See picture).
Everything visible is marked DB. Even the dated main shaft if I remember correctly, it is on bottom and I don’t want to move it.
If anyone is interested I can bring it to Luray, but will not...

Is the Turbo400 Inner Clutch Disk a thing of the past or is someone still making them?

I am having a problem finding one.

I have a stock pile of gastanks round oval and cowl tanks (no squares) all are used all are reasonably priced round and oval are 75$ plus the ride and cowl tanks are $125 plus the ride I can provide pics of individual tanks if needed straps mounts and caps are extra

Nice window post paint is all scratched up good shape otherwise 60$ plus the ride

SOLD These came with a pile of TT parts. I’m guessing they were mounted to the outside of the cab. The are different styles but the mounting holes are the same distance apart. If you bolt them on opposite sides no one will ever notice they are different! They both have some rust pitting.

SOLD $20 plus shipping in the U.S.

IMG_6629.jpeg...

Anyone interested in a nice little lamp? Selling for my friend. $25 plus the ride. Prefer PayPal but will take a check. Email me from my profile please. Thanks.

Years ago I had armature's rewound and sold them over the forum. Therefore I got a bad cores back from people. Is there anyone that would want them for $7.50 each?
I can bring them to Luray. Not sure how many I have but I will see. Email by forum. Dan

The 11th annual Luray swap meet is just around the corner. We are on track for another great swap meet. We are currently @ 110 vendor spaces sold. More spaces are still available. Put these dates on your calendar, you won't want to miss it!!!

Unrestored pair of Victor Model 2 side lights with brackets. The glass is good with no cracks or chips. The light for the right side has a shallow dent in the metal panel. Price is $175 plus shipping. Please send me an email.
20250425_205315.jpg
20250425_205407.jpg
20250425_205504.jpg

Hi all,

I’ve had my T for 13 years of pretty trouble free driving, but having trouble today! I drove it today and ran great, and I was getting it ready for spring maintenance and pulled back in the garage. I took off my Ford timer to lubricate, and put back on. No start, maybe a random spark or two but not enough to start. Pulled off a dozen...

Here's what appears to be a never used steering stabilizer selling for a friend. They're around $120 so let's see if someone will steal it for $95 plus the ride. Email me from profile. Prefer PayPal as our mail is extremely unreliable, but if you're willing to risk it that's fine!